How use caching in OSB

Similar Questions

• Apple devices like iPads don't leave caches in the system? Yes or no.  If yes how system caches can be deleted?

  Apple devices like iPads don't leave caches in the system? Yes or no.  If yes how system caches can be deleted?

  Yes.

  IOS or system caches are called "Documents & Data" or D & D for short and 'others '. They can be seen by plugging your iOS device on iTunes - on the Summary tab down there will be bar display accurately. They cannot be deleted. The only way to reset is to do a system restore. A restore will reduce the size of D & D and others, but they will start to grow again. However, applications have caches that can be deleted. Safari for example > you can delete all Cookies and data. For other applications, it depends on the application.

  The system restore. First save your device via iTunes. Also import your photos on your computer and copy all the data if possible. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

  These items also help explain the caches:

  http://osxdaily.com/2013/07/24/remove-other-data-storage-iPhone-iPad/

  http://www.IMore.com/how-find-and-remove-other-files-iPhone-and-iPad

  https://support.Apple.com/en-pH/HT201656

  https://discussions.Apple.com/docs/doc-5142

• How using the menu 'bevel and Emboss?

  

  Hello.

  I want to apply the effect to the rectangle.

  How using the menu 'bevel and Emboss?

  Please tell me JS code or jsx name example.

  Thank you.

  You are looking for PageItem.transparencySettings.bevelAndEmbossSettings:
  http://www.indesignjs.de/extendscriptAPI/indesign11/#TransparencySetting.html

  http://www.indesignjs.de/extendscriptAPI/indesign11/#BevelAndEmbossSetting.html

• Support of cluster consistency created how much cache?

  Hello
  
  I'm runing Oracle coherence GE 3.6.1 clustered.
  
  Support of cluster consistency created how much cache? type of cache is a distributed Cache.
  Cache of overcrowding affects the performance of the pole?
  
  Thank you!

  Hello

  Your test is probably not very representative of a real system. Have you run this test with just a single JVM? In the real world you could run a cluster of a number of Java virtual machines.

  In removeStartWith what you do is iterate over the set of keys to cache and to keep a number of keys - that is going to be fast in a single machine virtual JAVA.
  In removeLike you do a query to filter on the cache and consistency builds a new set to match the keys. It's a lot more work and therefore slower.

  Your two method names are called "removeXXX' althpough, you do not actually remove anything. If you want to delete the corresponding entries or your methods are very effective ways to make the operation you are trying. With a good group, average the most effective to remove all entries that are preceded by a given string would be something like this...

  Filter filter = new LikeFilter(new KeyExtractor(), regex + "%", (char)0, false);
  nc.invokeAll(filter, new ConditionalRemove(AlwaysFilter.INSTANCE));
  

  In the above code, the delete operation will happen on the cluster and will be distributed across all nodes in the cluster at the same time will be faster that bringing so everything they touch back and remove them one at a time as you do.

  In a true cluster works on the cluster where data is usually much more efficient and faster. If you do performance test there is no point in an environment that is not representative of a real-world deployment.

  JK

• How not to use cache for an analysis

  I have an analysis that shows the last date of update of my data warehouse tables.
  because of the data cache, the date seen by users is incorrect.
  
  It is possible to force only this analysis to always read DW data, without the use of the cache?
  
  Thank you
  
  Luke

  In the Advanced tab of the report in the section prefix, type the following command

  Set the variable disable_cache_hit = 1;

  Check the box of the Bypass presentation Server Cache and then save the report.

  Thank you

• How seeds Cache using the Event Table of the poll

  Hello Experts
  
  I have configured the Event Table of the poll in my PC
  Steps to follow:
  (1) table created using SAEPT. Oracle.SQL scheme in 10g
  (2) any SAEPT. Oracle.SQL by creating a new connection pool in the physical layer
  (3) configured in repository - tools - utility - OBI event Polling tables by selecting SAEPT. Oracle.SQL and gave 15 min in the polling frequency
  (4) inserted data in SAEPT. Oracle.SQL
  (5) NQserver.log checked after the time of the poll which is 15 minutes. NQserver.log was not getting updated or details about the event that occurred.
  
  You think that I missed a few steps in the configuration of EFA, if so... Please help me I need to implement on the client machine soon.
  
  Enjoy your time guys.
  
  Published by: Newby on July 1, 2010 10:34

  As much as I know the vote event tables are used to purge the cache automatically. It is not used to start the cache.
  If you want to start the cache, the ibots use or you do like a program...

  Published by: user8000915 on July 1st, 2010 07:37

• How to use the XQuery OSB to do this example?

  Hi all friends:
  My WSDL of Service document is:
  < taij:DownloadBusinessNO xmlns:taij = "http://www.taiji.com.cn/" >
  <!-in option: - >
  < taij:condition >
  <!-in option: - >
  string of < taij:StartDate > < / taij:StartDate >
  <!-in option: - >
  string of < taij:EndDate > < / taij:EndDate >
  <!-in option: - >
  string of < taij:DataType > < / taij:DataType >
  <!-in option: - >
  string of < taij:PaperType > < / taij:PaperType >
  <!-in option: - >
  string of < taij:AcceptOrg > < / taij:AcceptOrg >
  <!-in option: - >
  string of < taij:IsContain > < / taij:IsContain >
  < / taij:condition >
  < / taij:DownloadBusinessNO >
  
  
  
  I want to use the JAVA function legend variable return is StartDate (String type) the text of XQuery
  
  So what should I write the text of the XQuery?
  
  
  Thanks to all the friend (s)!

  Use

  {data ($StartDate)}

• How to prevent the OSB 11g to change original prefixes xmlns?

  Hello

  
  

  Could someone tell me how to prevent the modification of the xml namespace that I have carefully specified in the WSDL and XSD OSB file?

  By example, if I deploy wsdl file beginning with

  <soap:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/"> ...

  Then I get to the BSO for the same wsdl wsdl file is something like

  <WL5G3N0:definitions xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/"/>

  
  

  He renames "SOAP" to "WL5G3N0".  This name change similar to most of the other namespace in the WSDL and XSD files xml prefixes.  This OSB causing to use for a purpose limited in our environment.  We simply turn this renaming feature off (or find different technologies of accommodation... ).

  
  

  So I hope it's possible to disable and someone knows how, in the community of Oracle users.  Could someone tell me if it is possible and how to disable the prefix renaming in OSB?

  
  

  Thank you
  

  or at least there is no known way to get that off, right?

  I'm not an employee of the Oracle, so I can't say with 100% confidence. I don't know a way, and I'm sure that the path does not exist.

  thinking of using 'engine for stateful service' Oracle SOA for this is very bad...

  It's not so bad. If you do not service calls in the Middle, then BPEL is not to dehydrate State, making it more or less stateless.

  DataContractSerializer seems to be picky and all pending schema corresponding to certain prefix text

  It's weird, but the code generators are a common source of bugs in SOA :-)

  Good luck!

  Vlad @ genericparallel.com

• Qosmio X 500-how use Gigabit LAN?

  My gigabit sometimes connection connects to 100Mbit. How to switch up to gigabit or configure it cannects to gigabit?

  My DHCP server is a router 100Mbit, but I connect the Qosmio and 2 other computers and NAS to a GB switch. I did the NAS to connect to Go when he origin connected to 100 Mbps switch ip static and return to DHCP and configure Jumbo mtu. (9 k). office and other laptops have not had a problem with it so far, but I want to be better informed in case the problem is.

  Where can I get more info on all the configuration settings in the property for the gigabit adapter box? I'm sure the amswer is out there somewhere but don't want to turn it off by random changes to the properties.

  Hello

  If you want to use Gigabit LAN, you must first a cable that supports the high speed connection to the local network. As far as I know, it must have at least CAT5e specifications.
  Did you check that?

  Additionally, make sure that this latest LAN driver is installed at Toshiba. Check the driver download page.

  Last but not least, in the properties of the network card in Device Manager, you can choose with speed mode should be used. Here, you must select Gigabit.

• Qosmio G50/402 - how use the 8 GB of RAM?

  I have a Qosmio G50/402 with 8 GB of RAM installed, even if the use is only 4 GB.

  Is it possible to use the 8 GB?

  Hello

  > How to use 8 GB of RAM?

  The fact is that if the 8 GB of RAM are recognized by the BIOS, if you Windows 7 OS recognizes the 8 GB of RAM, and then everything will run automatically
  You need Win 7 64 - bit to use 8 GB that s all you n t need to allow anything else

• How use only one key USB to transfer 'easy' data once it's full.

  I try to do a Windows easy transfer to transfer all my files from my old PC with XP (17 GB) to my new one, which has Vista.  I am using a portable USB drive that can hold 8 GB.  After the first round of copy of the files on the disk, inserting in the new PC and transfer them, I insert the drive in that for the second round, and of course, it is full.

  I don't know how to clear some space on the flash drive.  I can just erase the entire disk, but I do not know what records among MigWiz records that have been created, containing the files I transferred and can now delete.  I was hoping that the Assistant could guide me through this option.

  After that a USB cable, I had did not work, this is my second method of 'transfer '.  It is certainly NOT a process very "easy".  Help, please.

  Hello kimikat, welcome.

  MigWiz will pack all your data migration in a single very compressed file. Therefore, there is no direct way to take the content. My recommendation would be to use MigWiz transfer on all your user settings and then whatever it is like music, pictures or video - transfer on separately.

  Try it and let us know.

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How use my downloaded Vista Ultimate CD to access the password regeneration program?

  I tried to access my computer, but the ID and the password do not work I get a screen for single-user access. Normally I get two. I tried to use my ultimate downloaded CD to repair the problem. I can't. What is the solution?...

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  The Forum above will help you in user account problems.

  You can try this:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• How use formatting HTML on TextArea in Cascades BB10

  I would like to know how to use HTML to format the text to display on a read-only TextArea in Cascades BB10

  Didn't know the answer to http://supportforums.blackberry.com/t5/Cascades-Development/How-to-add-HTML-elements-to-a-TextArea/t... ?

  Stuart

• Access to the Windows 7 domain after setting using cached credentials to connect

  Scenario: A road warrior must first connect using the updated Windows 7 laptop cached domain credentials in order to activate a connection wireless, click VPN access to the network. Some programs do not run, because the user has apparently must be validated on the domain controller. I was just curious about in regards to if there is no interaction between the domain controller and the local computer AFTER a field connection becomes available when a user is connected through the VPN. If so, it would allow a user to run a program or a script after obtaining a connection to domain has been validated and the user would have access to some network resources that are available only to a domain user. Otherwise, the other workarounds are necessary, such as the start feature before opening of session of Cisco. An overview of all of this is very much appreciated.

  Hi David,

  The question you posted would be better suited in the TechNet Forums. I suggest that you post the query in the link.
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Hope this information helps you.

• How use case to set a photo directory?

  Hello guys,.

  I designed 6 colours on the map. I want to use everything in a single report according to the place where the condition.

  I have the following table:

  Number of employe_id

  Employee_name,

  Employee_dept_number

  ________________

  I have 6 departments

  from 1 to 6

  In the report, I want to search a picture according to the employee_dept_number.

  If the employee_dept_number is 1

  the image directory is for example

  c:\orcle\1.bmp

  If 2

  c:\orcle\2.bmp

  ________________________

  So far, I have create a report and I used a binding file. How can I program this file link as follows:

  If dept_number = 1

  then c:\orcle_\1.bmp

  and so on...

  And you know, I'm using oracle developer 6i

  Thank you

  CASE does not work in 6i. But you can use DECODE, as

  DECODE (DEPTNO, 1, ' c:\oracle\picture1.bmp ', 2,'c:\oracle\picture2.bmp',...)