HP 15-G221AU: driver USB problem solved in laptop 15-G221AU.

Similar Questions

• See 4 and VM Windows 7 x 64: driver USB problem

  The agent installation fails because it cannot install the USB driver.

  Where is the problem?

  
  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

  Anton,

  Desktop 64-bit are not supported for view 4.0. Please see http://www.vmware.com/pdf/view40_admin_guide.pdf for the full list of desktop operating systems.

  Mike

  (Apologies for the exact same about three threads)

• problem with driver usb controller pavilion g7

  I need driver usb controller pavilion laptop g7

  PCI\VEN_184B103C & REV_03\3 & 2411E6FE & 1 & 80

  PCI\VEN_184B103C & REV_03\3 & 2411E6FE, 1 & 81

  Hello:

  You must install the AMD chipset driver and reboot.

  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

• Equium A60-191: which driver should I solve software problems

  Updates MicroSoft screwed up my OS and I had to get it reinstalled. When it has been reinstalled, I had to reinstall XP as I had no BONES at all. This means that has been reinstalled XP with SP2. Other nearby things I lost all the registry entries for the software on the laptop - despite the fact that the HD has not been deleted data or programs. Although my data are listed under other 'user '.

  A number of drivers have been "lost" and I don't have Toshiba recovery disc (s). That's why I was download the 'obvious' drivers missing. However, some things do not - work as no notification of the battery status in the system tray.

  Neither the Fn keys working.

  It has been suggested that some of the things Toshiba must be downloaded before SP2... If so, how can I sort this problem please?

  It is not clear what drivers on the drivers Equium page are those which are necessary and in some cases, an insufficient description is given: for those of us who are not wise wordly on computers. So unless I can tell that something is missing for example I discovered with my modem - I don't know what I need and what I don't.

  If anybody out there can help with suggestions for what software/drivers, that I need to fix this box or how to get around the order of driver download problems, I would be very grateful.

  Thanks for looking

  Hello

  I just recommend to install ATI Chipset + Display Driver V6.14.10.6430 as a first step, before you start to install the other stuff listed. As written Jasmine make sure that you have installed all the Toshiba designed the tools and utilities in the correct order. I think that all the FN functions will not work correctly.

• Satellite A30-514: no driver USB

  Hello, first post here so be gentle please...

  Just re-formatted your laptop Satellite of friends as he managed to corrupt the windows, but we have not formatted to a non-original disc so no drivers etc - my problem is the USB driver. I'm using this link USB Driver
  Microsoft Windows 2000 5.1.2600 support page, but I cannot get his execution.

  When I click on it or run I get a set of icons, but none of them are setup etc., and when I click on the icons of all kinds of strange data appear.

  To sum up: no driver USB; has got the folder but cannot run files - help me please :-)

  Thanks - Mamoun

  Post edited by: Mamoun

  Found http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=ex&bbid=bb55&url=& dialogid = 11350459 & stateId = 1% 200% 2011352178 on the forum here and it works - thank you. BB

  Hello

  Thanks for the information and it is nice that you have solved the problem.

  PS: Welcome to our community ;)
  Good bye

• USB problem-"USB device not recognized".

  Original title: USB problem

  I have a problem when I connect my nokia mobile to my pc via USB cable there is a display of msg of error "USB device not recognized.how to solve this problem? I tried all reboot pc, reconnect the device, format XP and reinstall.last night I was using a mobile navigation correctly with the same device same system same cable.i have tried driver re install but not fixed yet.i have Windows XP 3 intel p4.please help.

  Hello

  1. Are you having the same problem if you connect a drive flash or any other device?
  2. Have you tried plugging in Nokia mobile on another computer?
  3. Have you tried plugging it into different USB ports?

  I suggest you send more information to help you better.

  You can also refer to:

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive.

  http://support.Microsoft.com/kb/925196

  USB port may stop working after you remove or insert a USB device.

  http://support.Microsoft.com/kb/817900

  .

• Printer USB problem. Help, please

  Hi all
  My Win XP SP3 suddenly developed an error when I try to print: failure of the Document to print - communication error with the printer.
  Canaon printer - Pixma MP 610 - is 6 months old who until then worked very well.
  Panel displays printer as Offline as a default state. Right click and selecting put printer online do so much and then it is listed as ready but still does not print.
  The following does not help:
  Printer off/on switching voltage
  Unplugging and reconnecting USB cable windows says new hardware detected but it it lists as material not recognized. Try to install the driver of the .inf - windows says no driver found which is compatible with this unit.
  Restart the computer
  unintalling / reinstall drivers - printer is listed but grayed out as default in offline mode.
  does not print BACK or any Notepad program Inc.
  Went and bought the new printer and new wasted money - same problem - hardware not recognized - USB cable.
  Printers are good and works very well when it is connected to the other comps.
  Tried the fix to MS site http://hotfixv4.microsoft.com/Windows%20XP/sp3/Fix144808/2600/free/226205_ENU_i386_zip.exe) - no help.
  In manager\hardware - listed as device not recognized - printer device refuses to update driver as said earlier, even through the .inf file
  In the printer properties verified that USB is not going into sleep mode - without help.
  Activated: Services\PrintSpooler - Running - restart - no help.
  Edited register: 'Create a new registry value that prevents an OHCI controller to enter a suspended state' - help
  ALSO; computer does not recognize now of any memory stick when connected USB
  USB only sees the mouse and a card reader.
  All USB hubs are listed as working normally in yellow device manager-no icons anywhere Device Manager.
  All windows update drivers are up to date.
  Help me please if you can I am at my wits end.
  Thank you United Nations advance regards
  Bayan

  Bayan,
  Hi, the same thing happened to me last Friday, 20 November.

  the differences are:-
  1. I use HP 7590 printer;  and
  2. the poster as "Unknown device" and that no driver usb device is loaded...

  You solved the problem?
  Thank you
  Ursula

  JohnKelly46 had the answer - he said to unplug the computer's power supply. He said you have to unplug the notch decision-making and wall. [just turns off the computer is not enough.  Wait a few minutes. Then, connect the power supply to the computer.  Once windows started, everything reinstalled one by one.

  ... see pls detailed response from John to wire "USB drive is not accessible"

• driver usb MTP device install Dungeon Tomb crashes when I try to connect my Toshiba at200 tablet to my PC Windows 7

  driver usb MTP device install Dungeon Tomb crashes when I try to connect my Toshiba at200 tablet to my PC Windows 7. All attempts to solve this problem have failed.

  Hello

  Welcome to the Microsoft community. According to the problem description installation keeps failing mtp USB device driver.

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         Have what troubleshooting measures you tried?

  I'll help you with this problem. I suggest you follow the steps in the article.

  Tips for solving common driver problems

  I hope this helps. Let us know if you need help with windows.

• External hard drive USB on Time Capsule

  Hello

  I have an external USB hard disk and plug it into the USB port of my Airport Time Capsule makes it accessible wireless (if on the sidebar of the window under the section 'sharing' I click on the Time Capsule to enter airport name next to his record 'data', I also have a folder with the name of my USB HD and I can access).

  Now the problem. I have a USB external hard drive, I can access normally connect my iMac or iBook portUSB one, but, if connected to the time Capsule... nothing happens.

  So there must be a difference in the two external hard drive. What a difference creates the problem, why and what I can do is my question.

  Can someone help me?

  So far, here is what I found to be the similarities and differences:

  The two serial ATA, 2 to, partition GUID mapped external USB hard drive.

  In disk utility, one that is visible on the Time Capsule is displayed as 'external HARD disk support' physical disk with OS X extended physical volume. One who isn't appears as physical disk 'external media' with logic extended OS X volume.

  TX

  Hi Ranmaboy,

  I understand you have two external hard drives USB that you want to connect to your airport Time Capsule via USB, but one who is not recognized by the Capsule from the airport. Given that this player connects to your iMac without problem, I would recommend that you backup all data stored on the disk, and then follow the steps here to re - format the drive using disk utility:

  Backup disks, you can use with Time Machine - Apple Support

  Format a drive connected to an AirPort Extreme 802.11ac or Time Capsule

  If you are using an AirPort Extreme 802.11ac or Time Capsule, you can connect an external drive to the USB port on these devices for use with Time Machine. Follow these steps to reformat the hard disk in the first place, it is ready for use.

  1. Connect the hard drive to a USB port on your Mac.
  2. Open disk utility.
  3. On the left side of the disk utility window, select your external drive (or one of its partitions).
  4. Click the delete or delete button on the toolbar.
  5. On the Format menu, choose Mac OS extended (journaled).
  6. Type a name for your drive, and then click clear.
  7. After that the drive is deleted, close the disk utility window.

  Once the disk has been reformatted, try to connect this back to the airport Time Capsule to see if it is now recognized.

  Have a great rest of your day!

• New driver USB on my laptop Portege of loading

  I have problems with a site I subscribe to who went through an upgrade.

  The website said that the problems were because he was a blocker adware on the cell, preventing the load correctly the site.

  I deleted all suspicious looking for programs, and although the site now works perfectly when I go to eject a USB device instead of seeing the listed devices I see...

  To work around this, I tried to reload the driver USB from Toshiba, but I get the following message:

  A later version of Renesas Electronics USB 3.0 host controller driver is already installed on the machine.
  The implementation cannot continue.

  I need to remove the driver completely then re - install?

  > when I go to eject a USB device instead of seeing the devices listed, I see...

  I'm afraid that your message isn't clear enough of m.
  What problems do you have exactly with USB ports?
  You can use all the USB devices connected to USB ports?

  What Portege laptop and how Windows system you have exactly?

  The USB driver that you found seems to be already installed on your laptop and the new facility isn't necessary.

  However, please answer my questions above for more information on the issue.

• Mini Toshiba external driver.usb 2.0

  I bought a mini PC 7 android.
  I also bought a mini external pilot, when I put the USB in the mini PC
  It connects fine to the TI says it is u-disc. It's a (mini Toshiba external driver.usb 2.0)
  I put a few pictures to test, but he says always the same.
  in the settings it says (not available)
  could you please help me
  Thank you

  system: mini PC 7 android
  version 2.2
  kernel version 2.6.32.9 - default
  build number froyo generic - Eng2.2 ver1.5.5 - 20110920.103830

  Hello

  Do you have the same connection error an another USB 2.0 external HARD drive or a USB flash memory stick this laptop?
  Test this
  Maybe this problem of HARD drive.

  USB 2.0 provides a power of 500 my if an external USB HDD or USB device needs more power, a problem may appear.
  In such cases its recommended to connect a USB hub with an external power supply between the laptop and the USB device

• Driver installation problem Windows XP Home on Satellite L450D-11 t

  I bought a laptop SATELLITE L450D-11 t with windows 7 and I want to use a USB stick for internet, but it requires a previous version of the operating system.
  So I installed windows xp, but on this site, it is not all drivers (motherboard, video, audio, network) compatible.

  Analysis of the situation, I found the driver for audio on the Realtek site but on the mother/video card driver, I have a few problems:
  the AMD 780 G chipset and the display hardware is an ATi Radeon HD 3200. On the AMD website, I found a package with all the necessary drivers, but during the installation of the system restarted itself each time I start the installation. I opened the event viewer to see if there is an error, but nothing.
  I restarted the pc mode provvisional: he can't complete the installation, but it gives an error "Unable to open driver for tracking" or something like that.

  Is there something wrong? I forgot to do something?
  Thank you

  Hello

  Why you n t take an another USB compatible with Windows 7? In my opinion, it would be easier to reinstall the whole laptop but ok, it s your decision ;)

  As far as I know the drivers on page AMD intended for office use only, so I think that they will not work on mobile chips. But maybe the only corrupt the downloaded driver files, then try to download again.

  As I've already said, I would choose another USB key. This laptop is designed for the new Windows 7 and everything should work properly on the new operating system.

• HP 802. 11b / g wireless network: HP 802. 11b / g wireless network adapter driver installation problems

  After installation of Windows 10 does not work me wi - fi, I can not find a compatible driver. The search I found one, but it gives me driver installation problems

  Hello @fede95,

  Thanks for posting on the Forum of HP and welcome!

  I'd be happy to help you with wireless driver problems you encounter since the upgrade to Windows 10.

  I will need to know your product number. You can follow the steps here - http://ow.ly/XnZL300dhzo - to find.

  I'm looking forward to hear back and work towards the resolution of this problem.

  If these steps solved your problem, please click "Accept as a Solution." You can also click on the "congratulations, Thumbs Up" on the right to say "thank you!"

• External hard drive USB not recognized by Win XP Satellite

  My Satellite S105 running Windows XP Professional SP3 works well with any external SSD.

  Yet my external USB hard drive from Seagate Freeagent is visible sometimes and not others. The Seagate works very well except when it is invisible to Windows. Removing the drivers USB (re-installed by windows) does not change this. The drive is not visible in my computer or elsewhere. Dirve of Seagate Manager does not detect the drive in these moments there.

  What is the solution?

  Thank you.

  I guess that other external USB devices (USB flash drive key, mouse, etc.) are working properly and don't disappear in my computer. Is this good?

  This means that this issue has nothing to do with the laptop or USB ports for s laptop but with your external USB HDD.
  A maybe it's some kind of problem with the USB HDD. ?:|

• External hard drive USB PX1223E - 1 32 guard disconnection/reconnection

  Hello

  I'm new to this forum, so I hope I'm posting in the right place.

  The external hard drive works fine for over 2 years now, but it has started to randomly disconnect from my PC. I have the USB to say alert that it has disconnected and then moments later it seems to reconnect with the usual USB alert. Occasions, it seems to work for hours without the problem return.

  It is a sign that the reader reaches the end of his life?

  Thanks for your help

  Hello

  Perhaps the reader reaches the end of the life, but at the moment it is not easy to say...

  Have you tried another cable to the HARD drive? Maybe it's just a problem of cable s.
  In addition, you should check the HARD drive on another computer or laptop. So you can make sure if it s a USB issue or not.

  Welcome them