HOW WE CONFIGURE WIRELESS PRINTING BETWEEN MY MACBOOK PRO 2012 AND MY PRINTER HP DESKJET 6988?

Similar Questions

• How to configure the network between the host (Windows 8) and Guest (Linux)

  Hello

  I am trying to configure network between the host (Windows 8) and Guest (Linux). Guest on VMware Workstation 8.

  Using this network, I want to configure putty so that I can access comments linux to a PuTTY that is installed on the host (Windows 8).

  Thank you.

  Abdul

  To obtain external access to comments (access the guest from the host), you must configure the IP static within the guest (Linux) as below and restart the network (service network restart)

  eth0 is a dynamic IP (DHCP) to get wireless internet access

  eth1 is a static IP address

  

  

• My SSD is not appear in the menu on the boot disk (macbook pro 2012)

  Hello world.  So I just got the macbook pro 2012 and starts to do-it-yourself work last night.  I took out the optical drive, transferred the existing location HARD disk (w / caddy) and installed an SSD in its place.  Then I cloned the SSD HARD drive.  No problems so far.

  When I went to change the boot drive startup disk preferences is where I ran into a problem.  My original HARD drive is the only projection.  I had the problem in choosing the boot drive during the reboot (the SSD will appear in this menu) and makes it the default value it.  SSD works very well and is now my main boot drive.  However, I still would like to show in startup disk preferences.  Is it possible to do (preferably without erasing the SSD)?

  Thank you!

  Relevant info - I'm running El Capitan and I used SuperDuper! to clone the HARD disk.

  OK, can I have found the problem.  Map of partition of the SSD has been MBR, no GUID.  I deleted it, reformatted and I am re-cloning it now.  I'll post the result (I hope that as a confirmed for another solution which meets with this).

• Hey Adobe, could I know how to configure the printer setting in Photoshop CS6 on the Lable print.

  Hey Adobe, could I know how to configure the printer setting in Photoshop CS6 on the Lable print.

  Hello

  Are you referring to the labels under brands of printing option when you open the print dialog window?

  If you check this option button, the name of the file you are editing will be printed on the top of the page, as shown below. You can change this label by changing the name of your file (go in file > save the to do)

  

  If you want to learn more about the print marks, take a look at this help document.

  If you try to print actual labels, you will need to use a pre-made template or create your own. Here is a template you can download free Adobe!

  If you have any other questions, feel free to post here again

  See you soon,.

  Kendall

• How is it, I'm starting my MacBook pro and there is no window to enter my password?

  How is it, I'm starting my MacBook pro and there is no window to enter my password?

  Most likely because you have configured automatic log in users and groups.

• Used to properly synchronize my files between my Macbook Pro and iMac.

  Used to properly synchronize my files between my Macbook Pro and iMac. Ive toggled the function of auto-sync, made sure the file names are correctly built, etc.. It is to show the red on all the files on the Pro, but showing the Green controls on the iMac. Any ideas?

  Hello

  We would need to see your files of newspapers of these two machines.

  Newspapers are located in

  Mac:

  The log file can be found here:

  /Users//Library/Application Support/Adobe/CoreSyncSync/CoreSync-YYYY-MM-DD.log

  (where YYYY-MM-DD indicate the date of the last log)

  Note: The user of library users folder is hidden at startup with 10.7 or higher

  See http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html

  Windows:

  The log file can be found here:

  C:\Users\\AppData\Roaming\CoreSync\CoreSync-YYYY-MM-DD.log

  (where YYYY-MM-DD indicate the date of the last log)

  Note: The AppData folder is hidden by default this doc shows how to show if necessary

  http://helpx.Adobe.com/x-productkb/global/show-hidden-files-folders-extensions.html

  Please the zip and send them to [email protected]

  Thank you

  Warner

• How do the initialization of the new hard drive in the macbook pro 2012 model

  I can't the initialization of a new WD hard drive in my macbook pro 2012.

  I installed the new drive and restarted with disk Warrior

  and followed the instructions to press option, command-R.

  When I followed the Protocol to download a new OS, disk utility does not see the newly installed

  HD, what to do?

  < published by host >

  Use disk utility to format drives, no Warrior drive

  How to install OS X on an external drive connected to your Mac - Apple Support

  Drives external Mac OS Extended format before using with Aperture - Apple Support

  http://support.wdc.com/knowledgebase/answer.aspx?ID=1362

• How to remove virus w32.vrbat on Macbook Pro?

  How to remove virus w32.vrbat on Macbook Pro?

  Why you think you have a virus?

  Phony 'technical support' / 'ransomware' popups and web pages

  Effective defenses against software malware and other threats

• I can't transfer file via airdrop between the macbook pro and my iphone 6.

  Hello world

  just bought a new macbook pro 2015 and I can't transfer file via airdrop between the macbook pro and my iphone 6.

  Can someone please help me solve this problem?

  Thank you

  < re-titled by host >

  First check the steps to run the drop:

  Use AirDrop to send the contents of your Mac - Apple Support

  There are some work around to try airdrop work:

  1. Turn off Bluetooth on your Mac.
  2. Delete /Library/Preferences/com.apple.Bluetooth.plist
  3. Re-turn on Bluetooth

  You can find more info here:

  Transfer and AirDrop does not work in El Capitan

  If you do not see all of your device, it means that you are affected by the same problem, I have known, since the upgrade to OS X the air drop of Captain does not work.

• I have a Macbook Pro laptop and Firefox Start Page will automatically load to turn on my computer. How can I disable this?

  I don't want a Start Page for Firefox to load automatically when I turn on my computer. help, I searched gave the suggestion (s) to your desktop go to start menu and run a system configuration to disable Firefox as start - I have a Macbook Pro laptop and have not been able to figure out where I can do the same thing - need help please

  Look in System Preferences > accounts > login items and remove Firefox from this list.

• How to keep the Macbook pro screen and cin on position?

  How to keep the Macbook pro screen and computer in position 'on '.  I don't want the computer shuts down or cut unless I ask him to...

  If you talk to keep your machine to fall asleep, take a look at the caffeine.

• How to clean the virus from my macbook pro

  How to clean the virus from my macbook pro

  What makes you think that you have a? Error message?

• How to optimize the battery in my MacBook Pro?

  Hey,.

  I just bought a new MacBook Pro 2015 13 inches and I love it so far! Mainly, I bought it for use at the University since I am a student in Architecture and I was told that the MacBook Pro are great for this.

  Anyway, as I always take careful care of my business, I want to know how to maximize the battery in my MacBook Pro? Is it true that whenever I have my MacBook Pro connected to the charger and it reaches the max (100%), the charger stops charging? Also, should I turn off or put to sleep when I'm not using it?

  I have read online some tips, but I want to just make sure that all of its clear. I have a lot of questions to be honest, but if someone can give a brief explanation I would really appreciate it!

  Thanks in advance.

  Hi Josetroti:

  When you leave your MacBook Pro is plugged, it stops to load automatically when it reaches 100%. There's no need to unplug it.

  I turn on my Macbook Pro in the morning and left running unless I'm going out for a few hours in this case, I if it turned off.

  In the night I turned off it. I don't use mode 'sleep', as with the SSD climbing boots Macbook very quickly. But that's just my preference.

  I heard that if you leave your computer connected permanently, a once a month, you must let sink to about 30% and then recharge.

  It is not good to let it drop below 10%.

  Here are some tips on using the battery. Batteries for laptops on Mac - Apple Support

• Difference between Macbook Pro 13 "and 15" Exit screen

  Hello

  I know there was a difference between the new Macbook Pro 13 and 15 "video, maps, but is there a difference between their output capabilities? I am wanting to use this machine for Keynote, PowerPoint and video output for large-format projectors, mainly in 1080 p, but want to know if the two can handle higher resolutions. Thank you

  The 13 "and 15" Mbps will support the external resolution up to 3840 x 2160.

  Ciao.

• How to free download of iMovie because MacBook Pro is supposed to be free, but I'm not. pls help

  How to free download of iMovie because MacBook Pro is supposed to be free, but I'm not. pls help

  You can download the latest version of iMovie for free only if you already have iMovie 9 joined to your Apple ID.  It comes free with new Macs to the first owner.

  Geoff.