How to use the railways imported from Photoshop/Illustrator as guides of movement
Hi people,
I was raking the internet unsuccessfully for an answer to my question, but I had no luck so far.
I hope realize animation wise is to have a form to move a path together created in Photoshop. The reason is, it is a very specific form (close enough a square but with curved corners and a piece missing on one side), and I used the path feature in Photoshop to create and the path for the smoothest possible effect of race. What I would ideally like to, it's the same way I used to create the shape in Flash Professional CS6 and then use this same path to guide a small symbol on the perimeter of the place of import.
So far, I worked on how to apply the movement to a symbol through interpolations of base, then I can draw a line with the pencil tool and which apply to the interpolation it follow the trace in pencil instead of just get from point A to point B. The problem is, it's horrible... I'm not good enough with a mouse to create absolutely perfect freehand shapes, so I just want to be able to use the path of Photoshop as my guide of movement instead of having to make a new one from scratch.
I looked around many import methods, the greatest success I have had is export paths to Illustrator file, and then import the Illustrator file into Flash directly. However, I have NO idea where these paths to go when they are imported, or how to access. If I import them to the scene, they apparently disappear before I've even seen them, and if I import them into the library that they just aren't there.
I could also make a brief description of the operation of railways in Flash - me are familiar with the presentation of Photoshop, what with the paths that appear in a panel beside the layers one (perfect me seems logical, because you can simply switch between the two panels to see what you want). I do not understand how they work in Flash and what should I look for...
Thank you very much in advance for any help!
Todd
I just did a quick test to see what the problem might be. It seems that import a schema from Photoshop into Flash converted to a movieClip. If I have to break the movieClip I just get a fill without line. Unfortunately, this fill will not work as a guide. I could use the tool in Flash pen and draw a new line in a new layer, but that's what you try to avoid having to do.
If I take a path in a Photoshop file saved in Illustrator, I can fondle then the path and then save as .ai file. So I can import into Flash. This any path is recognized as an online Flash and will work as a path. You may need to do a cleaning of the line. My quick example were too many points inside.
The guide should be done in one line item in Flash. A movieClip cannot be a pathname. Most often, the path is taken directly from the State with the pencil tool.
Tags: Adobe Animate
Similar Questions
-
How to use the license acquired from Win 7 cd to be used on my WinXP?
Windows XP License Activation
I have a copy of Windows XP on my PC where I tried registering online, he says that's not authentic. I bought a copy of Win7 with downgrade rights to Windows XP Pro. How to use the license acquired from Win 7 cd to be used on my WinXP? I could not afford a complete reinstallation because several drivers needed to work on my pc do not work with Win7.Thank you!Hello Emerson_1
Microsoft does not sell Windows 7 with a downgrade to Windows XP and a valid key. You will need to provide your own key. This option is only available with OEM Windows 7 Professional systems. If you wish to continue using XP you will need 2 keys as indicated by JW.Windows 7 offers XP mode and you can use it if you have chosen. -
How to use the command import on the production environment?
Hi gurus of the OFA.
I want to know about the production environment OAF and development environment, the differences between them and how to use the command import on the production environment?
Concerning
Ajay Sharma
-
How to use the path generated by a star to guide the robot to move?
I now know how to use a star planning on Voronoi path and I can run this program successfully. \
However, my problem now is how I can use the path data (generated by the planning algorithm * path) to guide the robot rolling along this path? Well, I guess I can get a set of points (denoted by x and there contact information) of the path and use those points to guide the robot?
can someone please help?
Thank you very much
You must only post the question once.
-
How to use the median filter?
I need a median filter that ignores the pixels with color difference above a certain threshold. So, if the pixels are relatively narrow in the value of the color, apply median as usual. If not, ignore.
Hi bluefalcon,.
Please check the following link and let me know if you be useful: How to use the median filter in Photoshop CS6 - for Dummies
Concerning
Tanuj
-
How to use the adapter from the wall with my Mac Pro laptop?
How to use the adapter from the wall with my Mac Pro laptop?
The AC wall connector is not compatible with the outlet on the MBP? As the MBP charger will work from 100v to 240v, a transformer is necessary. You need a converter that connects to the power outlet home and is compatible with your MBP. You can buy the Apple travel kit:
http://www.Apple.com/shop/product/MD837AM/A/Apple-world-travel-adapter-Kit
Or you can use a single specific converter for the geographical area:
(it is a UK USA example)
Or you can get the converter that adapts the charger directly:
(again, this is for a UK plug.)
Ciao.
-
How to remove all the pictures imported from my I phone 6
How to remove all the pictures imported from my I phone 6
Imported from the place where?
If they were imported from your computer, you remove the same way that you put on there: by syncing with iTunes. to remove them, you need to synchronize an empty folder, or simply turn off the Photo in the form of synchronization option summary pane when the iPhone is connected.
-
I have a purchased copy of PhotoShop Elements 9. When I run it now I get an error message - error: 213:19. What does that mean? How to use the software I paid? Thanks a lot for your help!
See here:
-
How to use the old filter 8bf in photoshop cc2015
How to use the old filter 8bf in photoshop cc2015
Your 8bf filter should show in the menu filter. I'm guessing that's not show. Do you know who built it? I would try to communicate with the creator. If it was you, show us your resource PiPL and what you're trying to run it on and/or errors in the platform you get try to use it.
-
I re install my cs4 on a new computer and I'm short on 4-digit serial number I checked using the tab information on photoshop from my old computer? Help, please
Hello
Please check the help below document:
Quickly find your serial number
In the case of the volume license product, please visit: site Web of Adobe License | Serial numbers | Orders | Accounts
Kind regards
Sheena
-
How do I use the Windows Version of Photoshop CS 6-Mac Version
I use the Windows Version of Photoshop CS 6. Now, I have a Mac PC and I would like to change the Version of Windows to Mac. How I can do.
Exchange a product for a different version of the language or platform
-
How to transfer the license key from Windows to Mac for adobe photoshop lightroom 5?
How to transfer the license key from Windows to Mac for adobe photoshop lightroom 5?
You can download it from this link and post with your serial number. You can run LR5 on both machines.
http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5856
-
How to use refcursor type returned from the remote database in the local database
Can anyone say is how they use the refcursor use type returned from remote database in the local database using dblinks.See MOS ID 750126.1 doc ORA-24338 when trying to return a Refcursor over a database link.
-
How to use the copy utility for app from one server to another
Hello
I use hyperion 9.3.1 and I want to synchronize two applications on different server, I know how to use the utility to copy of app, but on the same server, I think that we can also use this utility to copy the application from one server to another using the properties file but I dnt know how to do it because the example is SQL and I am using and database oracle
can you guys please help.
Published by: sharad sapra on March 31, 2011 11:33Hello
1. create a property file (this example is relevant if you have a repository of ORACLE, you can find more information in http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_hp_admin/frameset.htm?ch09s01s01.html]):
SOURCE_APP_JDBC_CATALOG = SOURCE_APP
SOURCE_APP_JDBC_DRIVER = Hyperion.JDBC.Oracle.OracleDriver
SOURCE_APP_JDBC_URL = jdbc:hyperion:oracle://RepositoryDatabaseServer; SID = DatabaseSID
SOURCE_APP_JDBC_USERNAME = schemaName
SOURCE_APP_JDBC_PASSWORD = schemaPassword
SOURCE_APP_JDBC_DATABASE_TYPE = ORA
SOURCE_APP_OLAP_SERVER = olapServerName:port
SOURCE_APP_OLAP_USERNAME = olapUserName
SOURCE_APP_OLAP_PASSWORD = olapUserPassword
SOURCE_APP_OLAP_APPNAME = SOURCE_APPTARGET_APP_JDBC_CATALOG = TARGET_APP
TARGET_APP_JDBC_DRIVER = Hyperion.JDBC.Oracle.OracleDriver
TARGET_APP_JDBC_URL = jdbc:hyperion:oracle://RepositoryDatabaseServer; SID = DatabaseSID
TARGET_APP_JDBC_USERNAME = DatabaseSchemaName
TARGET_APP_JDBC_PASSWORD = DatabaseSchemaPassword
TARGET_APP_JDBC_DATABASE_TYPE = ORA
TARGET_APP_OLAP_SERVER = olapServerName:port
TARGET_APP_OLAP_USERNAME = olapUserName
TARGET_APP_OLAP_PASSWORD = olapUserPassword
TARGET_APP_OLAP_APPNAME = TARGET_APP2. open CMD and type copyapp /S:yourSourceAppName T:yourTargetAppName P:yourPropertiesFileName.properties /L:yourLogFileName.log
Once the migration has been successful, you must update your users using the UpdateUsers.cmd (UpdateUsers.cmd and PlanningUserName PlanningUserPassword TARGET_APP).
I hope this helps...
Kind regards
André -
A graphic imported from Photoshop is pixelated
I have a problem when you try to import a graphic file, even a .psd file in flash pro. The problem is that when imported, the graphic is pixelated and the edges of the graph doesn't look like not smooth (not curves but pixelated lines). Interestingly, the problem only happens when I test the movie, but everything by editing the graph seems very well.
I use windows and have flash and photoshop cs5. How can I transfer my graphics from photoshop to Flash without the pixelation of the curved lines? Thank you.
To add to what Adninjastrator said, you might think also about creating vectors in Photoshop as most games use vectors because it isn't Pixelize any size
Learn more about the drivers at the following link...
http://www.melissaevans.com/tutorials/vector-art-with-Photoshop
Maybe you are looking for
-
iPhone 7 more stuck on black screen with the spinning wheel
How can I fix it? I tried to reset, go into DFU mode, recover from iTunes. Nothing works. I can't use iTunes because he wants me to grant access from my iPhone is not responding. DFU mode doesn't work, the screen does not any combination of seconds I
-
Satellite Pro L500 - 19 X boots ok but keyboard and touchpad are unable
Satellite Pro L500 - 19 X running on windows 7. The machine boots ok, then on the connection or the work of touchpad or keyboard screen.The only way I can solve this problem is to go back to a previous restore point.After that, the machine works fine
-
I have created a book using iPhoto and I want to buy it, but it keeps telling me that some executives lack pictures. They are not lacking. I looked at several different ways and I can't solve this problem. Help!
-
Background Intelligent Transfer Service is not running. Whenever I try to start it, it gives "error 126: the specified module could not be found". I checked all the dependencies, they work fine. My operating system is Windows 7. Can provide you answe
-
MechWarrior 4, 4 Black Knight and the help of mercenaries for Vista
Hello! Whenever I start the MechWarrior 4 and on the games on my Vista computer it starts, pulls me to the automatic configuration screen, which I've implemented according to the specifications of my system, then taking me in the EULA. Once I accepte