OSB: set the strategy of using WLST GOSA

Similar Questions

• How XPoweredByHeaderLevel the value None using wlst

  How XPoweredByHeaderLevel the value None using wlst (default value is SHORT).
  
  I mean, I created a domain using wlst.
  Now, I want to put some XPoweredByHeaderLevel of WebAppContainerMBean votes to ZERO using wlst.
  It will be useful if an example of python (Jython) script is provided.
  
  Help, please.

  Here is a small example of Jython how to do what you want:

  #assuming you already have correct imports for wlst module

  #connect to the AdminServer using the appropriate authorities and host information

  WLST. Connect (username, password, host_info)

  domain #extract
  domainName = wlst.domainName

  #start change a session and navigate to the WebAppContainerMBean

  WLST. Edit()
  WLST. CD ("/WebAppContainer/" + domain name)
  wlst.startEdit)

  #set attribute to the value of the XPoweredByHeaderLevel to 'NONE '.
  wlst.cmo.setXPoweredByHeaderLevel ("NONE")

  #activate change
  WLST. Activate()

• try to install the update to program and get this message: this program has been blocked. Your administrator set the strategy of blocking this program.

  I got limewire 5.2 installed and tried to install the 5.5 update, but keep the same message: this program has been blocked. Your administrator set the strategy of blocking this program. LimeWireWin.exe unapproved Publisher"I really want this program on my computer, I tried right click on the file to"run as administrator."I also tried to go to control panel, click Administrative Tools (had to change to Classic view to find), but could not find the local security settings.

  'Local security settings' are a reference to group policy, group policy is not included in the 'Home' of the editions of Windows.

  Is there a Parental control on your machine?  'Parental control' is a section of help and Support, accessed via the Start Menu / Help and Support.

  Following on the publishing server warnings type "Publisher" in the same program help and Support.

  Have you tried to clean your Temp folder, you can do this by typing folder in the Start Menu RUN box.  This will open your Temp folder, there, you can remove all Windows will allow you to do.

  It may be necessary to show both hidden and system files and also uncheck 'Hide known file types' in Control Panel / folder Options / view to navigate to the mentioned location of Temp.

  "Policies" could be mentioned around this area of the registry.

  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies

  To restore default security settings, follow the instructions of Vista in the present.

  Any security software interfere with your installation?

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222/#appliesTo

  Have you tried to create another user to test with?

  Sometimes when you right-click on a file to access the properties in a box to unlock to be seen at the bottom of the properties.

• How to set the sampling interval using DAQ hardware?

  Now I have a sensor capability and hardware DAQ 24 bit (http://www.mccdaq.com/usb-data-acquisition/USB-2404-10.aspx).

  The DAQ hardware has the 50kS/s maximum sampling rate. My question is how to define the range of data collection. For example, if I set the sampling rate of 2000, continuous sample mode, I use read.vi DAQmx in a while loop and set the "number of samples per channel" to 100. I want to plot these data over time using a XY Chart and also save this data. So I add a 'Medium' function to get the average of 100 samples per each loop (medium, there are 20 release of data per second). But when I put a 'number of samples per channel' much more small (for more data per second), there are a few problems. It seems that the program cannot read the data as much and get the average at a higher frequency. I don't know where is the problem. Overall, the collection of data more frequently? Maybe I didn't articulate my question. I'll upload a simple program later if necessary. Thank you.

  
  

• How to set the doctype node using dbms_xmldom?

  Hi all
  
  IM using oracle 10g. I generated an xml file using dbms_xmldom.
  
  I need set the version xml and doctype to my xml file.
  
  XML version I've defined using dbms_xmldom.writeTofile.
  
  But not able to set the doctype... tried with dbms_xmldom.makedocumenttype... But no result...
  
  How to set the doctype using dbms_xmldom?
  
  Concerning
  Sankar MN
  
  Published by: SankaraNarayanan.M.N on October 17, 2011 05:40

  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14258/d_xmldom.htm#i1121082

• set the input value using a workflow setting?

  Jdev 11... 2
  I have a taskflow browse master / detail that called the edict taskflow passing parameters to a router that will either modify it or create method for the detail record (change/create master is in a different position). I can successfully modify/create the main form and I can change/create the detailed form, but I didn't understand how to set the input value for the agency_Id (of the master) in detail. I control data binding to create my detail record 'create', and I have a task flow parameter that has the agency_id I want as the default value in the detail. I don't know where to put the input value. I tried to add another method to the method call that has her 'create' binding for retail, but it seems that I can have only a single method. Do I need another method call to set it? Or should I do something programmatically? (I'm Javaless, so hopefully I can do declaratively).
  
  Thanks much for any help. If I can figure out how to make this piece, I'll have the beginning of an application that does something useful.
  
  LB

  Hello

  There is a new Createmethos called 'create with Params' that you can use for this.

  http://www.Oracle.com/technology/products/jdev/tips/fnimphius/createWithParameters/createWithParameters.html

  Simply plug the parameter to the variable of pageFlowScope containing the input parameter

  Frank

• How to set the NFS storage using the HA function

  HI friends,

  How to configure NFS storage to use the HA?

  Do all esx hosts, see cluster the same lun, comfiguration files?

  Thank you.

  You need:

  • VMkernel for NFS ip Storage

  • Mount the NFS on each cluster host esx (as shared storage) group so that all ESX hosts see your virtual machines

  How to:

  • Create new Cluster

  • Edit the Cluster and enable HA for the cluster

  • For the game from the beginning to 'use the cluster configuration' default virtual machine

  • Then you're ready to go

  Others, I think, someone will add for you...

  System engineer

  Zen Systems Sdn Bhd

  Malaysia

  www.no-x.org

• set the database parameters using the init.ora file

  Hi all
  
  I'm working on a product of oracle (BI Apps), it gives a setting recommended database values in an inti.ora file. How can I apply this file to my database? in other how can words I use the values of the recommended settings in this file?
  
  Thanks for your time.

  Hello

  Try this:

  (1) connect to your database as a SYSDBA
  (2) issue: CREATE PFILE='/tmp/pfile.ora' OF SPFILE;
  (3) /tmp/pfile.ora to modify and add some references in your init.ora requests file - or update the current entries if those that already exist.
  (4) stop your database.
  (5) start your database in restricted using the new /tmp/pfile.ora mode to see if the settings are ok and if your database will start with them. (If he - go to 6), if no, go to 3)
  (6) question: CREATE SPFILE FROM PFILE='/tmp/pfile.ora'
  (7) judgment of the database
  (8) start as usual-, this will use the spfile with the changes.

  Nice.

  Note:
  Step 2) assumes that you are on * NIX and are actually using a spfile in your database already...

• OSB - loads the URL resources using proxy

  Hi all
  
  How is - a force the OSB to use a proxy server when you use the option of loading resources of the URL?
  
  I am creating a resource of wsdl from a url, but the OSB has need to use a proxy to access the url.
  
  I tried to create a Proxy Server under system-> resources-> Proxy servers Administration, but I can't seem to find a place to use a proxy server?
  
  How boys and girls are so wsdl files a proxy?
  
  Thank you!
  
  William

  Wiliam,

  I faced the same issue in SOA Suite. I solved it by adding proxy.host & proxy.port params to java starts at parameters.

  Kind regards
  Milan

• set minimum password length using wlst

  CD('/SecurityConfiguration/base_domain/Realms/MYREALM/AuthenticationProviders/DefaultAuthenticator')
  cmo.setMinimumPasswordLength (5)
  
  Gives me this error message. How to solve this?
  
  Connected to the Server Admin "AdminServer" that belongs to the domain "base_domain"
  
  WARNING: A non-secure protocol was used to connect to the
  Server. To ensure the safety of on-the-wire, the SSL port or
  Admin port should be used instead.
  
  Already in Runtime Config
  
  / SecurityConfiguration/base_domain/areas/myrealm/AuthenticationProviders/DefaultAuthenticator
  Problem call WLST - Traceback (innermost last):
  File "/ admin/Oracle/Middleware/user_projects/domains/base_domain/scripts/createUsers.py", line 20, in?
  at weblogic.management.jmx.ExceptionMapper.matchJMXException(ExceptionMapper.java:74)
  at weblogic.management.jmx.MBeanServerInvocationHandler.doInvoke(MBeanServerInvocationHandler.java:506)
  at weblogic.management.jmx.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:380)
  to $Proxy17.setMinimumPasswordLength (Unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  
  java.lang.RuntimeException: java.lang.RuntimeException: the requested attribute is not exposed via JMX: setMinimumPasswordLength

  Hello

  Seems that your WLST Script a startEdit() the missing function:

  http://middlewaremagic.com/WebLogic/?p=5234#comment-2916

  .
  .
  Thank you
  Jay SenSharma

• How to set the settings without using the name?

  In my OpenGL\DirectX C++ engine that I wrote a material format clever for managing shader and texture settings, I do the same Molehill help now, but I can't find a way to know a registration number parameter.

  I use PixelBender3D shaders, I want to use setProgramConstantsFromMatrix and setProgramConstantsFromVector to set my values instead of this helper class settings that allow you to by name (things with strings during execution should never used in vidogames and store name instead of the register number is just more painful)

  I have seen that there is a ParameterRegisterInfo class, which inherits from RegisterInfo, that cointains a variable 'register', but it seems to be private, and I can't access the number of registry from there (I don't even know if register.baseNumber is really the one I need, but seems that Yes).

  So, is it possible to get the registration number of a parameter to use with setProgramConstantsFromMatrix\setProgramConstantsFromVector?

  If not, please, it implements! Functions such as setMatrixParameterByName are certainly useful, but should not be the only way to set a parameter.

  I know that some of the samples use setProgramConstantsFromMatrix already, but every time the registry value is simply coded hard in and is not calculated.

  I hope it's clear and thanks in advance!

  This complaint has developed a couple of times since we released the beta version. You should have access to this information, we'll fix it in a future release.

• How to set the hp7510 to use only black ink

  C311a model HP 7510

  How can I use black ink only each time unless as otherwise defined. I use a Mac Book Pro & P command does not offer this option.

  Hey,.

  You can follow these steps:

  Step 1:

  Select Print on the file menu.

  

  Step 2:

  Click on the popupbutton and select the quality and the media.

  

  (under Mac os x tiger select Colorsync and after that select gray tones)

  

  Step 3:

  Check printing in grayscale.

  

  Step 4:

  Press the button print.

  Source: Mac Support

• How to set the title when using InvokeManager (MediaPlayer)

  Hi Im using InvokeManager to play the video file (Media Player)

  How to change the title when media player to play the video (above)-> it by default uses the name of the file being played

  but I want to change this

  How to do this?

  Thank you

  Try this

  InvokeManager * invokeManager = new InvokeManager();
  InvokeRequest cardRequest;
  cardRequest.setTarget ("sys.mediaplayer.previewer");
  cardRequest.setAction ("bb.action.OPEN");
  cardRequest.setUri ("* video url *");
              QVariantMap map;
  Map.Insert ("contentTitle", "My title");
  QByteArray requestData = bb:psObject::encode (map, NULL);
  cardRequest.setData (requestData);
  Response InvokeTargetReply * = invokeManager-> invoke (cardRequest);

  Note: Mark your post as solved, if this solves your problem

• Set the member formula using java api

  Hello

  I'm trying to define the formula by member using the java code and here is the code snippet I use. But some how, the formula is somewhere in cache, but not updated in the server of the ESS. I have appropriate privileges to update the data in Essbase. Any thoughts would be helpful. Thank you.

  try {}

  IEssCube = formulaCube

  olapSvr.getApplication (appName) .getCube (cube);

  IEssCubeOutline outline = formulaCube.openOutline (false, false, true);

  If (contour! = null) {}

  IEssMember requiredMember = outline.findMember (member);

  If (requiredMember! = null) {}

  System.out.println ("formula:" + requiredMember.getFormula ());

  requiredMember.setFormula ("[RL. LTV. CSE] + [RL. LTV. OPEX.0071]");

  System.out.println ("value according to formula:" + requiredMember.getFormula ());

  requiredMember.refreshPropertyValues ();

  requiredMember.updatePropertyValues ();

  System.out.println ("after updatevalues:" + requiredMember.getFormula ());

  }

  Outline.Save ();

  Outline.Verify ();

  outline.updatePropertyValues ();

  }

  It works if you restructure prior to closing.

  Outline.Save ();

  outline.restructureCube (IEssCube.EEssRestructureOption.KEEP_ALL_DATA);

  Outline.Close ();

  In theory, it should only do a restructuring outline only.

  See you soon

  John

• Set the font size in the generation of explicit report using a model

  Does anyone know how to set the font size using the generation of explicit report with MS Word?  I have trouble getting my 11th column to fit the correct size with the imported data table.  The values end up being off the screen.  Any ideas?

  I suspect that the answer is somewhere within MS Word instead of LabVIEW.  However, I tried it figure out in both and had no luck.  In WORD, I updated all fonts size = 10.  However, the table is imported to the format = 12.  In addition, the table cells are the same size, regardless of the number of columns is imported.

  David

  Just for future visitors to this question are aware, it is a known problem with the generation of report express vi.  There is no solution at this time and the problem will be resolved in future versions of LabVIEW.