HOWTO for WAP54G remote reboot?

Similar Questions

• What are the network requirements for the remote server of the Panel?

  What are the network requirements for the remote server of the Panel?

  I tried for awhile now to set up a Control Board.  I can connect to my remote panel of computers from other computers on my local network but nowhere else.

  Whenever I use web publishing tool gives me a URL in this format: Http://Computer-Name.Corporate-Name.local:8086 / VI - nom.html apparently it means I have a local DNS server and this URL is meaningless to the public.

  When I try to connect with the Operate > Connect to... remote control, I get this error message:

  "Connection to Server remote panel...".
  "Connection refused by the server remote control specified: make sure that the LabVIEW Web server is enabled on the specified server.

  I got the same error when I tried to host a remote panel from my laptop at home, on my Wi - Fi.  Is there some network settings or firewall I'm not seting?  Would it be my server or the router or the private network?

  My goal is to be able to host remote panels of my laptop while I'm on the international scene, creating using 4 G internet mobile.  Is it still feasible?

  As he Turners on my router had to be put in place so that my Port is in the rage of transfer.  Also I had to disable DHCP.  Without that you cannot host behind a router.

  These are the instructions I put fallow:http://digital.ni.com/public.nsf/allkb/B1E9A3D78BAED949862573AD0065D4D2

• DMA between host and target FPGA is not supported for this remote system.

  I try to cover with my FPGA (on the cRIO-9002) of the RTO.  I have install upward of anOpen good VI reference without error, but as soon I try to access thefifo I error-63001 and the attached message wrote:

  Error-63001 occurredat reference FPGA VI opened in the target - multi rate - variables - fileIO_old.vi

  Possible reasons:

  NOR-RIO FPGACommunications framework: (Hex 0xFFFF09E7) DMA from the host to the FPGA targetis not supported for this remote system. Another method for controller of e/s or climatiqueLes associated with the FPGA target.

  What other I/O optionsdo I need to move the data asynchronously to the RTO for the FPGA. I have triedcreating memory, but it seems that I can't write to the memory of the RTOSside.

  We have also a 9012sitting around will using this cRIO rather solve this problem.

  I'm very very greenwhen it comes to LabView, so I apologize if this is an easy question.

  As stated in the readme of the driver NOR-RIO, DMA is not taken in charge from the host to the FPGA on the cRIO-900 x series. The cRIO-901 x supports DMA transfers between host and FPGA and FPGA to host all the cRIO-900 x series controllers only support transfers the FPGA host DMA. As a result, LabVIEW returns an error if you try to transfer using DMA controller for cRIO-900 x.

  The 9012 looks like the ideal solution, you are very lucky to have additional hardware laying around

• Power supply for WAP54G V3

  Hi, I was wondering if someone could help me identify the specifications of supply of power for a WAP54G V3.  I searched high and low on the Net, and there seems to be a lot of conflicting info.  I found the specs for a WAP54G V3.1, but I have the plain V3, so I don't know if it's the same thing or if it requires different specifications.  If anyone out there has a V3, could you check your card and reporting?  Thank you!!!

  Jonathan

  I have a true Linksys PSU for WAP54G in my hand.

  Model: 12100SA

  Input: 240v 50 Hz 110mA

  Output: 12VDC 1000mA

  Made in China

  Given consumption a WAP54G is 6W (500mA @ 12VDC) power supply 500mA would be 100% operational at all times. It doesn't take a genius to likely scenarios (problems)

  12VDC @ 1a (1000mA) is your solution.

  Concerning

  Fred

• Do need me a separate license for VMware vCenter Server Heartbeat for a remote SQL Server database?

  Do need me a separate license for VMware vCenter Server Heartbeat for a remote SQL Server database?

  Only a single vCenter Server Heartbeat license is necessary to protect the components of the vCenter Server installed remotely, including SQL Server. A single license is also used for several UNIQUE for vCenter Server services protected authentication servers. A license is required per instance of vCenter Server.

• For the remote controls of the Keynote?

  I want to use a remote control for a presentation in Keynote, I'll give.  It will be my first with a remote control, but which is later - should I buy a (If Yes, who?) or what is the last and the best app for me to use my iPhone as a remote control (which I prefer, a gadget to lose less!)?

  Please use a simple language with me, a digital native.

  I use my aging MacBook Pro with OSX 10.7.5, my speech is 5.1.1 and my iPhone is a 6s.

  Thank you!

  Using a method rather than another is a personal preference, my preference as a coach and lecturer working in several different locations is to use Keynote for iOS, it has built in the remote control feature:

  Tap to go to the next slide

  previous slide scanning

  Pen tool marker on the screen

  the highlighter to screen

  the iPad displays the screen of the presenter, showing the next slide and notes of the speaker of the presentation on the Mac

  

  There must be a wifi network present, you can connect; many businesses teaching institutions lock unregistered users by default

  The site Web of Keynote iOS is here: Keynote for iOS

• What software to use on Presario V3918 for XP remote control?

  Hello everybody, my problem is, I've downgraded successfully to XP my presario V3918. Everything works ok, but last week I received a remote from tx1330 Pavilion. This remote works on my machine, but its function is reduced, because I can use only a few buttons. For example, keys windows media center and DVD are useless on XP. Is it possible to do their job? The editable functions button or something?

  Also, I wanted to ask why my microphone does not work on XP, my audio device is detected as Conexant HD audio, but I can't activate the microphone in the volume control because the option is not available.

  Hope someone can help me with this, sorry for my English. Thank you.

  Hi Lil-k

  The remote control driver was built HP Quick Launch Buttons.

  I have had no experience with tx1330 remote control, but I can assure you that it works with remote dv2000, dv6000 and dv9000.

  .NET framework (before quick launch)

  here: http://tinyurl.com/758p8

  HP Quick Launch buttons

  here: ftp://ftp.hp.com/pub/softpaq/sp40001-40500/sp40139.exe

  Uninstall the current sound driver, install an updated driver the below:

  Conexant SmartAudio 221

  here: http://www.mediafire.com/?dg0cmmkm4y4

  Use it for audio. Unzip in a folder. Run the Setup program.

  If it errors use Device Manager.

  In Device Manager, right click "Audio Device on HD", choose Update driver, not to communicate.

  Install from a list or a specific location, select do not search.

  I will choose the driver to install,

  For the hardware Type select 'show all devices '.

  Remove control "Show compatible hardware" and click on 'disk '.

  Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".

  Ignore XP when it complains.

  Reset.

  I got V3700 series and it work very smooth with XP.

  Message edited by Mariza on 22/11/2008 20:25

• Where can I get the cover of the batteries for the remote control Sony NSG - MR1?

  We have missed placed our battery cover for the NSG - MR1 remote for the Internet/Blue Ray player. Where can I get this part alone?

  You can contact an authorized Sony part distributors to check if the lid is available for purchase. Here is their contact information.

  Andrews Electronics Inc.
  661-257-7700.
  www.andrewselectronics.com

  Encompass parts Distribution
  800-638-3328.
  www.encompassparts.com

  Fox International
  440-725-7150.
  www.Fox-international.com

  If my post answered your question, please mark it as an "accepted Solution".

• 5530 envy: envy 5530 is not scanning for available remote

  REC would help chat of HP who accessed remotely to my system when it wouldn't print now, citing wireless internet connection.  Now it prints wireless just like the printer was new, but I can't scan wireless as I could before.  I must now be attached with USB and the printer display "the computer does not respond. check the USB connection.  the stupidest part of this is that I could always scan with the USB.  I'm lost!  the HP agent removed the original icon of jealousy and it is now replaced with an icon that says "class series 5530 envy."

  Hello @Mommommary and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have problems with scanning. I would like to help!

  I would recommend starting with a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I recommend also to download and run the HP print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• do you need additional licenses for a remote domain on a SBS 2008 domain controller

  I have a SBS 2008 domain. We have a remote desktop through a vpn, we would like to set up a domain controller for performance reasons. It was my understanding that SBS authorized licenses for the servers to be added free of charge? Is this true for an additional domain controller?

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Power supply for WAP54g v.2?

  Somehow, the power adapter AC for my v.2 WAP54g Access Point was lost among a few other power adapters, and now I don't know who is who. Can someone tell me which would be the right one? There are several brands of adapters that output 12 volts DC with various outputs of the amplifier... 1. 0 a, 1. 25 a, 800ma, 700ma... who is who? Thanks for any help.

  Dan

  The original adapter for a WAP54G should be 12VDC @ 1a (1000ma).

  The current can be greater than 1.

  Concerning

  Fred

• no backup for WAP54G?

  I just finished to save my configs for my 2 WRT54GLs and, when I tried to do the same thing for my WAP54G, it seems that this option is not available. Any reason why we can't save the State of the WAP configuration in a file?

  Thank you

  Paul

  On the Administration tab, you have the option to backup and restore, you can use it to backup your Access Point settings...

• Unable to connect an adapter of TWC DCI401TWC2 with Windows Media Center as there is no option for IR remote IR connection

  I'm trying to install a digital Time Warner Cable DCI401TWC2 adapter model to work with media center.

  I can get to the extent where Setup search an IR connection, but there is no IR function with the above model

  and I can't go any further.

  I can see the image on the screen before the IR login screen using channel 3.

  Is it possible that I can install the Media Center works with the adapter object without it

  I'm looking for an IR connection.

  I use Windows 7.

  I've lived other messages on this forum dealing with this same problem, including the fix "hava" (which is not

  seems that there are more) but nothing seemed that it would help.

  Thanks for any help you can provide.

  Robert

  (Moved to programs)

  I went on the 'greenbutton' forum as suggested and was able to watch TV on Media Center remote for Time Warner box.

  The volume, for some reason, is not very strong and I am unable to use the guide in Media Center.

  I had to go through the configuration of 'antenna' of MC to accomplish this and not "cable."

  Thanks for the help.

  Robert

• How to open life cam studio for a remote desktop?

  in my holiday home, have windows 7 pro with installed microsoft life cam. This computer is remote access enabled.

  Since my home computer, I can access my house OK computer, but cannot open my cam life.  Get a message "no camera installed.

  How can I access my life cam and the studio for my computer?

  c

  Hi seejoe,
  Take a look at the faq:
  Remote Desktop connection
  B Eddie

• What for VAC + - remote PCI slot?

  Is it possible to understand * remotely * which slit in a PIX-535 has the VAC + installed? Or for that matter, the cards which FE/GE settled in exactly what slots? (' hard 'and' sh sh to ' simply list the cards in order during startup.)

  Sorry, but no, you can't say that without looking at the camera.