My calendar Scrolls left/right, following my mouse (using multiple monitors with the chronology in the middle)

Similar Questions

• 6 of Lightroom cannot read my Canon 5 d Mark III photo files, the import message I received: the following files were not imported because they could not be read. I use the same camera that I used Lightroom 5 with the same cards Compact flash.

  6 of Lightroom cannot read my Canon 5 d Mark III photo files, the import message I received: the following files were not imported because they could not be read. I use the same camera that I used Lightroom 5 with the same cards Compact flash. The files are: DK5A0243. CR2

  Lightroom 6 trying to copy pictures to a different directory than what is Lightroom 5. That's why you have the problem.

  You can change the directory where you are teaching LR 6 to place photos, or change the permissions on this directory to read & write.

• Scroll left, right, up and down?

  I would like to have a site unique page were you can scroll to the left, right, up and down. So the first thing you see when you open the site must be in the middle of the page. Is this possible?

  You can try the suggestion mentioned here:

  https://forums.Adobe.com/message/5762693#5762693

  Thank you

  Sanjit

• Follow an event in a graph with the mouse cursor 3D

  I'm trying to track events in a 3-d Surface chart. I need track the mouse down and mouse up on top of the slider. Mouse works fine, but when I drag the cursor and let, mouse event does not get the subject of a follow-up, and I have to click the mouse button once to catch the mouse event. Any suggestions?

  
  

• Palm TX - calendar office empty and now it seems that it syncs with the device.

  Hello Forum members, Palm

  I have Windows 7 and I synchronize my Palm TX for desktop 6.2.2 via bluetooth.  Two weeks ago, I loaded my calendar of office, and it was empty.  I have made several attempts to synchronize my device to the desktop computer in the hope to recover my datebook\calendar and it seems that the synchronization stops during the update of datebook\calendar.  I uninstalled and reinstalled the desktop software, I also imported the appointment file... but it is also empty.

  Any assistance will be greatly appreciated, thank you in advance :-)

  Lori

  There may be the database at the source of the problem. Click on the following link for the program called DbFixiT. This program has a trial version that you can download and install on your Palm OS device. The trial version will search the database and then to declare the corruption. You can then search records at the origin of the problem and fix them yourself or you can buy the program and do it automatically repair records.

  http://www.pimlicosoftware.com/dbfixit.htm

  To install the program, the value of all lines of "doing nothing" except quick installation or install if you use Palm desktop 6.2.

  After installing the program on your handheld, the scanner and scan also to BLOBs in the calendar.
  After you clean up the database on the handheld, set the conduit in hotsync for handheld overrides desktop and perform a hotsync.

  The best way to protect your data is to export the data in each category of Palm Desktop in a separate folder on your PC.

  Create a new folder on your PC somewhere that suits. Name it something like Palm Desktop data. Click on the link below and follow the instructions on this page for the export procedure.

  http://KB.hpwebos.com/wps/portal/KB2/common/article/28734_en.html
  Make sure you only select everything for the beach in the export window.

  With the data stored in the created folder, make a copy of this file and save it on a USB key, cd - rw or external hard drive.

  Whenever you change in Palm Desktop, export the data that has been changed in this file and save again to external media.

  With this process you can always import the data in Palm Desktop, whenever you have a problem with the data in Palm Desktop, or if your computer/hard drive/device crash.

  For reference purposes, click the following link to the support page for your device on the kb.hpwebos.com Web page.

  http://KB.hpwebos.com/wps/portal/KB/na/tungsten/TX/unlocked/home/page_en.html

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

• Unable to get Web page to fit the screen. Having to scroll left & right all the time

  Just changed computers. Trouble with web pages.  Its so annoying I know that it is probably an easy way to fix it.  Has been

  all the menus but its extremely frustrating to have to keep scrolling to read whole pages. And the HELP BUTTON is useless

  Maybe you're just zoomed in too?

  While in your web browser, try to maintain the "CTRL" key while you scroll the wheel of the mouse toward you.
  Another way to do is to hold down the CTRL key and press on the "-" key (Ctrl - '-' zooms, Ctrl '+' zooms in).

  HTH,
  JW

• After using my Firefox browser to access my Yahoo mail, I don't and then disconnect. Left click of my mouse will not sign off the coast. I have to close my computer to close my e-mail address. How can I fix?

  I'm unable to sign my e-mail at Yahoo. Make a left click on the mouse does not close my e-mail address.

  Hi ampterson.

  It could be that an add-on is causing this problem. First, click on the Firefox button > help > restart with disabled modules. If this solves the problem, it means one of your Add - ons is the cause. See Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems for steps to know which.

• CTRL + a doesn't work in text boxes with latest flash player in games (foe), the only way is with the mouse and pointer, or with the right button of the mouse and the option in flash

  Hi, ctrl + a works in the past in text boxes, now I can't use, is there any solution for that?, but once the text is selected, ctrl + v works, or ctrl + c, I do not know why only crt + a is disabled.

  Thank you

  Sorry, now I see that do not work in my computer, the problem is that I have assigned the CTRL + a in error to another tool who ejecting usb drives.

  Thank you very much.

• My Microsoft Wireless Optical Mouse does not communicate with the Transceiver.

  After the return from a road trip, I plugged my Miccrosoft wireless optical mouse and keyboard. At first, communicate with my Toshiba Satellite laptop, but the keyboard now works. The mouse works sporadically if I push the reset button on the Transceiver and he travels the three lights. When I check the State of the mouse, it shows good batteries (I replaced the still) and the right signal. The computer apparently see the mouse, but somehow the orders do not get through the ARVA. Any ideas?

  Hi Peter,.

  What is the model number of the Microsoft Wireless Optical mouse?

  I suggest you try to connect the transceiver to another port. Then check the behavior of the device. By trying the receiver on a different port, you can eliminate all the problems affecting the port itself.

  You can access the links below and follow the steps described in section troubleshooting problem mouse Microsoft Wireless on your computer and check to see if it helps you solve the problem.

  http://support.Microsoft.com/kb/838398

  http://support.Microsoft.com/kb/321122/en-us

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Comfort 4500 wired mouse appear to interfere with the mode 'sleep'.

  After that I installed the mouse and downloaded the drivers, now the computer won't mode 'sleep'. The screensaver works. I had a similar problem with a Logitech wireless keyboard, but I found the solution to this on their Web site. Any help would be appreciated, thanks.

  Hello

  Hello

  1. don't you make changes on the computer before the show?
  2. not this problem occurs when you try to connect to another mouse on the computer?
  3. you receive an error message?

  
  Method 1:
  You can try the steps in the article of the supplied knowledge base and check.
  A computer that runs Windows Vista seems to sleep and then immediately wake

  http://support.Microsoft.com/kb/927821

  Method 2:
  If the problem persists, then perform a clean boot and check if it
  is due to any third party software.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

• Calendar of Smartphones blackBerry used to synchronize with the new Desktop software

  I recently received the latest version of the desktop software. For some reason, my Outlook calendar sync is no longer with my Blackberry. When I go to the title of the Organizer in the Desktop software, MemoPad address book & tasks are checked and work, however, timing is not verified and in parentheses next to it says not installed. No idea why this is or how I set it up to make it work again.

  Any help is greatly appreciated!

  Check first under Options | Advanced options | By default the Services and make sure that the e-mail address which must synchronize with Outlook is set as the CICAL one

• Sony VGP-BMS30 mouse does not connect with the computer via bluetooth

  Hello

  I can't get my laptop Windows 8 to find the Sony mouse!  I checked and all the settings are correct. Blue tooth is on and wifi etc...  Packing instructions mouse Sony are for Windows XP.  What is the problem?  It is not compatible with windows 8?

  I checked and all the settings are correct. Blue tooth is on and wifi etc...  Packing instructions mouse Sony are for Windows XP.  What is the problem?  It is not compatible with windows 8?

  It's an idea.  A few months ago I downloaded Broadcom.com fresh Bluetooth drivers for my laptop Sony VAIO Windows 7 x 64.  Just in case, because I don't use Bluetooth at all so far.   There is a Guide to Broadcom Wireless Bluetooth in my folder Bluetooth in the start menu, maybe you have also.  You could also ask a Sony VAIO support forum, or even to buy the mouse USB cable is cheaper than you can get up to find a solution for your wireless mouse.  No kidding, without cable you'll need a battery.

• How to customize the behavior of a click on a link with the middle mouse button?

  I have just upgraded to Firefox 24ESR as part of an update to CentOS 5 (RHEL5) and now medium by clicking on a link opens the link in a tab and not in a new window (as he did with Firefox 17ESR). I want to restore the Middle, click on behavior of link to what it was in Firefox 17ESR. I * hate * tabs and do not, ever.

  Hello

  To resolve this issue, go to the Firefox preferences panel and make sure that the tabs > open new windows in a new tab instead of preference is unchecked.

  Then type "Subject: config" in your address bar. In the page that is displayed, please click on the button "I'll be careful." In the top search bar, type "browser.tabs.opentabfor.middleclick." Display preference set to false by double-clicking it.

  I hope this helps!
  
  -Josh

• When closing a tab with the middle button of the mouse, an adjacent tab reloads sometimes.

  I noticed on my (Ubuntu 10.04 LTS) home and work computers (Windows 7 Home Premium), occasionally when Middle-click to close a tab, the adjacent tab that comes forward is immediately recharged. Computer work from FF 13.0.1, I check what version I have at home more later if necessary, but this is what the latest version provided by Canonical.

  In addition to other on this Firefox cannot be loaded tab in the background if you have never visited the tab session.

  Edition-> Preferences-> general-> uncheck [] do not load the tabs until you choose.

  If this field is selected, and you start Firefox tabs loaded, then each tab will load as view you them.

• Right clicked on a game and click with the right button on the program and selected open with adobe reader.

  When I did this game is not open and all the tutned of program shortcuts to the icon of adobe reader and most can now be opened? Help

  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  Restore the .exe Windows Vista file association, after badly with another application

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  For Windows Vista file association problems

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to set file Associations:

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  How do I... Change file extension associations in Windows Vista?

  See you soon.

  Mick Murphy - Microsoft partner