How write/update the database with my plugin to Export
I noticed some export plugins to modify the database to store data on what the user exported, how can I do this? I'd love to be able to inform the user if the image had previously been E-mail / exported and to whom.
I don't really see anything in the SDK of the feature, everyone can share the light.
Typically this is done using the custom metadata of the LR SDK function.
We check if our backups are valid or not. So it gave me a new server and backups/archives to a 2 TB database I need to restore/recovery. I followed steps below.
(1) copied the prod parameter file to test.
(2) make the necessary changes in the init file.
db_file_name_convert, etc..
(3) start db in nomount mode.
(4) restore the backup control file
Restore controlfile to ' / oraback/ARCH/prod/backup_controlfiles/c-250795000-20141030-01';
(5) mount the database.
(6) created under the rman script and executed.
Run {}
Catalogue start with ' / oraback/RMAN/test "noprompt.
Catalogue start with ' / oraback/ARCH/test "noprompt.
allocate channel C1 device type disk;
allocate channel C2 device type disk;
allocated channel C3 device type disk;
allocate channel C4 device type disk;
allocate channel C5 device type disk;
allocate channel C6 device type disk;
allocate channel C7 device type disk;
allocate channel C8 device type disk;
@rename_datafiles.lst
@rename_logfiles.lst
until the SNA 144390584718.
restore the database;
switch datafile;
recover the database
}
Questions-
-Restore completed successfully, but I found that few archives are missing.
-I pulled from database to recover until cancel using backup controlfile; There is a below error
ORA-01152: 1 no file has been restored from a sufficiently old backup
ORA-01110: data file 1: ' / u02/oradata/testsystem01.dbf'
-Then tried to restore the archive of available backup archive and few of archives have been restored.
i.e. of sequence between 759529 and 759552.
And then I pulled the database until cancel using backup controlfile recovery and I got errors below.
SQL > restore database using backup controlfile until cancel;
ORA-00279: change 144185396330 September at 26/10/2014 to 08:14:01
After you create the database, it is automatically saved with the listener. I am not registered the database with listener then how it registers itself automatically with the listener. How a registry database that is automatically saved.
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on December 29, 2011 16:03:09
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=dog1050) (PORT = 1521))) STATUS of the LISTENER ------------------------ Alias LISTENER Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production Start date December 29, 2011 16:01:07 Uptime 0 days 0 h 2 min 1 sec Draw level off Security ON: OS Local Authentication SNMP OFF Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file The listener log file /U01/app/Oracle/diag/tnslsnr/dog1050/listener/alert/log.XML Summary of endpoints listening... (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=dog1050) (PORT = 1521))) Summary of services... Service 'db11g' has 1 instance (s). "Db11g", State LOAN, has 1 operation for this service... Service 'db11gXDB' has 1 instance (s). "Db11g", State LOAN, has 1 operation for this service... The command completed successfully
Thank you Knani K
> By default, the PMON process stores information about service with his local listening on the local address by default TCP/IP port 1521 >
Please read more http://docs.oracle.com/cd/E11882_01/network.112/e10836/listenercfg.htm#CHDCCHIC.
COUNTRY_ID COUNTRY_CODE COUNTRY_NAME STATE_ID STATE_CODE STATE_NAME CITY_ID CITY_CODE CITY_NAME
IND INDIA TN TAMIL NADU CHN CHENNAI
IND INDIA TN TAMIL NADU TRI TRICHY
IND INDIA TN TAMIL NADU CMT COIMBATORE
IND INDIA TN TAMIL NADU MDU MADURAI
IND INDIA AP ANDHRA PRADESH HYD HYDERABAD
IND INDIA AP ANDHRA PRADESH SEC SECUNDRABAD
AUS AUSTRALIA QLD QUEENSLAND BRI BRISBANE
AUS AUSTRALIA TAS TASMANIA HB HOBART
AUS AUSTRALIA TAS TASMANIA CCE CITY OF CLEARANCE
AUS AUSTRALIA TAS TASMANIA BUR BURNIE
Now, I wanted to update the table such that all ID columns are updated with running number.
Each ID columns should get incremented so that, for Country_ID column corresponding to "India" If country_id is 1, that there must be one for all the lines with the name as "India". Likewise for "Australia".
In the case of State, she also has the same logic with numbers repeated until the very name of the State comes.
For the city, it of course will hold separate ID only because the name of the city will not get duplicated.
This update must be done in the normal way using simple SQL such as no PLSQL don't like looping, etc... is involved.
Here are the contents of the table, and that's how the table should be updated,
COUNTRY_ID COUNTRY_CODE COUNTRY_NAME STATE_ID STATE_CODE STATE_NAME CITY_ID CITY_CODE CITY_NAME
1 IND INDIA 1 TN TAMIL NADU 1 CHN CHENNAI
1 IND INDIA 1 TN TAMIL NADU 2 TRI TRICHY
1 IND INDIA 1 TN TAMIL NADU 3 CMT COIMBATORE
1 IND INDIA 1 TN TAMIL NADU 4 MDU MADURAI
1 IND INDIA 2 AP ANDHRA PRADESH 1 HYD HYDERABAD
1 IND INDIA 2 AP ANDHRA PRADESH 2 SEC SECUNDRABAD
2 AUS AUSTRALIA 1 QLD QUEENSLAND 1 BRI BRISBANE
2 AUS AUSTRALIA 2 TAS TASMANIA 1 HB HOBART
2 AUS AUSTRALIA 2 TAS TASMANIA 2 CCE CITY OF CLEARANCE
2 AUS AUSTRALIA 2 TAS TASMANIA 3 BUR BURNIE
I want to monitor the error log of MYSQL with my Plugin database and want to make the metric display in the user interface to allow users to know what is the content of the error log. I have a big problem to do this. What I do now is line number each time after registration log scanning errors, and the script will use the number to know where the beginning for the next scanning process. The whole process works fine as long as no one click on the metric in "All the metrics" page, which will trigger the execution of my errorlog script followed to get data in real time. Then changed the line number and content between these two line number of error will not be transferred to the WHO. It seems that there is no way to ban users click on the metric. :(
Someone at - it ideas? or experiences?
Any help will be appreciated!
Thank you Satine
The behavior that you saw in the database product seems to be a product of using a USER by scope property in the QueryDescriptor. USER scope indicates that the property value must be specified interactively by the user or by placing it in the collection file.
So, I saw not someone do this, then you have to play with these instructions to operate on right...
Step 1: Put a property with USER scope in the QueryDescriptor of your metric system: uprop
I don't think that you can still use this property. It should be enough that it is configured.
Step 2: In your preferred collection file, in your MetricColl put an ItemProperty to measure the user with some sort of default: foo
What it must do, is to allow normal to continue collections because they will use the value for a property of element in the collection by default file, but it will prevent the real-time collection of the metric given that this value will not be filled.
This property can appear on the page of the metrics and policy settings, so blandly call enough where users think to do anything with it...
Hello gurus, I have a problem with RMAN, I'm trying to 'Cloning' an Oracle Instance with RMAN database and I have several errors, but I checkk all Forums and documentation I have 2 servers in 10.2.1 in Solaris and other in 10.2.4 on Linux And I'm running in my 1Mode of the server as follows: RMAN target connection. connection Assistant sys/manager@TESTDB10_SITE2.world run { allocate auxiliary channels ch1 type disk; the value of newname for datafile 1 to ' / u02/oradata/EVTM/system/system01.dbf'; the value of newname for datafile 2 to ' / u02/oradata/EVTM/system/undotbs01.dbf'; the value of newname for datafile 3 to ' / u02/oradata/EVTM/system/sysaux01.dbf'; the value of newname for datafile 4 to ' / u01/oradata/EVTM/data/users01.dbf'; the value of newname for datafile 5 to ' / u01/oradata/EVTM/data/tbs_tpaper_data_01.dbf'; the value of newname for datafile 6 to ' / u03/oradata/EVTM/index/tbs_tpaper_idx.dbf'; the value of newname for datafile 8 to ' / u01/oradata/EVTM/data/users02.dbf'; the value of newname for datafile 7 to ' / u01/oradata/EVTM/data/perfstat_01.dbf'; the value of newname for datafile 9 to ' / u01/oradata/EVTM/data/tbs_evtm_quest01.dbf'; the value of newname for tempfile 1 to ' / u02/oradata/EVTM/system/temp01.dbf'; duplicate target database to EVTM PFILE = ' / u01/app/oracle/product/10.2/dbs/initEVTM.ora' nofilenamecheck LOGFILE Group 1 ('/ u01/oradata/EVTM/rdo/redo1m1.log',) ' / u01/oradata/EVTM/rdo/redo1m2.log', U01/oradata/EVTM/RDO/redo1m3.log') SIZE the 51200 K,. Group 2 ('/ u01/oradata/EVTM/rdo/redo2m1.log',) ' / u01/oradata/EVTM/rdo/redo2m2.log', U01/oradata/EVTM/RDO/redo2m3.log') SIZE the 51200 K,. Group 3 ('/ u01/oradata/EVTM/rdo/redo3m1.log',) ' / u01/oradata/EVTM/rdo/redo3m2.log', U01/oradata/EVTM/RDO/redo3m3.log') SIZE the 51200 K; }
and I get the error:
channel ch1: reading of the backup/backup/ORA_BACKUP_EVTM/EVTM_291020091029_full_3aksvk4q_1_1 element ORA-19870: error reading backup total/backup/ORA_BACKUP_EVTM/EVTM_291020091029_full_3aksvk4q_1_1 ORA-19505: impossible to identify the file ' / backup/ORA_BACKUP_EVTM/EVTM_291020091029_full_3aksvk4q_1_1. ORA-27037: unable to get file status Linux-x86_64 error: 2: no such file or directory Additional information: 3 switch to the previous backup
output channel: ch1 RMAN-00571: =========================================================== RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =. RMAN-00571: =========================================================== RMAN-03002: failure of Db in dual at 2009-10-29 16:08:29 RMAN-03015: an error has occurred in the script stored memory Script RMAN-06026: some targets not found - abandonment of restoration RMAN-06023: no backup or copy of file 9 found to restore RMAN-06023: no backup or copy of datafile 8 found to restore RMAN-06023: no backup or copy of 7 found to restore
Question? Is it possible to duplicate/clone of Soalris in Linux? :-)))))
Is it possible to duplicate/clone of Soalris in Linux? :-)))))
You can not use the command DUPLICATE between platforms (see duplicate restrictions in the documentation). It is possible to perform a cross-platform via RMAN transport. This process is also explained in the documentation.
Werner
You have an additional complication, patch levels are different. Perhaps datapump here is a better solution - depending on the size of the database.
And I hope that Solaris on x 86-64 (no SPARC), otherwise the next complication.
Hello. I'm very frustrated and I hope you can help!
I have been happily using my SansaClip for about eight months, but then a few weeks ago it stopped working correctly.
When I turn it on, I get the message "Update the database" with a progress bar. She fills in one or two seconds, and then for the regular menu, and looks like normal. However, after listening to my audio book for a minute or two it just turns off.
I tried to do a hard reset, reformatting, reset, and I've updated the firmware to 01.01.30, but no luck.
Now, it behaves even more erratic, for example not immediately turn on, turn off even before I can choose music, etc. The battery bar shows about 75% full.
Any advice?
Thank you.
Lori
Connect the player in MSC mode. (Go to settings > USB Mode > MSCto put the player in MSC mode)
Connect it to the computer.
Then use Windows Explorer to do a Format (right click on the device and select Format)
Next
Unplug the unit and go to the settings menu and select "Format".
This should clean the Clip and make it ready to transfer files again.
Recently, we are improving our test environment with the last group of patches of SOUL with 2 patches huge. now, the requirement is to update the database with the most recent data. I'm quite aware that refreshing db only will affect the fixes we applied. There is no work around for this?
Kai
Kai,
You must apply the patches again after updating the database using "options = nocopyportion, nogenerateportion". In doing so, the part of the database apply only, and the database will be in phase with the application with respect to these two patches.
It becomes important to our business objectives in order to solve the problems within the control elements.
I can't enter the number of line by line in order to uniquely identify it. How can I get that number, so I can send it with xml "update"?
A little nudge in the right direction would be much appreciated.
Aaron.
You must use a field on the form as the one on the line items, NOT the line number that appears in the journal of the line item. If I understand correctly, the LineItemIdentifier can be any field on the form, even the short description. It is best if you know you will use web services to update the line items, you add a (potentially hidden) field to the form and fill that with unique values when positions are created. If you are working with existing elements of line, then you must choose a field that will be usually unique within a single record and hope, you don't have a lot of duplicates.
How to get everyone how to get all the style of paragraphs and their policies of an indesign file and write all the info with info para in a txt file with scriptingstyle and their policies of an indesign file and write all the info with info para in a txt file with scripts
Hello
Try this,
var doc = app.activeDocument,
pstyles = doc.allParagraphStyles,
report = "";
for(var i =0;i
I had to reformat my computer and when you do updates, I can't upgrade to windows service pack 2. The error message says "Service Pack 2 Installation Error-failed to read or write to the database." I tried the solution that I found that told me to stop the cryptographic services, go to the CatRoot32 file and remove the Edbxxxxx.log file but when I open the file there is no log file for me to remove it. I reformatted before and never had this problem. Any help would be appreciated, thanks.
Better to start again from scratch. This time, follow the instructions in this post of mine in another forum (to-the-letter &in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636
Repost: The computer must not be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.
I read a file using a file adapter and write to the database using DBAdapter table. In BPEL, I used activity to receive the entry from the file and call activity to call dbadapter.in between receive and call I used activity activity of transformation of transformation.the problem is that, after deployment it.i get following error two errors:
(1) no recoverable system failure: < bpelFault > < faultType > 0 < / faultType > < bindingFault xmlns = "http://schemas.oracle.com/bpel/extension" > < a name = "summary" part > < summary > Exception is is produced when the link has been invoked. Exception occurred during invocation of the JCA binding: "JCA binding run reference"insert"operations have to: connection problem component binding JCA.". JCA Binding component is unable to create an outgoing connection of JCA (CCI). ReadWriteDB:WriteDB [WriteDB_ptt::insert (MydbCollection)]: The JCA Binding component could not establish an outbound connection of JCA CCI due to the following problem: BINDING. Error of JCA - 12510 JCA adapter localization resources. Unable to locate the adapter of JCA resource through the element of the binding file .jca & lt; factory connections / > The JCA Binding component is unable to startup of the resource adapter specified in the & lt;-factory connections / > element: location = 'EI, DB, null. The reason is most likely that 1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or 2) the "& lt;" jndi name > ' element in weblogic - ra.xml has not been defined in eis/DB/null. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). Please fix this and then relaunch the Application Server, please make sure that the JCA connection factory and dependent connection factories have been set up with a sufficient limit for maximum connections Please also make sure that the physical connection to the EIS server is available and the backend itself accepts connections. ". The called JCA adapter threw an exception of resource. Please review the error message above carefully to determine a resolution. < Summary / > < / part > < part name = "detail" > < details > error location JCA resource adapter. Unable to locate the adapter of JCA resource through the element of the binding file .jca & lt; factory connections / > The JCA Binding component is unable to startup of the resource adapter specified in the & lt;-factory connections / > element: location = 'EI, DB, null. The reason is most likely that 1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or 2) the "& lt;" jndi name > ' element in weblogic - ra.xml has not been defined in eis/DB/null. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). Please fix this and then restart the application server < / details > < / part > < part name = "code" > < code > 12510 < / code > < / piece > < / bindingFault > < / bpelFault >
2 non recoverable system fault): Exception occurred when the link was invoked. Exception occurred during invocation of the JCA binding: "JCA binding run reference"insert"operations have to: connection problem component binding JCA.". JCA Binding component is unable to create an outgoing connection of JCA (CCI). ReadWriteDB:WriteDB [WriteDB_ptt::insert (MydbCollection)]: The JCA Binding component could not establish an outbound connection of JCA CCI due to the following problem: BINDING. Error of JCA - 12510 JCA adapter localization resources. Cannot find the adapter in JCA resources via the element of the binding .jca file <-factory connections / > The JCA Binding component is unable to startup of the resource adapter that is specified in the <-factory connections / > element: location = 'EI, DB, null. The reason is most likely that 1) the resource adapter RAR file has not been deployed successfully to the application server WebLogic or 2) the element '< jndi name >' in weblogic - ra.xml has not been set to eis/DB/null. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). Please fix this and then relaunch the Application Server, please make sure that the JCA connection factory and dependent connection factories have been set up with a sufficient limit for maximum connections Please also make sure that the physical connection to the EIS server is available and the backend itself accepts connections. ". The called JCA adapter threw an exception of resource. Please review the error message above carefully to determine a resolution.
Please suggest how to solve.
Thank you
Tejas
Check your source data and your connection adapter db adpater deployments factory. Check if you have configured all steps of http://docs.oracle.com/cd/E15523_01/integration.1111/e10231/life_cycle.htm#BABBEDBF. Also, in your file .jca in your jdeveloper have named the location of connection-factory as "ist/DB/draw ' if so change it to one that you have created in the db adapter deployments.
Just at the moment where I was getting things straightened on my drive and everything was working fine, I plugged my E280 on my computer and it says "Refresh database" on the player and my computer does not see the E280.
I've been looking around on the forum, and there are so many different options to try (of: delete the SYSTEM folder, which I was told not; to turn off the drive and engaging the hold button and the button to rewind when connecting to the computer, etc., which I tried ~ nothing; take off Firmware and put one on; do something in Recovery Mode) , which I have no idea how do; etc.). Sorry, but I hope you get my point... What do I do?
Thanks for any help once more.
Thank you clu31355. I tried the very first thing that you said ' put in operation and allow it to update the database (if desired) before you connect. "and voila - it worked.
These Sansas seem to be quite ticklish - who knows what will happen?
When you edit a photo, in that it appears a black border that one I find it really increases my photos. As I browse through photos in an album, I want to see with the same black border. I think it improves their and would help me to decide which pho
I'm just this post so that people who own this laptop can go here https://bugs.launchpad.net/ubuntu/+source/linux/+bug/934095 and upvote this bug article so he can get the fixed agenda. I hope in the future to companies like toshiba easily documents
Hello I am writing a program that analyzes the data of a large cluster of entry so it can be written in a format that is more well known to read later. I am trying to find a way to determine if a variant is an array of 1 d or 2D array. I wrote a rout
