How you Archives used in your project?

Similar Questions

• BlackBerry smartphones ' you have used all your available device pin changes for your My World account.

  I recently replaced my BB Tour Sprint with Sprint, and when you try to reinstall my apps world bought for BB looks like this: "you have used all your available device pin changes for your My World account.» I'm getting this error when I try to use my BB Tour with the NEW PIN {led by privacy}, the email account used is {under the direction of privacy} a way to solve this issue? I had a few exchanges with Sprint, because Tour trackball problems. I enjoy using App World, however I can't buy something again or recover my previous purchases with this error. My previous PIN is 30BE5BD9 (I got to the list because the BB tech support link listed my new PIN invalid - as well as my old pin code). Please notify.

  PS: Crackberry App World made a PIN exchange a simple question - simply plug your new PIN and you can easily recover your purchased applications. RIM's App World support really dropped the ball on this one - there are a lot of tricks of BB exchanged and this App World problem really needs to be rectified. There were already several messages on this forum about it, and the owners are not able to submit their complaint to the BB technical support because the link would not accept their new PIN! Shame on you RIM.

  Hello!

  There is actually a fix for all your questions, but the first that needs to be fixed is the answer to bad PIN code on the RIM support site. However, this hotfix cannot be displayed publicly. Therefore, please check your private Messages on this site for a PM from me with these instructions.

  BTW - if you think also that your message has been changed by the mods to delete any personal information (pines, e-mail addresses, etc.). .. as a public forum, it is generally not a good idea to post them here. In addition, these forums are a user to channel... support not a portal user-to-RIM...

  See you soon!

• How you can use iFoto library and Lightroom together?

  Hat someone eine wie die Mediathek und zusammen kann man use Lightroom iFoto idea?

  Hallo christophc,

  Sie können nicht zusammen verwendet werden. Es gibt keinen search Weg, um hin und her zwischen iPhoto und zu going Lightroom.
  Wenn Sie Lightroom 5 oder high installed haben, können Sie iPhoto library in Lightroom importieren mit iPhoto importieren Plugin (Fotos nicht auf Mac El Capitan App available as)
  Aber das wird alle Bilder aus iPhoto, Lightroom importieren, so dass Sie die Bearbeitung in Bibliothek starten.

  Bezugsartikel: opening Import plug-in for Lightroom FAQ

  Kind regards

  Claes

• How to import widgets into your Muse project?

  How to import widgets in the Gallery of widgets of Muse (http://muse.adobe.com/widget-gallery) in a project that I'm already working on?

  Post edited by: Marvin Glenn

  First thing to understand is that the widgets of Muse Gallery is more a central location to search and find widgets (an aggregator of sorts), as an all in one store (like iOS and Android app stores). Many widgets are hosted on external third party websites and clicking on the "get this widget" button will bring you to their sites, where you have to make the payment/filling in details for those who are free and do so that the terms sites to download this widget (as opposed to everything that happens on the Muse from the Adobe Web site).

  Once you have the file (a file with the extension .mucow) widget. Double-click it to open it in Adobe Muse that will install it automatically. If windows Explorer (or equivalent ios) is not an association of a .mucow file, point it at Muse cc.

  The new widget should now appear in the pane on the right side that you can use in your project, you are working on that. You may need to restart Muse for this to take effect.

  Hope that helps.

• How to open the first CC2015 project in the cc2014 Version? HELP PLEASE!

  I need to work on this video I already started to edit on a newer version of first. Can't understand how to save to an earlier version. I thought I could do that as with the rest of the adobe programs but could not find this version at first. I need to work on this video on another computer that has cc2014. Help

  You cannot directly, there is no backward compatibility - but you can do this:

  In 2015 the body, go in your project Panel and select everything that's in it (click on an item and then go to the Edit menu > select all).

  Once all the elements are selected go to the file menu > export > Final Cut Pro XML... and create a XML of your project.

  Move the XML file on the computer with the body, 2014, as well as all your referenced media (photo, music, graphic files, etc. that you have used in your project).

  Launch the 2014 body and go to the file menu > import and select the XML file that you had done.

  You probably have to reconnect all of your media sources.

  XML cannot transfer what you did your sequence, like the effects, but must carry on a significant amount of your project.

  MtD

• You want to speed up your project preparation time?  You'll want to try this handy free program!

  I recently stumbled on a super convenient, free program called Post haste.

  It's a brilliantly simple program that allows you to create project templates, as well as at the press of a button unique, you can have your project instantly set up for you, complete with new PP, AE, projects PSD (etc.), all automatically named after your project, and whatever the structure to better support file suit you needs.

  Here is an example of the simple model I created for the wedding same day changes:

  

  Any template file named "Template" automatically renamed Gets the name of the project!

  There, I sent Adobe an EN that would allow us to implement the models within the PP, so that when we open a project, we have all of our most used locations already created for us.  Can't wait to post seems to remove the need for Adobe implement than FR, given that you can set any model post haste to automatically create a new empty of the first project, or create a renowned project copy previously created PP all your common locations has already implemented (for example, video, footage, titles, Audio, AE) etc.) !

  If you want to accelerate your project preparation time, you might want to check this out!  I wish I had discovered a long time ago.

  This small free program essentially eliminates the need for Adobe implement the functionality it provides, something that Adobe could easily do in my view, would be a service to users of first in general, would be to add this program to their front page Plug-ins in the section Workflow tools.  I don't know what the policies are regarding this software may or may not appear on this page, but something that can help publishers Premiere Pro the way Post haste can should definitely be on this list IMO. (For my part he wishes had been on this list a long time ago when I checked out).

  

  If anyone knows of any alternative program that does the same thing done Post haste, enter it here.  It would be fun to try an alternative to compare.  More options, get to know us, the more effective our workflow becomes, so I hope this tip helps some of you out there!

  The way it works is that you have installed your project how you would like in the built-in template editor, with the structure of the file desired on the disc and the necessary sequence and bin configuration settings in your project file.

  Then when you need create a new project, you enter the parameters in the rush of the post and it will create a new project of this model, using the parameters for naming files. It is useful to maintain the same structure between projects and it is useful for the strict naming conventions with facilities.

• How do I use a different version of the BlackBerry JDE?

  Hello

  I installed BlackBerry JDE version 4.5 to 6.0.

  How can I find out the current version used to Eclipse?

  I also try to change using the JDE follosing version this article, http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800901/How_To_-_Confi...

  But there is no such ide.bat under the directory.

  Thank you.

  Under your project directory, there is a JRE System Library. Right-click on it and select Properties. After that, I think you know what to do.

  I hope this helps.

• Exchange 2007 - how you save it?

  I am interested to learn how people save their E2K7 environments that are running in VMware (product... not the company - while I appreciate the comments from people of VMware!). Could you please let me know how you want to save your from?

  1. What is your environment (# mailboxes, the mailbox average size)

  2. how backup application you are using?

  3. using VCB?

  4. How are you doing your restores?

  5. all that imagine you that can be useful.

  Thank you!

  Ken Cline

  Technical Director, virtualization

  Wells Landers

  TVAR Solutions, a company of the Wells Landers group

  VMware communities user moderator

  Hi Ken.  We are internally at VMware backup using a streaming backup of the guest OS in a virtual tape (Data Domain) library.  Details can be found in the white paper to:

  http://VMware.com/files/PDF/solutions/08Q4_VM_Exchange_Server_2007_VI3_WP.PDF

  We also examined by using backup software that integrates with the SAN at the group level VSS backups.  This increase in the cost of the solution due to the requirement for additional discs contain clones.

  Kind regards

  Dave

• Re: Qosmio G50-10 t: How can I use the Quad - Core CPU Toshiba HD?

  Hello.

  And how you can use several Toshiba Quad Core HD processor with four RISC SIMD 128-bit processors in the Qosmio G50-10 t except that: enables support for H.264 encoders / HD / MPEG2 decoders, with functions for convert, transcode, navigate using the face (Face Navigation) detection and control actions. INJURY is not used!

  Maybe someone knows some software sales in which it could be used.

  Hello

  This Quad Core CPU is an additional processor that is not always in use.
  It was designed in the order using the main processor in some of the media process.
  For example, the Quad Core CPU works during the encoding or decoding of certain video standards. If you want to change it the standard of the video, the Quad Core CPU helps you complete this quick procedure.

  In addition, it improves the quality of the video (not HD). So, theoretically, you can view the videos in HD quality.
  Of course, you won't get the same quality as a film that has been recorded in full HD, but the Quad Core helps you improve the 576i pictures.

• How link to or use the CDN from Adobe After you publish your project?

  So maybe I'm stupid, but I can't really find any useful info on actually works this edition of CAN...

  It's White edge animated API adobe books (also just below him in the section on the HTML pages, I think they are missing from the header of a word in the first sentence... kinda funny - API JavaScript Adobe Edge animate CC)

  Accommodation CDN

  With the help of Adobe Content Distribution Network (CDN) is a great way to speed up the delivery of composition Animate. Compositions using the CDN from Adobe all share a unique URL for jQuery and the Runtime of edge. The cache of the browser execution, so that the user downloads only the library once no matter how can animate compositions they discovered, even the compositions are on different sites and produced by different authors. Does not use the CDN if your composition should work without an Internet connection or if you want to use your own hosting exclusively.

  The Runtime CDN animate using the following URL:

  <script type="text/javascript" charset="utf-8"    src="http://animate.adobe.com/runtime/4.0.0/edge.4.0.0.min.js"></script>

  I mean this all sounds good! So, how to use it? I don't see a place prominently in this URL to replace it with what would be the link to my project? Also, I have not all the numbers I could put in a URL to get the appropriate content unique identification. Shouldn't I have an ID unique? Measure out how what is mine? Maybe I don't really understand how it works...

  My goal is to have this nice little animation I did in the game of edge when someone visits the Web site and then blend in the homepage. Is this possible? It would be great if I could just put some script links in the header and let the adobe CA take care of all aspects of delivery and to keep my load on the server down rather than upload the files myself and have to use extra bandwidth.

  Thank you very much!

  Hey there,

  The CDN from Adobe hosts only animate them DURATION and jQuery Javascript files required (mentioned below), which means you do not have to include in your HTML directory on your server. You will still need to accommodate code HTML and other .js files that creates Animate on your server. Those that are specific to your project.

  When you publish to the web, by default you will be connect Adobe CDN, which hosts two files only:

  Edge.4.0.0.min.js

  jQuery - 2.0.3.min.js

  These files are not unique to your project - each publication Animate uses these files, and each contains the same exact data: they help make HTML files animate to "do what they do" with the movement and interactivity.

  If for any reason any you would bind to the runtimes files on Adobe CDN, you can uncheck "Host runtime files on Adobe CDN" and publish for the new website. A "edge_includes" folder will be created at the root of your web site publish the folder that contains the two files above.

  HTH,

  Joe

• You can use your apple TV without an internet connection?  If so, how do install you it?  I have currently basic cable and that you have a wireless router.  Thank you

  You can use your apple TV without an internet connection?  If so, how do install you it?  I have currently basic cable and that you have a wireless router.  Thank you

  What you want to do with the ATV without an Internet connection?  It is designed as a device of Internet broadcast, so you can access online content via the big screen in the living room rather than the pocket computer in your pocket...

  technically I think its possible but you would still need an Internet connection for the installation and update of the software process and even less to download applications and games, but if you don't have an Internet connection apps/games will probably not work. I don't think that there is 'out of play'...

• How to you start ODI processes in your projects?

  Hello

  I was wondering how you guys run your ODI process to your customers?

  I use the scheduled tasks that call utility startscen, but a very inelegant solution. I explores FDQM days and has not found a way to call an ODI package independently, because it seems to integrate with staging of FDQM are and then a validation, mappings and filter options, but what I was looking for was an interface to launch the packages where users could see directly the result of executing and so on.

  How do you do it?

  Concerning

  Hi Pedro,

  That's what I meant by specific requirements. If you just need an interface for the user to display the status, etc., you can use the Console to the ODI. It is a vision based on the web in the metadata of the ODI. All the same information you will find in the operator in ODI Studio can be accessed through the Console of ODI.

  If the end user needs to run processes on an ad hoc basis, you can use ODI Run-Time Web Services to launch an ODI or support Plan (integration running process) scenario. It might take a bit of development to create an interface which the end user can launch services, but it would allow for the ad-hoc process execution.

  I'm not sure what you mean by "...". they are not defined periodically (not yet closed account IE) how it will launch? ». Are you referring to the schedule, search for a specific value before starting a process?

  Kind regards

  Michael Rainey

• Is it possible to save your project who keeps only files that are used in the order and get rid of files that you do not use?

  my project is at an advanced stage now, a lot of media loaded up and its got to the point where the project keeps "forgetting" his makes (the line goes to yellow when it should be green)

  I assume that this may be due to the face that I have a lot of media loaded upward there now, including many from the effects of exports which should be large enough

  so, I would like to save the project or export the project in such a way so that it retains only the bare minimum of files that im actually... better still, use if she maintained only the part of the files that are used and stripes out of the rest, but maybe it's wishful thinking?

  I also wonder if I could save the project, bringing files in a separate folder, only the files used in the project

  I'd love to, having someone take the time to clear this up for me.  Thank you

  Project Manager in the file Menu

  Backup first carefully!

• 2015.3 - How to archive a project without proxies?

  Does anyone know how to exclude Proxy copy of images of projects archived using Project Manager?

  I mean, it's - the proxy files are not copied anymore, but when I open the project checked - it tries to connect to the proxy files that no longer exist. Is there a correct workflow to get rid of these before check-in?

  I'd appreciate any help!

  There is currently no way to permanently detach Proxies, but there is a way to stop the LinkMedia dialog asking for Proxy clips. When you receive the dialog box link media asking the location of proxy servers, click on offline everything and then save your project. When you reopen the project, he should ask is no longer for the missing Proxy clips.

• VI Analyzer - how you re there for this use case?

  My group has different people working on different LVPROJs for every software we have available. Each LVPROJ uses our user.libs and instr.libs, as well as a 'framework' in General, it is the same for most LVPROJs.

  I really think that the VI Analyzer toolkit would be powerful for code reviews, but only if I can configure it in a way where what tests I run and what are the criteria can be saved and used on any project. I can't get this to work for me. I want to save all these configurations and easily use it on new LVPROJs - the easier I can do this process, the more likely others will be to be used for the revision of the code. How would you do it? (if it's even feasible)

  I suggest the creation of a .cfg file without a link with the project, but with all the tests selected and configured as you wish... so a .cfg file with no 'elements to analyze' specified. Then, when you work on an individual project, open the CFG file, add the folder to the root of the project to the analysis, then save this CFG file with this project. This means that you can not have the project in your CFG file link, but assuming that your project is everything in a folder of level higher, which should not really be a problem, because the CFG file will be "linked" to the moment there in the top-level folder that contains your project.