How XPoweredByHeaderLevel the value None using wlst

Similar Questions

• How to the value of the factor of reset when you reset the system.

  Hello

  I am facing a problem regarding to reset the value of the attached VI factor.

  I used 4 button Start, okay, save, stop.

  In what initially vi application set the value of the factor, then press start and reading will vary and then press OK, then reading is added to the matrix table.
  Second reading again press start and measure reading and then click OK to add to the table.

  After some reading when I press the button Save sound save any reading of txt file and reset all the vi but its not able to reset the value of the factor.

  How can I reset the value of the factor also after pressing the button Save.

  I know his side out of the whileloop here then it is not possible to reset in this case, I tried to put it in the while loop, but I have no success.

  Please guide me.

  Thank you very much.

  Oh, sorry about that... it was out of my mind...

  Thank you.

• The value FPS using NOR-IMAQ with a GigE camera programmatically?

  Hi all

  I'm (slowly) learning how LabVIEW plays well with the cameras, GigE, that I just bought.

  At this point, I'm trying to understand how to programmatically set the value of fps for the camera.  I have been using the examples NOR-IMAQdx to control the cameras so far, but I am open to trying anything.  Someone at - it a good example of how I can change the frame rate "on the fly?

  My next task will be to find a way to change the size of the image on the screen programmatically, so if anyone has any ideas for me on this path there, I'd be pleased them too well.

  Thank you very much

  FB

  I thought about it:

  1. use the vi IMAQdx open camera to open the camera

  2 use the "List attributes" in the palette of NOR-IMAQdx to see all available attributes

  3 using the step 2, above, I could find the attribute, the attribute "AcquisitionFrameRateAbs".

  4. create a node in the output of the open unit VI property, choose 'Attributes of the camera,' select "Attribute Active."

  5. set the property node "change all to write."

  6. connect a constant string of 'AcquisitionFrameRateAbs' attributeinto the property node value

  7. create another node in property 'Attributes of the camera', this time by selecting 'Value' and affecting the type DBL

  8. change all to write

  9 create a digital control for cadence

  10. connect the digital control to the property node 'ValueDBL '.

  Presto!  You are finished.

• Resize the value None, but everything is still evolving

  Very well. Test the new features...

  I have a master page with several breakpoints. There is a menu on the page and some pictures logo. The value of resizing for images is set to none. For the menu, the value of resizing is grayed out so I can't set a value for this. When I opened the page in a browser and resize the browser everything evolves at break points.

  You van see the example here.

  Home

  Yes. Although I'm not sure what most important what or how I solved it... It was in the early stages of the new version then this is probably something that I did wrong...

• How set the value of a LOV in CO prgramatically and get the Pkey value?

  Hello
  
  I need to get the Primaykey LOV will return and set a value for a LOV, say ItemLOV in a page through CO. How can I achieve this?
  
  Req:
  1. set the nom_element, say "DELL_1618" so that the page displays this in the LOV.
  2 get the PK value returned by LOV in the backend in an attribute of VO say Item_ID, ' 100009881'.
  
  Thank you
  Sicard.

  Hi Santosh,

  Sorry, I responded to general LOV scenario, but want to put it right,

  You need run your LOV query to the controller for the "DELL_1618" element using the prepared command, get the value of the value display and Id and assign the LOV and FormVlaue in the PR of the controller.

  Kind regards
  Out Sharma

• How do the value in a selection list to a text field without submit?

  Hi all
  
  I have a Select list that looks like:
  Select short_name | ' - ' || country d
  SHORT_NAME r
  of mo.eu_country
  order by 1
  
  Then I have a text field (persons with reduced mobility, saved state).
  
  What I want to do: when a country is selected in the list-> set the value of text field with the short name of the country from the selection list (short_name r).
  
  
  Anyone know how I can get this done? (should I use AJAX?)
  
  Kind regards
  Ana-Maria

  Here is alink to Scott Spendolini autopopulate generator:

  http://HTMLDB.Oracle.com/pls/OTN/f?p=33867:2:1496599659878861:no:

  I use it and it works fine.

• How does the predator AG3 used together the 128 GB ssd and hard drive 2 TB

  I am considering buying a predator AG3 at Costco.  It comes with a 2 TB HDD and ssd 128 b.  How the system is used both in combination?  The ssd is only for boot?  Windows will be on the SSD.  The system will know to go on the HARD disk for programs not on the SSD drive?  I have no experience using a system with two disks of a different type.

  SSD is usually used as installation of the OS and some heavy load programs (editing - audio - video)

  HARD drive is used as data storage or install programs of large size (for most games).

  System does not know where you want to install it that way, he asks during installation

  example of

  C:\Program Files\gamenameXYZ

  You can tell the installer to use instead of C: on SSD HARD drive, so you will change from C to D (if your HARD drive is D: letter of the system)

  D:\Program Files\gamenameXYZ

• How update the values in ValueChangeEvent...

  Hello world

  I use Jdeveloper 11.1.2.0.0.

  I have a scenario as follows. I have 2 fields like password and Confirmpassword.

  I wrote a ValueChangeListener for the password field to make some validations and I wrote an other ValueChangeListener for the field Confirmpassword inorder to compare values entered in the two fields.

  But here..., event in ValueChangeListener field Confirmpassword, iam cannot retrieve the password field value to compare.

  
  

  The reason is... ValueChangeListener is located in ApplyRequestPhase/ProcessValidationsPhase and updated the values in UpdateModelPhase values are so not updated and impossible to get in the ValueChangeListener event.

  
  

  In order to update the values of the tree of components in case of ValueChangeListener, I tried to use code below

  valueChangeEvent.getComponent () .processUpdates (FacesContext.getCurrentInstance ());

  
  

  But the values are not updated... Please suggest me to complete my scenario. Do what is necessary. Thanks in advance.

  
  

  Concerning

  Leprince
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  Hello

  Change the scope of the bean to viewScope.

  Kind regards

• How can the value of the increment on stage?

  Hello

  I'm doing a game where, when the user presses a button it increments a score on stage.

  So far, I put a text field on stage with the counter name:

  set the value of a variable symbol

  sym.setVariable ("score", "0");

  SYM.$("counter").html (sym.getVariable ("score"));

  How to code a button to increase this score every time on it?

  Thank you

  Very close, but not quite.  You will need to increment your counter and then store it so that it continues to increment.  A good example of this is in the sample of the Cracidae Catch on the site to animate:

  http://HTML.Adobe.com/edge/animate/showcase.html

  More specifically, it's what I would do:

  1. in compositionReady, initialize the variable like this:

  sym.setVariable ("counter", 0);

  2. in your scenario where you get a point:

  var counter = sym.getVariable ("counter");

  counter ++;

  SYM.$("counter").html (Counter);

  sym.setVariable ("counter", counter);

  -Elaine

• Background color of sequence, the value without using a video track

  Hi, I can set the background color of a sequence, without using a video track of a white image file or as... I guess this should always made when I saw. Also the idea of the project is a white bgd and evrything with an alpha channel must key in front of a white background... the same account for all texts... + I don't want to lose the highest video track in the vertical center of the timeline for 1 substantive item unique.

  Seems to be a very standard task that needs to be used very often, if people use the first for multi media movies.

  Heaven can't given an option of background color in the sequence settings, project settings or Edit/Preferences... F1 or google pulls a lot on the inlay or layering, but when it comes to the simple question to set the background color of the sequence without using a video track for her... found nothing.

  Does anyone know if and how it works?

  Kind regards

  Frank

  The BG of each track in the sequence is ALPHA. That is to say. There is no color.

  You neeed to use a matte color for what you want to do.

• Version 31 will not get messages from the imap without security the value none Server

  I've updated Thunderbird version 24 to 31. My mail server is an imap server and has always worked well. Since I've upgraded to version 31 I can't recover my mail unless the connection security is set to zero and the port is 143. The imap server using SSL/TLS with port 993. It worked for me on the old version of 24, but now it won't.

  Suggestions? I cannot continue to use no security connection, but would not be pretty.

  you have mail scanning in your anti virus? SSL trips them something terrible and can cause this your light.

• How to increment the value by using "FORALL" instead of loop for

  declare
  
  VAR_TYP TYPE IS VARRAY (32767) OF VARCHAR2 (32767).
  
  V_DSH_CM_NUMBER VAR_TYP;
  V_DSH_DATE VAR_TYP;
  V_DSH_TIME VAR_TYP;
  
  V_DSD_CM_NUMBER VAR_TYP;
  V_PLU_CODE VAR_TYP;
  V_DSD_DATE VAR_TYP;
  V_str_id VAR_TYP;
  
  LN_ITM NUMBER: = 0;
  number of STR_ID: = 30001;
  
  CURSOR CUR_DBMG_SAL_HEAD
  IS
  SELECT DSH. CM_NUMBER, D_DSH_CM_DATE, D_DSH_CM_TIME
  OF DBMG_SAL_HEAD DSH
  WHERE ROWNUM < 6;
  
  BEGIN
  CUR_DBMG_SAL_HEAD OPEN;
  LOOP
  COLLECT FETCH CUR_DBMG_SAL_HEAD IN BULK
  BY V_DSH_CM_NUMBER,
  V_DSH_DATE,
  V_DSH_TIME;
  
  FOR indx IN V_DSH_CM_NUMBER. FIRST... V_DSH_CM_NUMBER. LAST
  LOOP
  SELECT CM_NUMBER, V_DSH_DATE, PLU_CODE (indx)
  TO COLLECT FEES IN BULK
  IN V_DSD_CM_NUMBER, V_PLU_CODE, V_DSD_DATE
  FROM DBMG_SAL_DETL DSD
  WHERE DSD. CM_NUMBER = V_DSH_CM_NUMBER (indx);
  
  -block1
  FORALL ind IN 1.V_DSD_CM_NUMBER. COUNTY
  INSERT INTO PC_ALL_TAB
  VALUES (V_DSH_CM_NUMBER (indx),
  V_DSD_DATE (IND),
  V_DSD_CM_NUMBER (IND),
  V_PLU_CODE (IND),
  LN_ITM,
  STR_ID
  );
  
  LN_ITM: = LN_ITM + 1;
  -block2
  
  END LOOP;
  
  WHEN THE OUTPUT CUR_DBMG_SAL_HEAD % NOTFOUND;
  END LOOP;
  
  commit;
  
  CLOSE CUR_DBMG_SAL_HEAD;
  DBMS_OUTPUT. PUT_LINE('COMPLETE..!');
  END;
  
  o/p:-SELECT DSH_CM_NUMBER, LN_ITM FROM PC_ALL_TAB;
  
  DSH_CM_NUMBER LN_ITM
  4177424 0
  4177422 1
  4177426 2
  4177426 2
  4177426 2
  4177425 3
  4177427 4
  4177427 4
  4177427 4
  
  I need result as below, for eachdsh_cm_number, I need incrementing value of ln_itm... but using 'FORALL '.
  
  DSH_CM_NUMBER LN_ITM
  4177424 0
  
  4177422 0
  
  4177426 0
  4177426 1
  4177426 2
  
  4177425 0
  
  4177427 0
  4177427 1
  4177427 2

  Hello

  Why not do it in single SQL?

  As far as I can decode what you want (you seem to have too many variables), you try to do something like:

  INSERT INTO pc_all_tab (dsh_cm_number,
                          dsd_date,
                          dsd_cm_number,
                          plu_code,
                          ln_itm,
                          str_id
                         )
    SELECT dsh.cm_number,
           dsh.d_dsh_cm_date,
           dsd.cm_number,
           dsd.plu_code,
           row_number () OVER (PARTITION BY dsh.cm_number ORDER BY NULL) - 1 AS ln_itm,
           '30001' str_id
    FROM   dbmg_sal_detl dsd, dbmg_sal_head dsh
    WHERE  dsd.cm_number(+) = dsh.cm_number
           AND ROWNUM < 6;
  

  Concerning
  Peter

• How Peel the string by using a simple query

  Hi gurus,

  I have a table with the following values

  Machine of CREATE TABLE (Serial_number VARCHAR2 (20));

  INSERT INTO values of machine ("THE S0001-00'");

  INSERT INTO values of machine ("CA-C0001-00'");

  INSERT INTO values of machine ("S0002-00'");

  INSERT INTO values of machine ("S0003");

  commit;

  How to peel on any string before and after '-' as appropriate including the character '-', so that the result will be

  S0001

  C0001

  S0002

  S0003

  Kind regards

  efends

  Hello

  fendy_chang wrote:

  Hi Frank,.

  It works, but how to do using regular expressions.

  In fact, I am creating an index of feature based on the skin of a String in order to join other table instead of using as a condition.

  Kind regards

  efends

  Here's a way to do this with regular expressions:

  SELECT Serial_number

  REGEXP_SUBSTR (Serial_number

  , CASE REGEXP_COUNT (Serial_number, '-')

  WHEN '(.*) THEN 0'

  WHEN 1 '(.*) CAN -"

  ELSE "-([^-]*)"-

  END

  1

  1

  NULL

  1

  ) AS the core

  OF the machine

  ORDER BY Serial_number

  ;

  However, if it's a good idea to this part of the index, why isn't a good idea to store the serial number in 3 columns separated all along?  Database are designed to work with (at most) 1 piece of information in each column of each row.  Looks like you got a variable number (1, 2 or 3) of items all crammed together in 1 chain.

• OSB: set the strategy of using WLST GOSA

  Hello
  
  Does anyone know how to attach a GOSA policy to a proxy (with WLST) service.
  I managed to join the police at design time, or through the console, but I can't find how to do it by script.
  
  I know the function WLST "attachWebServicePolicy." I already use it to composite SOA or Java App. But I can not find the syntax for the Proxy of the OSB service.
  
  
  Kind regards
  Mathieu
  
  Published by: mathieu.d on May 23, 2013 05:02

  Mathieu,

  Allocation of GOSA via WLST strategies for services of the OSB is not supported. I have not found all the references of the present in official documentation or the Oracle support site.

  This link @ https://blogs.oracle.com/owsm/entry/owsm_concepts_11g also mentions this limitation from the 11.1.1.5 version and the release notes for 11.1.1.6 makes no mention, that WLST is supported.

  I suggest that you raise a support ticket Oracle to confirm this & to check if there is a plan to support of it in future versions.

  I hope this helps.

  Thank you
  Patrick

• bougth a second hand iPhone 6 how find the previous owner using the serial number?

  I bought a second hand iPhone 6 and he holds a lock to iCloud how to find the previous of this iPhone owner so that I can email him?

  I don't have a serial number of the phone how to use it so that I can follow the former owner?

  Unfortunately, you can not. Take it to where you bought it for a refund.

  See you soon

  Pete