How to use the Arc keyboard and mouse Arc using the same USB Transceiver?

Similar Questions

• How to install a wireless keyboard and mouse in Windows 7

  I installed windows 7 on my neighbor's computer.  I do not have the keyboard and the mouse at the time so I used one of my own (not wireless).  Now, I have a keyboard and mouse, but can not understand how to operate.  The computer is a gateway FX400 XL.  I went to the front door and downloaded a driver entered Gateway 400 series for Windows 7 32-bit system.  I then ran the installation for this driver who really seemed to be for Windows XP.  I shut down the computer, unplugged my mouse and keyboard, and return the computer.  I have a cursor on the screen but it won't move and the keyboard does not work.  I then plugged my keyboard and mouse again and still works.  Any ideas as to what I should try next?

  Hello Willie Wonka 2,.

  Mouse and keyboard wirelesss should have with its own installation disc you need to first install. You should also have a "receiver" which the mouse and the keyboard must be synchronized with to make them work properly. If you look at the bottom of the mouse and keyboard, you should see a button 'tiny' with the words 'connect' next to them. You must move the mouse close the "receiver" and press the button connect the mouse with a blunt object (pencil will usually do). All the lights of the "receiver" will start to Flash when the mouse connects. When they stop flashing the connection generally were filed. You will need to do the same thing with the keyboard.

  Regarding the drivers, you should check the site of manufacturers of keyboard and mouse for the updates.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Satellite L30-115: does not start when external keyboard and mouse are connected

  My Satellite L30-115 starts when my external keyboard and mouse are connected to PS2 USB adapter.

  Everything is OK, when they are not connected, and they work fine when they are connected after boot.

  Someone has any idea how to solve this problem?

  Hello

  I don't think there is a way to solve this problem. Also, I assume it is the related issue of the BIOS. Is perhaps the time to be up-to-date and use new and compatible equipment. ;)

• How to change the mouse keyboard and mouse wireless in one click?

  Original title: How can I change the mouse to a single click? more it is difficult for an older person with arthritis.

  I would change the mouse keyboard and mouse wireless in one click. I have windows7. with windows xp, it was part of the accessibility options, but I can't find this option now. Any help would be appreciated. Thank you

  Hi knufyn,

  I certainly understand your concern and I will be happy to provide the steps to check if we can change the settings click on the mouse.

  Let us, perform the following steps and check if you are able to change mouse click settings.

  By default, the mouse is configured to use the double-click to open an item (single click to select) in Windows 7. To configure the mouse to use the single-click to open an item (point to select) setting, follow these steps

  un) Click Start

  (b) type appearance and personalization in the start search box, and then click appearance and personalization in the list programs.

  Note: If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  c) in appearance and personalization, click on Folder Options.

  d) in the general tab, click single-click to open an item (point to point)

  (e) click apply and click OK.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• How can keyboard and mouse issues - I solve them? Is this a problem with the computer or device?

  Hello

  Recently (within the last week), I ran into a problem where my computer thinks certain keys/buttons are down.

  They are:

  W

  A

  S

  D

  Q

  E

  Maj

  Space

  Control

  Right-click

  Left click

  These are my most commonly used keys/buttons, so it can become very annoying. In addition, most of the F keys get stuck, but it's because there is something that needs to be cleaned under the feet.

  My questions are: How can I fix? Is this a problem with my computer or my keyboard and mouse?

  He questions, here are my computer Incase care, as well as my keyboard and mouse:

  Inspiron 620, 8 GB RAM Dell, AMD Radeon HD 6450, everything the way it came to the left

  Mad Catz Cyborg S.T.R.I.K.E. 7 keyboard

  Mad Catz Cyborg R.A.T. 9 mouse

  Hello

  Welcome to the Dell Community Forum.

  This can happen due to wear normal use of the keyboard and the mouse, click on this link http://ow.ly/Ermrr which has some steps and download the FIxit. Restart the computer and let us know if this changes anything.

• Use the keyboard and mouse with xbox 360

  original title: xbox 360

  is it possible to use a keyboard and mouse with an xbox 360 or play them on pc?

  Hi specter1,

  You can use a keyboard and mouse on your Xbox 360. Here's how: http://www.ehow.com/how_6098963_use-keyboard-mouse-xbox-360.html

  teengeek.freehostingcloud.com

• my pc by using the keyboard and mouse of windows7 freeze after 20 minutes of inactivity

  my pc by using the keyboard and mouse of windows7 freeze after 20 minutes of inactivity

  Hi paulbartolotta,

  Welcome to the Microsoft community. According to the description of the problem, the keyboard and the mouse gel. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What is the brand and model of the keyboard and mouse?

  I'll help you with this problem. I suggest you follow these methods.

  Method 1: Run the tool and troubleshooting hardware devices.

  Method 2: Try to use the mouse/keyboard to a different USB port and verify.

  Method 3: Try using the mouse/keyboard on a different computer.

  Method 4: Update the latest drivers/software for the mouse/keyboard.

  Updated a hardware driver that is not working properly

  I hope this helps. Let us know if you need help with windows.

• How can I repair my broken Magic Keyboard and Mouse?

  My niece who is 23 years younger than broken me my Apple Magic keyboard and mouse Magic Mouse from Apple for my iMac, and all of them are not in stock because they are used on Mac computers, and I don't want to lose a keyboard and a mouse, another Mac as on my Mac Pro. She said I was due, but I SLEEP, then all of a sudden, I heard the noise. Is there warranty for the keyboard and mouse? How can I replace it with Apple because she says it's worth $ 5, and piano of plastic doll is worth $ 500 and the cheap plastic. Should I go to the Genius Bar because the keys are gone, and the mouse is broken.

  Apple does not cover such damages, regardless of warranty.

  You can buy new online through a variety of websites looking for them online, that they do not have to come from Apple.com. Stores of brick and mortar like best buy or Wal-Mart can take so if an Apple Store is not an option. There are also alternatives and sometimes a lot less expensive replacements through various vendors such as Microsoft and Targus just to name a few.

• How long does take to recharge magic keyboard and mouse 2

  How long does take to recharge magic keyboard and mouse 2

  I read somewhere 2 minutes to load the Magic Mouse 2 for 9 hours of use.

  If you have them already, their time and their connection.

• Questions about the standard wireless keyboard and mouse on a h8 - 1360 t.

  Hi again,

  I have a h8 - 1360t with the standard wireless keyboard and mouse.

  1. where is information on the blue buttons 'connect' keyboard and mouse?

  2. the mouse has a power switch - do I really have to close each time, or is there a function of inactivity when the system is off?

  3 lets say that I have two exact systems within 5 feet of each other. Will the two keyboards and mouse conflict?

  Looking forward to your answers.

  Thank you

  BJ

  This document will show you how to sync mouse wireless and keyboard if they connect buttons.

  You don't need to turn off the wireless mouse. If you have problems with the batteries run out frequently, it might be useful, but I've never needed to do.

  Two different sets of wireless mice/keyboards are not usually a problem. If there is a conflict, go through the process of connection of each game.

• Keyboard and mouse stop working at the login screen, but work very well before he gets to connect.

  My keyboard and mouse suddenly stopped working today, I was pressing F11 to try to get the system to boot from a recovery screen and it wouldn't, but when he returned to my screen connection and requested my password it won't let me not use the mouse or the keyboard, I wonder if I accidentally turned off something and if anyone knows how to turn it on turn it back on. I'm using vista on a HP dv5

  Thank you

  Hello Djc618,

  Thank you for your message.  You have a friend or a family member that can allow you to use a keyboard to see if the material can be defective?  You can also try using your keyboard on another computer, if this does not work then you probably have a bad keyboard.
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• keyboard and mouse periodic; LY stop and start the rear closing down

  I have a Compaq Presario 5710 desktop PC. Recently the keyboard and mouse just stopped working. I stopped and restarted and it worked OK fo a few weeks and it's the same thing.  By clicking on a button or mouse had no reaction whatsover until I have stop and restarted. These aren't the USB devices.

  I checked that all the drivers are up to date and Windows 7 is up to date.

  Can someone point me in the right direction to solve this problem?

  Thanks for the information,

  I have a few links that may be useful for you. Here is a link to information on the reduction of heat inside the computer. Heat is one of the main causes of the computer freezing and becoming unresponsive.

  Here is a link with some troubleshooting for lock upward and performance problems. I also recommend doing a clean boot on the computer. You will thus limit the start up programs that might cause a problem. Here is a link with instructions on how to do a clean boot.

• Keyboard and mouse did not work properly after the service pack 2 update

  key Board runs very slowly and mouse runs through the screen when it is used. Acer Aspire 5050-3371 came with Vista home

  Hello

  Do you use a touchpad or mouse wired / wireless?

  Your laptop is connected with laptop keyboard?

  I suggest you to check if the keyboard and mouse work will find in safe mode. Follow the steps that will help you perform the following checks:

  Method 1

  a. restart the computer.
  b. start typing the F8 key.
  c. you get early boot option window.

  For more information, see: the boot advanced (including safe mode) options

   

  After the entry into SafeMode Log in your user account and check if the keyboard and mouse are working.

  After you perform method 1 Troubleshooting and if you find the keyboard and the mouse does not work correctly then you can perform the following procedure.

  Method 2:

  You can also perform the clean boot and check if you are able to start successfully. Clean boot will start Windows Vista by using a minimal set of drivers and startup programs and helps eliminate conflicts of third party software.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7:http://support.microsoft.com/kb/929135.

  Hope the helps of information. Please post back and we do know.

• Connect the keyboard and mouse wireless with new transmitter/receiver

  Hello.

  I have a keyboard and wireless Microsoft mouse 2000 but the transceiver does not seem to work.

  I also have another transmitter/receiver (same model) which belongs to Microsoft Wireless Keyboard and Mouse 5000, so my question is:

  is there a way to use the wireless 2000 with this new transceiver box? How can I change the transceiver settings so that it finds the keyboard and mouse?

  Thanks in advance

  You can not.

  The receiver is synchronized with the keyboard and the mouse in the factory and cannot be re paired at the level of the Office

• Logitech software unifyier do not see a receiver is connected and so I can't pair the keyboard and mouse to the computer.

  I bought a logitech keyboard and mouse.

  I contacted support and they work in another machine (vista), they say, that there is an error on this machine.
  When the connection to the wireless receiver, it shows and installs in windows 7 64 bit home edition premium, however, unifyier of logitech software can not see a receiver is connected and so I cant pair the keyboard and mouse to the computer.
  I've tried different usb, front and rear ports and USB 2.0 and 3.0, but there is no change.
  Any ideas how to get this to work on windows 7 that I checked and the devices are compatible with my version of windows
   
  Original title: keyboard and wireless mouse

  I suggest to download and install the Logitech Unifying software and restart the computer and check if it makes a difference. Logitech Unifying software lets you manage your devices that use a Unifying receiver. You can add or remove devices using Wizard of the software or to use advanced mode. The Advanced mode also displays the status of your paired devices, version of the firmware and battery level.

  http://www.Logitech.com/en-us/support/Unifying?section=downloads&bit=32&OSID=14&file=http%3A%2F%2Fwww.Logitech.com%2Fpub%2Fcontroldevices%2Funifying%2Funifying210.exe

  See also: http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/38032/session/L3RpbWUvMTM3NTkyODY1Ni9zaWQvQ1g2bDJkeGw%3D