L10-108 USB problem

Similar Questions

• Satellite Pro L10-103 - USB ports not working not

  Hi, my Satellite Pro L10 - 103 USB Ports do not work. I tried different things and finally my Advisor rubbed my computer clean of all programs and operating system. After reloading of the set up disc and having lost my dear some programs I am no further forward. It still does not.

  Anyone know if this means that it is a mechanical problem with the computer? (I use Windows XP). Your help would be greatly appreciated.

  Hey Buddy,

  As wrote Akuma did you use the Toshiba Recovery disk or the Microsoft Windows disk?

  After installing XP, make sure that Service Pack 3 is installed. It contains important updates and can be downloaded on the official page of Toshiba.

  In addition, try to remove all the USB ports on the Device Manager, restart the computer. Ports will still be recognized and ready to use once.

• Toshiba Satellite L10 108

  Hello!
  I wonder if anyone knows what type of motherboard that is installed on the computer of L10 - 108?

  Thank you!
  / Martin

  Hi Martin

  I put t think that it is possible to find this kind of information somewhere because this kind of information is Service partner. I found a site with lots of pieces of hardware for Toshiba laptops. You can check http://www.sparepartswarehouse.com/Toshiba, Laptop, Parts.aspx

• Satellite L10-108 is no longer available?

  Hello
  I ordered a Toshiba Satellite L10-108 in the Netherlands a few days ago. I just got an email that is not deliverable more, so I would check how long he was gone, because he is still on the site...
  Greetings,
  HBronsveld

  Hello Hans,.

  Certainly, the L10-108 is not listed on the web site of Toshiba UK.

  Kind regards

• Linux and L10 - 108

  I have a laptop of L10 - 108, and I want to install linux on it for work play with it. is this possible? will be compatible with Lunx drivers?

  Hello

  Toshiba does not officially support Linux for its laptops, but if you do a bit of diging on the net, you will find groups of users who provide help and support for the drivers.

  Nick

• Satellite L10-108. Spesifications module memory.

  I'm going to upgrade memory on my girlfriends L10-108 of 256 to 512 MB. Could someone please send the correct memory spesifications? This module is correct: http://www.komplett.no/k/ki.asp?sku=112684?

  Thanks in advance guys
  Just

  Hello

  The fact is that you can upgrade the memory to 1024 MB max.
  You can use max 2x512MB DDR memory modules.
  I studied a bit on the net and found information that these modules are compatible:

  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)

  It will be useful.

• USB problem-"USB device not recognized".

  Original title: USB problem

  I have a problem when I connect my nokia mobile to my pc via USB cable there is a display of msg of error "USB device not recognized.how to solve this problem? I tried all reboot pc, reconnect the device, format XP and reinstall.last night I was using a mobile navigation correctly with the same device same system same cable.i have tried driver re install but not fixed yet.i have Windows XP 3 intel p4.please help.

  Hello

  1. Are you having the same problem if you connect a drive flash or any other device?
  2. Have you tried plugging in Nokia mobile on another computer?
  3. Have you tried plugging it into different USB ports?

  I suggest you send more information to help you better.

  You can also refer to:

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive.

  http://support.Microsoft.com/kb/925196

  USB port may stop working after you remove or insert a USB device.

  http://support.Microsoft.com/kb/817900

  .

• WIFI WLan on my L10 - 108

  Hello

  I just bought a 108 L10 laptop, but want to put in a Mini - PCI WLAN card. The problem is: I do not see the antenna cables in the mini-PCI slot. A few questions:

  -Which Mini-PCI card to use? Each brand is possible?

  -What should I check when buying one?

  -Can I build it myself in an aerial cable (s)? (there are Mini-PCI cards on the market with cables)

  -Otherwise, I can use a Mini-PCI card without when I use it in the neighborhood of the WIFI router?

  Thanks in advance!

  Emile

  Hello, Emile

  As much as I know your device isn't ready for Mini - PCI WLAN card. In my opinion the best solution for you is the PCMCIA wireless card. Installation is very easy, and after configuration, you can drag the data to the neighborhood. ;)

• Tecra W50 - A Replicator III, Audio USB problem

  Hello

  I use a port replicator (Toshiba HI SPEED PORT REPLICATOR III PA5117E-1PRP) with a Toshiba Tecra W50 - A with Windows 7 (64-bit).

  I need to use the audio input to speaker and microphone on the Replicator, but no sound is coming or in.

  When I anchor my port replicator (Toshiba HI SPEED PORT REPLICATOR III PA5117E-1PRP), then an unknown device appears in the Device Manager with then the Advanced USB Audio Driver name.

  I was unable to find a driver on the support pages.

  Can someone direct me to the appropriate download area please?

  Help is very appreciated.

  Concerning
  Christian

  Hello

  It is very interesting how Toshiba cares about the problems of their users.
  I think this is the last time I bought some stuff from them.
  Maybe I'll go back to DELL. They care more.
  My post will be probably deleted now...

  Christian

• Toshiba satellite pro m30 USB problem

  I have toshiba satellite pro m30 and HP scanjet 4600 scanner.when I connect the scanner directly to the notebok with its ' original usb cable there is no problem. But if I connect the scanner to the laptop with a laptop usb extension cable cannot initialize the scanner. There is no problem if I connect the scanner to the VAIO laptop with usb extension cable. What can I do?

  Hello

  could you describe the difference between the original USB cable and the USB extension cable?

  The laptop and the printer works correctly with the original USB cable, but it seems that the extension USB cable is an inexpensive which does not fulfill the technical specifications and the laptop has a problem with this issue.

  To solve the problem in my opinion you could do an update of the BIOS, look if for your printer is a new driver available and reinstall the USB drivers.

  Also, you could test whether USB, the same problem occurs with other cables.

  Bye Bob

• Portage Z30-A-13W connected to the high speed Port Replicator III - USB problems

  Hi all.

  We recently bought a new Portage Z30-A-13W and Hi-Speed Port Replicator III.
  Setting network and graphics work correctly with port replicator, but the USB ports don't work at all.

  I tried the port replicator USB 2.0 and USB 3.0 and I can't seem to work with a keyboard, mouse, USB key or a mobile phone.

  In the case of mobile phones, it is also no output power of the ports that the mobile does not start to load.

  At any one another experianced this problem and what was the resolution.

  Thank you very much

  Jonathan Davies

  Hello

  As far as I know additional drivers are not really needed to use the USB ports.
  This is why I m wondering why don t USB ports work.

  It might be possible that ports high speed Port Replicator III USB are faulty, but to be honest, I can't imagine that all 6 USB ports may bad work at the same time.

  So maybe it s a software problem.
  First of all, I would recommend the default BIOS and check the USB legacy support for keyboard and mouse could be activated.
  After access to the Device Manager and remove / delete the USB hubs and controllers in the list of devices.

  Keep high speed Port Replicator III connected to the computer and restart the device.
  Usually, the system should recognize automatically deleted USB ports and must update the drivers of USB ports.

  I hope that the USB ports don't work after this short workaround solution.
  Keep your fingers crossed.

• Satellite A500-1 - latency USB problem

  Hi all.

  I have problems with my USB latency. It doesn't matter what I've done in the audio interface. He returned always dropouts.

  Help, please

  Hello

  What are the USB devices connect exactly?
  This happens only with connected devices or on internal speakers too?

  Are you running the factory settings? With these settings, it should work fine and also check that this latest version of the BIOS is installed.

• Sound and USB problems on a P10-221

  Hello! I am Portuguese and I do not write well.

  I have a problem with my bluetooth after installing Windows Service Pack 2 and an update of the Bios.

  I installed the Version 1.90, after activation of my bluetooth, laptop computer closed down.

  After restarting the laptop, the usb connections and the sounds have disappeared, what can I do?

  The laptop is a Satellite P10-221

  [Edited by: moderation of the Forum]

  Hello

  In a first step, I would re - install the drivers for the chipset for your laptop.

  After that uninstall the battery Bluetooth and re - install also.

  There is also an information sheet available online to get information on the new drivers for Service Pack 2. Watch http://eu.computers.toshiba-europe.com

  Free configuration (4.90.57) and PC (3.0.6) Diagnostic tool are available for users of Windows XP Service 2.

  Take a look at http://eu.computers.toshiba-europe.com to get updates for download.

  Keep me informed of your results

  Good bye

• Tecra A11 & Express Port Replicator II - USB problems

  Hello

  I'm having a problem with a port replicator that I simple couldn't have resolved for months. I'll try to explain this as best I can.

  We have a Tecra A11, which seems to work fine running on Windows 7 Professional. When the Tecra A11 is pluged in an Express Port Replicator 2, not USB ports in the port replicator's work at all. Very good cell phone fees and the LAN switches on the replicator fine, but the USB ports simly does not work under any circumstances. It would also be interesting to note that the green light next to the "eject" button lights never really.

  I downloaded and installed the latest series driver for Windows 7 from the Toshiba support page which has no effect. We had 2 replacements for Toshiba because they also agreed that the previous, we had were not woring correctly, but this obviously was not the case because we still have the same problem with our 3rd unit. The Tecra A11 was sent back to Toshiba with case notes clearly describing the question, and he was sent to us "no fault found".

  Unfortunately, we don't have any other laptops to test on the port replicator. but I'm seriously suspect that the problem lies in the laptop, rather than the port replicator. For any idea or suggestion will be greatly appreciated.

  Kind regards

  Steve.

  Hello

  According to your message, you are not sure if the problem is related to the defective laptop Tecra or express port replicator.
  Hmm theoretically the problem might be related to defective express port replicator or Tecra.

  If found some information on the USB ports and the repliators port:

  + Make sure that the element of Legacy USB in the BIOS emulation is set to "Enabled". This feature only works for the keyboard and mouse. Also note that the keyboard and mouse must be connected before you start the computer. A USB mouse, keyboard or the floppy drive connected to the Port Replicator via any other connection that a hub of the first level, will not work until the operating system has started. +

  I also recommend to check the version of the BIOS; If the most recent BIOS is available, then you need to update this

• Import music from iTunes to USB problems

  I have the music list in iTunes.

  I click computer to display the drive where is my USB.

  As soon as I click on the music track to hang out everywhere, the window of the computer closes!

  Can someone let me know where I am going wrong please!

  I managed to solve my problem.

  I struggled making the iTunes screen smaller to get a screen divided, but I did it, it now and transferred all music.