How will I know if a program I installed is actually necessary?

addition to Windows media player for flash

As far as I know, there is no codec or add-on for Windows Media Player that will allow him to play Flash files.  It is better to play those in Flash Player, in my opinion.

Tags: Windows

Similar Questions

  • How will I know if some programs are no longer relevant or a more recent program is listed and an older one is no longer needed?

    Original title; Add or remove programs.

    First time I had to look at its content. How will I know if some programs are no longer relevant or a more recent program is listed and an older one is no longer needed? Or when a new program is installed, is deleted predecessor? How do I know what that each prgram of the DOE, so I know if I use it or not?

    Hi Larry,

    Add and remove programs contain the list of applications that you have installed on your computer.

    If you no longer use an application, you can uninstall it from Add or remove programs:

    Add or remove a program overview

    How to change or remove a program in Windows XP?

    You can look at the list of most frequently used programs in the menu start & verify the functionality of each program:

    Overview of the start menu

    Hope the helps of information.

  • How will I know if I have already installed (registered) RDIMMS or DIMM (unregistered) (Mac Pro 2010 mid year Quad)

    I have a Quad core Mac Pro Mid 2010. The article says do not mix of registrants with unsaved. So, how can I know that I have already installed? The system report said just - 1066 MHz DDR3 ECC, nothing else.

    Frank Fitzpatrick

    For the mac Pro 2010, is the question, what SIZE is each DIMM?

    0.5 GB, 1 GB, 2 GB and 4 GB are all unregistered in any case.

    8 GB could go either way - old those who could be saved, is not the ones you bought in recent years.

    16 GB and 32 GB are still recorded.

  • How will I know that correct vmtools is installed?

    I run VMWare 5.0.3 on 10.8.2 (to hold off on 10.8.3 after reading this forum tonite). After that I updated to 5.0.3 said vMachine

    to reinstall the tools? then I tried but nothing has started. So went to short GUIDe how to find < windows.iso > to 5.0.3 update.

    I * think * I followed the guide OK. A splash Panel came and guided me through the process of th, I then closed and restarted.

    Now, under VMachines, he said: "reinstall the tools."

    (1) so what hurts?

    (2) AND how a KNOWLEDGE tools the correct version is installed (if any)

    My Win 7-64 bit OS worked OK it seemed to me.

    Cheers, Jim B

    OS 10.8.2/24 "4 GB/iMac/VMWare 5.0.3 w/W2K, Win7x64, Win8Pre /Xcode 4.6»

    Under menu VM if it says "Reinstall VMware Tools" instead of "update VMware Tools" or "Install VMware Tools", this means that VMware Tools is installed and uptodate.

    To confirm the version of VMware Tools, right-click on the logo of the virtual machine that you get after the notation in Windows in the system tray and choose on the vmware tools.

    If its 9.2.2 its updated version.

  • How will I know if a program must be bypassed through firewalls (SNMP Trap)

    My computer is having trouble, the upgrade from vista to windows 7. the Adviser to implementation level keeps stopping and when it finds solutions, none is found... Im going through my stuff Aureano and firewall and there is something called SNMP trap. What is - this and that I allow to bypass the firewall? In addition, what I do on the Upgrade Advisor?

    Hello

    Method 1:

     

    I suggest you consult the below the article that explains what the SNMP and traps are:

    http://support.Microsoft.com/kb/172879

    Method 2:

    For what is the Upgrade Advisor, if you believe that the firewall is blocking it ended, you can disable it and re-enable once the program is completed.

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  • How will I know when firefox is completely installed?

    I think that I just installed mozilla firefox that I clicked on all the spots he told me, but whenever I click on the firefox icon, it does not.

    See:

    One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

  • How will I know if node manager is installed?

    I recently received a security alert regarding a vulnerability CVE-2010-0073 with node Manager. I don't remember installing this. I fell just the install.cmd when I installed the server. Is their a way to see if it has been installed? Or if this vulnerability does not apply to me?

    By examining the documentation it says also that oracle provides patches for Peoplesoft customers who use WLS92MP3. When I look at my registry.xml file it says

    < output level = 9.2 >
    ServicePackLevel = PatchLevel 0 = 0

    I guess MP3 means Patch level 3? Is this correct? So first of all need to update to patch level 3. Then apply the fix for CVE-2010-0073?

    Thank you
    Andy

    Yes, if it is the version 10.3, it will start by 'Oracle Weblogic Nodemananger... ', previous version start with 'BEA' service... ». It seems that you have not installed it and should be good.

  • How do I know if the program is compatible with my operating system?

    How will I know if a program I want to install is not compatible with my windows operating system

    See the developers website for compatibility with Windows 7 and if there are updates, corrections or difficulties that might ensure compatibility.

    Windows 7 Compatibility Center

    Check if your application software or hardware is on the list

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    Software:

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=software

    You can also try to run the program in compatibility mode

    You can find more information on compatibility modes in the articles below:

    http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question

    The software is designed for an earlier version of Windows such as Windows XP? Most older programs don't work with Windows 7, in particular some programs for Windows XP, can you need to perhaps upgrade to Windows 7 Professional or ultimate edition if you run not an edition and download the Windows XP Mode free program which will allow you run old programs:

    Run in Windows XP Mode requires:

    (1) Windows 7 Professional, Ultimate or Enterprise (not supported in Home Premium).

    Windows XP Mode and Windows Virtual PC

    http://www.Microsoft.com/Windows/Virtual-PC/default.aspx

    Windows XP Mode now accessible to more than PC

    http://windowsteamblog.com/Windows/archive/b/Windows7/archive/2010/03/18/Windows-XP-mode-now-accessible-to-more-PCs.aspx

    Get started with Windows Virtual PC

    http://www.Microsoft.com/Windows/Virtual-PC/get-started.aspx

    http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

    Windows 7 - upgrade Express features:

    http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

  • Currently, I run the design and the Web Premium CS6 on a first generation MacBook Air and want to buy a new MacBook Pro. How will I know if I can install my programs on the new Adobe computer? Because I know that there is some sort of limit.

    Currently, I run the design and the Web Premium CS6 on a first generation MacBook Air and want to buy a new MacBook Pro. How will I know if I can install my programs on the new Adobe computer? Because I know that there is some sort of limit.

    Also, I had to install the software twice on my computer before because I had to restart the computer. I don't know if this affects the limit.

    You are allowed to have two facilities activated, so it shouldn't be a problem with facilities to work on both machines.  If by chance you somehow tied up two activations for a machine you can have Adobe support help solve this cat thrue.

    Serial number and activation support (non - CC) chat

    http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

  • How will I know if there is an extra slot available for my ram in my pc?

    Spoiler (Highlight to read)

     
     

    How will I know if there is an extra slot available for my ram in my pc?

    What kind of PC is it? Usually you can open the hood and look or go into BIOS and watch memory or run a program called CPU - Z to see what is in each slot.

  • How will I know if ChkDsk fixed bad sectors?

    Original title: Chkdsk results

    I ran ChkDsk.  In case the viewer asks Winlogon, it says "4 KB in bad sectors."  How will I know if ChkDsk fixed these bad sectors?  How do you know if there are problems or how whether anything was not fixed?  How will I know if I'd be worried about these results?  The content of the Winlogon is:

    Checking file system on C:
    The type of the file system is NTFS.

    A disk check has been programmed.
    Windows will now check the disk.
    Cleaning of minor inconsistencies on the drive.
    Cleaning of unused 309 entries index $SII of file 0x9.
    Cleaning of unused 309 entries index $SDH of file 0x9.
    Cleaning of 309 unused security descriptors.
    CHKDSK checks Usn Journal...
    Audit of the USN Journal is complete.
    CHKDSK is verifying file data (stage 4 of 5)...
    File data verification completed.
    CHKDSK is verifying free space (step 5 of 5)...
    Free space verification is complete.

    55263599 KB total disk space.

    Thank you
    Heidi

    Windows tries to "fix" or "repair" them, but anyway, the hard drive

    is endangered... Get ready to have more problems, too, even

    have the hd as a 'slave' to another hd (c), the data will get corrupted, and

    worse still, coming just missing. HD replacement is relatively cheap...

  • How will I know if my XP Pro OS has 64 or 32-bit?

    How will I know if my XP Pro OS has 64 or 32-bit?

    Go in the "Start Menu > all programs > Accessories > system tools > Information System" on the section that is displayed by default, it will list in the "System Type" it will list the system as a "x 86" one "x 64" or "x 64", a "x 86" is a 32-bit processor, a "x 64" or "64" is 64-bit Dennis, owner: please do not forget to mark any message (s) who assisted as useful or answer EMAIL ME "" "" "» : STAFF E-MAIL: BUSINESS EMAIL

  • Laptop had a problem to "Solve a problem with PSIKey", solution from Windows & installed according to the instructions. How will I know that the problem is solved?

    has stopped working properly.

    An update is available that solves this problem.

    Downloaded Update site Web Protexis, Inc. and told to follow the steps in the installation wizard. The file downloaded and said he was setting up installation. Then after a few seconds, the box has disappeared and nothing else happened. How will I know if this problem has actually been resolved? My laptop has shown 6 problems with this unit from 30/07/11-08/12/11, where the unit has stopped working. Because I don't know what it is yet, I don't know really if the problem is solved or not. What should I do at this point? I have a SP2 7520-5185, running Vista Home Premium, Acer-Aspire. Thanks for any help you can give.

    Hello

    If you have installed a trial or paid a licensed version of Corel software products, you probably may notice a third unannounced software application makes its way into your computer too. The program is PSIService.exe by Protexis, which installs a Protexis V2 of Licensing Windows operating system service or Protexis licensing service.

    PSIService belongs to protect DRM (digital rights management) copy protection and license management software, which is intended to protect an application or software against piracy and illegal copying. Thus PSI service is normally installed by another program, such as Corel Paint Shop Pro Photo X 2, Corel Paint Shop Pro XI (X 1), Corel Paint Shop Pro X, that uses its service to collect information of license to repatriate much like spyware, protect copy and authenticate the user who is using an authentic version of the program.

    When you tried to download and install the program, if the box that says closed the dialog box when the download is complete has been verified, it will close the dialog box.

    I suggest that you restart the computer and check if you get an error message.

  • How will I know if an alert is really Microsoft

    I get a security alert windows pop up with Windows web security has detected Trojan horses and ready to remove them. Wants me to run install.exe from 89.248.174.95.
    http://89.248.174.95/b_b1f550.php. How will I know if there is a windows genuine message, and if it is safe to download?

    Hello

    That is absolutely false, and Microsoft does not have those type of alerts on issues.

    So if in doubt always come here ask you did this time.

    =======================================

    If you receive messages regularly maybe there is something on your system already that
    should be treated with and more about detection of malicious code in the next message.

    IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

    IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

    Close and restart IE

    not better?

    IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary
    but Java always install and it causes problems - you never update Java go back and disable
    "It is once again.) Search for other possible problems.

    Windows Defender - tools - software explore - look for problems with programs that are not
    look to the right. Allowed are usually OK and "unauthorized" are not always bad. In the case of any doubt
    a program asking about it here.

    Could be a free - BHOremover - BHO - standalone program, needs no installation, download
    and run--all are not bad but some can cause your question (toolbars are BHO).
    http://securityxploded.com/bhoremover.php

    Startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    Also get Malwarebytes - free - use as scanner only.

    http://www.Malwarebytes.org/

    --------------------------------

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search - find top COMMAND - made box an CLICK RIGHT-
    RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at the next startup, then apply OK your way out
    then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • How will I know that I turned on Windows Defender?

    original title: Windows Defender?

    How will I know that I turned on Windows Defender?

    Hello, welcome.

    If please, go to the flag in the task bar and click on it, click Open Action Center, expand the chevron of security, spyware / malware protection-click see installed antispyware programs and you'll see it there. Don't forget that you have an antivirus, I'd say you Microsoft Security Essentials to http://www.microsoft.com/security_essentials/ , just click on this link. Note that if you install MSE, it will turn off Windows Defender by default.

    Kind regards.

    itconcerned

    PS - Give your feedback, please.

Maybe you are looking for