How to configure the virtual disk as SSD for the customer?

Similar Questions

• How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

  How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

  This is not possible with the way in which we collect information.

• How to configure the CD driver on the host for a virtual machine?

  After you create a virture machine and put the CD of driver on host, when powered on the vertual machine, may not start the drive form the CD only from NIC.

  How to configure the CD driver on the host for a virtual machine?

  Right-click on the virtual computer and go to edit settings. Click the Options tab and under the tip list, there should be Boot Options. Enter an amount of milliseconds to wait before your boot, so you can activate the CD-ROM. You can also activate the CD even if it boots to the NETWORK card option, and then reset the virtual machine. Get the focus of this virtual machine on the console session, and then press ctrl-alt-insert. Your CD-ROM will stay connected if you do not want to delay the startup process.

• How to configure the network adapter when you run ESXi on VmWare workstation?

  How to configure the network card installing ESXi on VmWare workstation 6.0.0?

  These are the options: I tried bridged, host-only NAP.  None of them works

  

  What Miss me? driver or adapater?

  I'm running on vmware workstation on Windows 7 with Lenovo laptop.

  in the configuration of your virtual machine, the main issue is memory. you gave the 2 GB of RAM, whereas ESXi 6 cannot go forward without minimum 4 GB of RAM.

  If please have 4 GB of RAM and re-run Setup. you will get through.

  message about the network card should also not appear after that. What kind of network you choose depends on your need.

• How to extend a virtual disk in a workflow

  Hello together,

  I have a problem in the creation of a Workflow.

  I want to deploy a virtual with a CustSpec computer (works fine). After the deploymente, I want to thank the disc - it's my problem.

  Did anyone of you knows how to expand a virtual disk to a virtual machine?

  Thank you very much

  Marc

  I have not tried this at my end, but you can try something like this:

  You need create a scriptable task and the research of the class script VirtualLsiLogicController from the API Explorer. The properties that need are required to set as seen in the reference of vSphere are:

  -busnumber (can be set to 0)

  -button (can be set to 0)

  -sharedBus (set VirtualSCSISharing.physicalSharing) / / VirtualSCSISharing is an enum type, consult the API Explorer

  After you set the object above (VirtualLsiLogicController), it defined in the the virtualdeviceconfigspec object and the value of this deviceconfigspec to the devicechange of the virtualmachine context property (as previously done for adding a virtual disk).

  I hope that helps!

  -Angela-

• How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Hi stuckfree,

  The question you posted would be more appropriate on the TechNet Forums. I would recommend posting your request here.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• How to configure the router Linksys DD - WRT for WVC54GCA E4200

  I don't know how to configure the router Linksys DD - WRT for WVC54GCA E4200. DD - WRT is very complcated. Help, please! Also, I used the TZO.com to the DDNS. Can I set up the DDNS for DD - WRT router? I used the DDNS to my old model router before. Thank you.

  I followed the TZO supporter last night. I can watch my WVC54GCA outside. All solution links:

  http://tzodns.com/support/tutorials/188

  http://tzodns.com/support/tutorials/190

  Hi Majekho,

  Your domain name has decided to 99.245.xx.x. If you go to www.test.tzo.com from the location of the host, you must see this IP address. If these numbers are the same, then all with TZO works correctly. I guess that it is a simple problem with ports (80, 1024) is not open in the router and forwarded to the right internal IP address of the device (for example. 192.168.1.xxx).

  In addition, if you have a DSL, you will need to call your ISP and ask them to show you how to put your modem in "bridge mode". This will disable the firewall in the modem that blocks incoming connections even if you open ports in your router.
  In addition, during the test, it is best to test on your device remotely, this is due to a common problem called loopback with most routers. For more information about looping, take a look at:

  http://helpdesk.TZO.com/cgi-bin/KB.cgi?view=140

• How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?

  How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?  The Office has 5 staff members each with ending with [email protected] for example e-mail addresses.  We have also created an email for option analysis as [email protected] (not sure if creating an e-mail address for the scan option is required).  We are not part of any domain, and there is no server in the office.  When you try to configure the email on the printer/scanner control panel it asks the host name.

  What host name that I can use?

  If you try to configure the browser by using the IP address of the printer, he asks as the SMTP server. The MS Outlook 2010 all our emails use mail.junior - albania.org incoming mail server and outgoing.  Other settings in MS Outlook 2010 are box My outgoing server (SMTP) requires authentication checked and use the same settings as my mail server entering selected.  On the Advanced tab: incoming server (Pop3): 110 (SSL encryption is not checked) and outgoing (SMTP) server: 465 use the type of encrypted connection (SSL) following.

  What server SMTP should I use in this case?

  I would appreciate your help in the configuration of the HP printer/Scanner for scanning and sending by electronic mail to the members of the office staff email addresses.

  Thank you...

  I'll link you to the product page with several documents which I hope will help you to configure your e-mail settings. Please look through them and see which ones fit your needs:

  Scan and send (e-mail, send to folder, digital sending, etc..)

  Here is another site that has some videos that will guide you through the entire upward (here I would try everything first )

  Simulations of MFP - digital send

  If these don't work, please let me know and I will continue to search it for you.

• my windows pc very experience 1, I am embarressed to admit that I can not understand how to configure the windows/outlook e-mail system. This pop and smtp or what ever Q was, I still can't understand.

  I'm unable to set up Outlook, or now called windows mail, I think. but for the life of me I do not understand how to configure the e-mail program that comes with now it windows Vista 64 that came on my new pc.  can someone please?  Thank you

  Windows Mail is/was not Outlook.

  Windows XP e-mail program called Outlook Express.

  Outlook is a part of the office.

  Windows Mail in Vista is the replacement of e-mail for Outlook Express (XP) program.

  Read this section on how to set up Windows Mail in Vista:

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• My IP security camera is different my network ip address, how to configure the camera to match the ip address with the router cable time Wörner

  Please someone help me configure my camera IPsecurity model m12 mobotix ag. It allows to work in the corporate network, but they close down and I didn't bring the camera House but there different IP address of my network and I don't know how to configure the camera to have the same IP address with my home router to TWC, thanks

  Router connections by opening network, in the Panel control, search for the router / properties, enter its configuration

  data in the boxes provided, you will get on the router, a sticker shows data. If lost or deleted, go to its Web

  for the data. Also, perhaps the home page of IP camera offers software/drivers.

• How to configure the logo screen of handguns to several domain user time?

  How to configure the logo screen in time to punch to several domain like domain1\administrator, domain2\administrator and My-PC1\administrator user in windows 2007?

  Hello

  It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  For reference:

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/thread/de5fea8e-E327-4D71-a599-546dea543149

  Hope this information helps.

• How to configure the bluetooth with Kyocera android phone connection to share photos, music & video files

  Original title: Windows 8 Configuration bluetooth with Kyocera android phone?

  Configuration of bluetooth of Windows 8 with Kyocera android phone?  I got a laptop with bluetooth Tech. How can I set up a connection and share photos, music & video files?

  Hey GQ - Jon'Jon,.

  Make sure that Bluetooth is enabled on the computer as well as your Kyocera android phone.

  Make sure that the phone is paired with your computer.

  For information about how to configure the Bluetooth with Kyocera android phone connection to share photos, music & video files, it would be better if get you in touch with Kyocera phone support for assistance. Please see the support link:

  http://www.Kyocera-Wireless.com/support/phone/

  Please feel free to respond if you face problems with Windows in the future.

• How to add images to my table and how to configure the Web site? Help, please

  I do not understand how to configure the Web site and add images to a table and make hyperlinks.

  First, set the folder of your Local Site saying DW where to save the files on your local hard drive.  Go to Site > new Site.

  I think it is easier to start with a page layout predefined by using one of the appropriate templates to bootstrap that comes with DW.

  Go to file > new > (Starter models > models Bootstrap). Select one:

  • Bootstrap-Agency
  • Bootstrap-eCommerce
  • Bootstrap-Portfolio
  • Bootstrap-product
  • Bootstrap-real estate
  • Bootstrap-curriculum vitae

  Press the button create.

  For pictures, go to insert > Image. Select an image and save it in the folder of your local site.

  Nancy O.

• How to configure the e-mail address of the form home and contact me form

  How to configure the e-mail address of the form at home and contact me form. I got two WARNING when exporting my muse as HTML file

  Muse will give the alert message if the e-mail address used is not on the same domain as hosting many platforms is not supports the emails from the external domain.

  You can check with your accommodation, where they take over other emails from field so it will not be a problem and you can ignore the warning message.

  Thank you

  Sanjit