How to use the SPACEBAR instead of mouse click

Similar Questions

• How to use the model instead of RP pspice to create the new component?

  Hi, I need to create the model of opa890 of TI, but I found no spice I find model pspice, how to use it to create the new template part.

  Fouda, salvation

  I took a quick glance to the component but for some reason, the model pspice does not correctly applied to the component. The second problem was that the pins have been mapped properly. I've done the component for you with the model and print and attached it to this message. You just need to add it to your database of click with the right button on the component, and then clicking on save to DB component.

  If all goes well, you should start to see the results of the component. I hope this helps.

  Best regards

• How to use the Arc keyboard and mouse Arc using the same USB Transceiver?

  I bought a bow from Microsoft and Microsoft Arc mouse keyboard.

  Both devices come with their own 2.4 GHz USB tranceivers.

  I want to connect the keyboard and mouse to a transceiver.

  I can't find any instructions on how to do it.

  In comparison, my Logitech keyboard and mouse comes with software that allows me to pair several devices to the same Transceiver.

  How to connect the keyboard and mouse to a transceiver?

  P.

  As far as I know, you can do that.  If you want the keyboard and mouse on a transceiver, you buy a keyboard/mouse kit, commonly known as a desktop computer.

• How to use the partition instead of group by?

  Hello
  
  I'm unable to use the partition by clause in the following cases,
  
  the column with null values other_number contains 10 records in 'une_table '.
  5 records where the date 01/11/2009, item_code = 1
  5 records where the date 01/10/2009, item_code = 2
  
  This query returns all of the records of 10, (which assume back 2)
  SELECT count (a.anumber) on (partition TO_char(a.some_date,'MM'), a.item_code) AS i_count, a.item_code,.
  TO_char (a.some_date, 'MM')
  Of une_table
  WHERE to_char (a.some_date, 'yyyy') = 2009
  AND a.other_number IS NULL
  
  
  Works great if I wrote like this,
  SELECT count (a.anumber) AS i_count, a.item_code,.
  TO_char (a.some_date, 'MM')
  Of une_table
  WHERE to_char (a.some_date, 'yyyy') = 2009
  AND a.other_number IS NULL
  TO_char(a.some_date,'MM') group, a.item_code
  
  How to use partition of in this case?

  Hello

  Almost all of the aggregate functions (the ones you use in a GROUP BY query) have analytical equivalents.
  You seem to have already discovered that, regardless of the values returned by
  a comprehensive funcition using ' GROUP BY x, y, z "can also be found
  an analytical function by using "PARTITION BY x, y, z".

  Aggregate queries to collapse the result set.
  The COUNT aggregate function:

  SELECT    deptno
  ,         COUNT (*)   AS cnt
  FROM       scott.emp
  GROUP BY  deptno
  ;
  

  indicates how many 14 employees are in each of 3 departments.
  The fact the analytical COUNT function:

  SELECT    deptno
  ,         COUNT (*) OVER (PARTITION BY deptno)   AS cnt
  FROM       scott.emp
  ;
  

  but the first query produces 3 production lines, the second query produced 14.
  You could get 3 rows of output using the analytical function and SELECT SEPARATE , but it is inefficient.

  Which should you use? As with many other things, the answer depends on what data you have and what results you want from this data.
  If you want has collapsed of results (one line per group), it is an indication of striong you'll want features global, not analytical.
  If you want a row of output for each row in the table, it is a strong indication that you'll want to analytical functions.

  If you have a specific question, ask. Post some sample data and the results desired from this data, as Rob has said.

  There is another important difference between the aggreate and analytical functions: analytic functions can easily be restricted to a window , or a subset DataSet. It's something like a WHERE clause and a WHERE clause applies to the entire request: a condition of wondowing applies only to a single line.
  If you need calculate a SUM of lines with a previous of this line order_date , or an average of last 5 lines, then proabably you want to use the analytical function.

• How to use the variable instead of the table name in the select statement of procedure

  I have a procedure with a select statement with dynamic from clause. How can I use instead of the name of the table variable.
  
  create or replace procedure scc_chemical_analysis
  is
  v_table_name varchar2 (100);
  Start
  
  declare
  cursor c1 is select * from v_table_name; -This is the variable name. How can I use it in the select statement.
  .
  .
  .
  .
  
  
  
  end;

  Hello

  something like that.

    1  declare
    2     vSQLString      VARCHAR2(32000);
    3  pTableName varchar2(1000):='EMP';
    4  BEGIN
    5     vSQLSTRING :=
    6  'SELECT ''x'' FROM ' || DBMS_ASSERT.sql_object_name(pTableName) || ' WHERE rownum<=1 ';
    7     EXECUTE IMMEDIATE vSQLSTRING;
    8* END;
  SQL> /
  
  PL/SQL procedure successfully completed.
  

• ScriptUI use the SPACEBAR instead of the back button

  Is anyway to have the space bar as the back for a ScriptUI dialog window button?  Similar to the way that the {name: 'ok'} works.  Right now the space bar to activate any button is highlighted, but ideally, I try to get so that the space bar will hit always 'yes', regardless of what is highlighted.

  function temp() {
      var dlg = new Window('dialog');
      dlg.orientation = 'column';
      
      var myPnl = dlg.add('panel');
      myPnl.orientation = 'row';
      
      var one = myPnl.add('radiobutton', undefined, 'IHP East (&1)' );
      one.value = true;
      one.shortcutKey = '1';
      var two = myPnl.add('radiobutton', undefined, 'IHP West (&2)' );
      two.shortcutKey = '2';
      var three = myPnl.add('radiobutton', undefined, 'Three (&3)' );
      three.shortcutKey = '3';
      
      var btnPnl = dlg.add('panel');
      btnPnl.orientation = 'row';
      
      var yes = btnPnl.add('button', undefined, 'Yes', {name: "ok"} );
      var no = btnPnl.add('button', undefined, 'No' );
      var can = btnPnl.add('button', undefined, 'Cancel' );
      dlg.defaultElement = yes;
      
      yes.onClick = function() {
          dlg.close();
          $.write( "Yes\n" );
      }
      
      no.onClick = function() {
          dlg.close();
          $.write( "No\n" );
      }
      
      can.onClick = function() {
          dlg.close();
          $.write( "Cancel\n" );
      }
      
      dlg.show();
  }
  
  temp();
  

  Thank you!

  AHA!  Just kidding, the only problem is that you must have any element in short order for the keypress event to work!
  In my case, as long as you click at least 1 element that can be centered (not the statictext), then it does.

  Interestingly, affecting the value and assets radio buttons true does not recognize the update... If done during the construction of the window - but moving in function onShow done the tour!

  #target illustrator

  function test() {}

  var l is new window ("dialogue", "Test");.

  var s = w.add ("statictext", undefined, "Hello!");

  var rg = w.add ("group");

  OP1 var = rg.add ("radiobutton", undefined, "Option 1");

  OP2 var = rg.add ("radiobutton", undefined, "Option 2");

  w.addEventListener ('keydown', {function (k)}

  If (k.keyName == 'Space') {}

  Alert ("good job!");

  This.Window.Close ();

  }

  });

  w.onShow = function() {}

  OP1. Value = true;

  OP1.active = true;

  };

  w.Show ();

  };

  test();

• How to use the license instead of the license key file.

  Hi team,

  I got the license file, whenever I try to install the virtual Center for the vmware license server server I get the prompt to enter the license key. However, I have only the .lic file.

  Please guide.

  Concerning

  Sylvia

  I think the license files are for the older 2.x vCenter.  Looks like you have installed vCenter 4.  Uninstalling vCenter 4, then download and install vCenter 2.5.

  Note also that this is the forum for the free VMWare Server2, not for vCenter Server.

• How to use the acronym

  How to use the acronym instead of this?

  Please explain

• How to use the capture and the print button

  I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?

  Thank you

  Andi Starbuck

  That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?

• How to use spell checking with magic mouse

  How to use spell checking with magic mouse

  Hello

  The mouse is not intended to be used with the spell checker.

  The mouse settings available in system preferences > mouse

  Spelling and grammar can be checked in the Edit menu in most applications.

  In addition, shortcuts keyboard.

  Command:

  And the command;

• How to enter the password instead of the fingerprint

  I borrowed my brothers computer laptop HP with Windows 7 Home.  He gave me the password of connection and just say, "use the password instead of the fingerprint", but there is only the only thing user of icon on the login page and it requires the imprint, then, how to move if I put the password?

  So it's either fingerporint or nothing?  What happens if the fingerprint reader breaks?

  I expect that the reboot of the machine in Mode safe will not load finger fingerprint driver which would then expose the password input box.

• I can't fix my mouse to use the option with a single click in windows 8. The two click works fine, but I prefer the one click option

  With Windows Vista and Windows 7, I put the mouse to use the option with a single click to open files and programs desktop.  I can't find this option in Windows 8.

  Hello
   
  Thanks for the post about Microsoft Community.
   
  I understand that you don't want to use the simple click instead of double click of the mouse that you used in Windows Vista and 7.
   
  I would ask you to please follow the steps below to activate the option just click on the button of the mouse in Windows 8.
   
  un) Please move the cursor to the bottom right and click on the search box, which is the first option in this Panel.
   
  b) in the search box, type Control Panel, and then click Control Panel.
   
  c) after opening the Control Panel, you will see many programs such as the system, network and security, Internet, hardware and sound, and other programs. Click "appearance and personalization".
   
  d) now click on the folder option to open it.
   
  e) now you will see many options in the folder option. Now, click single-click to open an item (point to select).
   
  f) now click on apply and ok to turn this feature on your computer.
   
  I hope your problem is solved now. Please feel free to write back if the problem still persists.

• When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.

  When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.  How can I get the pen tool to release the anchor

  Try this.go in the menus. Select cc illustrator > preferences > display selection & anchor > then make sure the box "activate the rubber band for" the pen tool is not selected. Then press OK. It should work.

• How to use the sign ' # ' in jQuery for id?

  How to use the sign ' # ' in jQuery for id? When I try to use it as ($('#PropertyAttributeValue').css ('color', 'red') ;) I got error as follows:)

  The CFML compiler treated:

  • An expression that starts at line 64, column 37.
    The expression might be missing an end #, for example, #expr instead of #expr #.
  • The body of a beginning of tag cfoutput on line 19, column 18.

  Use the two hashes to escape the first:

  ($('##PropertyAttributeValue').css ('color', 'red') ;))

• How to use the TRUNC function with dates in the expression builder in OBIEE.

  Hello
  How to use the TRUNC function with dates in the expression builder in OBIEE.
  TRUNC (SYSDATE, 'MM') returns 1 July 2010"where sysdate is July 15, 2010 ' in SQL. I need to use the same in the expression builder in the logical layer mdb column.
  
  
  Thanks in advance

  Use it instead:
  TIMESTAMPADD (SQL_TSI_DAY, (DAYOFMONTH (CURRENT_DATE) *-1) + 1, CURRENT_DATE)