How to work with files DPX in Primere Sony Fs700 with Odyssey 7 q pro

Similar Questions

• Is there a good video tutorial for how to work with templates?

  I have created a template for the page that I made using the tutorial called"how to make and style of a sensitive web page. "I found the instructions to open Active and click on modify.  When I do this I get the message: "cannot find the Publisher valid for this file extension."  I went to the help titled creating a Dreamweaver template page https://helpx.adobe.com/dreamweaver/using/creating-dreamweaver-template.html.  It provides two links to video tutorials, but they don't take me to the tutorials.  They're media main page of Adobe, and when I search, no tutorials arrive.  As the instructions on the help pages do not work, I'm stuck.  Is there a good video tutorial for how to work with templates?

  Menus grayed implies that you're working in Live View mode.  You cannot change the models in Live View mode.

  Switch to Design view.  See screenshot.

  

  Nancy O.

• How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to work with this pinhole?

  Usually a paperclip or toothpick or ball pen.

  Stick it in the hole and reset for about 10 seconds until the front led flashes quickly.

  How to reset AirPort Extreme 10.11.6 OS?

  The software method... Unlike the above material method... is to open airport utility and select restore default settings.

  

  Both methods take you to the same place.

  You can also read the manual...

  Reset to a base station AirPort FAQ - Apple Support

• How Siri works with a hotspot wifi phone from ATT without data?

  How Siri works with a hotspot wifi phone from ATT without data? I have the hotspot & it recognizes my iPhone5c, but Siri cannot find a connection when I use it. My phone service is now but only phone at & t imessage. No data, unpaid for the text. It works fine on my home WiFi & works but not the hotspot.

  Siri requires an Internet connection

  It will not work without one

• Suggestions on how to work with Mac Yosemite 10.10.5 the CS4 Design Premium?  Thank you!

  Suggestions on how to work with Mac Yosemite 10.10.5 the CS4 Design Premium?  Thank you!  I hate to have to spend hundreds of dollars to make the work of Design Premium with my new IMac.

  There must be a way to work it.  Thank you!

  
  

• Hello can someone tell me how it works with the muse?

  Can you tell me how the mac (computer screen) is standing and change the image and the text slides

  like on this Web site when you scroll down:

  www. Squarespace.com

  Thanks a lot if anyone knows how this works with Adobe Muse

  Ludmilla

  You should be able to achieve this by using effects of Muse "Scroll." Watch this video of Muse and it should help you get started.

  Jam Muse: Understanding of the effects of scroll - YouTube

• My new work MacBook Air with my WD MyCloud mirror? He is currently working with my old MacBook Pro.

  I'm about to upgrade my MacBook Pro 7.1 (13-inch mid-2010 with OS X EL Capitan), a MacBook Air. I currently use a WD MyCloud mirror for the back upward. I'm afraid that my cloud mirror will not work with my new MacBook Pro? Can you tell me if they will be compatible?

  If you use OS X El Capitan on your MacBook Pro MacBook Air will have the same OS X so I see no reason why he would not compatible. If you connect to it via an ethernet cable from the Pro and you want to do the same thing with Air, you will need to buy a NIC for Air

• Fire fox will it work with my palm treo pro a cell phone based on windows?

  Fire fox will it work with my palm treo pro a cell phone based on windows?

  Mozilla are developing is no longer a version of Firefox for Windows Mobile devices - http://blog.pavlov.net/2010/03/22/stopping-development-for-windows-mobile

• How to work with illustrator files to the draw?

  How can I work with illustrator files in Draw? I can't go to draw for illustrator, but not Illustrator to draw?

  You can not.

  Ight want to put it here:

  Feature request/Bug Report Form

• Satellite U840W - how it works with SSD and HDD drives?

  American,

  I have a U840W which is a beautiful piece of work. He currently heads the Win7.
  It has a hybrid drive system, SSD 32 G and 500G HARD drive. Apparently the 32G acts as a cache.

  I tried to install Linux Mint as a dual boot with Win7.

  Cannot make it work. The installation process (Ubiquity) does not see disks or partitions.
  In a file manager or the GPart-partition manager, I see the HARD drive and all partitions.

  Help me to help the developers of the ubiquity of the problem of access to disks I can get a
  explanation of the way in which the disk system is organized and how it works?

  Any help greatly appreciated, Ian.

  The LINUX community already knows your answer and has led the path to resolve, such as the forum of mint as this thread:

  http://forums.linuxmint.com/viewtopic.php?f=46&t=124299

  Even Microsoft Windows has trouble with setup.exe on disc SSD/HDD hybrid and the Microsoft forums are polluted with their own unverified solutions, some of which are frighteningly superstitious that authoritative to be listed here.

  Ubi, Gnome and KDE are all based on the ability of Grub reliable start the player and so many different distributions don't guarantee reliability.

  I don't have the problem you describe with hybrid hard drives since the installation of 11 Unbuntu.

  Mint is not my first choice with the exception of a bureau of temporary replacement, since the authors are strongly focused on the Office UI, less than the largest army of coders behind Unbuntu and Fedora.

  I'm not criticizing the currency of your choice, but comparing the current Unbuntu boot process could shorten your objective dissection of a startup process of OEM from a manufacturer known for securing lower level specifications.

• How to work with still Images in first items 10

  I am faced with still images in my titles for my video project and would be really grateful for the help. I did a lot of searching on Google on this and searched this forum, but can't seem to find the answer I need, maybe not to seek the right questions or all just "don't get it".  Not even PE Adobe tips or Adobe TV covers, although it seems important to know. I don't understand how PE10 will manage the resolution of graphics from Photoshop or any fixed image. Maybe this topic will also contribute to other institutions.

  I'm working on a video project for my work, editing an old training video. New title graphics created in Photoshop, inserted images of title integrated with video clips, then exported the video segments in the form of MPEG files.  I burned the entire video on DVD.

  When the final DVD play on a computer or a television screen, the images of photo in the titles are unclear, although they were clearly 300 dpi images. (I know dpi is not serious in the video). The text of the title is also a little fuzzy and the text of the title which has applied animation to it is still more unclear. Yet, old video clips MPEG look good - it's just my title images and texts that have (annoying) look bad.

  So I need to know how to improve the quality of the images/graphics even a video?

  Project settings:

  -Hard drive, Standard 48 kHz

  -Editing mode: DV NTSC

  -Frame: 720 x 480 (0.9091)

  -Frame rate: 29.97 FPS

  -with "optimize images" box checked

  Using these settings because I work with an old training video CD MPEG files.

  Exporting files: MPEG, NTSC DVD Standard

  I export as MPEG video clips because they will be burned on a CD or a DVD for distribution to our management offices.

  Job details:

  In Photoshop, I still created graphic images for each title of format 720 x 480 with high resolution photos and logo of the company (300 dpi) and save as a bitmap for import into PE10.  In the timeline panel, I insert the fixed image on the track "Vidéo 1", and then in the video track 2 create a top for the text title (some animated, some still). Sometimes I have the battery 2 or tracks of three titles with separate video text on an image fixed title. Yes, there is a red line on the top in the timeline because I do not still images.

  Issues related to the:

  • What is the best resolution for images imported into PE10 of Photoshop?

  • Do I create title graphics/images to 720 x 480 or higher like 1920 x 1080 report so it will show better seen on a computer or a TV?

  • Do I need to render each image title in the timeline panel so that it displays finally better in MPEG?

  • Is it better to create a title and then insert the image in the title so that they are integrated, rather than layers on separate video tracks?

  I would be very happy to help.

  When the final DVD play on a computer or a television screen, the images of photo in the titles are unclear, although they were clearly 300 dpi images. (I know dpi is not serious in the video). The text of the title is also a little fuzzy and the text of the title which has applied animation to it is still more unclear. Yet, old video clips MPEG look good - it's just my title images and texts that have (annoying) look bad.

  Please keep in mind that DVD-video has been designed for CRT TVs, and was a major step upward to a VHS tape. However, when displayed on a HD or HD TV computer monitor *, it of always ONLY 720 x 480, with is about 1/4 of the resolution 1920 x 1080, which is what we're used to seeing on display devices. It is, but only 25% of the quality. He can never look as good as HD material.

  Good luck and if I missed something, please point out to me.

  Hunt

  * With the advent of BD players and players of DVD up-rezzing, things HAVE improved, watching a video DVD on an HDTV. New players have up-rezzing in chips, which do a very good job of "improving" the quality of the material considered. However, even with these amazing chips, DVD-video is NEVER as good as a full-HD source. In addition, the computers do not have these chips up-rezzing, so when contemplating a video DVD on a high-resolution computer monitor, it will still look pretty bad. There are a couple of new DVD players software, that allow to improve the quality of DVD-Video, played on a high-resolution computer monitor, and some look quite promising. I guess we'll see some more development in the region of DVD-video, especially since BD is not the seller basically promised a lot. Even in 3D is not helping BD fulfilling its promises.

• Windows 8, how to work with the HP printer

  How to fix my printer to work with windows 8 Office Jet 6500 Series #{content removed}

  FPU # CB057 - 64007 Desk Top is HP all-in-one serial No. {content removed} product # is WS323AV #ABA.

  Everything was in July 2010.

  Hello

  You can download the software and drivers from following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=3795314#N313

  You may need to run the second utility first to remove the existing installation.

  Kind regards.

• BlackBerry Smartphones how BIS works with MDaemon

  I had installed mdaemon 11.03, I want to set up BIS on the server, I m new for BIS can any body explain to me how this works...?

  Hi and welcome to the Forums!

  There is no app BIS for you to configure your server. BIS is basically a mail client, access to messaging systems connected to the internet. BIS is hosted to carriers and RIM and functions as the interface between the e-mail services and BlackBerry hand-helds. The end user (the person with the BB) configures BIS with all their email credentials... What BIS then uses to check for the "what's new" email servers, then by pulling from the e-mail server, the "what's new" and pushing for the BB.

  BIS, Setup instructions can be found here:

  • http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB10154

  Good luck!

• How to work with MANY clips when sewing together

  Hello I'm hoping someone can give me your comments or advice on how to do this successfully. I'm working on video projects where I have anywhere from 50-100 video clips to work with. Out of these clips I usually poking out 2 or 3 clips using "Prick the clamps Together" bring down the total number of items in half. Problem is every time I select a few clips and click Ingest, disappears from the window to ingest it. So I have to reopen the window Ingest and expect that all the clips to load every time I want to assemble another series of clips. It is very annoying to do this 20 - 50 times in a row. In addition it is difficult to remember what clips you've already ingested and which you do not have. I brought this up to Adobe several times and they said that they where working on the update to resolve these issues by having possibly Ingest window remain on home page, or a button of the render queue or something that shows what clips have already been ingested. But after waiting so long and the new CC 2015 to date have not addressed these issues, I thought that I would ask everyone if they have a strategy to work with that many clips and their sewing together? Any advice would be helpful, thanks!

  A possible workflow is to simply ingest ALL clips first. Then select the items to assemble, then slide the button new scripted. This will add them to a new scripted where you can then export this possibility as a new asset.  This will give you a visual way to assemble your assets.

  Changing the method by which we ingest / seams is a big effort. We have designs in progress to help improve this workflow, but nothing to share at the moment. We are working on it as quickly as possible. Thank you for your patience.

  Kind regards

  Michael

• How to work with the TextFormat class?

  This code you will get the text into a box, click on submit and have somewhere else than text displayed on the screen. How can I add to the TextFormat class to allow me to format the text that is displayed?
  
  Thank you
  jcarruth

  Hi jcarruth,

  It is quite simple to work with TextFormat. It works somewhat like the
  TextField in that you assign properties to the object, then you
  simply set the format to the text field. Here is a sample using your own
  Code:
  var body_txt:TextField = new TextField();
  var format: TextFormat = new TextFormat();
  var yourName:String;
  body_txt.x = 98;
  body_txt.y = 66;
  format. Color = 0xFF0000;
  format.font = "Arial";
  body_txt. AutoSize = TextFieldAutoSize.LEFT;
  submit_btn.addEventListener (MouseEvent.CLICK, onClick);
  function onClick(event:MouseEvent):void
  {
  addChild (body_txt);
  Yourname = name_txt.text;
  board_txt. Text = yourName;
  body_txt. Text = "Hello" + yourname + «!» Here is your custom table. « ;
  body_txt.setTextFormat (format);
  }

  There are a few different ways to apply a format to a text field. This
  simply passing the applies to the content of the field text directly. Additional
  parameters can be used to apply the format to a part only of the
  text. There is also a method named "setNewTextFormat" which applies the
  format so that the text added after this call.

  Text formats, particularly those who use embedding fonts, can be a bit
  delicate. I have a fairly robust API for ActionScript 2 (almost door
  entirely in AS3) which makes the bite of that kind of stuff. I still have
  to write the documentation and all that kind of stuff, but I can give you
  very specific samples for stuff related to the text if it is to give you a hard time
  using the usual method.

  Kind regards
  Patrick
  BNM

  [email protected] wrote:
  > This code you will get the text into a box, click on submit and have
  > on the display of text. How can I add in the TextFormat
  > class to allow me to format the text that is displayed?
  >
  > Thank you,
  > jcarruth
  >
  > var body_txt:TextField = new TextField();
  > var yourName:String;
  > body_txt.x = 98;
  > body_txt.y = 66;
  > body_txt.autoSize = TextFieldAutoSize.LEFT;
  > submit_btn.addEventListener (MouseEvent.CLICK, onClick);
  > int onClick(event:MouseEvent):void
  > {
  > addChild (body_txt);
  > Yourname = name_txt.text;
  > board_txt.text = yourName.
  > body_txt.text = "Hello" + yourname + «!» Here is your custom table. « ;
  > }
  >