How to use the control ring before the G15

Similar Questions

• EGAD! Learn how to use the G15

  EGAD!

  This computer is anything but a Secretary!

  Love it, but can't understand exactly what to do. The e-manual does not cover everything.

  My big question is in the tv tuner. It will only work if I have a coaxial cable? Is there a built in antenna or some device I can buy to tune local channels (I'm in the USA)?

  Hello

  I'm sure that you need an antenna for local channels too. Am I wrong? Or there is some other way of looking at these programs? Do you need a decoder for the local television programming?

  I no a lot of experience, but the best way to send the TV signal in laptop is using the coaxial antenna to the port.

  On the back side of your G15 also there S-video port. This port, you can use for the insertion of signal for your laptop.

• Manual or how to use the ExpressCard Remote control Mobile HP Media Center

  My HP Pavilion dv7-1448dx-product # NV213UA #ABA.
  I'm running Win 7 Ultimate x 64 OEM.

  I searched HP and found 1 photo of my card ExpressCard Mobile HP Media Center remote control, I found all the descriptions of component and everything BUT how to use it?

  Where can I get information on how to use the "card ExpressCard Remote control Mobile HP Media Center"?

  Deborah M souls.

  Deborah M souls

  Hello

  Are you talking about the next device? How to install and how to use information is here:

  Express Card Media Center

  Kind regards.

• How to use the selection tool to resize a text box? Before I was able to click on the text box with the selection too in order to resize, but now I click on it and it only gives me 'path' or 'anchor' options.

  How to use the selection tool to resize a text box? Before I was able to click on the text box with the selection too in order to resize, but now I click on it and it only gives me 'path' or 'anchor' options.

  Ashley,

  What about window > show the rectangle enclosing (Ctrl / Cmd + Shift + B to toggle)?

• How to use the OEM grid control to find databases, not in archivelog mode?

  Hello
  
  We have currently 130 databases, say, if I want to come off as any database currently NOT in archivelog mode, is there a quick way to find out?
  
  using the OEM grid control
  
  or
  
  a similar trick,
  
  but really do not need to manually check each database.
  
  Thank you very much!

  This query works in 12 c - please run as SYSMAN.
  It is based on undocumented assumptions well + (AND key_value = "NOARCHIVELOG") +.

    SELECT *
    FROM SYSMAN.MGMT$GROUP_DERIVED_MEMBERSHIPS O ,
      SYSMAN.MGMT$TARGET T ,
      sysman.MGMT$AVAILABILITY_CURRENT st
    WHERE
    o.member_target_type     IN ('oracle_database', 'rac_database')
    AND ( t.target_type           ='rac_database'
    OR (t.target_type             ='oracle_database'
    AND t.type_qualifier3        != 'RACINST'))
    AND o. member_target_guid     = t.target_guid
    AND t.target_guid             = st.target_guid
    AND st.availability_status    = 'Target Up'
    AND ( EXISTS
      (SELECT *
      FROM sysman.mgmt$metric_current i
      WHERE I.TARGET_GUID = O.MEMBER_TARGET_GUID
      AND metric_name     = 'archFull'
      AND Metric_Column   = 'archTotal'
      AND metric_label    = 'Archive Area'
      AND column_label    = 'Total Archive Area (KB)'
      AND key_value       = 'NOARCHIVELOG'
      ));
  

  Another way to achieve the goal is to push the extended parameters (SELECT LOG_MODE FROM V$ DATABASE) on each DB and monitor the values they return to the repository. This is an example for a (slightly) different problem - http://iiotzov.wordpress.com/2012/08/08/how-to-use-the-new-oem-12c-metric-extensions-to-enforce-enterprise-wide-custom-policies.

  OEM repository has many other uses grand-http://iiotzov.files.wordpress.com/2012/05/oem-repository-a-second-look.doc, http://iiotzov.files.wordpress.com/2011/08/iotzov_oem_repository.pdf

  Lordane Iotzov
  http://iiotzov.WordPress.com/

• With no headphone jack, how to use the iPhone in my car 7

  Okay, so here's the challenge.  I have a power source and a headphone and not Bluetooth.  It works perfectly with iPhones before 7.  But with 7, it isn't possible to use the same configuration I had for years.  I own my car, and I have no interest in buying a new car just to support a new phone.  And since this will be a problem for the years to come if I stay with Apple, I would like to know what are the solutions are available.

  So, how to use the new iPhone 7 while remaining responsible and using my car speakers?  Dongles Bluetooth that I need to reload, it's probably not.

  Thus, looking for ideas that might have people.  I can't be the only one with this concern.

  It's almost a certainty that a third party adapter will appear quickly. The new Macbook has a single port usb - c and people asked the same question, 'how to load and use USB at the same time." There are today dozens of solutions for the Macbook, and then it will be with the iPhone 7. An adapter with a 3.5 mm jack and a port of loading Lightening would be my guess. Kickstarter entrepreneurs are probably already working on it.

• How to use the capture and the print button

  I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?

  Thank you

  Andi Starbuck

  That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?

• SOLUTION - How to use the remote on the Satellite X 200 with Win7 64 bit

  Here is the description how to use the remote control on the Satellite X 200-2 b with Windows 7 64 bit.

  Thanks for the link.

  It will be fine if some owner of Satellite X 200 can confirm.

• How to use the recovery CD?

  Hello

  Ive lost the instructions to tell me how to use the recovery CD. I forgot, I need to press to access the disks when I reboot!

  Can anyone help please?
  St. Clare

  Hi clear, before using the recovery CD make you that all important data has been saved to the floppy or USB key because the procedure will erase the entire hard drive. The method for booting from a cΘdΘrom may vary according to the model number of your laptop, but it's something like hold the 'B' button for the Toshiba Startup logo. If this fails you can try to change the boot sequence or use the Toshiba from Windows or the BIOS configuration tool (ESC then F1 when prompted from a cold start) make CD-ROM the first device startup in the list.

  Richard S.

• How to use the Qosmio F50 Quad core HD processor in other software

  I would like learn how to use the image processor in other programs in addition to Toshiba Upconvert, transcoding, face Navigation and gesture of the functionality of the control. Someone has an idea? Thank you!

  I doubt that there are software available because the Cell processor is only a hand full of PC.

  If you have applications for creation of media professionals, you can get the plug-in to activate the cell processing.

• Re: How to use the recovery on Satellite A60 cd

  Hello, I want to give my a60 to its factory settings. I found my recovery cd but I lost the instruction booklet on how to use the dam thing! I did it before, but for the life of me I don't remember.

  can anyone help?

  Many thanks, Jun

  Hello

  This forum is a large database and provides discussions much useful and views.

  Search you and read a few discussions?

• How to use the scanner as a scroll

  Hello

  I have lenovo e40-70, how to use the scanner as a scroll wheel?

  This issue has developed before and unfortunately the software Lenovo does not support.

• How to use the greenscreen on Imovie 10.1 effect?

  I have no idea how to activate Advanced tools for this version of iMovie, there is nothing in the preferences, how I use the greenscreen / any other adnaced tool such as the image within an image etc.

  I'm on OS X YOSEMITE 10.10.5

  Hello!

  I have finally (!) has found a way to do it!

  You must drag and drop the element above the other, not ON it (like I usually did before). Then the invisible square symbol in the setting bar appears, which allows to choose between the van greenscreen etc.

• How to use the automatic configuration wizard and where can I FIND?

  How to use the automatic configuration wizard and where can I FIND?

  Hi TannySmedt,

  To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel. If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools. If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic. This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the automatic Wireless Configuration service zero wireless and click on the OK button.

  The automatic Wireless Configuration can also be started and stopped from a command prompt. To start the automatic Wireless Configuration, run the following command:

  net start wzcsvc

  To stop the automatic Wireless Configuration, run the following command:

  net stop wzcsvc

• How to use the Go buyback program?

  There is a program that restores your computer exactly what he had on it a while ago. I've used it before, but I don't remember how I got him. Can someone tell me the name of the program if it has changed, or how to access it?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  What is system restore?

  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  A very good tutorial on how to use the system restore is at the link above.

  Restore point:

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner