How to use the field, like an EmailValidator validators, in a Flash Catalyst project?

Similar Questions

• How to use the Facebook like widget that comes with the muse?

  I can't for the life of make me it work! What url should we use?

  Hi Chris

  This should work, I need the exact code you use in the page.

  Please pm me.

  I also tried to use the generated code that works on my end, have created a short video for your reference, you can download it here:

  https://www.dropbox.com/s/zztkx28emakau4k/FB.swf

  Thank you

  Sanjit

• After using popScreen() than pushScreen(), how to remove the fields present in this first screen.

  I have two screens, first_one contains 17 fields & by a button_presnt in the first screen, I'm reaching to the second screen, on the second screen after pop_screen (first) & push_screen (first) I get my first screen, now I want to remove 15 fields, but I face the error, this illegal argument exception, or "Try to delete a field that is not the Manager"... & Note this point I got the get_field_count from the first screen.
  Try

  {

  UiApplication.getUiApplication () .popScreen (object_to_supprot);
  UiApplication.getUiApplication () .pushScreen (object_to_supprot);
  }
  catch (Exception err)
  {
  Dialog.Inform ("page load error:" + err);
  }

  Try
  {
  Dialog.Inform ("field homepage County:"+ object_to_supprot.getFieldCount () ');

  int k = object_to_supprot.getFieldCount () - 1;

  While (k > 1)
  {
  Delete (object_to_supprot.getField (k));
  k-- ;
  }
  }
  catch (Exception err)

  {

  Dialog.Inform ("error in the setting of the key work:" + err);

  }

  I disagree with Simon here.  I think that the deletion of fields of a screen is a valid thing to do.  I can see the case when you are using the same screen, but have two different sets of data that require slightly different fields on the screen.  This is what seems to be the case here.

  I just realized what is the problem.

  your code:

  Delete (object_to_supprot.getField (k));

  must be:

  object_to_supprot. Delete (object_to_supprot.getField (k));

  Your current code is actually:

  This.Delete (object_to_supprot.getField (k));

  and 'this' is probably your second screen.  You want to remove fields from your first screen.

  Can I ask you to review my first post and Simon post, once again.  If please review how to use the battery in the display and make sure that you use it properly.

• How to validate the field "Reason for change" in the commercial indications using JavaScript?

  How to validate the field "reason for change" in the commercial directions Summary tab using JavaScript?

  Current version of PLM4P: v6.1.1.5.2

  Please help me to validate the fields using JavaScript.

  Thank you

  Nefertari

  Developed using some of the Javascript predefined functions that we offer, it's just JavaScript and jQuery.

  But here is an example.

  (Use Internet Explorer F12 developer tools to find the IDS of the fields to work with.)

  $(document).ready(function() { 
  
      if (UI_Ext_isSpecInEditMode && UI_Ext_HasWorkflowBehavior('1005'))
      {
         //normally, we can use jquery to retrieve elements ($('#ifOfInput).val()), but it seems to fail when the id and the name attributes are the same. so we just use javascript document.getElementById instead.
         var reasonForChange = document.getElementById('ctl01$SpecSummaryctl1$ctlCollapsibleContentContainer$ctl00$txtChangeReason')
  
         if (reasonForChange != null) { 
  
              if (reasonForChange.value == null || reasonForChange.value.length == 0) {
                   UI_Ext_MarkFieldAsRequired('ctl01_SpecSummaryctl1_ctlCollapsibleContentContainer_ctl00_lblSpecSummaryReasonforChange');
                   alert('Reason For Change is required');
              }
         }
      }
  }); 
  

  However, not the user registration or workflow specification. If you were to do this, you must remove record them and workflow buttons and links, and this probably isn't the best practice. On the contrary, you would write validation server that would give you this error message if they try to save/workflow. (So most customers do not use Extensions of the user interface for this type of validation).

  Kind regards

  Ron

• How to prevent the fields of signature on my IPAD Adobe Reader 11 endangered endangered

  Hi, I use Adobe Acrobat XI pro trial version. I converted a Word document to PDF format. I added text fields, scripts to add Java automatically today's date as default, the form RESET button and Signature fields. File is saved as a standard backup. All this is done in the Windows 7 environment. On the same computer, the signing in Adobe Reader fields are visible even if I don't have the means to test. When the same file is sent by electronic mail and opened on an IPAD using Adobe Reader 11.2, signature fields are missing. I intend to have my users access the file (and 30 other same) on an IPAD. Can someone advise how to resolve the problem of missing signature field. It seems that Adobe do not help with these questions, because it is not considered to be an installation problem.

  Digital signatures do not rely on mobile versions of Adobe Reader. Other viewers PDF as Expert PDF of Readdle treat like fields of electronic signature, allowing the user to draw/apply their signature designed, but is not the same as a digital signature. Adobe Reader for iOS allows you to add an electronic signature, but it does not use the fields of digital signature for this feature. Instead, you tap the screen, choose the icon annotations, and then click the signature icon.

• How to set the field "default" of a quick dashboard to yesterday?

  Hello world
  
  I have a dashboard the guest on a date (full name Date.Date and type Date).
  I also have a simple report with two columns: Date.Date and a measure (whatever the name).
  
  I've managed to filter the day before the current date in the report by adding an advanced SQL filter:
  Date.Date = Cast (TimestampAdd(SQL_TSI_DAY,-1,@{system.currentTime}) as Date)
  
  Now, I would like to invite him to select the day before the current date by default.
  The filter on Date.Date would be "invited" or more.
  
  How to set the field "Default" from the command prompt?
  
  Thanks in advance

  Hello

  go to the command prompt...
  Select SQL results of as default: drop-down list.
  here... you have to write your SQL logic...
  who uses by default the previous date
  something like that...

  * Select case when 1 = 0 then anydate column of another timestampadd (sql_tsi_day-1, CURRENT_DATE) of the end SubjectArea name*.

  write like this... and report back...

  Thank you & best regards
  Kishore Guggilla

• With no headphone jack, how to use the iPhone in my car 7

  Okay, so here's the challenge.  I have a power source and a headphone and not Bluetooth.  It works perfectly with iPhones before 7.  But with 7, it isn't possible to use the same configuration I had for years.  I own my car, and I have no interest in buying a new car just to support a new phone.  And since this will be a problem for the years to come if I stay with Apple, I would like to know what are the solutions are available.

  So, how to use the new iPhone 7 while remaining responsible and using my car speakers?  Dongles Bluetooth that I need to reload, it's probably not.

  Thus, looking for ideas that might have people.  I can't be the only one with this concern.

  It's almost a certainty that a third party adapter will appear quickly. The new Macbook has a single port usb - c and people asked the same question, 'how to load and use USB at the same time." There are today dozens of solutions for the Macbook, and then it will be with the iPhone 7. An adapter with a 3.5 mm jack and a port of loading Lightening would be my guess. Kickstarter entrepreneurs are probably already working on it.

• How to use the software keyboard Toshiba 50L9450VE TV?

  I just bought a LED TV model 50L9450VE. When installing, I need to enter the password for the wifi network. The remote doesn't have a keyboard of the letter, and the TV shows a soft keyboard to enter the password. How to use the software keyboard? I can't figure out how to get the cursor in it; the manual does not say, and I can't find the information online. Thank you.

  Hershel

  Suppose you are from Israel? Although this model is not made for the EU market, but probably for the Asian market, it looks like the European L93 series.
  You will find how to operate the software keyboard (page 52): http://www.toshiba-om.net/pdf/manual...h-Specific.pdf

• How to use the recovery CD?

  Hello

  Ive lost the instructions to tell me how to use the recovery CD. I forgot, I need to press to access the disks when I reboot!

  Can anyone help please?
  St. Clare

  Hi clear, before using the recovery CD make you that all important data has been saved to the floppy or USB key because the procedure will erase the entire hard drive. The method for booting from a cΘdΘrom may vary according to the model number of your laptop, but it's something like hold the 'B' button for the Toshiba Startup logo. If this fails you can try to change the boot sequence or use the Toshiba from Windows or the BIOS configuration tool (ESC then F1 when prompted from a cold start) make CD-ROM the first device startup in the list.

  Richard S.

• How to use the tuner DVB - T in Qosmioplayer?

  Hello

  Can someone tell me how to use the tuner DVB - T in Qosmioplayer? It is very much in the media library, but on starting the Qosmioplayer I just get snow like the old analog TV. I can go to my sky box via composite inputs, but want to use TNT an antenna in the drive.

  Hello

  As far as I know the Qosmio player is not able to receive the digital channels.
  Unfortunately, it is not possible.

• How to use the utility of recognition of face on Satellite L350D

  Hi all

  I am trying to understand how to use the utility on my laptop satellite L350D-131 face recognition but won't have any look.

  Can someone tell me how to use / start this feature please?

  It should come a manual or a tutorial how to use this tool. I'm not an expert in the field, because I saw this feature only on a laptop in the stores. But it is a security feature nice little addition to the fingerprint system.

• How to use the Qosmio F50 Quad core HD processor in other software

  I would like learn how to use the image processor in other programs in addition to Toshiba Upconvert, transcoding, face Navigation and gesture of the functionality of the control. Someone has an idea? Thank you!

  I doubt that there are software available because the Cell processor is only a hand full of PC.

  If you have applications for creation of media professionals, you can get the plug-in to activate the cell processing.

• How to use the greenscreen on Imovie 10.1 effect?

  I have no idea how to activate Advanced tools for this version of iMovie, there is nothing in the preferences, how I use the greenscreen / any other adnaced tool such as the image within an image etc.

  I'm on OS X YOSEMITE 10.10.5

  Hello!

  I have finally (!) has found a way to do it!

  You must drag and drop the element above the other, not ON it (like I usually did before). Then the invisible square symbol in the setting bar appears, which allows to choose between the van greenscreen etc.

• Liquid Z 3 How to use the small screen-receving-phone-call?

  Hello

  I would like to know how to use the small screen that appear in a case to receive a phone call.

  There are two types of screen wen we receive a phone call. I know how to use a larger. But not for the little ones. Aid for the small indicates that we have to drag the green phone symbol that I guess, but to fall on what? The manual doesn't explain it at all, it is not obvious!

  Thank you very much for your help!

  With "appellant float" activated, simply to press the Red or green button, no need to call, if the "small screen" is that of the attachment

• Is there an online class to learn exactly how to use the command prompt which is quite through. OR y at - it clear a book that explains in detail for this? Who should I contact?

  I would like to know how to use the command prompt.  The nethodology type in the cmd prompt with the syntax and the Liposuction, in other words, the real return to a command prompt. I downloaded about evertthing I can find about this, but can't seem to put it all.

  My OS is Windows XP Pro sp3, lots of RAM, my address is * address email is removed from the privacy *.   I would like to take a rough online study if one is available if it is not too expensive.

  It really depends on what you mean by "to a command prompt."

  If you open a command prompt window (for example, in start > run > cmd > OK), you can enter a number of orders.  The list of available commands, including their syntax, is here--> http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/ntcmds.mspx?mfr=true

  You can also follow the links here:http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/ntcmds_o.mspx

  If you want to get more sophisticated - automating command-line tasks - you can start here: http://technet.microsoft.com/en-us/scriptcenter/default.aspx