600-1055: replacement fan

I have a HP Touchsmart 600-1055 NY539AA need to replace fans.  Where can I find these?  I looked online and can find a lot of fans, but none that appear to be a direct replacement.  Someone at - it a good source?  Thanks in advance!

Hello

Please bookmark the following link which shows all the parts available for your machine:

http://PartSurfer.HP.com/search.aspx?SearchText=NY539AA

Looks like you need a fan (part number 537510-001). You can buy from the link above (check the square to the left of the part number). Not available on Amazon now:

https://www.Amazon.ca/HP-537510-001-blower-M5/DP/B0085J39RE

https://www.Amazon.es/sparepart-HP-blower-M5-537510-001/DP/B0085J39RE

Kind regards.

Tags: HP Desktops

Similar Questions

  • TouchSmart 600-1055-Message of disk error hard hd521-2w

    I have a Touchsmart 600-1055 is our guarantee. I am running Windows 7 (64-bit). I have hard to start when the computer hangs at the Windows screen. I was able to carry out repairs and after many attempts it finally began. I ran the test of the system and the only test that failed was for my Smart hard drive test and gave the code of hd521-2w. I guess that means that the HD is about to go. Am I wrong? And if yes, what is the replacement and can I upgrade to 2 TB and when and where can I find instructions on how t it? Thank you!

    Hello:

    Yes you are right. The hard drive has virtually disappeared.  Back up your files.

    I would go no larger than a 1 TB HARD drive.  2 TB might work, but it might not.

    SATA II 7 200 RPM desktop drive, that's what you need to replace with.

    Here is the link to the guide of upgrade and maintenance.

    http://h10032.www1.HP.com/CTG/manual/c01895538.PDF

    You will also need a set of discs of recovery to reinstall the operating system and the programs that came with thePC.

    Paul

  • Need advice. Would you sink (at least) $600 to replace the screen on a MacBook Pro 13 inch retina end 2012 or you want to buy a new one?

    Need advice. Would you sink (at least) $600 to replace the screen on a MacBook Pro 13 inch retina end 2012 or you want to buy a new one?

    You can buy a worn integers for that.

    Only if your machine is Virgin and you want only one specific

  • replacement fan - should I discrete or UMA memory?

    Hello

     

    I have a laptop HP Pavilion dv7-6c80us I need to replace the cooling fan on.

    Intel HD Graphics 3000

    Intel HM65

    Intel core i7 2670QM

    To order a replacement fan, I need to know if I have:

    a graphic with subsystem
    2048 MB memory discreet
    (Exhibit #666391-001)

    a graphic with subsystem
    1024 MB memory discreet
    (Exhibit #666390-001)

    a graphic with subsystem
    Memory of the AMU
    (Exhibit #666392-001)

    How can I find this information?

    Thank you.

    If there only the graphics card Intel HD 3000, it is UMA.

    The specifications confirm that this is the case:

    http://support.HP.com/us-en/document/c03138569

  • HP ENVY dv7t-7300 CTO Quad Edi: what part of replacement fan that I get for my laptop? Memory discrete or UMA?

    Hello, I have problems finding the right replacement for my hp laptop part. I have a laptop that needs to have his replaced fan/radiator. The laptop is the HP ENVY laptop dv7t-7300 CTO Quad Edition. I went online and find the service manual for the computer to find the spare part. There was a list of spare parts for the different variants of models.

    The results of narrowed it down in 2 results for spare parts. A fan/radiator was for a graphics subsystem with discrete memory and the other fan/radiator for a graphics system with memory UMA. I don't know which one is for my computer, could you please help clarify? The part 682061-001 or 682060-001 part?

    Model No.: dv7t-7300

    Product #: C2Y65AV

    [Personal information]

    Hello

    No, I'm talking about Device Manager. Hope that the sticker is good then your machine's discreet graphics because:

    • The UMA version applies to the motherboard that does not have a separate dedicated graphics chip. On this version, the graphics processing is managed by the North bridge chipset.
    • The discreet version applies to the motherboard with a separate chip to achieve all the graphics processors.

    Based on the sticker, your machine has NVIDIA GEFORCE GT M 635

    Kind regards.

  • AIO 600-1055: Win10 did not work & MS could not make it work. Reinstalled Win7 & now the DVD is not recognized

    Have HP AIO 600-1055 Desktop. "Upgraded" to Win10. Didn't work & MS could not make it work. Reinstalled Win7 and now DVD is not recognized

    Hello:

    See run the resolutions listed in the link below the job for you.

    https://support.Microsoft.com/en-us/KB/314060

    #3 or #5 usually work.

  • Win 8 on Touchsmart 600-1055?

    My Touchsmart 600-1055 (exactly 3 years from dec / 2013) has experienced a hard drive failure. I bought a new hard drive but have no restore disc and HP don't use them more for this model.

    So: Did anyone see a problem with the installation of Windows 8 on this old system? I understand that it may not work because of drivers... but that's it or throw the PC, which is always a great PC for some uses.

    I appreciate the answers.

    Hello

    Windows 7 is still the best at this stage, but if you want to switch to Windows 8, it's your choice and you will need to find one or two drivers for your computer. A lot of friends in this forum will help you.

    Kind regards.

  • T60 - thermal grease replacement fan

    My T60 fan started whining then IBM sent me a replacement fan and a tube of thermal grease - but the fan already has the thermal grease on it.

    Fat is actually a matrix of 5 x 7 of 35 points of thermal grease. Everything I've ever read on the application of thermal paste says that it should be applied in a very thin layer, smooth and these thermal grease points seem quite in line with that.

    1 should I flatten points and spread them thinly? Or IBM expects we just install what it is - maybe the pressure during the installation is supposed to flatten out the appropriate grease?

    2 should I create some handy pure alcohol to remove all the old grease before replacing the fan?

    Hello

    1. the points will become flat and a thin layer under pressure and when it is applied.

    2. Yes, clean the old grease.

    3. watch any contact part´s get´s fat.

    Like your old radiator, it takes grease on the new.

    Concerning

    Andreas

  • 600-1050 replacement hard drive

    I have a 600-1050 Touchsmart and replace the hard drive with a larger capacity.

    I saw messages for other models imply that the max that they support 1 TB, but found no specific to the Touchsmart 600-1050 post

    What is the largest hard drive controller drive support?

    Can't find any update of the BIOS on the support site.

    (planning on installing fresh Windows 8.1)

    Thank you

    You should have no problem with hard drives up to 2 TB... Readers from over 2.2 to be unusable by your computer.

    If you have any other questions, feel free to ask.

    Please click the White Star of KUDOS to show your appreciation

  • Can I replace fan CPU Vista cruise?

    I need to know if it is possible to build a C++ program that replaces Windows Vista Ultimate control fan speed, so I need to maximize the voltage or rpm my CPU Fan.

    Thank you!

    Question may be stupid, but why you want to change something? Settings and features are powered by Microsoft and also tested and adapted by Toshiba.
    What is the problem?

    Out of curiosity, what Toshiba laptop do you have?

  • Re: Replacing fan on Satellite Z930

    Hello world

    because my Z830 is more an A360 the last days as a quiet ultrabook I wanted to address the annoying loud fan subjekt again...

    Iluminatus23 mentioned in [another thread | http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=271287#271287] he uses now new Z930 fan in his Z830 with good results (silence!).
    On the internet, I wasn't able to find a seller for this fan in Germany. Is anyone of you know where I can get this fabulous new fan? Can it even be (free?) replaced by Toshiba? (guaranteed & mobile)

    Perhaps Iluminatus23 could give us a little more information about the replacement (where he got his fan of / if the replacement is easy / if he's happy, or maybe the problems occurred afterwards)?

    Thank you for your time and hope to have some answers :)

    Just before doing anything on your own try to contact Toshiba in Germany service provider and ask if they can help with this.
    It is a machine very expensive so don't do anything on your own.

  • Pavilion fan questions after replacing fans.

    I have a 4 years, HP Pavilion Elite m9500y equipped of Windows Vista. I had received messages from 'system fan failure' on startup from time to time and had heard loud grinding noises still occasionally. I changed the power supply and a video card, and none has solved the problem. Lately, computer work really slowly and the CPU temperature was more than 100 degrees Celsius only at startup.

    I replaced the cpu fan and case fan today and have encountered a new problem - when I hit the power button, the computer starts up, I see both fans run for about 10 seconds, and then they stop. The CPU fan first, then the case fan. Then, I get an error message saying the CPU fan has failed and the computer turns off. It is possible that I installed the fans back. Does anyone know the correct orientation or have pictures? Anything else may have caused the problems?

    skidlz,

    54sec at 01:17 minutes this video shows the CPU fan and the orientation of the blade. In regards to the rear case fan, fan shroud has an arrow showing the flow. The fan is a fan, so he blows on the back.

  • Equium A100-147: replaced Fan part number

    Hello

    I have an Equium A100 147 which is now out of warranty.
    I need to be able to find and of course spare part number where I can buy one of these ASAP.

    If someone could help me with this, it would be quite apprieciated.

    Thank you

    You can not ONLY buy the fan. The fan is a part of the cooling module and the entire module cooling must be replaced.

    You need a cooling module that has been designed especially for this series of laptop and I know ASP (certified partner) in your country should be able to help.

    I think guys should be able to order this part compatible directly from the warehouse of Toshiba.

    Then call the guy and ask for help!

  • Pavilion G6: Replace fan on Pavilion

    I realize this is probably a general 'fault' with most laptops, but why the hell don't manufacturers build their machines with fans that are accessible, like all hard drives seem to be. Moving parts are obviously more likely to wear or fail over time and, as far as I can see, there are two types in a laptop, the HARD drive and fan.
    Replace a HARD drive can be done in an hour or two (eg. On a G6 Pavilion, it requires the removal of two screws and careful replacement) but to replace a cooling fan, we're looking for a good ten or twelve hours (eg. On a G6 Pavilion on the only part that doesn't have to be physically removed and put in the back is the screen, I lost count of the number of screws).
    With repair shops charge as much as £80 per hour that it's cheaper to buy a new machine that pay for a piece of a £20 replaced. I suspect that there is a general scheme by all manufacturers to ensure that their customers replace their machines after expiration of the warranty, rather that attempt to repair a machine that works perfectly but needs only a 4oz part replaced for another couple of use of it.

    Thought so, just be a bit lazy, I guess.
    Want to do things (and do it myself), some pride self creeping in.
    Thanks for your comments.

  • Satellite A300D - overheating after replace fan

    Hello
    I just replaced the fan on my girlfriend A300D as on the old fan bearings were going and making it very loud and he had just gone out of warranty.

    However, the computer keeps overheating with this new fan.
    Everything is clean and the fan works and move the heat out, however the area around the touchpad becomes very hot and laptop computer often overheats and stops automatically.

    Any advice on what could be the problem and what can be done to remedy this?

    Kind regards
    David

    Hi David!

    Which fan did you use to replace? Is it the same as the old fan? Here you can compare part numbers, I guess the new fan is another.

    Well, it's hard to say why the laptop is overheating if everything is clean. Have you cleaned using compressed air stream?

    I think that in this case you need professional assistance of a technician for laptop. You can contact an ASP to get help:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

Maybe you are looking for

  • scheduled task shutdown.exe still running after disabling SERVER 2008 R2

    Hello A scheduled task still running after people with disabilities (shutdown.exe/s) on my network. We have disabled the task in the Task Manager. and updated computers with gpupdate/force. However, it stops again. How can I make this stop?

  • Game crashing

    I have windows Vista Home Basic. The game im having a problem with bet on soldier. Its compatiable with vista so ive been told windows 2000, windows xp. The game runs for about 5-10 min. Then it just stop and I get the little box saying that there is

  • Event ID: 3058; Event source: Windows Search Service; File name: tquery.dll.mui

    Hi all Event - Application log viewer. Error Windows operating system; Version: 7.0.6001.16503; Event ID: 3058; Event source: Windows Search Service; File name: tquery.dll.mui Cannot initialize the Gatherer object Context; Windows Application creates

  • PRI Master Hard disk S.M.A.R.T Status Bad

    I have a Hp mini 110 net book with a windows xp what OS and I cannot start at the login window. It displays a blue screen for 1 second and it restarts. Now, it says disk error and it won't pass this point. I tried to do a primary disk hard test but i

  • Backlight?

    When I got this a few days ago (fuze 2 GB), it was the correct brightness, then reduce to a darker setting after 15-20 sec or so.  Now he's the dark, black every time I do anything... If I use any button, it becomes black.  It's like the backlight is