HP 110-210el - second DVD

Similar Questions

• Need to add a second DVD disc

  I need to add a second DVD drive in HP p6243w my wife

  see dvd installed in SATA1

  hard disk on SATA0

  The new dvd player will connect to SATA2 or SATA3.

  Thank you

  It doesn't really matter the CD/DVD drive is connected to SATA port. I normally connect hard drives to the lower numbered ports and CD/DVD players in the higher numbered ports. I would be in your particular configuration, connect the hard drive to SATAO, primary CD/DVD in SATA2 and SATA3 secondary CD/DVD player.

• Is there guidance on the installation of a second DVD player on the p6280t Pavilion?

  I would like to install a second DVD player in my PC, but because most DVD players have their own door opening, like the PC, should I buy a HP drive, or there at - there a way to disable the built in door?  Are there written policies of this?  I have installed additional disks on other computers, but none of them had built in door and built-in open button.  Thank you.  Mike

  Here are the specifications and factory configurable options for your desktop HP Pavilion p6280t CTO. Please consult this guide HP titled "adding or replacing a CD or a DVD player. Just follow the instructions in the guide mentioned above and place the new drive into the open slot. Any SATA optical drive with a load of 'plateau' should work fine. The houses of coverage, two drive doors get opened by the drive platters and the external release buttons press the eject button on the actual readers.

  Please send Bravo

• I want to add a second DVD/CD drive

  I have a new Dell SPA 8700 and want to add a second DVD/CD. What should I look for? Thank you, Bob

  MagicBob

  I have a new Dell SPA 8700 and want to add a second DVD/CD. What should I look for? Thank you, Bob

   
  Need you a 5.25 "SATA DVD - ROM, similar to readers shown here:
   
  http://www.Newegg.com/product/product.aspx?item=N82E16827106393
   
  Also you will need a SATA data cable, there should be a SATA power connector spare already inside the case for extra DVD player.
   
  http://www.Newegg.com/product/product.aspx?item=N82E16812123282
   
  In addition, 2 x M3 x inches 1/4 long Hex head screws, to mount the drive.
   
  http://www.Newegg.com/product/product.aspx?item=N82E16811989012&cm_re=screws_kit-_-11-989-012-_-product
   
  Procedures to help install the reader [see pages 45/46] are here:
   
   http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_xps_desktop/XPS-8700_Owner%27s%20Manual_en-us.PDF
  
  Bev.
   
   
   
   
   
   
   

• Second DVD player not recognized

  I installed a second DVD disc in a precision T3400 desktop.  The device is powered and the drawer opens and closes, but it is not recognized by the system.

  Is there a particular sequence to connect the SATA cable on the motherboard?

  Even with 2 identical DVD drives, the system is unable to distinguish them?  I can't find a solution in the user manual.

  Thank you

  Message edited by mwalimu2 on 07/26/2008 14:45
  
  

• Second dvd burning

  How can I easily burn a second dvd from a project several days after the first fire... Pinnacle has offered the option of burning a file created previously - elements does not appear as an option and disappears in the tedious process of coding etc - even if it seems to have concocted files at the first burn and stored on pc. It woul dsave much time - currently after 21 minutes only 45% complete - Avchd-7 gb...

  grantham8

  Please specify.

  Hunt seems to speak your question as if you were doing your Premiere Elements burn on a DVD-VIDEO disc to DVD disc.

  On the contrary, you wrote

  It woul dsave much time - currently after 21 minutes only 45% complete - Avchd-7 gb...

  Seems to me you do the Premiere Elements burn AVCHD to DVD disc format. Is this correct?

  The counterpart of the AVCHD of hunting as explained for DVD-VIDEO disk DVD's to burn first AVCHD items to the folder for

  The BDMV folder and then take that to AVCHD format on a DVD disc or Blu - ray disc in the ImgBurn program. If this is the case, the part of

  ImgBurn experience is to get the updated format the disk with the correct disk file system. ImgBurn is a lot of help in this

  respect, but you want to double check his choice to avoid problems of disc.

  Make an exact copy of the original disc using the software that came with your burner would be a viable option for you?

  If please see and let us know the result.

  Thank you.

  RTA

• Second DVD audio/video player jerky

  I've searched the forums and not found this... so if I forgot, sorry.

  Recently, I added a second DVD player to a desktop Dimension 4700.  The original works fine, the jerky added a video and audio gives.  I tried everything, including the BIOS updates, and nothing works.  I know that the second disc (slave, the original is set to master) is OK, as I've used in a Dimension 4600 (as a master drive and a slave drive) with no problems.  In addition, I swapped the drives (master and slave) and the problem follows the drive slave... so I know that the drive is not the problem.  I also tried this with Cable Select... same results.  When I look at the settings in Device Manager, it reflects "two" primary IDE channels, and I expected a primary and a secondary.  In addition, it shows the second "primary IDE channel" like PIO transfer mode rather DMA, so I suspect this is related to my problem.  If I install a CD drive as a second drive, everything looks and works as expected.  It seems to be only a problem when I install a second DVD player.

  Someone at - it entry to this question?  I'll buy you a virtual bottle of the finest wine available if you help me to solve!

  Ron

  
  

• Satellite L505-110 BD-ROM, DVD - RW became

  Hello, I have a Toshiba Satellite laptop 505-110.
  After that I recovered my laptop Toshiba Recovery, converted to a DVD - RW BD - ROM and I can't watch movies BR since then.

  What should I do?

  Hello

  You really have a Blue-ray player?

  As far as I know the laptop was equipped with a simple DVD super multi drive.
  Yes CD-R(read/write), CD-RW(read/re-write), DVD - R Carbon SL, DL (read/write), DVD-RW(read/write), DVD + R Carbon SL, DL (read/write), DVD + RW(read/write), DVD-RAM(read/write), CD-ROM, DVD - ROM are supported

• a second dvd player for the G3620

  I need to install a dvd player for my G3620 in the second Bay.  There's a metal fence (just behind the door at the front of the box) which must be removed to open the Bay.  Y at - it something to remove the metal grill?  Force at, or is there and easy way (course)?  I don't want to break anything.

  Thanks for your help!

  I figured out how to do this. I created a procedure in pictures at the following YouTube, location including:

  http://www.YouTube.com/watch?v=c2NyGgwkVOA&feature=youtu.be

• Adding second DVD - Rom SATA HP Pavilion with only 2 SATA power connectors.

  Try to add a second SATA DVD Rom but do not see more SATA power connectors?  I tried to discuss with Tech, desperate!  Don't understand.  The system came with a SATA hard drive and a SATA DVD/BlueRay so both SATA power connectors are used.  I do not see another SATA power connector in the system, but there are at least 2 connectors SATA DATA more on the system board.  You can even add the old style DVD of as the connectors on the system board do not exsist for the old style DVD ROM.  What they do a converter to SATA power adapter or am I missing something?  Strange.

  If there is not a spare SATA power connection, maybe sometjhing like this would help:

  http://www.satacables.com/HTML/Molex-to-SATA-power-15-pin-ADA.html

• 110 - 000z: CD/DVD do not work.

  My CD/DVD drive on my pc, do not play. When I put a dvd, a pop up screen and the microsoft store appears. my pc is Windows 10. Device Manager displays the CD-ROM/DVD-Rom drives. How can I make it work with to pay for it.

  Hello

  Because Windows 10 do not have good DVD player and believe it or not you have to buy Microsoft (free for a limited time):

  http://Windows.Microsoft.com/en-AU/Windows-10/Windows-DVD-player

  You upgrade/downgrade your computer? For 10 pre-installed Windows, your machine must have a player called CyberLink Media Player (or similar name) software. You can use it to play otherwise, please use the following free media player, it will play almost all video formats.

  http://www.videolan.org/VLC/download-Windows.html

  Kind regards.

• Can H8 - 1360t I add a second DVD with lightscribe support? How do I know: compatibility

  Windows 7 new h8 - 1360t a blu ray player I want to add a 2nd dvd with lightscribe support player.  Which 1 is compatible?

  Hello

  It is a machine CTO, he has 2 bays ODD, you can configure to order something as one of them:

  Primary optical drive

  Must select one of the following options: DVD SuperMulti burner

• power cable for the second in p6280t dvd player

  I installed a second dvd drive in my hp p6280t.  It came with a SATA cable, so it's no problem.  However, HP instructions State, "connect the data and cables to the back of the unit of energy...» "Problem - I can not find a power cable to plug into the second disc.  Can anyone help?  Thank you.  Mike

  Mike,

  All you need is an adapter (delivery free $2.29).

• Creation of DVD of Vista freezes when you save a second copy

  Created a few hockey using Movie Maker 6 videos and published for Windows DVD Maker.

  The first DVD Burns fine and spits out the DVD and asks if you want to make a second copy. Click here to confirm in a new DVD and wholla... do not put anything!

  A dialog box is open: "Burning (E :) - 0,0%).

  "Creation Creation of DVD, please wait...". »

  and "preparing..." 0,0% ", but after an hour, you give up a little.

  I re - publish the movie and get the second DVD, but again not copy! I'm on my 5th re - post...

  The Task Manager shows that the program is running (very good); the program seems just waiting for something. Opening and reinstalling a new DVDs do not trigger to operate. (and I am able to use the same blank DVD when I re - publish).

  I use Windows Vista Home Premium (x 86) with the included MM6 and creating DVDs. Updates windows, DVD player, NVIDIA graphics card (if even there) and Dell are all up to date.

  Three teams - 14 children in each team, with four separate total DVD and encoding takes approximately 1 hour per disk, Ouch! (providing the blank DVDs are without error)

  Help!

  Hello Rkamjm,

  Thank you for using the Microsoft Windows Vista Forums.  In my view, the issue could be with the codecs and the following steps should help.

  Select Options on the Tools menu, and then return to the Compatibility tab. From there on, remove the check marks in each box. Restart Windows Movie Maker.   See if this will allow you to make a second copy with no problems.  Please let me know if this helped, or if you're still having problems.  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Adding second drive of DVD to H8-1234.

  The H8-1234 has an open slot and a power connector of alternatives for adding a second DVD player.  However, the existing SATA cable has only one connector. HP offers a cable two connector? Can I use a SATA cable two connectors "generic"?  Finally, the H8-1234 will work with a second DVD disc?  Thank you.

  Here are the specifications of your desktop HP Pavilion HPE h8-1234. According to specifications, your system has six (6) SATA connectors on the motherboard. Unlike the IDE/PATA, SATA supports only one device per cable. Install another CD/DVD/BluRay drive will require you to buy another SATA data cable to make it work. And YES, the computer will function normally with a second optical drive installed.