How to use the utility disk first aid for hard drive internal el captian

Similar Questions

• Can not start up and the utility disk first aid failed

  I have an iMac 27 "retina 5K (end of 2015) El Capitan (10.11.2) and 10 Windows via Bootcamp.   This morning when I had finished work on the Windows of the machine side, I tried to start in El Capitan, but it failed silently and turned off the machine itself about the 2 minute point.  I tried new and same problem.  So I checked if I could go back to Windows and ran 10 Windows without problem.  Then I started in the Mac recovery partition to run disk utility and it revealed a considerable number of errors on the Macintosh partition such as:

  -Previous ID in a string of hard link is incorrect (ID =-1130612101)

  (it should be 3164355194 instead of 0)

  Several of the above errors appeared with different numbers

  -Volume bitmap minor meds of repair for orphans blocks

  -County of block free invalid volume

  -Volume header needs minor repairs

  -Lack of notice of thread (id =-1130634630)

  Several of the above errors appeared with different numbers

  Finally the process 'done' with the 'first aid process has failed.  If possible to backup the data on this volume.

  Then I started in an installed USB version of the El Capitan, and while it was successful, he launched a warning when he mounted the volume that I had the problem with: "OS X cannot repair the disk"Macintosh HD"" but I was able to copy the files from this volume and even run applications that have been stored on it.  Tried to run disk utility and first aid in vain as above.

  So here are the questions.

  1 should I guess that nothing can do otherwise erase that partition and reinstall El Capitan?

  2 delete the partition and reinstalled El Capitan will affect my Bootcamp partition or the ability to use Win 10?

  3. I have a Time Machine backup. restore it re - will present the same problem?

  4. I have never had such a massive and unrecoverable failure on a Mac drive and I had used it the day before without problem.  Should I assume that the drive itself is defective and have it replaced?  I ran an Apple Hardware Test and were not problems.

  1 fix

  2. Yes

  3 NO.

  4 NO.

  Back up all data on this disc, including your Bootcamp partition.

• How to use the USB 32 GB as a hard drive?

  * Original title: USB key

  Hello

  I want to use my sandisk 32 GB pendrive like a hard drive. How to use it. and I want to install win 7 on USB and start my computer with USB. Please guide me

  Thank you

  Ashok

  9887180699

  You can create a Windows repair flash disk, but Windows itself does not run on a flash drive. It requires an internal drive.

• How to use the photos saved on a new hard drive after a hard drive failure?

  My external hard disk drive is crushed when I imported and saved my photos to Lightroom.  The Lightroom catalog was not on this disc.  I had saved pictures.  I copied the photos and the structure of accurate records on my new hard drive.  Just use the 'Find all my files' option in Lightroom?

  Thanks for any help.

  Thank you!

  It worked, but my structure is as follows:

  Photos from Lightroom

  2004

  Jan

  Feb

  2015

  Jan

  Feb

  Softball Sting

  In Lightroom, only individual folders appear.  I have nearly 100.  Is it possible to change the display, so I only to recreate a link to the folder Lightroom Photos instead of each individual file?

• How to use the utility of recognition of face on Satellite L350D

  Hi all

  I am trying to understand how to use the utility on my laptop satellite L350D-131 face recognition but won't have any look.

  Can someone tell me how to use / start this feature please?

  It should come a manual or a tutorial how to use this tool. I'm not an expert in the field, because I saw this feature only on a laptop in the stores. But it is a security feature nice little addition to the fingerprint system.

• Satellite U300 - how to use the recovery disk?

  I inserted the recovery disc 1 and then restarted my computer, but nothing happened.
  I really need to fix my cause cell it's time to review!

  Does anyone know how to use the recovery disk or affecting function press when the laptop starts to use the programmed recovery?

  Thank you!

  Hello!

  If you have inserted the recovery disc you must only start her everything that s!

  I m not sure but I think you can go into the advanced boot menu if you press F12. Alternative change you the boot priority in the BIOS. You can access BIOS by pressing F2.

  Good bye

• How to use the utility "Windows Chat" Window XP (between two computers or more)?

  How to use the utility "Windows Chat" Window XP (between two computers or more)?

  Please provide your suggestion step by step

  Hello

  Maybe this can help, http://support.microsoft.com/kb/308232

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• 'ERROR 01' as I have only 66 MB of free space on my MacBook Air: (how to load the external Creative cloud on a hard drive software?

  I bought the full package, but I couldn't get it to load on my laptop.

  So my question is:

  How to load the external Creative cloud on a hard drive software?

  Or do you spend, how the "Installer Creative Cloud' to load it on an external hard drive?

  Thanking you in anticipation.

  : )

  you have the cc office application installed on your computer?

  If not, install the - apps Download Adobe Creative Cloud | CC free trial Adobe

• El Capitan utility disk first aid fails - unable to unmount the volume for repair

  Question: Given the following error with Disk Utility first aid and success with diskutil check volume, I should consider my drive damaged or volume?

  After a crash of the system on my Mac mini (end 2012) running that OS X El Capitan 10.11.3 has experienced a kernel panic induced by the adapter USB Wi - Fi, I dutifully ran first aid utility disk on each volume on the disk, in order to ensure the integrity of system files.

  What I feel with disk utility (GUI) first aid:

  First aid process has failed. If it is possible to backup the data on this volume.  Click OK to continue.

  Check the storage system

  Volume control

  disk4s2: search Volume headers

  disk4s2: search for disc labels

  12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 group of logical volumes on 1 device

  disk4s2: search the Volume metadata

  Logical volume group has a Volume of metadata 24 MB with double redundancy

  Start the analysis of the metadata for a valid checkpoint

  Load and check the Segment headers

  Load and check the payload control point

  Load and check the Transaction Segment

  Incorporate 0 most recent checkpoint operations of no

  Load and check the virtual address Table

  Load and check the use Table Segment

  Load and check the Metadata Superblock

  Load and check the volume logic B-trees

  Logical Volume group contains 1 Logical Volume

  Load and check 3D8DB35F-FA41-4A58-BA33-84A2C08FEE93

  Load and check 1CD6382C-9DF5-44E6-8C66-1CDC3DE5DB8A

  Load and check the summary of Freespace

  Load and check the accounting of block

  Load and check out virtual addresses live

  New control point of transaction commit is valid

  Load and check the Segment cleaning

  The 12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 volume seems to be OK

  Checking storage system exit code is 0

  Updated support for the volume partition that

  Impossible to disassemble for repair volume

  Operation failed...

  (underlining)

  Additional information: I didn't have any problems with this disk volume. I use it only as a Time Machine backup destination. It is an encrypted volume OS X Extended (respect for case-sensitive). My concern involves only disk utility complaint that its "first aid process has failed."

  After reading the complaints in other forums that utility disk on El Capitan has been "dumbed down" and can not perform many of the functions that the utility of the same name used to be able to perform in previous versions of Mac OS (complaints, I can't confirm because I'm relatively new to MacOS - although extremely in computing with Windows, UNIX and Linux) (, so I didn't get to use disk utility a lot, before El Capitan), I decided to do the same "check the volume" that I knew first aid was trying to perform with the diskutil command-line app.  Guess what? No error!:

  What I have experienced with command-line diskutil:

  sudo diskutil verifyvolume disk9

  Audit file system began on disk9 6TBMacOS_1_Archive

  Check the storage system

  Volume control

  disk4s2: search Volume headers

  disk4s2: search for disc labels

  12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 group of logical volumes on 1 device

  disk4s2: search the Volume metadata

  Logical volume group has a Volume of metadata 24 MB with double redundancy

  Start the analysis of the metadata for a valid checkpoint

  Load and check the Segment headers

  Load and check the payload control point

  Load and check the Transaction Segment

  Incorporate 0 most recent checkpoint operations of no

  Load and check the virtual address Table

  Load and check the use Table Segment

  Load and check the Metadata Superblock

  Load and check the volume logic B-trees

  Logical Volume group contains 1 Logical Volume

  Load and check 3D8DB35F-FA41-4A58-BA33-84A2C08FEE93

  Load and check 1CD6382C-9DF5-44E6-8C66-1CDC3DE5DB8A

  Load and check the summary of Freespace

  Load and check the accounting of block

  Load and check out virtual addresses live

  New control point of transaction commit is valid

  Load and check the Segment cleaning

  The 12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 volume seems to be OK

  Checking storage system exit code is 0

  Check the file system

  Using the live mode

  Perform direct verification

  Logged more HFS volume control

  Detected a case-sensitive volume

  Checking extents overflow file

  Check the extended attribute file

  Checking volume bitmap

  The 6TBMacOS_1_Archive volume seems to be OK

  File system check exit code is 0

  Finished on disk9 6TBMacOS_1_Archive file system check

  I will finish success of diskutil verifyvolume that my disk volume is not serious and that Disk Utility first aid simply does not correctly?

  Thank you!

  -IlDavo-

  I think you might be able to do a repair of first aid, after you have disassembled the drive first:

  1. Run OS X by an external device (ex: USB mode, or external hard drive or disk target from another Mac)
  2. Launch the Terminal and run the following command umount f /Volumes/ (ex: umount f/Volumes/Macintosh\ HD)
  3. Then run disk utility first aid.

  I had this problem on a Macbook Air, I tried to recreate the image to work, so I didn't need to get anything off the drive. I tried to format the drive and reinstall OS X. So I don't know if first aid work after disassembly, but it worked without a doubt after that I did the first two steps above and then deleted from the disk. Not sure if this will help, but worth a try, I guess.

• Satellite M300 - how to use the recovery disk

  Hello world

  I was wondering how to use the 2 recovery discs that I burned recently if I wanted to fix my USB ports (as seen in my Toshiba M300 - wire to USB ports)

  Any suggestions?

  Hello

  You can use the only recovery disk to reinstall the whole OS!
  This means that the use of the recovery disk will format the whole HARD drive and will set the laptop back to factory settings!

  If you want to use the recovery disk and then insert it into the ODD and the start-up of this disc.
  Then the installation of the OS should move forward and you should follow the instructions on the screen.

  All that s

• How to use the find method to search for character format substitutions and FMP?

  I strongly suspect that I should be able to use the find method to search for paragraph substitutions and format as these options are available in the Find dialog box. However, because of the excruciating Extendscript documentation from Adobe, I not was able to find the key pieces of information that I need. I found these constants:

  • Constants.FV_FindPgfFormatOverride
  • Constants.FV_FindCharacterFormatOverride

  But he has literally no information about them. It is not yet a definition, so I'm actually just a guess. However, I think that I need to somehow use these constant within the parameters of the Find method. Any ideas on how to do it?

  You're right, there are still some bugs to work out of the documentation, although it has already improved since I started w / Extendscript last summer.

  Find two constants must be defined as the ival for a PropVal FindObject, for example:

  var myDoc is app. ActiveDoc;

  var docStart = myDoc.MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;

  tloc var = new TextLoc(docStart,0);

  var findParams = AllocatePropVals (1);

  findParams [0].propIdent.num = Constants.FS_FindObject;

  findParams [0].propVal.valType = Constants.FT_Integer;

  findParams [0].propVal.ival = Constants.FV_FindCharacterFormatOverride;

  myDoc.Find (tloc, findParams);

  Depending on what you're trying to accomplish, you can also take a look at the property FormatOverride of the Doc, bmp and item objects.

• How to configure the virtual disk as SSD for the customer?

  Hi all:

  I have a virtual machine in an SSD, the guest operating system is Windows 8, but the guest OS, the virtual disk as 'hard drive '.

  Can I set the virtual disk as SSD for the guset? (Like VirtualBox)

  Thank you!

  Irake99 wrote: can I put the virtual disk as SSD for the guset? (Like VirtualBox)

  No, IDE or SCSI are your only choice.

• Cannot start. Don't get the error "no boot sector on hard drive internal.

  Original title: computer does not load.

  After that I turned on my laptop (windows XP) I get a black screen saying "no boot sector on hard drive internal" "no devices bootable-strike F1 to retry boot, F2 for installation; After pressing F1 displays the same screen and if I press F2 Setup screen appears and then I'm lost. Help please!

  Hi Jose_luna47,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?

  Method 1

  I suggest that you perform chkdsk analysis on the computer to check and fix the errors on the hard drive by using the recovery console.

  Chkdsk

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/chkdsk.mspx?mfr=true

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

  Description of the Windows XP Recovery Console for advanced users

  http://support.Microsoft.com/kb/314058

  Method 2

  If the previous step fails, then you will need to check the settings in the basic input/output system (BIOS) and you need to contact the computer manufacturer for help with basic input/output system (BIOS).

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• How to use the utility to update (uefi) BIOS HP

  Notebook: G62 a10em

  I downloaded the BIOS update tool from http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063 & lc = on & cc = us & dlc = in & sw_lang = & product = 4226...

  and it is installed on my USB key.

  Now, how can I update my bios?

  The USB key contains now:

  BIOS

  | - Current (empty folder)

  | - New (empty folder)

  | - Previous (empty folder)

  BIOSUpdate

  -CryptRSA.efi

  -CryptRSA32.efi

  -HpBiosUpdate.efi

  -HpBiosUpdate.s09

  -HpBiosUpdate.sig

  -HpBiosUpdate32.efi

  -HpBiosUpdate32.s09

  -HpBiosUpdate32.sig

  my current version of bios is f. 08

  I did a cut above.

  After looking at the appropriate file you downloaded, it says this:

  "Prerequisites .
  -Microsoft .NET 2.0 is required. UEFI and Custom Imaging - the HP BIOS update must be run from a FAT or FAT32, partition with a volume of the "HP_TOOLS" name This Installer gives you the option to install on the hard disk (HDD) or USB. If you install on the HARD disk and the HP_TOOLS partition is not present, Setup prompts to create the HP_TOOLS partition. If you install on a USB key, Setup renames the partition on the USB in HP_TOOLS. If you use a custom image, you can create the HP_TOOLS partition manually with the type FAT32 and that the volume HP_TOOLS name. ATTENTION:-the UEFI system partition is not protected and can be removed. -Backup of the computer by using the complete PC Backup feature of Microsoft Windows Vista does not save the UEFI system partition. For these reasons, HP recommends that you place no additional data on the UEFI system partition. Because the partition is not backed up, corruption or failure of the partition will result in the loss of all data on the partition, as well as the loss of UEFI functionality. "For more information, visit: www.hp.com/go/techcenter/startup"

  There is little documentation on how to use it, but a Member here figured it out.

  http://h30434.www3.HP.com/T5/operating-systems-and-software/envy-14-system-recovery-doesn-t-work-with-latest-BIOS/m-p/328684/highlight/false#M45165

  using Windows 7:

  Just plug in the USB key and then run the SPnnnnn.exe BIOS file downloaded from the Web site drivers HP.

  Assuming that the USB is configured correctly (see below), Setup the BIOS sees the HP_TOOLS partition on the USB, copy of the BIOS and its file signature on the USB key, then run Setup winflash. The system BIOS detects the USB and the partition HP_TOOLS and the BIOS is magically updated.

  I put in place a new USB key as follows:

  1 rename the partition HP_TOOLS from the hard drive to something different like HP_TOOLSbak

  2. Plug the USB

  3. Download and run the utility to update the BIOS (not the BIOS, still) drivers HP support page.

  4. Select the option to install to a USB

  5. Select the option to create the partition HP_TOOLS

  6. The reader should now be formatted as HP_TOOLS with a record of Hewlett-Packard containing BIOS and BIOSUpdate records. The BIOS folder contains empty current, news and previous records.

  7 download and run the HP System Diagnostics (UEFI) MS drivers HP support page

  8. Select the option to install on a USB key. This will create a SystemDiags folder under the Hewlett-Packard folder

  9. Download and run the HP Notebook System BIOS update for the HP support page drivers, given that the USB is correctly tagged it will install the update of the bios on the USB drive

  10, we have to end up with a HP_TOOLS partition on the USB drive identical to the one that you removed from the hard drive.

  Once you have configured the USB drive, you can upgrade to other versions of BIOS (most recent or oldest) using this drive, as I mentioned above: just plug in the USB and then download and run the BIOS Setup program.

  Having said that I'm not sure of what you do, once you boot the USB drive.

  .

• Utility disk first aid indicates that it is a wrong number of hard file links

  After various software update yesterday the Mac mini has had several problems. I ran disk utility first aid, and he says 'wrong number of hard file links.

  Which allows to fix this?

  The drive has been successful to repair by disk utility?

  You must boot from recovery to repair the startup disk

  OS X: on OS X Recovery - Apple Support

  What problems did you have?