How will I know if I installed everything

Similar Questions

• How will I know whether to install any program in the 64-bit or 32-bit section in Vista?

  original title: where to install?

  How can I know weather to install any program in the 64-bit or 32-bit section?

  Hello DaphneanEpiphany,

  The application that you are installing will sort it out for you. Unless the software is told explicitly 64-bit in the box, you can be assured that the software will be 32-bit.

  If you are running a copy of Windows Vista (or 7) 64-bit operating system will install the software in the right folder so I don't worry about this.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• How will I know what windows install is on my computor?

  I changed my nokia phone, when I installed it that there's a problem with the installation of OVI after this windows Installer keeps asking for a disk that does not exist! Accordingly the windows installer runs all the time slow down my pc upward, nokia have tried allsorts to help without success, its driving me crazy.

  I have tried to uninstall all components of nokia, but impossible to uninstall the nokia drivers. I changed my phone again properly installed the new suite of Nokia, but my pc is still trying to install the OVI platformdisc. Help

  Hello

  Did you do changes on the computer before the show?

  
  Method 1:
  To find out which version of Windows Installer, you have installed on your computer, follow these steps:

  1. click on 'start '.

  2. then click on 'run '.

  3. in the box type "msiexec", and then click OK.

  4. then another box will come to the top and the top of the box of the first line should indicate which version of Windows Installer, you have installed on your PC.

  5. it should look like this "Windows® Installer. V 4.5.6001.22159.

  Method 2:
  You can also check the link provided and check:
  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

  Method 3:
  You can also perform a clean boot and try installing the virtual network adapter and check:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

• Laptop had a problem to "Solve a problem with PSIKey", solution from Windows & installed according to the instructions. How will I know that the problem is solved?

  has stopped working properly.

  An update is available that solves this problem.

  Downloaded Update site Web Protexis, Inc. and told to follow the steps in the installation wizard. The file downloaded and said he was setting up installation. Then after a few seconds, the box has disappeared and nothing else happened. How will I know if this problem has actually been resolved? My laptop has shown 6 problems with this unit from 30/07/11-08/12/11, where the unit has stopped working. Because I don't know what it is yet, I don't know really if the problem is solved or not. What should I do at this point? I have a SP2 7520-5185, running Vista Home Premium, Acer-Aspire. Thanks for any help you can give.

  Hello

  If you have installed a trial or paid a licensed version of Corel software products, you probably may notice a third unannounced software application makes its way into your computer too. The program is PSIService.exe by Protexis, which installs a Protexis V2 of Licensing Windows operating system service or Protexis licensing service.

  PSIService belongs to protect DRM (digital rights management) copy protection and license management software, which is intended to protect an application or software against piracy and illegal copying. Thus PSI service is normally installed by another program, such as Corel Paint Shop Pro Photo X 2, Corel Paint Shop Pro XI (X 1), Corel Paint Shop Pro X, that uses its service to collect information of license to repatriate much like spyware, protect copy and authenticate the user who is using an authentic version of the program.

  When you tried to download and install the program, if the box that says closed the dialog box when the download is complete has been verified, it will close the dialog box.

  I suggest that you restart the computer and check if you get an error message.

• How will I know what patch to install for my OS?

  How will I know what patch to install? It is said that incorrect can harm my system, but there are three options and no indicator of which is necessary for my specific problem.

  Thank you

  Mar9ara

  you mean x 86, x 64 or ia64?

  If you use a 32-bit Windows, version asks the x 86. If you use a x 64 64-bit Windows application version.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• My computer has been infected recently with Sirefef (AB and W variants). How will I know if I do a backup/clean install of the operating system or not?

  As says the question: my computer has been infected recently with Sirefef (AB and W variants).  How will I know if I do a backup/clean install of the operating system or not?

  I'm running a full system scan in ESM right now, and it has detected multiple instances of sirefef.   I have remove as they pop up, but I'm afraid that when I run another scan they all will always be there.  Is there a way to know if MSE is actually remove them and he cleaning?  If not, should I do a back up and reinstall the OS?

  Thank you.  I can choose to try this, however, I would like an answer to my other questions first.

  Sirefef is a rootkit and yes he can hide in your system.  This is why it has been suggested that you may need to reformat/reinstall.  In fact, it's the only way to eliminate malware.  Multiple scans with several scanners and no conclusion malware probably indicate he disappeared, but the key word is "probably".  Malwarebytes is good and what he finds now may be traces of the infection, but what he finds perhaps not active more - it is always good to run the scans so.

  What spare drive did you run?  What scanners did you use?  See again you and follow the guide "Malwaretips"?

  For the firewall problem, you can try the following Microsoft Fixit.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  One of the users of the Forum answers maintains that a great guide on information security is important for understanding the removal of malicious software.  See the following compliments of Brian M - for suggestions on how to solve your problem: http://www.selectrealsecurity.com/malware-removal-guide/#after see: after the removal process and solve the problems of Post disinfection

  Uninstall/reinstall of MSE is how?  All the problems?  Have you tested MSE with eicar to be sure it's working?

  Assume that you have not had an opportunity to review the MSE Installation Checklist or you would have noted that MSE and Windows Defender cannot be used on the same computer.  So if WD works in fact it means MSE has been disabled/not not work correctly or not installed.

  See the next WD re: Windows Defender and Microsoft Security Essentials

  Good luck...

• Currently, I run the design and the Web Premium CS6 on a first generation MacBook Air and want to buy a new MacBook Pro. How will I know if I can install my programs on the new Adobe computer? Because I know that there is some sort of limit.

  Currently, I run the design and the Web Premium CS6 on a first generation MacBook Air and want to buy a new MacBook Pro. How will I know if I can install my programs on the new Adobe computer? Because I know that there is some sort of limit.

  Also, I had to install the software twice on my computer before because I had to restart the computer. I don't know if this affects the limit.

  You are allowed to have two facilities activated, so it shouldn't be a problem with facilities to work on both machines.  If by chance you somehow tied up two activations for a machine you can have Adobe support help solve this cat thrue.

  Serial number and activation support (non - CC) chat

  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• How will I know that my hard drive is when it starts to work by itself?

  I'm going to step away from my computer for a while, maybe just to read for half an hour, and then I noticed that the drive works.  How will I know what he does? I want to really just to ensure that some spyware or something malicious does not on my computer!

  John Gadway

  It is likely that the indexing or defrag or some other service is running. You can use the Task Manager to check. [Press CTRL + SHIFT + ESC as a way to start it.]

  For what is something wicked (you never know with certainty what 'they' might do), make sure that your antivirus software is up-to-date. Install a good as a basis for security from Microsoft (free) or Kapersky (not free). Also run a check by MalwareBytes (free version) or another alternastive good.

  Don't forget, everything simply because you're not paranoid doesn't mean that nobody is trying to "help".

  I'm kidding a bit. All the best.

  Tom Ferguson

• How will I know if a site is secure for transactions by credit card? I don't see any symbol lock.

  I have Windows 7. My old version of windows has always shown a lock when a Web site has been encrypted and secure. I don't see that now. How will I know that it is safe to give personal information such as credit card numbers, on a web page?

  Padlock is therefore more part of Firefox; It has been removed from Firefox 4. The padlock shows that there is a secure connection, but does not provide any additional information. You could make a typographical error, and have always been connected to a secure connection. The lock was replaced in Firefox 3 with the Site identity button. Familiarize yourself with the Site identity button at the left end of the address bar:

  • https://www.Mozilla.com/en-us/Firefox/security/identity/
  • https://support.Mozilla.com/en-us/KB/site+identity+button
  • http://www.dria.org/WordPress/archives/2008/05/06/635/

  You can install this module if you want:

  • https://addons.Mozilla.org/en-us/Firefox/addon/padlock-icon/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• How will I know if my airport extreme in bridge mode?

  How will I know if my airport extreme in bridge mode?  My internet provider suggested I check into that and disable the bridge mode for a problem I've had with wireless help all my IP addresses.

  Assuming that you have a current version or recent Mac OS installed on your Mac...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Extreme

  Click on edit in the window that appears

  Click on the tab at the top of the next page network

  If the router Mode setting = Off (Bridge Mode), then the AirPort Extreme is configured in Bridge mode.

  It's OK for AirPort Extreme setting, unless you want to play with a setting of DHCP and NAT and a network called Double NAT error.  If you do this, AirPort Utility will display a message telling you that the correct setting for the AirPort Extreme is 'off (Bridge Mode).

• How will I know if some programs are no longer relevant or a more recent program is listed and an older one is no longer needed?

  Original title; Add or remove programs.

  First time I had to look at its content. How will I know if some programs are no longer relevant or a more recent program is listed and an older one is no longer needed? Or when a new program is installed, is deleted predecessor? How do I know what that each prgram of the DOE, so I know if I use it or not?

  Hi Larry,

  Add and remove programs contain the list of applications that you have installed on your computer.

  If you no longer use an application, you can uninstall it from Add or remove programs:

  Add or remove a program overview

  How to change or remove a program in Windows XP?

  You can look at the list of most frequently used programs in the menu start & verify the functionality of each program:

  Overview of the start menu

  Hope the helps of information.

• How will I know if I have an administrator password?

  Opera wants to download an upgrade, but it is said that after the upgrade, I should return to Windows by using the administrator password.

  How will I know if I have a password?

  I don't want to be locked.

  Thank you

  You can be read more a warning than is really justified.

  Help us help you.  Please answer the following questions

  1. what version of Windows you have: XP Home, XP Pro, XP Media Center Edition?

  2. what service pack is installed?

  If you do not know the answers to 1 or 2, right-click on desktop and select Properties.

  3. What is the exact message of the opera full text?

  4. click on start > Control Panel > user accounts (if you get to the screen that says 'An icon of control panel', click on accounts of users again).

  You should see this screen--> http://qwertytutorials.com/software_tutorials/windows_xp/site_graphics/user_account_7a.png

  a. is the user account that you use usually say "Computer administrator" or "limited user"?
  b. you see an account named 'Administrator' (probably not)?
  c. If there are all listed accounts that say "Computer administrator", say also "protected by password? If so, you know the password?

• I have a Hp Pavilion Media Center Edition 2002 running. How will I know if I have all the patches and updates, I need? Also is free upgrade to the edition of 2005?

  I have a Hp Pavilion Media Center Edition 2002 running. How will I know if I have all the patches and updates, I need? Also is free upgrade to the edition of 2005?

  Hi Philofduluth and thanks for posting.

  There is not a free upgrade for Media Center 2005. If this is something you would like to do, I contact your OEM manufacturer and ask if there is a software upgrade, they can provide you.

  If you have all the updates that are available for your system go to http://update.microsoft.com . Here, you can see all the latest reviews and optional updates that may be available to you and make install.

  I hope this helps. Let us know if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How will I know if an alert is really Microsoft

  I get a security alert windows pop up with Windows web security has detected Trojan horses and ready to remove them. Wants me to run install.exe from 89.248.174.95.
  http://89.248.174.95/b_b1f550.php. How will I know if there is a windows genuine message, and if it is safe to download?

  Hello

  That is absolutely false, and Microsoft does not have those type of alerts on issues.

  So if in doubt always come here ask you did this time.

  =======================================

  If you receive messages regularly maybe there is something on your system already that
  should be treated with and more about detection of malicious code in the next message.

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary
  but Java always install and it causes problems - you never update Java go back and disable
  "It is once again.) Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that are not
  look to the right. Allowed are usually OK and "unauthorized" are not always bad. In the case of any doubt
  a program asking about it here.

  Could be a free - BHOremover - BHO - standalone program, needs no installation, download
  and run--all are not bad but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search - find top COMMAND - made box an CLICK RIGHT-
  RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at the next startup, then apply OK your way out
  then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How will I know that I turned on Windows Defender?

  original title: Windows Defender?

  How will I know that I turned on Windows Defender?

  Hello, welcome.

  If please, go to the flag in the task bar and click on it, click Open Action Center, expand the chevron of security, spyware / malware protection-click see installed antispyware programs and you'll see it there. Don't forget that you have an antivirus, I'd say you Microsoft Security Essentials to http://www.microsoft.com/security_essentials/ , just click on this link. Note that if you install MSE, it will turn off Windows Defender by default.

  Kind regards.

  itconcerned

  PS - Give your feedback, please.