Sansa E280 going to update the database when it is connected to the computer

Similar Questions

• I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code.

  I need help to activate my computer but I don't have the code. I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code. I tried to contact the guy but he won't answer. Is it possible to check the activation without the code? I need help and do not want to pay a hundred dollars more.

  Is there a COA sticker that is attached to the machine?

  If so, check to see what edition and version of Windows machine is licensed to:

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  Also:

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• When are you going to update the graphics drivers?

  People who use a laptop too take advantage of hardware acceleration in Firefox 4, you know?
  So please, we cannot get something better than an old graphics dynosaur pilot of 2 years?

  If the driver of Toshiba page isn't an option for you, you can then use a page maker of graphics card drivers. Then you could update the driver in Device Manager.
  Here, you can use the Advanced installation procedure that FORCE Windows OS choose the driver downloaded.

• Sansa e280 v2 dilemma - have the last firmware update

  Here's something I didn't know.  I use the USB - MSC mode and try to sync to the computer - I no longer receive a screen that gives me the possibility of "non-action" with the red circle and line through it.  I used to be able to copy / paste of my C drive on drive E to download music.  Now, I get a screen that gives me the option to open with Explorer, win media, acrobat from adobe, wordpad, etc., which none do let me open the Sansa to copy and paste as I used to do.

  I tried the trick of the hold and touch start up rew button.  The computer recognizes the sansa as drive E and F as a flash drive (even if it is that nothing installed as a reader of F).  Quite confusing.  Most would appreciate some tricks of the trade...

  Tapeworm... it was the auto run after all settings.  Problem solved.  MUCHAS gracias!

• Sansa e280: multiple paths to the devices during the synchronization and no MUSIC file

  Feature: Sandisk Sansa e280 8G

  version: 01.02.24A

  I had a problem with my e280. A month ago, I started getting an error message during playback of my music files. The error says "Syncronize to continue music subscription" I have synced to my computer, nothing helps. Soon ALL my music files were giving me this error message. I went on the Sansa website, where I was directed to download and run the device Sansa Recovery Console. I did as instructed, and now when I join my e280, I get TWO paths of devices (E: / and F: /). I am only able to access one of them (E: /). F: / is noted as removable drive and not going anywhere. When I enter in E: / I can not find my music files. When I remove my camera, he did a restart of automatic system, as soon as the restart was successful, it updates the database for about 10 minutes. I synced the device and my computer prompted me to format the device. I formatted and I still no MUSIC file. The device has been wiped and I thought it would be best to seek professional help until I made the situation worse.

  If there is any other information needed to tell me what it is and, in the worst case scenario, how to find and I'll post it as soon as POSSIBLE. I know it's a lot of problems for a single device, but any help at all would be greatly appreciated!

  Thank you for your time,

  Dibbz

  Unless you are dealing with the Rhapsody subscription service, the error message "sync" is probably due to problems, DRM , Windows Media Player created without your knowledge. It is turned on by default in WMP, & unless you know about it from the start, you can do it yourself untold headaches.

  If you are ripping from CD to the .wma format, uncheck the option 'Copy protect' in the rip settings tab. It's the guy causing the problem. If you do not rip your own CD and downloading these songs instead, they have a DRM encryption. Try a different and/or source format. MP3 files don't have any crippling DRM.

  You must delete the files on the drive and start over with new, best non - DRM. If RIP you to .mp3 format, it won't be a problem, more there are other benefits on the Microsoft/WMP .wma format.

  When connected in MSC mode, your computer will detect your drive as just another flash storage device; actually 2 separate devices. 1 will be your drive (internal memory). In your case, E:. F: received the external memory card slot, if there is a card in it or not. If you have no card in the slot, that's why he 'not going anywhere '. Perfectly natural and nothing bad here.

  The MUSIC folder (and others) are hidden by default. You have to display .

  Formatting will erase all content, so this is only necessary performed as a last resort. It's a PITA to re - load it all so that you do not want to unless it is absolutely necessary. But now that yours is formatted, you can start over w/o of the DRM BS and your problems should go away.

• When you click "Restart now" after Windows Update, the computer stops, does not restart

  When you click "Restart now" to a windows update... the computer cycle throughout the judgment... and not restart.

  * original title - problems with computer restart (ing) after the updates *.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• When windows updates the computer I cnan can't connect you

  When the computer is off, I can not connect on.  If I do the windows restore, I can log on.  It seems that updates prevent me rom logon. If I put the computer in "sleep" or "hibernate" mode, I can log on immediately.

  Hello

  1. what operating system is installed on the computer?

  2. which device is configured to wake the computer?

  Case 1:

  Windows Update problem:

  Step 1:

  After the system restore is complete, you will be asked to reinstall the update of Windows, install the updates one by one and see update is at the origin of the conflict.

  Step 2:
  I suggest to uninstall the updates which is at the origin of the conflict from the computer and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

  Step 3:

  Once you uninstall the updates, go to this link, download updates and try to install it manually and check, type the number in the search box and press ENTER:

  http://www.Microsoft.com/download/en/Windows-7.aspx?q=Windows%207&FS=applicableproducts ~ percent 255eWindows % 3bapplicableproducts ~ 255th % 2522Windows % 252fWindows % 25207% 2522

  Case 2:

  Standby or standby mode extended question:

  The problems of wake the computer from sleep mode

  http://support.Microsoft.com/kb/266283

  Let us know if it helps!

• Sansa e280 not recognized by the pc

  Hi all! I'm new here and I recently had a problem with my sansa 280. I know that for my sansa display in the pc I need to put it on the usb mtp mode. But when I put it on the pc, it does not recognize my computer and he says: "usb malfunctioned or not recognized by the pc. When my sandisk is out of the computer works perfectly. How can I get my computer to recognize the sandisk card? I want to put more music on this subject, and I can't! I use windows vista. Please help me, I would appreciate your help a lot!

  I had your exact the same problem. You can read in the thread I started. I pasted the answer that worked for me here.

  c1u31355

  Download Windows Media Player 10 or 11 from www.microsoft.com and reinstall it. This usually fixes things. Next step, but only if this does not work, is to get the "MTP Porting Kit" from Microsoft and install it.

  Let us know if those who help or not.

• My computer starts and I get the Windows startup screen, then my screen goes black and the computer is frozen I guess. Stopping and restarting do not work.

  I get to the black screen with the Windows XP logo and the bar of the State, and instead of my forthcoming accounts page, the screen goes black and nothing else happens. I tried the power off to reset and restart, and I can't perform a recovery of the system with the CD.

  Hi cgrosenick,

  -What software changes you did on the computer before the show?

  Follow these steps:

  Method 1:

  Start your computer in last known good configuration mode.

  For instructions, see How to start your computer by using the last good Configuration in Windows XP functionality

   

  Method 2:

   

  Follow the steps in this article:

  Computer stops responding with a black screen when you start Windows XP

• Have now uninstalled 43 updates, the computer was not install them for at least a month. Also error code 0 x 643 on an update Please HELP...

  This problem is driving me crazy, go round in circles, trying to use microsoft update to help. No help for the moment... Error 0x8009310B code is on the rest the updates failed.

  mentioned, check if it helps.

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".

  http://support.Microsoft.com/kb/923100 MissCats Hi,

  1. Do you have the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  I suggest that reset you the default Windows Update components and later try to install updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Also check out the article below and try the steps

  Method 2

  If the previous step fails, then I suggest you temporary disable the security software installed on the computer and install 5 updates at a time, to check if it helps.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• my screen goes black, but the computer remains on... just before it turns black it made a thud

  I have windows xp. I got a virus... it has to be cleaned... once I came back... I starts it up... everything is fine... then 2 to 3 minutes more later when I try to connect to internet explore the computer noise is loud and the screen goes black. I have to turn it back on by pressing the set button = re... then it starts again.

  Hello

  This only happens when you attempt to use internet explore?

  Step 1: Check if the problem persists in the clean boot state.
  Reference: http://support.microsoft.com/kb/310353

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
  Reference: http://support.microsoft.com/kb/308427

  I hope this helps.

• McAfee antivirus updates the computer preventing it from closing

  McAfee Antivirus is installed on my Windows XP computer.  Every time I go to shut down my computer that McAfee updates the window rises and must first be downloaded. It's OK, except that updates download ever and that my machine restarts without the updates being loaded.  What should I do? Manually cut the machine?

  You must contact McAfee technical support.

• speakers work, but not when they are connected to my computer

  No sound from speakers.  they work when we tested on a radio.  they came with the computer

  No sound from speakers.  they work when we tested on a radio.  they came with the computer

• My camera blackBerry smartphones did not when it is connected to my computer

  I had used my computer from time to time to charge my blackberry, this morning, I unplugged and tried to turn it on with no luck. The drums out and I tried again without a bit of luck. Put it on the charger and the battery with a slash symbol showed on the screen. Any ideas on what's happened.

  stltrains wrote:
  Any ideas on what's happened.

  The battery is dead. Free of charge.

  Leave the appliance to charge 2-3 hours and then, always toujours relie connected to the USB cable, remove the battery from the camera a few seconds and plug it back. If it starts - let - the charges to 100% (check the Options > status for the percentage).

  If it does not start - try using a wall charger if you're not. If you are connected via USB to the computer, make sure that you have Desktop Manager (or USB device drivers), you can download it below.

  Make sure that your USB cable is connected to one of the main rear USB ports of the PC. A USB hub, or USB Monitor port not a USB port on the front of the PC.

  Here's some good advice from loading, please read and you will see that many of them will be applicable to you.
  http://www.blackberrynews.com/2008/05/20/battery-use-tips-for-your-maximum-battery-life/

• Message: "check Internet connection" when attempted to update the computer

  Original title: could not update my computer

  try to update computer all I get is a screen saying, check the internet but internet connect is fine ran for the elimination of the virus mcaffe ran all detergents that I always found out options please help!

  Hi drichardson84,

  1. do you get an error with the message code?
  2. don't you make changes before this problem?

  Check out this article and follow the steps successfully.
  See You can encounter errors related to the connection of temporary when you use Windows Update

  Visit our Microsoft answers feedback Forum and let us know what you think.