How to configure the network between the host (Windows 8) and Guest (Linux)

Similar Questions

• HOW SET UP A NETWORK BETWEEN 1 PC WINDOWS 8 AND ANOTHER WINDOWS 7

  I can't one under PC access the files from Windows 7 from the PC Windows 8 and the same in the other direction. Yet the two sons PC listed in the network.

  The parameters of each of the PCs are perhaps misinformed. Thanks to me news of give.

  Fabien

  Ask your question here: -.

  http://answers.Microsoft.com/fr-FR/Windows/Forum/Windows_7-Networking?tab=unanswered&TM=1354976894930

• Error 25011. Unable to configure the host Agent Service, and then if I try to start, shortcut missing serverui.url

  Hello

  I tried to get VMWare Server 2 to settle, (Windows Vista Business, SP1, Internet Information Services running, SQL Server 2005, 2008...

  and everything I try, I get error 25011. Cannot configure the host Agent Service.

  (The old Console server ran very well, only a few months ago, I can not connect with it to remote machines)

  Any suggestions would be welcome!

  Thank you

  Janos

  Hello

  Try:

  1 uninstall WMServer (you can clean the reg file)

  2. stop the IIS services

  3. install VMServer

  4. start IIS if you need it.

  J.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• How to configure the host network to pass

  Hi all

  We do the VLANS on our ESXi hosts and would like to have traffic flows VLAN on our physical network as well.  In doing so, I'm curious of what should be the "correct" configuration for the connection between the physical host and the switch.  You do you enable trunking ports or leave the port with the default configuration?

  Thank you!

  -ToTheCloud

  You do you enable trunking ports or leave the port with the default configuration?

  Assuming that you are talking about Cisco switches, then set up the ports on the switch as junction ports. For other providers, it is named marked ports. In any case, the common name for this is to 802. 1 q (dot1q). Please take a look at http://kb.vmware.com/kb/1004074 for an example of configuration.

  André

  Post edited by: a.p. - corrected link

• How to access the host using winscp and other application?

  Hello everyone,

  I am running Redhat Enterprise (VM) on a Windows 2003 R2 host computer. Now I would like to access the Redhat Enterprise 5 via WinSCP or other Applications. Also, I need the ability to access Applications running on Redhat (access via Web service) system.

  Is this possible?

  Currently I use the http://hostip:8333 / to access the console remotely. That works very well to set up the customer but for testing Applications that run in the virtual machine is not clear to me (I create Applications at the local level and they--are supposed to--communicate with the client VM, REHL). Someone had some advice for me? If you need more information, let me know!

  Thanks in advance.

  If your guest use in network bridge you can access just as you acceding to any other host.

  If it uses NAT you must forward the appropriate ports (22 for ssh and WinSCP for example) at the prompt by editing the NAT configuration file.

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• How to configure the computer to place and receive phone calls?

  I get a modem to the PC and would like to know about Computer Configuration to place and receive phone calls.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions :>

  Hello

  You can make and receive calls using Windows 7, since it is compatible with the hardware and software used by most Internet calls services calling.

  You can use Skype or any other third-party application to make and receive calls on the network. You can also consult the help link and check if it helps.

  Make a phone call over the Internet (VoIP)

  http://Windows.Microsoft.com/en-CA/Windows-Vista/make-a-phone-call-over-the-Internet-VoIP

  (This article also applies to Windows 7)

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• HOW WE CONFIGURE WIRELESS PRINTING BETWEEN MY MACBOOK PRO 2012 AND MY PRINTER HP DESKJET 6988?

  I have a MacBook Pro with Mac OS 10 and a hp Deskjet 6988 printer range. I can print wireless from my MacBook using this printer?  How do I put in place?  I'm new to Mac. If this is not possible, can I set up a HP 6310 or by a hp6540 printer? Thank you, Karen

  Go here and download all manuals and read about how to set up your printer.

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&DLC=en&LC=en&product=3422866&

• Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Hi stuckfree,

  The question you posted would be more appropriate on the TechNet Forums. I would recommend posting your request here.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• Configure the host and the VM on two separate wireless networks

  Hello community, I was a browser for a long time, but this will be my first post.

  I would like to begin by saying that I have always found the answer I was looking for by browsing these forums and that I browsed discussions thereon and consulted the chapters regarding virtual networks in the manual workstation 7.1, but at this stage were still unable to solve my problem.

  The scenario:

  I'm a small business working in a House (upstairs) / hookah lounge (bottom). We recently had a second internet connection (WORK), Internet home of my family (HOME), to provide our customers with a free wi - fi. I would use the connection of WORK (during our hours of downtime) in a Ubuntu VM for folding and seeding of torrents. I want to put this far on a network traffic will not affect the other.

  The network:

  SE host: Windows 7 Pro 64-bit

  (Host) NIC: Intel PRO/Wireless 3945ABG (Mini PCI)

  VM: Ubuntu 10.04 on VMWare Workstation 7.0.0 build-203739

  NIC (VM): Alfa awus036h (USB)

  
  

  The current configuration:

  Network connection is made, the State of replication physical physical network is unchecked.

  The Alfa is connected to the virtual machine and is no longer present on the list of the network adapters in Windows.

  It seems that I have to manually disable the "auto eth 1" interface or the virtual machine using the internet connection in host rather than the network of your choice that the Alfa connects to in VMWorkstation. The speed of the internet with eth auto 1 is connected is quick and consistent, but using it defeats the purpose. Strangely, when I go to network connections, under the "last use" for "eth 1 auto ' it is said 'never '.

  When "eth 1 car" is disconnected, it seems that the virtual machine uses the network wireless connected to the Alfa. But the internet speed is very slow and inconsistent. On downloads, the speed varies considerably; Also, it remains at 0 kb/s for a while before going to 80 KB/s, then works his way down to 0 kb/s again.

  Possible solutions:

  1. it's a driver problem for the Alfa inside the VM environment all this time?

  2 just misunderstood how to set up this kind of virtual network?

  3 is it possible to get the desired configuration by filling the WORK and VMnet0/1/8?

  * Note: Only VMnet1 and VMnet8 appear on the Windows network connections, however isn't VMnet0 bridged one responsible for networking?

  4. upgrade to the current version of the desktop would be useful?

  5. do this problem originally because of some settings on the router?

  * Note: The AP is close enough to provide a signal strength of 85-90%

  Sorry to be so talkative, I just wanted to be as clear as possible because I'm still a beginner to learn more about virtualization.

  Thank you in advance, as always, your help is greatly appreciated.

  First of all, I must say that when I did this last response, I've been on my Mac and I thought the configuration of a host of Windows XP however outside the nomenclature of the names of the host network settings dialog box the rest stands as it is on a host Windows 7 as described below, including a picture as an attachment.

  On a Windows 7 x 64 host with two network adapters, each on a different subnet and VMware Workstation 7.1.3 installed with the editor of virtual computer network configured for VMnet0 and VMnet2 jumpered separately to one of the host of NIC and I have not changed the settings for Windows 7 host NIC-1 and have network/Internet connectivity to the host of this NETWORK adapter as shown in the picture of Google in Internet Explorer on the host computer.  In VMware Workstation 7.1.3 I have a Linux Guest configured to use VMnet2, which is filled in the settings and the Windows 7 host NIC-2 have all with the exception of VMware Bridge Protocol unchecked and have network/Internet connectivity in the guest as indicated by Google in a browser.

  From the perspective of connectivity network between the host and the guest by NIC - 2 on the host computer when all with the exception of VMware Bridge Protocol unchecked there is no connectivity between the two on this subnet because there are no protocol at stake to allow the conversation to take place.

  So theoretically and in practice what I said previously, but didn't were not expressly with a Windows 7 host in mind, nevertheless what I said is true and accurate, as evidenced by world real test/use by what I said and with the image attached herein.

  FWIW Windows 7 has been configured with the default settings and the only changes to the host's network were those made during the installation of VMware Workstation 7.1.3 so with the configuration I discussed with the attached picture, there is no reason why the host and the guest cannot be on different physical networks and each network/Internet connectivity based on the information I have provided and they be isolated from each other by being on separate physical networks.

  That said, even if they can be isolated by being on separate physical networks can still can connectivity between the 2 through VMware shared folders it it turned on and of course & slide and other services so if absolute isolation is necessary to the point where it can be, and the guest still operating system run on a Virtual Machine in the host you would need to disable the Backdoor for VMware Tools cannot provide shared folders on VMware, & glide and other services.  So if you need this isolation level let me know and I will provide additional information to complete it.

• How to configure the network adapter when you run ESXi on VmWare workstation?

  How to configure the network card installing ESXi on VmWare workstation 6.0.0?

  These are the options: I tried bridged, host-only NAP.  None of them works

  

  What Miss me? driver or adapater?

  I'm running on vmware workstation on Windows 7 with Lenovo laptop.

  in the configuration of your virtual machine, the main issue is memory. you gave the 2 GB of RAM, whereas ESXi 6 cannot go forward without minimum 4 GB of RAM.

  If please have 4 GB of RAM and re-run Setup. you will get through.

  message about the network card should also not appear after that. What kind of network you choose depends on your need.

• How to configure the CD driver on the host for a virtual machine?

  After you create a virture machine and put the CD of driver on host, when powered on the vertual machine, may not start the drive form the CD only from NIC.

  How to configure the CD driver on the host for a virtual machine?

  Right-click on the virtual computer and go to edit settings. Click the Options tab and under the tip list, there should be Boot Options. Enter an amount of milliseconds to wait before your boot, so you can activate the CD-ROM. You can also activate the CD even if it boots to the NETWORK card option, and then reset the virtual machine. Get the focus of this virtual machine on the console session, and then press ctrl-alt-insert. Your CD-ROM will stay connected if you do not want to delay the startup process.

• My IP security camera is different my network ip address, how to configure the camera to match the ip address with the router cable time Wörner

  Please someone help me configure my camera IPsecurity model m12 mobotix ag. It allows to work in the corporate network, but they close down and I didn't bring the camera House but there different IP address of my network and I don't know how to configure the camera to have the same IP address with my home router to TWC, thanks

  Router connections by opening network, in the Panel control, search for the router / properties, enter its configuration

  data in the boxes provided, you will get on the router, a sticker shows data. If lost or deleted, go to its Web

  for the data. Also, perhaps the home page of IP camera offers software/drivers.

• How can I share network between the computer laptop windows 7 into a window of 8 tab?

  How can I share network between the computer laptop windows 7 into a window of 8 tab?

  Hi HollyMcColl,

  Thanks for posting your query in the Microsoft Community Forums.

  I understand from the description of the issue you are trying to share the computer network between Windows 7 and Windows 8. I will certainly help you in this regard.

  I appreciate if you could help me with more information.

  -Using Windows 8 Surface RT?

  Note: You can create a Windows RT PC home group, but you can join one.

  I suggest you to consult the help articles and check if it helps.

  A Wi - Fi & networking

  http://Windows.Microsoft.com/en-in/Windows-8/HomeGroup#1TC=T1

  Share files on a home network or your Surface

  http://www.Microsoft.com/surface/en-us/support/storage-files-and-folders/share-files-on-a-home-network?LC=1033

  Share files and folders on a network or shared PC

  http://Windows.Microsoft.com/en-us/Windows-8/share-files-folders

  Get back to us if you need further assistance on Windows 8. We will be happy to help you.

• How to configure the network device agent

  I added a network device (router) in the new platform, its not to go for all of the alerts in tool Hyperic. How to configure the network device to get information to the Hyperic server. Do we need to do any configuration of SNMP.
  
  Can someone help me please.

  Hi Cyndhya,

  Do you mean you want to see traps SNMP generated by your device network at HQ? To do this, you need to configure one of the agent HQ to receive traps and configure the network device to send the trap to the agent. Once this operation is complete, you should be able to add the device network platform (you must use the agent HQ for the monitoring network device connection).

  Here is the step by step guide:
  http://support.Hyperic.com/display/DOCSHQ30/agent+SNMP+trap+receiver

  Koffi

• How to remove the host geniric number?

  How to remove the host geniric number?

  Hi m KUMAR,.
   
  -You receive any host related error message generic?
  -Remember you proceed with recent computer between the calendar changes when things worked fine and now?
   
  Follow the steps in the article below and check if it helps to solve this problem:
  Generic host process error message and a flashlight icon appear
  After return with more information pertaining to the matter for us help to help you better.