HOW TO USE TWO MONITORS WITH MY PRO TOUR

Similar Questions

• How to use two monitors with Pre10

  I always use Pre3 on my XP machine and I drag CAD of the monitor Panel to monitor 1 to monitor 2 but that doesn't work in Pre10. It is not the monitor in Pre10 Panel can be moved independently of the rest of the screen. I can drag the entire program in my other monitor, but still not get the monitor Panel to separate. It would seem that if it was possible in the Pre3, it should be possible in Pre10.

  Thank you

  To remove panels, you must first go to the window menu and select show-host headers, and then drag free panels of these headers on the top of each Panel.

  The versatile tasks Panel is the only Panel that don't désamarrera interface.

• When you use two monitors Media Player will not playback on screen #2 video (not a problem with the monitor #1).

  I'm sorry for the long post, but this is the type of problem that is easy to explain in person but if transported by writing it might take a little longer for the sake of the definition. Please read on without fear because this problem is not as complicated as you might think, I hope.

  I use two (2) screens of computers with the same system but why Media Player does not work on a single monitor and not the other monitor?

  I use two monitors with my PC thanks to the CLONE function and things last a lot. #1 monitor is a computer 19 "monitor. Monitor #2 is at the end of the piece. VIZIO, the manufacturer, markets a monitor #2 as a computer screen, nope, it's a 47 '' Vizio HDTV that I use as a computer screen. I use the installation without any problems for over a year now until yesterday. The problem: now, when I use two monitors to play a video, the sound will play but not the video. What I see is a black screen empty. This negative situation applies to only monitor the #2 and does NOT monitor #1.

  > very important Please note... when I have both monitors running and I play a video that you can actually see the video play on the #1, the 19-inch video monitor! There is absolutely nothing wrong with the video player when it runs on the small computer screen 19 inch. But when you turn your head to look through the living room where I Monitor #2 placed you won't see the video running on #1 monitor as you normally would before that dysfunction appeared. (No, instead of this you will see the Windows Media Player (or Nero or RealPlayer) readers 'playing' a black screen blank even if 1) both monitors are indeed cloned and 2) video plays without any problem on monitor # 1. Monitor #2 with media work (sort of) because the volume level is adjustable, and you can see the bar jump up and down and all around media player progression but the problem is that there is simply no video when you try watching the video on a monitor #2.

  > except to play videos through a Player multimedia, I can use my Vizio TV as a monitor for what is related to the computer, there is no another negative question. I can surf the web, edit videos, etc. When I run a video from Youtube to my computer the monitor #2 TV Vizio, the Youtube video plays well. Ditto for Netflix, no complaints there. In fact, I just typed this post on and displayed using Monitor #2... But if I want to watch a video that I saved in a folder XP then the only option is to use the #1 monitor.

  Thanks in advance for your help :)

  Do restore of the system as a first step. If this fails,

  1. uninstall all software of Monitor 2

  2. unplug the monitor 2

  3. restart the computer

  4. connect the monitor 2

  5. install all the software monitor

• Two monitors with x 200 and docking station

  Hello

  Is it possible to use two monitors with my x 200? I use a docking station that has 1 VGA out. When I plug a second monitor into the VGA output on the laptop, the screen adjusts a car but remains empty.

  Any help appreciated

  Concerning

  Andrew.

  There is also a displayport on the ban, so you can use a dvi DisplayPort converter / for the second monitor.

• How can I get two jobs when using two monitors, instead of stretching a desktop on both screens?

  Hello!

  How can I get two jobs when using two monitors, instead of stretching a desktop on both screens? I n ' want to clone my office, and I don't want to stretch it. I want two desktop computers, where I can "send/give" to the other desktop programs.

  I need a third party program? It is very good. If you know one please tell me about it.

  Hi OskarKvist,

  This feature is not supported by Windows XP.

  However, you can use your favorite search engine to download any third-party software that could serve the purpose.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

• Use two monitors on Mac Mini end of 2012

  Hello

  I am currently using only a single monitor (A Dell S2340M 23 "") with my Mac Mini end of 2012 (with these ports: Mac mini (end of 2012): external ports and connectors - Apple Support), and I am interested in adding a second monitor, something around the same size as my current. How to connect two monitors on my Mac? Thanks in advance.

  The support for the Mac Mini shows article (end of 2012) and details which ports can do.

  So you would probably need to get an adapter Thunderbolt using a second screen, seems.

  See the items listed to connect to the Thunderbolt port in the link you posted. I have the same

  link to my favorites for more than a year...

  I have an i7 Mac Mini end of 2012, using only a screen Apple Cinema (aluminium).

  Another option would also buy a bolt of lightning multiple port dock. Some allow others

  products and ports in double. (Upward to 12 points, USB3.0, Thundebolt, etc) not cheap. A

  A few screens can allow a Garland; Note looks like a bolt of lightning MiniDisplay port but can

  not act like one. Adapters can allow minidisplay run Thunderbolt. See supported

  Article and then see the page of the Apple store in graphics cards.

  http://eShop.MacSales.com/shop/Thunderbolt/

  OWC has also an external optical drive with several ports integrated (with additional HARD disk).

  Good luck!

• As you use two monitors, do HP27q 5 K or 5K AMD R9 295 X iMac-compatible UP2715K?

  Hi, I want to set up 5K double monitor with my iMac 5K (end of 2015, R9 395 X, 4.0 GHz i7 AMD, El Captain 10.11.1).)

  As you use two monitors, do HP27q 5 K or 5K AMD R9 295 X iMac-compatible UP2715K?

  Hi isykzh,

  Thank you for using communities Support from Apple!

  I understand from your question, that you want to use a second display with your iMac and would like another monitor. The following article, the UP2715K Dell would be sustained.

  Double-cable displays

  Some if poster with greater than 4K resolutions requires two DisplayPort cables to connect the screen at full resolution. With OS X v10.10.3 or later version Yosemite, 5K 27-inch Dell UP2715K display is supported on the following Mac computers:

  • Mac Pro (end 2013)
  • iMac (retina 5K, 27-inch, late 2014 and later versions)
  • MacBook Pro (retina, 15 inch, mid-2015) with AMD Radeon R9 M370X

  Use screens 4 K and Ultra HD TVs with your Mac - Apple Support

  Best!

• Double desktop screen "stacked" on first office on a single monitor after using two monitors Netflix to the TV

  Double "stacked" on first desktop on one monitor - desktop screen came just after using two monitors (Netflix on TV extended

  My computer kept crashing after I had hung a dual monitor.  The second monitor was my television, playing a Netflix movie while I also used my computer to work on.  After splitting the two, I kept crashing for a few days.  I tried to delete the second monitor in the display settings, but does not know how to do this, if it's possible, but I think it's the problem and the cause of the double view of the desktop on my computer now.

  Does anyone know how to confirm what the problem is for some, and/or instructions how to solve this problem if you already know what can cause this problem.  No assistance at all would be greatly appreciated.  I tried to understand this two days...

  Note, in the heat of the Las Vegas area, I thought this may be due to overheating, but I actually he cooled in the refrigerator for a short time and restarted, but still have the problem.  Thank you.

  You have a Nvidia 8600 M GS graphics chip located on the motherboard, the drivers for it are provided by your manufacturer, HP, PC-specific to your model and NOT of the site MSUpdate or Nvidia.

  http://www.nvidia.com/object/notebook-Win7-WinVista-258.96-WHQL-driver.html see the following"However, please note that your notebook original equipment manufacturer (OEM) provides certified for your mobile drivers specific to their Web site. NVIDIA recommend you check with your OEM laptop on the software updates recommended for your laptop. The OEM cannot stipulate support technical issues raised by the use of this driver. »

  Since you apperently have a laptop / Notebook, you get all pilots that manufacturers of PC and NOT of MSUpdate site system. Driver version numbers shown on the MSUpdate site cannot be relied on as correct

• Two monitors with computer desktop Slimline?

  Hello

  I want to set up two monitors with my HP Slimline.  Is this possible?  I know I have to change the graphics card to accommodate two cords.

  Slimline s5310f

  64 bit

  NVIDIA GeForce 6150SE nForce 430

  LG E2360V LED monitor

  Hello

  You have options:

  1. install a video card that supports two monitors. -> the best performance option

  2. use a video USB adapter/converter.   -> What are your needs of video connection? VGA, DVI orHDMI

  3. use a USB attachable monitor such as this AOC 16 "monitor.

  Option #1.

  Look here in HP Partsurfer for video cards that are used in the new Slimline models with a 220 Watt power supply.  These cards have been made specifically for the HP Slimline PC with a 220 watt power supply.

• T5565 two monitors with RDP

  I use light customer T5565 for access to the server terminal server. I use image Thinpro T6X43202 Rev 1 (June 6, 2013). When we connect with two monitors Office spans both screens, as if it were a single monitor. It is a big problem because staff can maximize windows without that it spans both screens. Is there a fix out there for this. When I connect with two monitors with a computer dekstop both monitors are working fine. I read forums where people run linux commands to install Freerdp to work around this problem, but I can already see the FreeRDP on the thin client. I want to get a standardized solution to do this, not a single solution not supported. If anyone can help? Thank you!

  It is a forum for users of peer-to-peer supported for class for the HP consumer products. HP maintains no official presence in this forum. It is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  HP t5565 Thin Client is a class computer business and as such, your questions can better serve in the HP Business Support Forum.

  Please see HP Business Support Center - get help from HP to contact HP directly with your support questions.

  Please click the White Star of KUDOS to show your appreciation

• Compare Windows (Snap) using two monitors

  Using Vista and XP Pro, I open two instances of Windows Explorer and organize their visualization side by side, allowing me to move conveniently files manually.

  Windows 7 automates this task through its component feature snap, a feature that allows windows to be compared next by simply dragging an instance of the window on one side of the screen.

  I use two monitors 24 ".

  When I drag a window, like a version of the Windows Explorer, on the left side of the screen of the monitor 1, it fits perfectly and has a width of about 1/2 of the monitor on my left. Allows me to save a lot of time.

  When I drag another window on the right side of the monitor 1, he continues to travel to monitor 2. The window I want to compare not follow until it reaches the right side of the monitor 2.

  Is there a setting that allows the functionality of the component snap to recognize I want the additional window to align on the same screen as the window broken - left?

  Hello Stephenbuck415,

  Thank you for visiting the Microsoft answers community.
  Breaking of Windows works as expected, it will jump to the left edge and the right edge of the desktop. As you said, you extended your desktop on both screens, so the left edge of your desktop on the left edge of the display 1 and the right edge of your office is the right edge of display 2.
  You can use the WIN + l/r arrow in order to place your windows on each monitor.
  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• using two monitors in Lightroom CC2015

  Forgive me if this is really basic but looking for clarity.  When you use two monitors, is the mode of the second monitor always match that of the primary?  In other words, if I'm in the grid of the main library, I can have secondary in magnifying glass and I guess it's still library.  So if I spend primary to develop, the Loupe view on secondary reflects also develop or it always shows the preview of the library?

  I ask this question because something's happening currently with a new computer.  Today, that develop on primary and magnifying glass on secondary, I clicked on secondary to zoom to 100% and she was never completely.  There is always a slight delay that the picture blurs then strong snaps but today he never did.  Just go in the primary and changing to the library, 100% view on secondary became strong.  Then it confusion is this primary switching to develop, zooms now secondary to 100% back fine?

  Thanks for the ideas.

  JR

  So whatever the image is selected on the main monitor will show on the secondary screen with normal eyesight.

  And that's regardless of the module.

• My calendar Scrolls left/right, following my mouse (using multiple monitors with the chronology in the middle)

  I currently use 3 monitors with my calendar on my central monitor. When I move my mouse to another monitor, it follows on the timeline (scroll left and right, depending on how I move my mouse). This happens randomly and reboots do not seem to solve the problem. Any ideas? Y at - it a shortcut that I'm missing?

  Hi all

  Please check this thread: Re: strange behavior of automatic scrolling in editing

  Thank you

  Regalo

• Use multiple monitors with Client view

  Hello

  Quick question regarding the use of multiple monitors when connecting via the customer to view. I have many users using a monitor with a zero multi configuration client and everything works as expected. When connecting via customer discovered however the Office extends on (i.e. Outlook stretches on left and right screens) two monitors instead of 'renewal' (i.e. the prospects on the left monitor, acrobat opens on the right). Everyone is aware of a fix for this?

  Thanks in advance.

  See you soon.

  Are you sure that you are using PCoIP?  View what version do you use?  Which version of the Client that you are using a view?

  Gunnar

• How to use spell checking with magic mouse

  How to use spell checking with magic mouse

  Hello

  The mouse is not intended to be used with the spell checker.

  The mouse settings available in system preferences > mouse

  Spelling and grammar can be checked in the Edit menu in most applications.

  In addition, shortcuts keyboard.

  Command:

  And the command;