Delete the perflogs is not harm your computer?

Similar Questions

• the Bank does not recognize your computer

  Approximately a week before, when I log into my bank account, the background would be dim and a window shows indicating that (the Bank) does not recognize my computer and to please fill in the following information such as card number, ATM number, etc..  Of course, I didn't fall for it, but the same problem exists for other accounts such as Amazon, my gas utility account, my credit card accounts, etc...  What kind of virus is it called? And how to remove it, isolate it or quarantine it?

  Thank you

  I95Jim

  PML... It's a tactic that I didn't think to try... again.  Just before, I had a discussion with an expert/technician(at www.supportservices.microsoft.com/support/expert/Waldo).. .He took a while, but he eventually removed the spyware that was causing me grief (TDSSKiller, Norton I think) and he did a few other things... then I tested a variety of accounts several times successfully, the virus disappeared.  But, thank you for your suggestion and keep that account as a possible solution for similar incidents in the future.  Yes, there is a FUTURE...!

  Thank you

  I95Jim

• My says Windows Vista update, phase 3/3, do not turn your computer, that hard thing 24 hours, I can't start menu, I can't go down the screen of Windows Vista update

  I have a laptop, ran a software antivirus and then he says to Windows Vista is to install the updates, phase 1 of 3, then 2/3, then he is stuck on the phase 3/3 for 24 hours, if I turn the computer market and unplug it and try to turn back still evokes the same screen. very frustrated.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  And make sure you only set the CD/DVD drive to be 1st in the boot order to boot from the drive that you have just made

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• PDF warning: How can I disable the "this type of file can harm your computer. Are you sure yo... »

  How can I disable the "this type of file can harm your computer. Are you sure? » ...

  It happens every time I want to move a file to the trash or in my computer... I have "trusted sites" which I get this file type all the time...

  Can it be disabled because I know what I want

  I completed the change by following the instructions. There is no change, BUT I noticed that:

  1. If I download a PDF in Chrome, it goes to my "Downloads" folder If I try to move this to a file or my office, I still get the warning.

  2. If I have "save under" the PDF file to the desktop, it does NOT ask or the warning does not occur.

  Or, I stumbled upon a "Workaround": just save it to the desktop...

  I made the changes to EI and restarted everything. The alert is always there in IE, and Chrome...

  Also, I turned off Microsoft Security Essentials (MSE) protection and and rebooted and its makes no difference.

  I'm confused. I use Chrome 95% of the time.
  IE always control parameter related to this issue, even if I use another browser.

  I returned my IE back to the protected State.

  MSE protection turned on.

  I returned to the 'normal '.

  I think I'll let this one issue at the moment, but thanks for your help.

• For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported

  For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.

  Hello

  1. this problem occurs only with this particular update?

  2 did you change on your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can reset the Windows Update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 2

  You can read the article.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 3

  Step 1:

  Place the computer in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Startand then click run.

  b. type msconfigand click OK.
  The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

  When you are prompted, click restart to restart the computer.

  
  Step 2:

  Download and install the update from the link.

  Update security for Windows XP (KB2719985)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282

  See also:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

• Impossible of is trannsfer to music from the PC to the iphone and he said 'your computer is not permitted', "" you mustauthorize this computer before you download purchases. ""

  Original title: im trying to get my music from PC to iphone and he said 'your computer is not permitted', "' purchases on this computer before you download you mustauthorize." "

  Im trying to get my music from PC to iphone and he said "your computer is not permitted", "you must allow this computer before download purchases." HOW SHOULD I DO THIS!

  Hello

  Thanks for posting your question in the Microsoft Community!

  After going through the description of your problem, it seems that you have a problem with the transfer of music from your computer to the iPhone. I suggest you allow your computer and check the status of the issue.

  iTunes Store: authorisation and exercise.

  http://support.Apple.com/kb/HT1420

  If the question until persists, I suggest you to contact the support of the iPhone.

  Apple - Support - iPhone.

  http://www.Apple.com/support/iPhone/

  Hope this information is useful.

• Close programs to prevent the loss of information. Your computer is low on memory. You save files and close programs. Java (TM) Platform SE binary Windows Media Player

  Hello

  I keep getting the following error message, and leterally having my computer off over and over again, even if I added 1 GB of RAM (now 3 total RAM) mor and also added a 8 GB SD card as more power:

  Close programs to prevent the loss of information.  Your computer is low on memory.  You save files and close programs.  Java (TM) Platform SE binary Windows Media Player

  I did research on the various search engines to know that many face the same problem, with a variety of possible solutions, but so far, none work.  We suggest that I go to Regedit and change the permissions of the user and then delete the old files, after I import them.

  Needless to say, I am just a user and have just a bit of technical knowledge.  The local PC repair shop in my town has no idea what to do.  For anyone who has a solution to this problem, help will be greatly appreciated!

  Randy Kline

  First of all, unless you know EXACTLY what you do and WHY you do it. I personally recommend never do anything in regedit. I consider myself a moderate to advanced computer user and a moderate user of windows. And I always stay away from regedit, if I can, because you can seriously screw things if you don't know what you're doing... Although, to be honest most of the settings will not have a devastating drama.

  It seems to me that this is a memory leak in the program, you will get this error message to make sure that your computer will just crash, because if she is running out of RAM... Well it will crash.

  If you have a 2 and a 1 GB for a total of 3 GB, I recommend the upgrade once more and just round up to a nice 4 (this is the most of memory a 32-bit system can handle in total)

  Works of memory in a way that you see really only a few performance jump with memory dual channel, the only way to have that is really striking the rods of same in each slot.

  There isn't really a reason that this happens every time, except that simply your computer is low on MEMORY, when your computer says this means RAM, not disk memory storage area.

  If you clean your computer of the programs you never use and stop using windows media player (itunes is better in my opinion, even if you don't have an ipod), you can see an improvement, but to really isolate the problem, I recommend simply opening your task manager as soon as you start your computer (ctrl + alt + delete usually gives you the option or it opens directly) otherwise you can do start-> RUN taskmgr.exe , OR type taskmgr.exe in the search box and press on enter.

  Then, look at the column of memory as I said it sounds like a program has a leak, and you will see that is because memory will begin at low/normal and then numbers just keep climbing...

  Also, make sure that your computer recognizes all 3 GB or RAM. in Task Manager if you have access to the performance tab, under physical memory must be a thing called Total, 3 GB = 3074. If this is not an option in your reason, you can go under Accessories/System Tools system information (on the start menu). (may take a while to load) but on the home page, you should see something that indicates the amount of TOTAL PHYSICAL MEMORY. You want to read this / 3GB or 3074 MB.

  Hope this helps some!

  I recommend to remove all programs, you are ready to, especially those that you never use. Do a complete uninstall. Then start installing windows clean (download google) just to make sure that the program has been removed. then go start--> run msconfig OR just type msconfig in the search and click on go (I don't know if you're running XP or Vista/7)

  In the msconfig dialog, you should see a section that says startup. Don't forget to remove programs that you do not first. Disable startup programs, you use every DAY. Don't go turn off all if windows needs some process to run, and some processes don't effect anything. But if you're curious, you should be able to google all of startup items and see what it's related to and why you do or that you don't need.

  Good luck! Sorry, I'm everywhere with this response.

• Need to download adobe but he said «this type of file can harm your computer»

  My daughter wanted to play a game on the internet, but to play it said she had to download Adobe. When she clicked on the "Download" there was a warning: "this type of file can harm your computer" and something about modules and Active X.  Someone would please good enough to explain what it means at all?  It is allowed to download or not?

  It is a general warning to make you think about what you install when asked to install things from the Internet. If you expect to install something, it is generally safe, such as Adobe Flash. Be ever vigilant when on the Internet!

  For your convience, here is the file to install Adobe Flash on your computer: http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe

  When you click on that, save the file to your hard drive, and then close all Internet Explorer Windows. Run the downloaded program to install Adobe Flash.

  When you run Internet Explorer again, it may ask you to allow Flash to run. You can say okay.

• What happens if the master boot record to your computer is damaged?

  What happens if the master boot record to your computer is damaged?

  A. boot sequence would be lost

  B. the operating system would fail to start

  C. a series of long and short beeps will be heard when starting the

  D. the post OFFICE would not launch

  Hello

  True, and in many cases, it can be repaired:

  Try these from a Vista startup disk command prompt - type at the command prompt and press
  ENTER after each.

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /scanos

  Bootrec /rebuildbcd

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and
  starting in Windows Vista problems
  http://support.Microsoft.com/kb/927392

  See this article here - to repair/rebuild using the Bootrec.exe tool Boot configuration data
  http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html

  Sometimes using EasyBCD works when other methods are not.

  Recover the Vista or Windows 7 bootloader from the DVD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+from+the+DVD

  Recovering the Vista Bootloader with EasyBCD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+with+EasyBCD

  Repair the Windows Vista boot loader
  http://NeoSmart.NET/wiki/display/EBCD/repairing+the+Windows+Vista+bootloader

  If that works then run StartUp Repair twice the Vista boot disk, run once then
  Restart and then run again.

  I hope this helps.

• I would like to know if there is any way I can remove the 32-bit and keep the 64-bit without harming my computer

  I ran windows 7 installation on my computer using DVD who had 32 and 64-bit data and for that I currently have 32-bit and 64-bit installed in my computer. So I would like to know if there is any way I can remove the 32 bit and keep the 64 bits without harming my computer or stored data because now both bits is eating space on my C drive/partition!

  OT:

  Windows

  Why do you think you have "32-bit and 64-bit" versions of Windows 7 installed?

  If you installed the 64-bit version (which you will need if your computer has more than 4 GB of RAM and you want to use all of this RAM), you can see a few references to 32-bit architecture.  The 64 bit version of Windows needs these files in order to run software that is designed for 32-bit architecture.

  Perhaps the most obvious instance is the presence of the following two directories:

  C:\Program Files and C:\Program Files (x 86).  It is normal for both of these directories present in a 64-bit system.

  Maybe this will help--> 32-bit and 64-bit Windows: frequently asked questions

• Windows installation was not successful. Your previous version of Windows is being restored. Do not restart your computer during this time.

  Windows installation was not successful. Your previous version of Windows is being restored. Do not restart your computer during this time.     I have a small Toshiba laptop which has installed Windows 7.  I uninstalled my Norton (that I was instructed to do so by a friend); tried to reinstall Windows 8; and got the same message.  Any suggestions?

  Hi Dreah117,

  Thanks for choosing Windows 8!

  I understand that you get this error trying to upgrade to Windows 8. Its good that
  you have removed your anti-virus software are there is a possiblity of it
  causing problems with installation

  I have a few questions about your system

  1. what operating system (OS) you upgrade?
  2 what is a 32 or 64 bit OS?
  3. you try to install a 32-bit or 64-bit of Windows 8?

  You can try these methods to see if it solves the problem

  Method 1:
  Run the upgrade wizard and check to see if your system is compliant with the minimum requuirements.

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  Method 2:
  Disable or uninstall a software such as CD/DVD burning utility or third-party disk utility to defragment programs such as perfect disk / Daemon Tools

  (a) in the notification area, next to the time looking for icons of software disk utility

  (b) pass the mouse over it to check the name

  (c) right-click on the icon and select "Exit/Disable" or a similar option.

  Method 3:
  Make sure your computer is updated through Windows Update.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Update

  Method 4:

  Disconnect all unnecessary external devices such as printers / joysticks etc.

  Method 5:
  Put the computer to boot is a way to solve problems

  http://support.Microsoft.com/kb/929135

  Note: Please follow step 3 on the link if upgradation fails to return your system to a normal startup.

  We know what's going on and if we can be of any other assistance.

• another computer on the network is using the same IP address that your computer uses. Each computer on a network must have a unique IP address. To resolve this problem, run Network Diagnostics

  another computer on the network is using the same IP address that your computer uses.

  Hi johnnyredd

  
  1. is connected to a domain or a server computer?
  2. what operating system is installed on the computer?

   

  You can refer to the link below and check if the information provided will help you-

  http://Windows.Microsoft.com/en-us/Windows7/get-help-with-there-is-an-IP-address-conflict-message

   

  Check out the link below to identify the operating system installed.
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

   

  I hope this helps.

• I get the error "could not complete your request because it is not a valid Photoshop document."

  I get the error "Could not complete your request because it is not a valid Photoshop document" on a file that I was working with happiness last night. I use the last subscription to PShop on Mac. Any ideas. I had a glance through the forum but have not found a specific help. I tried to restart, when you rename the file, copy the file. TIA

  The most common cause is when people save file type, but type the extension to a different file type (like JPEG recording, but typing.) (PSD).  Photoshop will try to obey the file extension, but the extension does not match the contents of the file, so the file cannot be read.

• When I make a video using CC and try to import a piece of music I get the response "could not complete your request because DynamicLink is not available.

  When I do a video using CC and try to import a piece of music I get the response "Could not complete your request because DynamicLink is not available" - any ideas please?

  Could not complete your request because the DynamicLink media server is not available. | Error postal codes of Mylenium

  Mylenium

• CHKDSK deleted the folder but not the content

  Hi guys,.

  Today, win7 found that I had one of my hard drives (not the os disk) to chkdsk, and like a good user, I did exactly that. After restarting, the folder that used to be on this disk had disappeared. The hard drive is a 500 GB WD and the record was about 400 GB of wholesale. I went back to 'My computer' and noticed that the amount of free space was the same that before the folder has been deleted, then the files in the folder should always be there, but I can't access...

  Someone has any idea how to access the files?

  Thanks for your thoughts...

  Hi Mr. Taher,.

  Thank you for your answer, but I have not followed your steps (sorry for that), and I found the missing folder. Apparently, chkdsk finds some flaws in this case and made a new folder on the same drive, witch, I couldn't see (checked hidden files). I ran auslogics on this disc (it took more than 5 hours) and there was a new folder that was not visible. I typed in it and there was this missing folder (he was appointed: found.000 /...), and most of my missing files is back...

  I always find it very strange that a program such as chkdsk can simply modify any folder on any of your drives without even asking, but who I am?

  Once again, thank you for the reply,

  see you soon