How to use the Combobox selection to check one of the six boxes?

Similar Questions

• How to use the Bypass box?

  If we click the right button on a video image / sound, four options appear: Motion, opacity, Volume and Balance.

  Balance has a check box and a blue clock icon.  Checking the box and play with the clock.

  I don't find any filter bandpass, neither high nor low.   How can I activate the bypass filter, please.

  The derivation that is not mentioned in the official manual or the classroom in a book.

  Production of an intense film of a Cambodian circus.  Edit in DC.

  Currently using 10 PE.  At the end of this huge project, intend to go for 14.

  vumadave

  Just my visits on the first Forum of elements from today and see your answers.

  Thanks for the replies. Are you still OK with by-pass of Volume? Looks like progress. But if necessary, I'll go through a specific example the effect you're looking for. Just to confirm the details of what you are looking for.

  Best wishes

  RTA

• How to use the instruction box in where clause

  Hi all
  
  
  I need to use cases where clause guide me please how I can do it.
  
  
  AND WHEN BOX: KAPCO = "KAPCO" THEN cla. CLASS_NAME LIKE '% KAPCO % '.
  WHEN: KAPCO = "NON_KAPCO" THEN SUPERIOR (cla. CLASS_NAME) NOT LIKE '% KAPCO % '.
  WHEN: KAPCO = 'ALL' GOLD: KAPCO IS NULL SO SUPERIOR (cla. CLASS_NAME) LIKE '% '.
  END
  
  
  
  Concerning
  
  Published by: user10941925 on March 4, 2012 22:31

  Hello

  CASE expressions return a single value, for example a VARCHAR2. They do refer to code fragments.

  You usually don't need (or want) an expression BOX in a WHERE clause, or any other condition. I think that you were trying to do the equivalent of:

  AND     (     (:KAPCO = 'KAPCO'          AND cla.CLASS_NAME       LIKE '%KAPCO%')     -- Don't you want UPPER on this line?
       OR     (:KAPCO = 'NON_KAPCO'           AND UPPER(cla.CLASS_NAME) NOT LIKE '%KAPCO%')
       OR     (NVL (:KAPCO, 'ALL') = 'ALL'       AND cla.CLASS_NAME IS NOT NULL)
       )
  

  If you would care to post some sample data (CREATE TABLE and INSERT statements) and the results desired from this data, I was able to test this.

• using the function - how to use the values of the input variables on the table select statement names

  Hello community, I have a problem when creating a function. The purpose of this function is to check the table of weather gave yesterday or not. We must check this on different tables on different sachems. We are creating a function with input variables.

  CREATE OR REPLACE FUNCTION IN_SCHEMA.IS_YDAYDATA_TO_TABLE

  (

  in_schema IN VARCHAR2,

  in_tablename IN VARCHAR2,

  in_datefield IN VARCHAR2,

  )

  RETURNS INTEGER

  AS

  -Declaring variables

  v_is_true INTEGER.

  BEGIN

  SELECT

  CASE

  WHEN MAX (in_datefield) = TRUNC(SYSDATE-1)

  THEN 1

  ON THE OTHER

  0

  END

  IN

  v_is_true

  Of

  in_schema.in_tablename

  ;

  RETURN v_is_true;

  END;

  /

  When creating, I got error: [error] ORA-00942 (44:19): PL/SQL: ORA-00942: table or view does not exist

  How to use the values of the input variables on the table select statement names?

  Hello

  Here's a way you can use dynamic SQL statements for this task:

  CREATE OR REPLACE FUNCTION IS_YDAYDATA_TO_TABLE

  (

  in_schema IN VARCHAR2,

  in_tablename IN VARCHAR2,

  in_datefield IN VARCHAR2,

  in_first_date DATE DEFAULT SYSDATE - 1,.

  in_last_date DATE by DEFAULT NULL

  )

  RETURNS INTEGER

  AS

  -IS_YDAYDATA_TO_TABLE returns 1 if in_schema.in_tablename.in_datefield

  -contains all the dates in the in_first_date of the range through included in_last_date

  - and it returns 0 if there is no such lines.

  -If in_last_date is omitted, the search only the data on in_first_date.

  -If in_first_date is omitted, it defaults to yesterday.

  -Time parts of the in_first_date and in_last_date are ignored.

  -Declaring variables

  sql_txt VARCHAR2 (1000);

  v_is_true INTEGER.

  BEGIN

  sql_txt: = 'SELECT COUNT (*).

  || 'FROM ' | in_schema | '.' || in_tablename

  || 'WHERE ' | in_datefield | ' > =: d1'

  || «AND» | in_datefield | '< >

  || 'AND ROWNUM = 1';

  dbms_output.put_line (sql_txt |) '= sql_txt in IS_YDAYDATA_TO_TABLE");  -For debugging

  Sql_txt EXECUTE IMMEDIATE

  IN v_is_true

  With the HELP of TRUNC (in_first_date) - d1

  TRUNC (NVL (in_last_date

  in_first_date

  )

  ) + 1                -- d2

  ;

  RETURN v_is_true;

  END is_ydaydata_to_table;

  /

  DISPLAY ERRORS

  If you must use dynamic SQL statements, put all the SQL statement in a single string variable, such as sql_txt in the example above.  In this way, you can easily see exactly what will be executed.  Comment out the call to dbms_output under test is completed.

  Try to write functions that will address not only the question that you have now, but similar questions that you may have in the future.  For example, now that interest you only to the verification of the data of yesterday, but later, you might want to check another day or range of days.  The above function combines the convenience of a function simple (looks like yesterday data if you don't tell him otherwise) with the power of a more complex function (you can use the same function to check any day or range of days).

• How to use the selection tool to resize a text box? Before I was able to click on the text box with the selection too in order to resize, but now I click on it and it only gives me 'path' or 'anchor' options.

  How to use the selection tool to resize a text box? Before I was able to click on the text box with the selection too in order to resize, but now I click on it and it only gives me 'path' or 'anchor' options.

  Ashley,

  What about window > show the rectangle enclosing (Ctrl / Cmd + Shift + B to toggle)?

• How to use the Multiple selection in ADF faces

  I have, I want to know how to use a multiple selection (ADF select several choices) for updating the database.

  by mentioning your exact jdev version.

  As far as I know he in not possible automatic update select a choice that she returns a list which you must map back to the lines of the table yourself.

  Timo

• How to use the Type of Oracle Table values in the Select statement.

  Hello
  
  I get the initial set of values in the Table of Type Records of the Oracle and want to use the list of values in the Select statement.
  
  For example, try something like the following:
  
  TYPE t_record () IS RENDERING
  ID TABLEA.ID%type,
  NO TABLEA.NO%type
  
  );
  v_record t_record;
  T_table TYPE IS the v_record TABLE % TYPE;
  v_table t_table;
  
  -Code to fill the values of v_table here.
  
  SELECT ID, NO, COLLECT in BULK IN < some other table variabes here > FROM TABLEA
  WHERE ID IN (i) v_table USER.USER;
  
  I want to know how to use the Type of Oracle Table values in the Select statement.

  Something like this:

  create or replace type t_record as  object (
  id number,
  no number
  )
  /
  
  CREATE or replace type t_table AS TABLE OF t_record;
  /
  
  set serveroutput on
  declare
  
    v_table t_table := t_table();
    v_t1 t_table := t_table();
  
  begin
  
    v_table.extend(1);
    v_table(1).ID := 1;
    v_table(1).No := 10;
  
    v_table.extend(1);
    v_table(2).ID := 2;
    v_table(2).ID := 20;
  
    SELEC t_record (ID,NO) BULK COLLECT INTO v_t1
    from TableA
    FROM TABLEA
    WHERE ID IN (select t.ID from table(v_Table) t);
  
    for i in 1..v_t1.count loop
      dbms_output.put_line(v_t1(i).ID);
      dbms_output.put_line(v_t1(i).No);
    end loop;
  end;
  /
  

  No test!

  P;

  Published by: bluefrog on March 5, 2010 17:08

• I'm not clear how to use the recovery CD

  I added all the space using my HDD is it comes about 12 GB, I have 27.9 GB of disk space, but my drive has only 1.80 left disk space. I made clear to solve this problem. Basket is empty, I ran disk cleanup.

  A computer expert suggested that Windows might have become confused and cannot recognize what place I save, it might be because I ran a program called Cyberscrub often. His solution is to reload Windows XP home. My laptop came with recovery discs, everything else is already loaded. I have so much I don't want to lose on my laptop. If I use the recovery discs, I will lose everything on my computer, am I better off buying Windows XP home and re-load, in which case I will not lose my job?

  Also I am not clear how to use the recovery discs, I can't find instructions on what you are doing.
  The only person who could help me went to travel and not reachable.
  Any help greatly appreciated
  Lorraine Hart

  It of a very simple to recover the laptop.
  Just boot from the recovery CD and follow the instructions on-screen ;)

  I put t know what version recovery CD you have, but the older one provides the standard and expert mode. In expert mode, you can choose you partition where the OS is to be installed.
  So in this case only the selected partition will be formatted!

  But have you checked the size of the HARD disk in disk management?
  Simply click on the my icon my computer and choose manage.

  Of course, you could remove the internal HARD disk and it could connect to the external USB HDD controller. Then, connect the drive HARD to the second PC and you record data on another HARD drive.

• How to use the OEM grid control to find databases, not in archivelog mode?

  Hello
  
  We have currently 130 databases, say, if I want to come off as any database currently NOT in archivelog mode, is there a quick way to find out?
  
  using the OEM grid control
  
  or
  
  a similar trick,
  
  but really do not need to manually check each database.
  
  Thank you very much!

  This query works in 12 c - please run as SYSMAN.
  It is based on undocumented assumptions well + (AND key_value = "NOARCHIVELOG") +.

    SELECT *
    FROM SYSMAN.MGMT$GROUP_DERIVED_MEMBERSHIPS O ,
      SYSMAN.MGMT$TARGET T ,
      sysman.MGMT$AVAILABILITY_CURRENT st
    WHERE
    o.member_target_type     IN ('oracle_database', 'rac_database')
    AND ( t.target_type           ='rac_database'
    OR (t.target_type             ='oracle_database'
    AND t.type_qualifier3        != 'RACINST'))
    AND o. member_target_guid     = t.target_guid
    AND t.target_guid             = st.target_guid
    AND st.availability_status    = 'Target Up'
    AND ( EXISTS
      (SELECT *
      FROM sysman.mgmt$metric_current i
      WHERE I.TARGET_GUID = O.MEMBER_TARGET_GUID
      AND metric_name     = 'archFull'
      AND Metric_Column   = 'archTotal'
      AND metric_label    = 'Archive Area'
      AND column_label    = 'Total Archive Area (KB)'
      AND key_value       = 'NOARCHIVELOG'
      ));
  

  Another way to achieve the goal is to push the extended parameters (SELECT LOG_MODE FROM V$ DATABASE) on each DB and monitor the values they return to the repository. This is an example for a (slightly) different problem - http://iiotzov.wordpress.com/2012/08/08/how-to-use-the-new-oem-12c-metric-extensions-to-enforce-enterprise-wide-custom-policies.

  OEM repository has many other uses grand-http://iiotzov.files.wordpress.com/2012/05/oem-repository-a-second-look.doc, http://iiotzov.files.wordpress.com/2011/08/iotzov_oem_repository.pdf

  Lordane Iotzov
  http://iiotzov.WordPress.com/

• How to use the search otherwise condition as

  Oracle 9i
  
  Hi all
  
  I work in the management of control here, we have a table named as OE_ORDER_LINES_ALL and the name of the column called UPI, and its length is 16 tank.
  
  Now the customer has the UPI with 13 tank and now, I need to check if all the IPUS are in the table.
  I have almost 600 of the UPI and I can't able to use as an operator. Y at - it one option other than as an operator.
  
  For example
  
  Resemble UPI this 050 009714373007G, but the customer gave this G 009714373007.
  
  Is there a UPI then I would use like this
  
  "Select upi in oe_order_lines_all where the upi as ' 009714373007 G %.
  
  If there is more than 2 UPIs how to use the search condition
  
  Any help is highly appricatable
  
  Thanks and greetings
  Srikkanth.M

  If you know that you will benefit from a number of values of UPI 13 characters and you should look for if there are rows in the table that match the 13 first characters

  select upi
    from oe_order_lines_all
   where substr(upi,1,13) IN( '009714373007G', <> )
  

  Justin

• How to use the capture and the print button

  I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?

  Thank you

  Andi Starbuck

  That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?

• How to use the utility disk first aid for hard drive internal el captian

  How to use the utility disk first aid for hard drive internal el captian

  Select the drive and click first aid.

  If something is not repairable because this is the system drive, then you need to start using the recovery partition and run disk utility it.

• Re: How to use the webcam on my C50-A-19U Satellite?

  I don't know how to use the webcam on my Satellite C50-A-19U.
  Help, please.

  Message was edited: assignment has been translated

  Hello

  I assume that you are using the original version of Windows pre-installed so good description how to use build-in webcam, you can find here.
  Check it out.

• I use Windows 10 and use the Canon SX20 IS. How to use the function of Photo stich?

  I use Windows 10 and use the Canon SX20 IS. How to use the function of Photo stich?

  Is it possible to get the procedure to use feature stich photo?

  Will be Zoombrowser EX for windows 10 wotk?

  If any expert can guide me... that will be great.

  Hi Sat17,

  Thank you for your inquiry.

  For Windows 8 and beyond, ZoomBrowser EX has been replaced by EX. ImageBrowser

  Your software you will need to updated for Windows 10.

  You can access the software for your camera by clicking here.  Once on our site, scroll down to "Drivers and downloads", then use the drop down menu to choose "8.1 Windows" or "Windows 8.1 (x 64)".»  Your camera software has not been updated for Windows 10, but for Windows 8.1 software will run on your computer.

  To update your software, click the [Select] button to the right, then click on "How to download and install" for installation instructions.

• How to use the automatic configuration wizard and where can I FIND?

  How to use the automatic configuration wizard and where can I FIND?

  Hi TannySmedt,

  To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel. If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools. If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic. This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the automatic Wireless Configuration service zero wireless and click on the OK button.

  The automatic Wireless Configuration can also be started and stopped from a command prompt. To start the automatic Wireless Configuration, run the following command:

  net start wzcsvc

  To stop the automatic Wireless Configuration, run the following command:

  net stop wzcsvc