The value FPS using NOR-IMAQ with a GigE camera programmatically?
Hi all
I'm (slowly) learning how LabVIEW plays well with the cameras, GigE, that I just bought.
At this point, I'm trying to understand how to programmatically set the value of fps for the camera. I have been using the examples NOR-IMAQdx to control the cameras so far, but I am open to trying anything. Someone at - it a good example of how I can change the frame rate "on the fly?
My next task will be to find a way to change the size of the image on the screen programmatically, so if anyone has any ideas for me on this path there, I'd be pleased them too well.
Thank you very much
FB
I thought about it:
1. use the vi IMAQdx open camera to open the camera
2 use the "List attributes" in the palette of NOR-IMAQdx to see all available attributes
3 using the step 2, above, I could find the attribute, the attribute "AcquisitionFrameRateAbs".
4. create a node in the output of the open unit VI property, choose 'Attributes of the camera,' select "Attribute Active."
5. set the property node "change all to write."
6. connect a constant string of 'AcquisitionFrameRateAbs' attributeinto the property node value
7. create another node in property 'Attributes of the camera', this time by selecting 'Value' and affecting the type DBL
8. change all to write
9 create a digital control for cadence
10. connect the digital control to the property node 'ValueDBL '.
Presto! You are finished.
Tags: NI Software
Similar Questions
-
How to use the values acquired by different treatments with 9188 OR cDAQ
Hi guys, I'm trying to use NI DAQ 9188 chasis with temperature measurement module 9214. I plugged in 3 modules to the module and split signals. But I'm not sure that I can easily these values in functions. I'm trying to convert them into table 1 d, but when I converted the table 1 d I can't see the values and use separately from each other. For example, I simply multiply the first value of 1 thermocouple. How could I do that. In addition, the signals in the waveform table 1 is not smooth. What is the reason for this? Thanks in advance.
Hi James-D,
Thank you. Now, it is clear to me.
-
How XPoweredByHeaderLevel the value None using wlst
How XPoweredByHeaderLevel the value None using wlst (default value is SHORT).
I mean, I created a domain using wlst.
Now, I want to put some XPoweredByHeaderLevel of WebAppContainerMBean votes to ZERO using wlst.
It will be useful if an example of python (Jython) script is provided.
Help, please.Here is a small example of Jython how to do what you want:
#assuming you already have correct imports for wlst module
#connect to the AdminServer using the appropriate authorities and host information
WLST. Connect (username, password, host_info)
domain #extract
domainName = wlst.domainName#start change a session and navigate to the WebAppContainerMBean
WLST. Edit()
WLST. CD ("/WebAppContainer/" + domain name)
wlst.startEdit)#set attribute to the value of the XPoweredByHeaderLevel to 'NONE '.
wlst.cmo.setXPoweredByHeaderLevel ("NONE")#activate change
WLST. Activate() -
Access the value of a [Text Input with LOV] in an ADF application Panel
Hello
I have a QUERY with id (queryId1) in which I filter data in a table based on search criteria. The search name of the employee.
I would like to take this [Input Text with LOV] element value and use it in a method (the method 'myMethod' is a bean called 'myBean'). The method must also check for a NULL value value. If no criteria have been entered, (in other words, the value is NULL), an exception should be thrown. Otherwise a popup should be displayed showing the name of the selected employee.
I should mention that I'm rather new to ADF (experience of the 1 month!) but I tried to get this working put in place three days without success. I've been all over the internet, but my lack of understanding is perhaps to my disadvantage. I was wondering if someone here might be able to send me a link on how to do so, or explain in detail how this can be done. I have also sought tutorials on YouTube but have found none.
I work with JDeveloper Version 11.1.2.1.0
I'm not allowed to change the version currently.
Thank you in advance!
Kind regards
Riana
Maybe this can help:
https://blogs.Oracle.com/aramamoo/entry/interpret_af_query_s_queryevent
Dario
-
Cannot use the network after using McAfee antivirus with removal tool
Original title: Mc McAfee antivirus more removal tool damage my network cards after that I use it, what do I do? McAfee tech say that they are not responsible.
MC McAfee antivirus more removal tool damage my network cards after that I use it, what do I do? McAfee tech say that they are not responsible. After removing the software and restarted, computer cannot connect to the net (device manager shows problems with NIC miniport McAfee mc?).
Hello
Please join Microsoft Community where you can find the necessary information on Microsoft products!
You can't connect to the network after McAfee antivirus using more the removal tool to remove McAfee software.
The network drivers is maybe damaged.
1. What is brand and model computer?
2. What is error right messagee you receive in Device Manager?
To confirm that the problem is with the driver, do us reinstall the driver:
a. click Start, click Run and type devmgmt.msc and press enter
b. now right click on the network card and uninstall it and restart the computer.
You can also get the latest version of the driver from the manufacturer.
I hope this helps. If the problem persists, let know us and we would be happy to help you.
-
Background color of sequence, the value without using a video track
Hi, I can set the background color of a sequence, without using a video track of a white image file or as... I guess this should always made when I saw. Also the idea of the project is a white bgd and evrything with an alpha channel must key in front of a white background... the same account for all texts... + I don't want to lose the highest video track in the vertical center of the timeline for 1 substantive item unique.
Seems to be a very standard task that needs to be used very often, if people use the first for multi media movies.
Heaven can't given an option of background color in the sequence settings, project settings or Edit/Preferences... F1 or google pulls a lot on the inlay or layering, but when it comes to the simple question to set the background color of the sequence without using a video track for her... found nothing.
Does anyone know if and how it works?
Kind regards
Frank
The BG of each track in the sequence is ALPHA. That is to say. There is no color.
You neeed to use a matte color for what you want to do.
-
How can I use reverse imaq for USB video camera?
Hello
I'm trying "opposite" a video image live. I try to use the "Imaq Inverse" VI and it works for photos, however, I can't it works with a camera USB which is striking images.
I get an error "not an image" that occurs in the Imaq reverse VI when I image acquisition to enter USB plugged into the Img Src for the Inverse VI.
Any suggestions how to get around this problem?
I enclose two files. The "Live video" VI allows the user to acquire video directly from a USB camera. The VI 'Negative video Live' is the file I'm having a problem with.
Thanks for your help!
Hello
I guess your camera deliver RGB images (even you initialized the 8-bit image).
If so, try this way:
It will be useful,
Andrey.
-
Cannot use the NOR-IMAQdx with 3 USB camera driver
I have a system WIN7 64-bit I would use with two USB 3 Vision cameras (both are 24UJ003 from The Imaging Source DFK), which works very well with the software IC software. The camera can be opened with IC software but will be visible only with a cadence of 1fps, any size I put it.
I can open them able and Automation Explorer, but they do not appear under NOR-IMAQdx in the tree. When I click on the software in MAX tree below, NOR-IMAQdx revealed as being installed (14.5). The camera (and OR) instructions say change the camera driver to that found in C:\Program NIUninstaller Instruments\NI - IMAQdx\Staging\NI USB3 Vision, but my driver is located in C:\Program Files (x 86) \National Instruments\NI - IMAQdx\Staging\NI USB3 Vision.
Attempts to install the driver displays the following message is displayed:
"The folder you specified contains a compatible software driver for your device. If the folder contains a driver, make sure that it is designed to work with Windows for x 64 systems".
This makes it sound like the driver is in the wrong place or it does not for a 64 bit OS. Any advice on how to switch them TIS drivers to drivers OR-IMAQdx and also how increase the pace of the second camera would be very much appreciated.
I tried to connect the cameras individually, and they both have the same performance as when they are connected together (we have good pace, and the other has only 1 fps).
Are you sure that the camera is Vision compatible USB3? Nothing that I do not see in the marketing material says it is compatible. Is it possible you need a firmware update to make it compatible?
The installer put IMAQdx driver in the space provided for an x 64 system and he always puts the number of correct bits of the driver down to the system that you have installed. My hunch is that the camera is not to expose a USB3 Vision interface for the driver to bind.
-
Simulate the sine wave using LabVIEW FPGA with NOR-myRIO and display in real time
Hello
I'm relatively new to LabVIEW FPGA. I am trying to test (and later apply) controllers high speed on myRIO.
At this point, I'm trying to simulate the sine wave from 1 to 10 kHz using Sinewave generator VI express. I also intend to display the sine wave on the time real (RT) using FIFO. However, I had a bit of trouble to understaing various synchronization parameters.
1. how to encode information about the sampling frequency generating sine wave? (The side FPGA vi requires only the frequency of the signal and possibly phase and does not rate update lines)
2. how to estimate the number of items in a FIFO? (that is, the relationship between the rate of updates to loop (RT), the signal frequency, sampling frequency and the number of items in the FIFO)
It would be great if we could share a very simple program (side host and target) that did something similar.
Thank you
MILIN
Milot,
I think the problem is the type of data in your FIFO. Your FIFO is configured to use a data type of I16. The problem is the number, it displays only ever will be-1, 0 or 1. To resolve this problem, you must send the sine wave as a fixed point data and convert it to a double on the side of the RT. This should significantly improve your resolution.
-
I can't launch the stepper motor using NI 9501 with the example given.
I have a NOR cRIO-9025. I'm trying to run a motor drive with NI 9501 with the help of the given example (Veloity control (open loop) - NI 9501). The program is compiled on the FPGA, but the motor step does not move. The poster drive status always "disabled by software. What I am doing wrong? I'm under the RT and FPGA live
Hi Pranjal,
You will need to provide an external power supply to the module. If you look at the Manual 9501, you will see that the pins 7 and 8 are intended to power 8 - 30V. If you do not connect this offer, you will have a fault and the Red led should light up. The manual shows you different ways to connect your motor.
When you run the VI, you will want to run only the RT VI. The FPGA VI will run automatically when you start the RT VI.
You are right that there is no file "Items to Move. Instead, you want to spend the following things to your new target: speed control (open loop) - .vi NI 9501 (RT), speed control (open loop) - .vi OR 9501 (FPGA) and the target value. You want to make sure that you drag to the appropriate hierarchy. The RT VI must be less than the RT controller in the project and the FPGA VI and set FIFO must be below the target FPGA. Finally, you want to make sure that Mod1 is a 9501.
I would like to know if any of this helps.
Thank you
-
Hello
I work with APEX 5.0.
I would like a report (classic) display a report of details (also classical report) using a hyperlink, but not a "text-hyperlink" like 'click here for details'.
Instead, I want to use a small icon which will occur the same result when you click on.
It works fine, when the hyperlink is defined as text like: 'click here for details'.
When I try to use an image, I don't get the desired result.
Here's what I tried to Hare:
1)
Link-> Link attributes, then filled column: src = "& WORKSPACE_IMAGES. "" #ICON_NAME # "width ="40"height = 40 ' or img src =" & WORKSPACE_IMAGES. " "" #ICON_NAME # "width ="40"height = 40.
= > no picture for the items in the column, but the link already created for each column of the remains (and works)
2)
Formatting of column-> HTML Expression, then filled: < img src = "& WORKSPACE_IMAGES. "" #ICON_NAME # "width ="40"height = 40" >
= > the image appears for each column element, but the hyperlink is gone.
Somone has idea how to use a picture/icon to have a hyperling in screens reported a detail?
Thank you in advance for sharing your experience.
Kimd cordially
Hi Patrick,
Link to the column-> then filled:
Link text = #ICON_IS #
Link attributes =.
Target = this Application Page
Page = 5
Article 1 = P5_DEPTNO
Value 1 = #DEPTNO #.
Article 2 = P5_DEPARTMENT
Value 2 = #DNAME #.
Put this in the link text not in attributes of link
Remove the code from the link attributes.
I don't have how to make it the way that describe you.
Apex. Oracle.com is a hosted version of application Express, you can build online applications.
Go to this link and the application workspace https://apex.oracle.com/en/
Hope this helps you,
Kind regards
Jitendra
-
It is no longer a row of icons at the bottom right, and asked me to choose a program to use to open files
Hello and welcome to Microsoft Answers. It seems that your computer is infected with malware. The first thing you need to do is re - associate your executable files with applications.
First
Second
Right click on start > search. Type rundll32.exe in the field of the files to be searched. Choose to search for your main drive (usually C). Select the search hidden files and folder advanced features. Click on the search button to start the search. In the results list, find the associated rundll32 file C:\WINDOWS\ServicePackFiles\i386. Right-click on rundll32 to the left of the directory above and choose 'open file location '. The rundll32.exe file should be highlighted when the folder opens. Right-click on the file and choose copy. Then, in the search results list, right-click on rundll32 which corresponds to C\Windows\system32\rundll32.exe and choose "open file location". Again the file should be highlighted. Right-click on the file and choose Remove. Right click again in a free space in the folder and choose Paste. If this does not resolve your problem, you will need to get a windows OS disk and extract the file from there.
Once this problem is solved, you will need to perform several anti-malware analysis. You should start with Malwarebytes. Make sure that you update the parser before the scan.
-
How to get the value of column d/e with combinations of 3 columns?
Hi all
create the table dup_tab
as
Select 'AB100' donnees_1, data_2 ' 100 ', 'NN' data_3 data_4 ' 12345' double
Union of all the
Select 'AB100' donnees_1, data_2 ' 100 ', 'NN' data_3 data_4 ' 12346' double
Union of all the
Select 'AB100' donnees_1, data_2 ' 100 ', 'NN' data_3 data_4 ' 12347' double
Union of all the
Select 'AB200' donnees_1, data_2 ' 200 ', 'BB' data_3 data_4 ' 11111' double
Union of all the
Select donnees_1 'AB101', '101' data_2, data_3 'NB', '1234' double data_4
Union of all the
Select '1235' data_4, data_3 'NB', data_2 '101', 'AB101' donnees_1 double;
I suspect the data as below, donnees_1,data_2,data_3 (a values) but d/f data_4 , I need to get these lines only please help me how to write a query on this
DONNEES_1 DATA_2 DATA_3 DATA_4 AB100 100 NN 12345 AB100 100 NN 12346 AB100 100 NN 12347 AB200 200 BB 11111 AB101 101 NB. 1234 AB101 101 NB. 1235 In my table, I have to find with data of above combinations
Given expected o/p
DONNEES_1 DATA_2 DATA_3 DATA_4 AB100 100 NN 12345 AB100 100 NN 12346 AB100 100 NN 12347 Thank you
Post edited by: Rajesh123 added extra test cases
Hello
Well, looking at the labels that you created for your question you have "Duplicate record".
...
I suspect the data as below, donnees_1, data_2, data_3 (has the same values), but d/f data_4 , I need to get these lines only please help me how to write a query on this
DONNEES_1 DATA_2 DATA_3 DATA_4 AB100 100 NN 12345 AB100 100 NN 12.4 K AB100 100 NN 12347 AB200 200 BB 11111 AB101 101 NB. 1234 AB101 101 NB. 1235 If you want to show the duplicated records, try the following:
WITH t AS ( SELECT 'AB100' data_1, '100' data_2, 'NN' data_3 ,'12345' data_4 FROM dual UNION ALL SELECT 'AB100' data_1, '100' data_2, 'NN' data_3 ,'12346' data_4 FROM dual UNION ALL SELECT 'AB100' data_1, '100' data_2, 'NN' data_3 ,'12347' data_4 FROM dual UNION ALL SELECT 'AB200' data_1, '200' data_2, 'BB' data_3 ,'11111' data_4 FROM dual UNION ALL SELECT 'AB101' data_1, '101' data_2, 'NB' data_3 ,'1234' data_4 FROM dual UNION ALL SELECT 'AB101' data_1, '101' data_2, 'NB' data_3 ,'1235' data_4 FROM dual ) SELECT * FROM (SELECT data_1, data_2, data_3, COUNT(*) over (partition BY data_1,data_2,data_3) cnt FROM t ) WHERE cnt > 1
-
Hello all I said that I would stay with the new site and as well as I have one or two small issues, starting by!
New Web site, rollover buttons with not color in place when you click
And someone told me that it is a very good site, but do not show the images in the box with the yellow frame upwards unless I tilt the screen at a weird angle, I think he means the image of hero! and sounds
as it uses a Tablet
I built this website using the tutorial by David Powers l http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.htm sent to me by Hans-Günter
I could have made one or two mistakes when creating this site, I take my hat off to you, the Web designers, it took me a week to build you could have dune in two hours lol
Please can someone take a look and help me with problems who need a fix
Thank you very much for your time
It was the old site
This is the new website
The address is http://www.lawrenceg.com
This is the code to the Index.html page
<! doctype html >
< html >
< head >
< meta charset = "utf-8" >
< title > < /title > Home Page
< link href = "styles/main.css' rel ="stylesheet"type =" text/css">"
< style type = "text/css" >
body, td, th {}
color: #999999;
}
< / style >
<!-the following script tag downloads a font of Adobe Edge Web server fonts to use in the web page. We recommend that you do not modify it.-->
"< script src="jQueryAssets/jquery-1.8.3.min.js "type =" text/javascript"> < / script >
< script >
var __adobewebfontsappname__ = "dreamweaver".
function MM_openBrWindow (theURL, winName, features) {//v2.0
Window.Open (Theurl, winName, Features);
}
< /script >
" < script src =" http://use.edgefonts.NET/source-Sans-Pro:N6, N2:default.js "type =" text/javascript"> < / script > "
<!-[if lte IE 7] >
< script type = "text/javascript" src = "js/html5shiv.js" > < / script >
<! [endif]-->
< / head >
< body >
< div id = 'wrapper' >
< header id = "top" >
< h1 > < img src = "images/contact_page - image_47.png" width = "43" height = "47" alt = "" / > My Studio < / h1 >
< nav id = 'mainnav' >
< ul >
< li > < a href = "index.html" class = 'thispage' > home < /a > < /li > "
< li > < a href = "About Lisezmoi.html" > about me < /a > < /li >
< li > < a href = 'Work.html Studio' > work in Studio < /a > < /li >
< li > < a href = 'The Gallery.html' > The Gallery < /a > < /li >
< li > < a href = "Us.html of Contact" > contact us < /a > < /li >
< /ul >
< / nav >
< / header >
< div id = 'Heroes' >
< section >
< h2 > < / h2 >
< H2 > welcome to my workshop! < / h2 >
< p > my name is Lawrence; I'm a photographer & amp; Photographic artist < /p >
< p > I have kept this site simple and to the point with no unwanted useless stuff, we have a system of full navigation for your wedding rings at the top if you do not have to keep coming back to the home page every time, check us on < a href = "#" onClick = "MM_openBrWindow ('https://www.facebook.com/LawrencesPhotoStudio ',' Facebook ',' location = yes, scrollbars = yes wid th = 1200)" (, height = 600') "> Facebook < /a > < a href =" # "onClick =" MM_openBrWindow ('https://twitter.com/Lawrencegtraing ',' Twitter ',' location = Yes, scrollbars = yes, width = 1200, hei ght = 600') "> Twitter < /a > < a href =" # "onClick =" MM_openBrWindow ('http://www.flickr.com/photos/lawrenceg/ ',' Flickr location ',' = yes, scrollbars = yes, width = 1200, height is 600') "> Flickr < /a > < /p > "
< / item >
< img src = ' home_page - image.jpg "alt ="image of the studio homepage"/ > < / div >
< section id = 'hand' >
< h2 > this site works best in internet explore! < / h2 >
< p > you can always use firefox and google chrome if you want, this site looks a little better when displayed in internet explore. < /p >
< p > if you decide to buy all our prints, framed or canvas prints! < /p >
< p > all comes with 30 day money back guarantee guarantee and is sold through our secure payment site < a href = "#" onClick = "MM_openBrWindow ('http://lawrence-graves.artistwebsites.com/ ',' FineArtAmerica ',' location = yes, scrollbars = yes, width = 1000, height is 600')" > Fine Art America! < /a > < /p >
< p > so, how can we help you, you are looking for something a little special to hang on your wall, perhaps you have a family to come a meeting < a href = "#" onClick = "MM_openBrWindow ('http://weddindimages.blogspot.co.uk/',",' location = yes, scrollbars = yes, width = 1000, height = 80 0') "> wedding or an important party < /a > as a new addition to the family? < /p >
< p > maybe you think that < a href = "#" onClick = "MM_openBrWindow ('http://childrensphotography2013.blogspot.co.uk/ portraits ',' ',' location = yes, scrollbars = yes, width = 1000, height is 800')" > special portrait of children < /a >, in order to capture a moment in time can be invaluable and don't forget your < /p > baby's first portrait
< p > < a href = "#" onClick = "MM_openBrWindow ('http://petsimages2013.blogspot.co.uk/ ',' animals ',' location = yes, scrollbars = yes, width = 1000, heig ht = 800')" > what our pets < /a > after all what they are part of the family too! < /p >
< p > sometimes we need a photographer to capture a very special moment, but to capture the excellence you need of an artist who can produce the results you are looking for < /p >
< h2 > working with Photoshop! < / h2 >
< p > sometimes your standard photographer in not right for some assignments and you need professional image editing services, check these examples below < /p >
< p >
< side class = "floatleft" > < a href = "#" > < img src = "images/The_art_of_alteringan_image_SMALL.jpg" alt = "working in photoshop" width = "200" height = "140" onClick ="MM_openBrWindow (' images/The_art_of_alteringan_image.jpg', 'photoshop1 ',' location = Yes, scrollbars = yes, width = 1040, height is 740')" / > < /a > < / side > "
< /p >
< p > side view aside, take a look at this image! This was photographed on a rooftop of the apartment on the island of Kos, Greece, when the Sun was high at about 14:00 on a very hot day. As you can see there are things that need to change in the image on the left, we had only one or two small changes! to activate this drad look image in beautiful photo! < /p >
< p > < / p >
< h2 > digital horizons with layer cache < / h2 >
< p > what is a new layer digital background for this special image that needs a complete makeover! < /p >
< p >
"< side class ="floatleft"> < a href =" # "> < img src ="images/pets_small1.jpg"alt ="Pet Photography"width ="200"height ="140"onClick =" MM_openBrWindow ("images/pets_large1.jpg ',' PetPhotography ',' location = yes, scrollba rs = yes, width = 1060, height is 720')" / > < /a > < br >
< / side >
< /p >
< p > check out it! This consisted of one of our Pet photography photo shoots we have done in 2011 for one of our customers, that they wanted both dogs in the same picture, but some dogs do not want to play. So we photographed and then separately to the angle that we wanted, so they would be present in the new digital background! < /p >
< p > < / p >
< p > these are some of the adjustments and improvements we can do, you can find more examples of our editing inside the work studio page! < /p >
< p > < / p >
< p > < / p >
< / item >
< id side = "sidebar" >
< h2 > check out our gallery!
< / h2 >
< p > you can check out some of our work in the Gallery, loves animals, then check out some of our animals wild black and white images, portraits and photography pet < /p >
< h2 > free reviews and tutorials! < / h2 >
< p > you can find some camera and lens customers, more tutorials Photoshop and photography on the Facebook pages and Twitter < /p >
< h2 > visit our store! < / h2 >
love Art, check out < p > < a href = "#" onClick = "MM_openBrWindow ('http://lawrence-graves.artistwebsites.com/',",' location = yes, scrollbars = yes, width = 1000, hei ght = 600') "> Fine Art America < /a > < /p >
< p > each purchase includes a money back guarantee! < /p >
"< div class ="floatleft"id ="figcaption"> < a href =" # "> < img src ="Images/What_you_looking_at_small.jpg"alt ="Birds of prey"width ="200"height ="136"onClick =" MM_openBrWindow ("images/What_you_looking_at.jpg ',' BirdOfPrey ',' location = yes, llbars = yes, width = 1060 CORS, height is 730')" / > < /a > < / div >
< p align = "left" > This is one of the many images, we have to sell, you can choose print, framed print or a canvas we also sell metal printing, acrylic, iphone greeting cards and galaxy phone case too! < /p >
< h2 align = "left" > Photo restoration work! < / h2 >
< p align = "left" > we do also some digital photo restoration work; restore the old black and white! Remove any unwanted photos and much more! < /p >
< h2 > new sets of digital background! < / h2 >
< p > Our Digital Background Sets will come with complete coverage in a layer, set of images and more < /p >
< p > each set will come with a video tutorial showing you how to use these fabulous games with your own images < /p >
< p > set to be launched in 2014 < /p >
< p > or if you prefer, you can simply send us your pictures and let us do the work for you < /p >
< p > we charge only a small fee for this service! < /p >
< p > < / p >
< / side >
<>footer
< p > & copy; Copyright 2013 my studio to lawrenceg.com < /p >
< / footer >
< / div >
< / body >
< / html >
Photos of Laurent g 2010 says:
New Web site, rollover buttons with not color in place when you click
On each of your pages, you need to add the class = "brochures" to your anchor tags.
So the link to the "about me" page looks like in below:
- On Lisezmoi.html"class ="brochures"> About Me"
- The Gallery.html"class = 'thispage' > The Gallery"
-
How to increment the value by using "FORALL" instead of loop for
declare
VAR_TYP TYPE IS VARRAY (32767) OF VARCHAR2 (32767).
V_DSH_CM_NUMBER VAR_TYP;
V_DSH_DATE VAR_TYP;
V_DSH_TIME VAR_TYP;
V_DSD_CM_NUMBER VAR_TYP;
V_PLU_CODE VAR_TYP;
V_DSD_DATE VAR_TYP;
V_str_id VAR_TYP;
LN_ITM NUMBER: = 0;
number of STR_ID: = 30001;
CURSOR CUR_DBMG_SAL_HEAD
IS
SELECT DSH. CM_NUMBER, D_DSH_CM_DATE, D_DSH_CM_TIME
OF DBMG_SAL_HEAD DSH
WHERE ROWNUM < 6;
BEGIN
CUR_DBMG_SAL_HEAD OPEN;
LOOP
COLLECT FETCH CUR_DBMG_SAL_HEAD IN BULK
BY V_DSH_CM_NUMBER,
V_DSH_DATE,
V_DSH_TIME;
FOR indx IN V_DSH_CM_NUMBER. FIRST... V_DSH_CM_NUMBER. LAST
LOOP
SELECT CM_NUMBER, V_DSH_DATE, PLU_CODE (indx)
TO COLLECT FEES IN BULK
IN V_DSD_CM_NUMBER, V_PLU_CODE, V_DSD_DATE
FROM DBMG_SAL_DETL DSD
WHERE DSD. CM_NUMBER = V_DSH_CM_NUMBER (indx);
-block1
FORALL ind IN 1.V_DSD_CM_NUMBER. COUNTY
INSERT INTO PC_ALL_TAB
VALUES (V_DSH_CM_NUMBER (indx),
V_DSD_DATE (IND),
V_DSD_CM_NUMBER (IND),
V_PLU_CODE (IND),
LN_ITM,
STR_ID
);
LN_ITM: = LN_ITM + 1;
-block2
END LOOP;
WHEN THE OUTPUT CUR_DBMG_SAL_HEAD % NOTFOUND;
END LOOP;
commit;
CLOSE CUR_DBMG_SAL_HEAD;
DBMS_OUTPUT. PUT_LINE('COMPLETE..!');
END;
o/p:-SELECT DSH_CM_NUMBER, LN_ITM FROM PC_ALL_TAB;
DSH_CM_NUMBER LN_ITM
4177424 0
4177422 1
4177426 2
4177426 2
4177426 2
4177425 3
4177427 4
4177427 4
4177427 4
I need result as below, for eachdsh_cm_number, I need incrementing value of ln_itm... but using 'FORALL '.
DSH_CM_NUMBER LN_ITM
4177424 0
4177422 0
4177426 0
4177426 1
4177426 2
4177425 0
4177427 0
4177427 1
4177427 2Hello
Why not do it in single SQL?
As far as I can decode what you want (you seem to have too many variables), you try to do something like:
INSERT INTO pc_all_tab (dsh_cm_number, dsd_date, dsd_cm_number, plu_code, ln_itm, str_id ) SELECT dsh.cm_number, dsh.d_dsh_cm_date, dsd.cm_number, dsd.plu_code, row_number () OVER (PARTITION BY dsh.cm_number ORDER BY NULL) - 1 AS ln_itm, '30001' str_id FROM dbmg_sal_detl dsd, dbmg_sal_head dsh WHERE dsd.cm_number(+) = dsh.cm_number AND ROWNUM < 6;
Concerning
Peter
'The Gallery' link on the 'Gallery' page looks like this:
Do the same for the pages 'Studio work' and 'contact us '.
Photos of Laurent g 2010 says:
And someone told me that it is a very good site, but do not show the images in the box with the yellow frame upwards unless I tilt the screen at a weird angle, I think he means the image of hero! and sounds
as it uses a Tablet
They're all pretty a your subtle grey but that I do not see is on the page "about me". You just need to bring the gray tone to the top of a few stops.
Maybe you are looking for
-
MacBook Pro, early 2011 / replacement?
I have a 15 "MacBook Pro, since early 2011. I discovered that the battery will not hold a charge. Is the solution just a new battery? Which is something I can easily do myself. I don't want to say that this is not not a value just like a certain stor
-
Cannot get HP722C to install the new Win7 Pro 64 bit OS. I saw a long post on HP, on a 'bridge', but it assumes that the driver has been installed and that it simply does not work. I can't even a driver to install. The CD will not work, pilot is not
-
Is it possible to change the default display of some files?
Original title: default display for certain folders? Some files still have the text. Still, some folders have pictures. Photos should be displayed as thumbnails; text list or details. Is it possible to implement this? Folder options is rather poi
-
BSOD when customizing Image WinPE XP SP3 2.0 WAIK?
I use the Kit Setup automated Windows (the original version of 13/02/2007) on a Windows XP SP3 machine to date, producing an image file WinPE 2.0 custom to boot from the CD-ROM. If I make any changes to the winpe.wim origin, (for example, after http
-
400-224: assistant HP keeps asking to install the BIOS update
The update I tried to install is SSID family ROM 2 B 18. The number of sofpaq is SP70370. Version 80.08Ap. It installs, but there is a short restart and then the red exclamation mark appears in the wizard again. Any help would be appreciated.