How Upgade Windows 7 Starter to professional using the CD without losing data?

Similar Questions

• How can you convert disks on Windows 7 drives the external without losing data or the system perform?

  How do you write the command for the conversion of FAT32 disk to ntfs without losing data to an external drive in Windows 7 and how you can convert the local drive too?

  How do you write the command for the conversion of FAT32 disk to ntfs without losing data to an external drive in Windows 7 and how you can convert the local drive too?

  Convert a drive to NTFS does not fit.
  http://Windows.Microsoft.com/en-us/Windows-Vista/convert-a-hard-disk-or-partition-to-NTFS-format
  (Vista/Windows 7 - it doesn't matter in this case).
   
  However, pay attention to this:
  "Although the risk of corruption or loss of data during a conversion are minimal, you must back up all data on the partition before you begin."
   
  Because something can and probably will happen.

• Error codes: Code 80070005, I cannot update Windows... I used the Unility FixCleaner but I still get the same error message. How cal I solve this problem?

  Error codes: Code 80070005, I cannot update Windows... I used the Unility FixCleaner but I still get the same error message. How can I fix?

  http://social.technet.Microsoft.com/forums/en/itprovistasetup/thread/95edbee4-a75c-48AD-91D1-5316a96f9567

  http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.windowsupdate&tid=1ab369b4-7d27-4951-8047-09c861ff5bc1&cat=en_US_d02fc761-3f6b-402c-82f6-ba1a8875c1a7&lang=en&cr=&sloc=en-us&m=1&p=1

  See if the information above solves the problem.

  If this is not the case, try the Windows Update Forum, the link below:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I'm under 11 items on Windows 8.  When I use the healing tool, the entire picture moves with the cursor.  How can I fix it?  Thank you!

  I'm under 11 items on Windows 8.  When I use the healing tool, the entire picture moves with the cursor.  How can I fix it?  Thank you!

  Worked like a charm.  Can't thank you enough, R Kelly!

  Ken

• I have a computer that has Windows 2000 Pro, I can use the disk to upgrade to Windows XP with this OS?

  I have a computer that has Windows 2000 Pro, I can use the disk to upgrade to Windows XP with this OS? It's

  an old computer, but it works very well.  I want to switch to XP using the Windows upgrade disc. But

  in the specifications it lists only 98, 98 Second and ME as an operating system you can upgrade.  Thanks John

  Provided the specifications of the computer meets Windows XP you can switch from 2000 to XP. If it does not meet the specifications, you may upgrade the computer first or get a new one which is more cheaper today.

  In addition, please note that you can only switch to Windows XP Professional. If it is a home edition you have then it will not work. You can refer to the link below on how to update your copy of Windows 2000 to Windows XP Pro.

  http://support.Microsoft.com/kb/978307

• How do I cofigure my laptop to use the Virgin mobile mifi wireless card

  Wireless zero configuration

  How do I cofigure my laptop to use the Virgin mobile mifi wireless card

  See the instructions provided with the Virgin card 'wireless mifi mobile.'

  What version of Windows, including service pack that you have (if of course service pack, start > run > winver > OK)

  Your laptop has a wireless adapter?  Look in under 'Network adapters' Device Manager (start > run > devmgmt.msc > OK).

  Look in network connections (start > run > ncpa.cpl > OK).  What icons appear?

• Windows Photo Gallery. How can I change the settings in the Windows Photo Gallery to automatically open the image without going to the index first?

  Windows Photo Gallery.  How can I change the settings in the Windows Photo Gallery to automatically open the image without going to the index first?

  Additional information: there are 2 computers that I use on the first Gallery Photo of Windows will open the image and allow me to use the left and right buttons to scroll through the rest of the photos in the folder, that's what I want.

  On the 2nd computer when I open an image it will open the Windows Photo Gallery in an index with thumbnails of the displayed record.  How can I change so that it opens the same thing as the first computer?

  I did the following on both computers; Right-click on the image and select open with...--> choose the default program--> go--> Program Files, Windows Photo Gallery, but it will be open always differently on computer 2.

  Both computers use Windows Vista 32-bit.

  Thanks in advance.

  Australian salvation,

  This would happen if the file associations are corrupted on the computer, try method to set Photo Gallery Windows as the default program for opening files jpeg or png below image types.

  (a) open default programs by clicking the Start button, click default programs.

  (b) click on associate a type of file or Protocol with a program

  (c) in the following list of file protocol search jpeg and make sure that you have associated with the program that uses it and then check if it works.

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How a Windows error reports tire disorder - specifically the following code which resulted in a Blue Screen of Death?

  The blue screen of death occurred during online communication using a Logitech VID communications program. The following error report translated by:
  -Fault bucket 0x7E_lvrs. ReadWriteThread + 243, type 0
  Event name: BlueScreen
  Answer: no
  Cabin ID: 0

  Signature of the problem:
  P1:
  P2:
  P3:
  P4:
  P5:
  P6:
  P7:
  P8:
  P9:
  P10:

  Attached files:
  C:\Windows\Minidump\Mini013110-01.dmp
  C:\Users\Douglas\AppData\Local\Temp\WER-78015-0.SysData.XML
  C:\Users\Douglas\AppData\Local\Temp\WER7CDD.tmp.version.txt

  These files are available here:
  C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Report0eeec72b
  Online from the best part of twenty minutes before it occurred. The two users of the
  program had the same result. (Blue screen of death) The two of us are running Windows Vista Ultimate Edition on motherboards model Intel D850EMVR with the latest bios update, Intel Pentium IV 3.06 Ghz, 533FSB CPUs, 2 GB of 168 pin memory of Samsung PC800 ECC, ATI AIW 9600XT 256 MB AGP video cards, Sound Blaster Audigy 2ZS with discs Live sound cards, ASB3940 Advansys SCSI adapters , Nakamichi5 disk SCSI MJ - 5.16 drives, Iomega SCSI ZIP 100 drives, and Lite on model SHM-165H6S DVD/CD rewritable EIDE drives. The two systems using model Logitech 9000 Pro webcam. (The two systems are essentially clones) Communication between Memphis, TN and Windsor, ON, CAN.

  Hello

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple ID

  We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple - ID we buy apps and music coming from the same account. It all works very well, but we don t like any other device to RING eveytime a phone rings.

  Thank you so much: D

  ON both phones, check the settings > phone > call on other devices > Off.

• How to remove the trial version of Acrobat DC 30 days that I have somehow on my MacBook Pro?  I don't want the dang thing, and it prevents me from using my Acrobat Pro 11 software.  Trying to access using the tree without end of support for Adobe is reall

  How to remove the trial version of Acrobat DC 30 days that I have somehow on my MacBook Pro?  I don't want the dang thing, and it prevents me from using my Acrobat Pro 11 software.  Trying to access using the tree without end of support for Adobe of really making me cranky.

  Hi thomh65004143,

  You simply drag the Acrobat DC application from the applications folder to the trash to uninstall.

  Then restart your system & install Acrobat XI Download Adobe Acrobat products. Standard, Pro | DC, XI, X.

  Let me know if you are still having a problem.

  Kind regards

  Nicos

• How can I dynamically load swc files using as3? (without relying on the Flash IDE).

  How can I dynamically load swc files using as3? (without relying on the Flash IDE).

  The SWF file can be used in the same way as the CFC, which means that you don't need to "visually show" anything when it is loaded. Your code can use the classes and assets incorporated into the SWF, just as a SWC file. So if someone just to load the SWF file to see what was in it that they see nothing. They could however access programmatically to what anyone on the inside just like you, if they went to that level. But it is not as easy as just racing as SWF to see what is inside.

  I hope that all packaging several separate sovereigns will allow you to load and unload only what you need to keep the RAM usage as low as possible with a minimum load SWF.

  If you are ready, please mark all useful/correct so we can filter without response. You're welcome and good luck!

• Photoshop CS4 - is - does anyone know how to find out if two people use the same file?

  Photoshop CS4 - is - does anyone know how to find out if two people use the same file?

  Yes, I assumed that was the case, and I thought that this link addressed to her.  I would have thought it was more a function of your network and the OS than Photoshop.

• How to use the TRUNC function with dates in the expression builder in OBIEE.

  Hello
  How to use the TRUNC function with dates in the expression builder in OBIEE.
  TRUNC (SYSDATE, 'MM') returns 1 July 2010"where sysdate is July 15, 2010 ' in SQL. I need to use the same in the expression builder in the logical layer mdb column.
  
  
  Thanks in advance

  Use it instead:
  TIMESTAMPADD (SQL_TSI_DAY, (DAYOFMONTH (CURRENT_DATE) *-1) + 1, CURRENT_DATE)

• How to restore my Mac from Yosemite to Mountain Lion without losing all my CS5.5?

  How to restore my Mac from Yosemite to Mountain Lion without losing all my CS5.5?

  reinstall your cs5.5

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC | XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 10, 11, 12, 13. 9,8,7
  • Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• How can I switch phones with a member of the family without losing the data on a phone?

  How can I switch phones with a member of the family without losing the data on a phone?

  jkatts wrote:

  How can I switch phones with a member of the family without losing the data on a phone?

  Make a backup of each phone to iTunes or iCloud (do not forget to use your Apple ID or personal computer), then do whatever your carrier wants do you to change numbers if that's your intention, then restore these backups on the device of the "other."