How to use usb on Dell R710

Similar Questions

• How to use USB CAN 8473, code for the basic example

  Hi all.

  I use NEITHER USB-8473 CAN transmit and receive data via CAN.

  I have traveled a lot a lot of pages related to this and realized that the API will not work for USB - CAN. Can someone tell me please how to use this USB-8473.

  Maybe an exaple program would help me. (It is not PCI it we USB,)

  Thank you.

  You will need to install NI-CAN, if you don't have already done.  This is the API that you can use with a 8473.  After installing, open Explorer Measurement & Automation and make sure that you can see the 8473 under your devices.

  Here is a sample VI (LabVIEW 2009) that I wrote for another developer to make the CAN communication basic tests.  You enter a package CAN as a series of hexadecimal bytes separated by spaces, and it will send it to you.  It displays every CAN packet it receives in the same format.

• How properly using USB 6251 to measure the DC voltage

  Hi all

  I have a problem as in the http://forums.ni.com/ni/board/message?board.id=170&message.id=404676&query.id=250408section.

  I'm sorry for the repetition of the subject, but I read all your advice and have not yet solved the problem.

  My task very simply: I use USB-6251, differential mode to measure battery voltage Energizer 1.5V. But result shows > 10V? Mean.VI shows greater 4V (see attached photo)

  I do not understand what happed with my task?

  Please help me!

  Thank you very much!

  MC

  Hello

  Please post on the Forums OR!

  How do you have your battery connected? Do you use polarization resistors? This could be a grounding problem and can be fixed if the polarization resistors are used. See table 1 in this document , and the differential configuration for a floating source.

• 480 satellite CDT, with Windows 95 osr, how to use USB

  I guess it's impossible, but is there a solution
  thaks

  Hi, look what I found

  "What Microsoft (http://support.microsoft.com/support/kb/articles/Q247/9/69.ASP)" has to say about USB support in Win95 ".

  Excerpt from Microsoft Knowledge Base
  "Windows 95 OSR 2.1 and OSR 2.5 provide base support USB which was developed as the technology first emerged. Based on today's more mature USB technology, there are a number of limitations with USB support in Windows 95 OSR 2.1 and Windows 95 OSR 2.5.

  These limitations have been addressed in Microsoft Windows 98 and carried over to Microsoft Windows 98 Second edition. Addressing these limitations required several architectural changes that are not portable back to Windows 95 OSR 2.1 or Windows 95 OSR 2.5.
  Microsoft recommends that customers who need a more robust USB environment upgrade to Windows 98 or Windows 98 Second edition. »
  Determine if your Version supports USB
  The first thing you need to do to activate the USB in Win95 is to determine which version of the operating system that you use. Please note that the original or the first version of Windows 95, including the update and the version has, is NOT capable of USB connectivity. There is NO updates for these versions of Win95 which can provide USB support. Versions Win95 B & C limited USB functionality. The first operating system of Microsoft to fully support USB is Win98 first edition.

  I also found a link which is very interesting-> http://www.usbman.com/Win95%20USB%20Guide.htm

  Does that answer your question? ;)

• How to use USB with the name of resource VISA?

  Hello

  I am new to LabVIEW and I'm working on a code that must acquire data from a measuring device. This unit has only a USB output, so I have to work with it. As far as know the block that is used to refer to an external port is VISA resource name. I installed a driver that recognizes the serial ports, and they appear in the list of VISA resource file to the front panel. So I thought that installing the DEVICE driver so that the USB ports would appear. I installed and nothing of USB ports. I don't know it's as simple as that, or work with USB ports is a little more difficult. I tried many things and nothing worked I am here.

  PS: I noticed that the version of the driver is 64-bit (my pc is 64-bit) and my LabVIEW version is 32-bit, what could be the problem?

  The device incidentally is Digital Analyzer WT500, Yokogawa.

  Thank you.

  Victor,

  the suggestion driver instruments is to make it easier by using the instrument.

  Normally, you need to install a player from the manufacturer (if it is not installed, the instrument appears as a USB in Device Manager) and the driver NI-VISA. But for some instruments, manufacturers have APIs that uses NI VISA to communicate with your equipment.

  In order to check whether your instrument appears correctly in Device Manager (as indicated by Yokogawa). If this is not the case, check whether Yokogawa has a suitable driver for this tool and install it.

  Is this clear?

  If you wish, you can contact NI Brazil support site or by phone (11) 3149-3149 Ext 3.

• How to use USB 2 on old Satellite 1410-802?

  pcmcia 802-1419 card to increase the speed of the usb 2 will be reconise only of the memory sticks, but tried hard not to increase the power that has no effect. Note book age circa 2002

  Thanks for the comments.

• How to install the graphics card Nvidia Quadro 4000 in Dell R710

  Hi all

  I read a lot about the installation of the Nvidia Quadro PCIe x 16 card in a Dell R710.  I know what parts I need to order (Dell GP347 PCI-e left Riser), but I don't know how to install the power cable 6 pin required by the Nvidia card.  Where would connect it to the motherboard Dell R710?  Is there a place to connect?  If not, is there some type of power provides I can hang the 6-pin power Cable from Nvidia and power the server?  Any help would be appreciated.

  It's a bit old now, but thought I would answer that I had this work and very happy with the performance!

  In addition to editing card, that I needed, there is NO way to provide the power that the card must provide without a power SUPPLY.  There is a really small box listed on Newegg called "ePOWER EP - 450CD 450W ATX12V/EPS12V modular juice dedicated to the area of graphics card and CPU of power".  Buy and run the GPU power cable to an empty PCI slot at the back of the Dell server.

  I also bought some video cards NVidia Quadro 4000 2 GB GDDR5 PCIe for each of my 5.5 ESXi servers. Also, I left my active integrated video graphics card and it is always primary for my hypervisor.

  Download and install the NVidia ESXi drivers on their site and follow the directions to install.  Reset.

  I use sVGA with my Horizon offices and downloaded a trial version of Sketch-Up to test the 3D.  They have a community of users who post 3D renderings and you can download it directly from the Sketch-up program.  Cruise around and check the performance.

  As a side note, I noticed IE worked worse way by using the GPU when browsing the internet.  Go to settings, advanced in Internet Explorer and has the option at the top of the page "use rendering software instead of GPU".  This change makes IE works as expected.

• How to use the adapter USB Y with disk HARD 500 GB V63700-A

  Hello

  My V63700-A500GB external HARD drive is hard to work into my USB2.0 4 port adapter.

  I thought that maybe he needs more power goes into it.
  So I bought a USB - Y, but I can't find out how to use it.

  It has 2 male son of USB connector and a very narrow little that's not in taking wide slim HDD above.

  Anyone who uses these things to advise me how to?

  ... Thank you
  .. .Nick

  Of course you bought the wrong cable.
  I guess you need a USB 3.0 cable similar to [this | http://datalocker.com/wp-content/uploads/2013/09/usb3_cable_white__800px_wartermark.jpg] a

• How to use a USB mouse with 8 Thinkpad?

  Hello!

  I would like to know how to use a USB mouse with 8 Thinkpad. Here in the Brazil, Lenovo does not sell any micro USB USB converters. So, I found on the market several options, but mainly focused for Android tablets and smartphones and not Windows 8.1 devices. He will work with a converter OTG? It supports this type of technology?

  Thank you!!

  You can use any cable USB OTG, it's just the cable and two connectors. I use this Setup with USB keyboard. But it is more convenient to use a Bluetooth wireless mouse.

• How to use the NI USB-6525 digital filtering feature?

  Hi can someone tell me how to use the 'digital filtering' feature of the NI USB-6525 device? How can I set up the device to turn on? Using LabVIEW or NI MAX?

  It is configured using a DAQmx property node:

  

• I am the computer ilitarate, can you tell me how to use a usb flash drive

  I REALLY DON'T KNOW MUCH ABOUT COMPUTERS, YOU CAN ME TELL HOW TO USE THE USB FLASH DRIVE? PLEASE,

  Monday, June 11, 2012 19:56:32 + 0000, maria m.romero wrote:

  I REALLY DON'T KNOW MUCH ABOUT COMPUTERS, YOU CAN ME TELL HOW TO USE THE USB FLASH DRIVE? PLEASE,

  Plug it in and it is almost exactly like any other drive. The
  the only thing that is really different in this regard is that you can easily
  Unplug the unit and plug it into another computer.

  Do you have a? What is its size (GB how?)? Why did you buy it?
  What you do with it?

  Ken Blake, Microsoft MVP

• How to use transfer windows for xp to xp. When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  How to use transfer windows for xp to xp.  When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  Hello, welcome.

  The process is automatic and the maximum transfer rate should be about 20 GB/HR. If the process crashes during that long of a time, it's probably because of something internal rather something you're doing wrong.
  For reference purposes, I included this link. It goes into the details of the migration from XP to Vista (and the basic steps you follow). The instructions are for migrating to Vista via the network, but you can easily follow the steps and choose a different option for your specific installation.
  http://www.windowsnetworking.com/articles_tutorials/migrating-Vista-using-Windows-easy-transfer.html
  For both machines, I recommend you to prepare for the transfer using the following procedure:
  1. click on START > run

  2 type "msconfig" (without the quotes) and press enter

  3. go to the "Startup" tab and uncheck all the entries displayed

  4. click on 'Apply' at the bottom right

  DO NOT RESTART YOUR COMPUTER AGAIN

  5. click on START > run

  6. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.

  7. type chkdsk /r and press enter

  8 allow the system to attempt disassembly of the volume

  9. allow the system to plan restarting

  10. restart your computer

  11 let checkdisk analyze the file system on your hard drive

  12. Once completed, perform the same steps on the other machine

  13. Once completed, repeat the transfer

  
  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to use the recovery on USB media?

  Kindly tell me how to use the recovery on USB media? I deleted the my laptop's recovery partition and I am facing problem to restore previous windows during the upgrade to windows 8.1.

  Hello

  I'm really sorry, I made a mistake and posted the link to your subject (subject) here at the forum.

  The real link for this problem is-> http://support.hp.com/us-en/document/c03489643

  The instructions are the same

• HOW TO USE A USB MODEM 2 PC

  I have a usb modem how I USE MODEM 2 PC (win 7 + win7)

  Hi Arshad,
   
  1. are you using a USB stick modem or is it a USB router?
  2. you are trying to connect the USB modem to two computers at the same time?
   
  I suggest you to refer to the procedure described in the link and check if it helps.
  Using ICS (Internet Connection Sharing)

• Dell Mini 10 1018 Factory Restore - user does not know how to use the Dell utility

  I was running a starter edition of Windows 7 and decided to go with a picture own factory before moving on to Windows 10. My mistake was thinking that recovery Dell utility would work.

  I created a restore 8G USB key using the included Dell utility. I reboot from the USB and restore to factory. He gets the part of the way through and then seems to get confused, re - access scripts folder TAL and stuck in a reboot loop.

  Help!

  Update - Yes, it's a problem to the user. I did not notice the cleaning Sysprep prompt shortly after the resumption. If it is not allowed to run, Sysprep never ends. I have not seen documentation on this, but in my last attempt, I must have selected the appropriate parameters for the cleaning of Sysprep to get off the machine and let Windows finish the installation.

  Mduh9,

  Glad that you solved it all. Eventhough, 10 Windows can install on your computer and load default drivers. Dell has not any Windows 10 drivers for the mini and did not check Windows 10 for this computer. Make sure that you back up your data before installing Windows 10 in case it does not work.