Connect the PC through the bridge to the internet

Similar Questions

• BlackBerry Smartphones my "BOLD" does not connect the internet browser to the home page.

  Everything has been fine until yesterday, but now I can't connect to my google home page. It seems to load incredibly slowly, then nothing happens - no message regarding connection problems or anything like that.

  Everything else works. Emails, applications, Blackberry world, Sky news vids etc etc, but no browser.

  Anyone have any ideas?

  Hi calum_james

  Welcome to the BlackBerry Support Community Forums

  Please try these steps and see if it helps:

  First clear the Cache of your browser: open your browser > press the Menu key > Options > scroll down to clear browsing data (mark all the field) and then click clean now. Once it is perform a battery pull reboot by removing the battery while your unit is powered, wait for a min. then reinsert back. After reboot check your browser if the problem resolves.

  Try it and tell us.

• WRT54G V5 does not connect to the internet.

  I am replacing a WRH54G with a WRT54G.  First of all, I just unplugged and waited 5 minutes. Then I plugged my ethernet cable from the DSL modem into the WRT54G. Then I plugged the DSL modem. I waited for lights stop flashing. Then I plugged the WRT54G and waited for LEDs show the connection. Then I plugged the cord of the WRT54G to computer ethernet. Then I turned on the computer. I was able to access the Interface for the WRT54G, but I wasn't able to connect to the internet. I tried power cycling several times times the modem DSL and the WRT54G. I was unable to access the internet. Finally, I plugged the WRH54G back in and everything worked fine. Any ideas as to why the old WRH54G can connect to the internet and the WRT54G impossible?

  In fact in the statement above this still does not work, but ten minutes ago I understand much of the useful post. Because I wasn't getting IP addresses on my new router, I was wondering if some how they were blocked on my old router. So here's what I did. I had my old router connected. I logged into the old router and under status I clicked on the release of the WAN IP. Then I unplugged the old router. Then I connected the internet cable from the modem to the internet port of my new router and connected first ethernet port on the router to the computer. Then I connected the new modem. When I logged in I saw that the router had caught the required IP addresses. My internet is now up and running and with the QOS feature on my new router I can watch YouTube and be on my google phone VOIP at the same time with the blurring! The key was to know that the problem was that my new router was not grabbing IP addresses. This gave me the idea that they were somehow stuck on my old router. When I published their new new caught router. I know this isn't technically how it works, but it solved the problem. Ball-shaped here were the steps of the solution.

  Verizon DSL DHCP

  1. connect to the old router.

  2. click on status

  3. click on WAN IP release address

  4. disconnect all cords of old router.

  5 connect the cable modem internet in new internet router port.

  6. connect the ethernet cable to port 1 of the modem.

  7. connect ethernet port 1 of the modem in the computer

  8 connect the power cord to the new router.

  After I did these things that the internet was working fine with all my other stuff related to the router. I connected the new router, looked under status and saw other and valid IP addresses. Thanks for the help. I hope that someone that nice find if they still have the same problem. I wonder how the addresses IP got stuck on the old router or rather why I had a WAN IP release on the old router before the new router could get a valid IP address.

• Computer connects to the Internet on all networks, except one

  A few days ago my computer stopped at random to connect to the internet via an Ethernet cable in my apartment.  It works very well, continuously for more than a year.  I first thought the network was down, but to verify ports three separate wall in our apartment (including the one in question) computer of my roommate and his computer connected perfectly.

  My computer can still connect to other networks (different buildings) both via radio and connected via Ethernet, if this isn't a hardware problem.  Currently, we have a wireless router configuration in our apartment that my computer can connect to.  For some reason when I am connected to the network via an Ethernet cable, the computer cannot access the internet.
  When connected, the State jumps back between "Internet access" and "no Internet access.  I tried to ping www.google.com and several other IPs known without success.  Works fine when I go wireless.
  I tried the following, without success:
  Reinstalled drivers for network cards
  Reset the network settings
  Reset Windows sockets
  Enabled IPv4 and IPv6
  Add favorite DNS servers (google and a few others)
  Restart
  System restore
  If anyone has any ideas, I can provide more information, if it helps...
  Thank you

  The problem was somewhat resolved.  When the connection to the Local network has been filled with the wireless network connection, the Internet took over.  I unplugged the router wireless and internet still works, so I'll consider it a success so far.

• Update iPhone 4s to 9.2.1 says: impossible to verify the update you are no longer connected to the internet. but I am connected through wi - fi.

  Update iPhone 4s to 9.2.1 says: impossible to verify the update, you are no longer connected to the internet. But I am connected by wi - fi and I get an email on the phone. My existing operating system is 6.something.

  Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.

  If that doesn't work, try updating through iTunes on your computer.

• Implementation of two R7000 mode bridge (1 connects them 2 the internet and all devices, use 2!)

  Hello

  I have trouble finding my drives NAS via Wifi.

  Since I moved my NAS drives to the location of my second router and connect the first router to the internet and all my mobile devices and laptops, I have problems connecting to my NAS readers. Sometimes it works, but more often, it's not.

  I've implemented the first router as "router mode" and the second router als 'bridge'

  Can I change the configuration, so that my second router is connected to the NAS drives and also works as my router for mobile devices and laptops? Then the first router just to connect to the internet and transfer it via the bridge on the second router.

  I tried this, but it doesn't seem to work...

  Concerning

  Michael

  Just to close this topic: got the solution works by using a set of powerline Netgear. It provides internet access to my router located posting the TV and works perfectly. Wireless AC is not the answer to everything, I realize ;-)

  Thanks for the discussion.

• Can not share the internet connection through Wifi

  Hi all

  I am connected to the internet using an external antenna connected via USB to my mac (WIRELESS n 801.11). I want to share this connection since my mac with other devices, i.e. my iPhone. I use the internet connection through system preferences--> sharing--> sharing internet--> connection on the part of wlan to computers via WIFI and give a name and a password for the wifi settings. When I start the connection icon wifi on the the high watch the arrow menu to the top, but it gives an IP address from 169 auto... etc etc and I can't any traffic to my iPhone.

  I tried to configure IPv4 to use DHCP with a manual (instead of automatic DHCP) address and IP I enter the IP address used in the WiFi, wifi says that it is connected to the name of the internet connection in the shared connection, I opened but once again no traffic to the iPhone. Also tried disabling the firewall, once again nothing.

  I run El Capitan 10.11.2.

  Clues?

  OS X El Capitan: share your Internet connection

• How can I connect to the internet through the dial upward through the computer another internet connection?

  If you want to tell me that MS will not support Windows 2000, please do not post. The computer on which internet Wi - Fi Connection has Windows Vista Home Basic on it. The computer that has WiFi but I want to test its dial-up access windows 2000 top. It has WiFi with utility that is necessary. It includes 12 Opera browser. As a resort last, if it is not possible at all means, ultimately, let me know how to connect to the internet through another computer via the telephone line through Internet connection sharing or network connection. Any help will be greatly appreciated. Remember, this is on the internet. Not on whether or not Microsoft does not support Windows 2000. If you tell me how it is not supported, please do not post. Internet connection will be between the two modems and two computer on Windows 2000, it has a LT Win modem and the Vista Home Basic has a CX110 in generation something like this modem. I ask this question is because my land line will not dial a number. I would like to test a dial, and if you tell me how it's slow, I use DC Unlocker to a broadband speed, so it won't be slow. Any help will be greatly appreciated. Windows 2000 has an Ethernet port.

  Hello

  1. are you referring to Windows Server 2000 or Windows ME?

  If you are referring to Windows Server 2000, please help the professional community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  http://support.Microsoft.com/ph/1131

  If you use Windows ME, visit the below mentioned link.

  http://support.Microsoft.com/kb/234815

• Unable to connect to the internet through guest account

  We cannot connect to the internet using the guest account. I suspect a security update or my mischievous adolescent son changed a setting. This just recentlty that happened (in the past 48 hours) HELPS... I spent over 2 hours trying to get it online. The journal of WMD works very well and I was able to create another account just to see, and it also connects very well. What is the problem and how can I fix it?  Thanks, Biggator

  You do not want to connect to the Internet by using the guest account because it is precarious. In fact, you won't use the guest at all account. The guest account is a special system account, not one for when you feel hospital. For some reason, it is disabled by default in Windows XP, Vista, Windows 7, Linux, Unix and OS X.

  On TechNet:

  "The guest account is intended for users who need temporary access to the system. However, if this account is activated, a security risk may exist because an unauthorized user could have anonymous access to the system through this account. »

  http://TechNet.Microsoft.com/en-us/library/bb418978 (TechNet.10) .aspx

  So if you have enabled comments, turn it off now and create a standard/Limited (Vista, Windows 7, XP Professional/XP Home) for your visitors. Call the new user account to something like "visitor".

  And since you mentioned a teenage son:

  Make sure that the computer is clean:
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  MS - MVP - Elephant Boy computers - don't panic!

• My computer can not VAT registration and access the internet when connected to the network [secure] through wireless.

  Original title: fix problem 'local only' what is wireless.
   
  -My computer is a HP Pavilion dv5, running windows vista edition Home premium

  -My computer can identify and access the internet when connected to the network through a cable.

  -My computer can identify and access the internet when it is connected to the grace wireless network [without warranty].
  -My computer can't identify [unidentified network] and [room only] internet access when it is connected to the [secure] grace wireless network?
  -Other information systems, identify and access the internet when it is connected to the [secure] grace wireless network.
  -J' confirmed the network, try password works in "safe mode with network", manually configured (TCP/IPv4) using a connected computer.
  S ' Please, I'm desperate and in urgent need of help.

  Hello

  1. If it works well before?

  2 have you made any changes to the computer before the show?

  Method 1:

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point:
  http://support.Microsoft.com/kb/928152

  Method 2: Uninstall and reinstall the network adapter drivers.

  Follow the steps mentioned.

  (a) click Start, right click on computer.
  (b) click on properties, click on Device Manager
  (c) expand the network card, right-click the wireless adapter option
  (d) click on uninstall
  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

  Follow the below mentioned article:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Unable to connect to the internet through WRT110

  Hello

  I can't connect to the internet through my WRT110. I am connected directly but my modem at this point shaw. My DHCP settings will not retain an IP address. I'm going to status on the router (192.168.1.1) and find all information, IP address, subnet mask, Gateway etc. Defautlt are set to 0.0.0.0. I click on the intellectual property of release, then renew the ip and that everything remains as 0.0.0.0.

  I tried to set my router to static mode and entering the information in bold to ipconfig below, but which does not either. I also tried to reset the router back to factory default and tried everything on again, without success.

  What I'm doing wrong here?

  IPConfig:

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : vc.shawcable.net
  Link-local IPv6 Address...: fe80::c056:e161:d17f:3 b 09% 11
     IPv4 address...: 70.79.143.236
  ... Subnet mask: 255.255.252.0.
  ... Default gateway. : 70.79.140.1.

  Tunnel adapter ISATAP.VC.shawcable.NET:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : vc.shawcable.net

  Card tunnel Local Area Connection * 11:

  The connection-specific DNS suffix. :
  IPv6 address: 2001:0:4137:9e50:3 c 46:300 d: b9b0:7013
  Link-local IPv6 Address...: d fe80::3c46:300: b9b0:7013% 13
  ... Default gateway. :

  Card adapt 6TO4 tunnel:

  The connection-specific DNS suffix. : vc.shawcable.net
  IPv6 address: 2002:464f:8fec:464f:8fec
  ... Default gateway. : 2002:c058:6301:c058:6301

  Decreed a second IP address of my modem and I could contact my ISP. My router works now after power off.

• Unable to connect to the Internet via AP WAP54G through a BEFSR41 wired router

  I'm puzzled. This connection was working fine but something changed... I don't know how he did. I connect to the internet via a WAP54G through a BEFSR41 to a cable modem. I checked all the settings and even reset several times but nothing helped. I can connect wireless to the WAP54G but no internet connection. The signal strength is excellent. The Vista wireless interface signals that I am connected but only locally with no internet relay. What's wrong? What I forgot. Any help will be greatly appreciated.

  Solved the problem. Seems a sequence to these pair of power and even if I cycled power, I did not properly. Also, I created a new wireless network to ensure that nothing is associated with the former network that has been tampered contributed to the issue.

• WRT54G - cannot connect computer wired to the internet through a router

  I have the WRT54G and unable to connect to the internet when you are going through the router.  I feel that I've checked everywhere can, but still does not work.  I connected the way the instructions, the lights are on the case and all that.  I have cable internet and when I plug directly, there is no problem.  When I try to 'ping' to check the connection between my computer and the router, I get "Request Timed Out".  I tried to reset the router and goes in this direction, but I can't go beyond checking the internet connection through the router.  Any ideas what I'm missing?

  Thank you!

  You should not use the installation CD at all.  If you throw it away.

  See here for the installer of cable.

• How to establish a local router connection through the internet

  How can I establish a local always on connection router through the internet.  I would like to be able to access our local wireless network when you are away from the office.

  Thank you!

  The major goal of a router with internet is to protect the network from attacks through the firewall. The last thing you want to do is reduce this function.

  If you want to access services on specific systems, you can transfer individual ports of these systems. Thus, for example, if one of the internal devices runs a web server you can before port 80 on this device.

  However, if you want to make your PC to appear as if it is on the local network, then that requires the use of a VPN tunnel, which depends on the capability of the router.

• I can connect to the internet through my browser, but cannot connect to an application based on a cloud

  We operate Windows 7 Professional and that you can access the internet via Google Chrome normally.  However, our hotel based on a cloud, RoomKeyPMS, property management system does not connect to our main office desktop (wired LAN connection).  We are able to connect to another computer on desktop (wired LAN connection) and a laptop computer (wireless connection).  All three machines access the internet through the same network.

  Apparently, there is a setting in the office that prohibited RoomKeyPMS to connect to a machine.  Can someone point me in the right direction to solve this problem?

  Hi Glen,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro