Equium A60-191: which driver should I solve software problems

Similar Questions

• Equium A60-191: 'request could not be performed because of an i/o device error. "

  I have an Equium A60-191 my dvd drive has stopped working, the led on this subject is on all the time like his who seek constantly.
  It does not read the CD or dvd and gives an error "REQUEST COULD NOT BE PERFORMED DUE TO A DEVICE IO ERROR.

  I tried to remove and reinstall the drive from the Device Manager, it doesn't help. I also tried to boot from the drive computer, but does not start, so I think that the drive does not work.

  I also noticed that the motor does not work in the reader, because that drives don't spin. Device Manager indicates that the drive works properly. Anyone know what is this error?

  1. click on start
  2. right click on my computer
  3. Select manage from the menu that appears
  4. in the computer management window, select Device Manager
  5. in the right pane, click to expand IDE ATA/ATAPI controllers
  6 identify your CD/DVD drive in the menu expanded and right click on the appropriate drive
  7. Select Properties
  8. in the Properties window, click the Advanced Settings tab
  9. in the Transfer Mode box that represents your CD/DVD drive (typically device 1), open the menu drop down and select PIO only
  10. click OK and exit all windows.

  If this does not solve your problem, then you need to go back using the procedure above and change device 1 to #9 step will support to 'DMA if available '. Then, change the device 0 to "PIO" only in the Transfer Mode box.

  Device 0: Primary IDE Channel
  Unit 1: Secondary IDE Channel

  Of course, he could also be dead DVD player. In this case, a new drive should solve the problem.

• The motherboard Equium A60 - 191 necessary UK provider

  About 8 months ago, I bought this toshiba Equium A60-191. I need another motherboard for it, everyone would be able to help because I can't seem to find suppliers for this. Cheers mark.

  Hello

  I think you should contact a Toshiba authorized service partner. They should be able to give you all the parts. You can find one here:
  https://EU.computers.Toshiba-Europe.com
  -Support & downloads - find an authorized service

  Good bye

• Equium A60 - 191 wireless lan mini pci

  Hello
  I have a Toshiba laptop Equium A60-191.
  I wanted to know if I can install a wireless LAN card mini pci on this model. Does anyone know the procedure.

  Thank you
  Vikram

  Hello Vikram

  I found the information that your device is not ready WLAN. This means that your device has no antenna WLAN. If you want to use the WLAN you must buy card PCMCIA WLAN or WLAN USB stick.

  Good bye

• Equium A60-191 - need a new recovery disk

  Hello. Anyone know where I can get a cd recovery Toshiba Equium A60-191-the one I was badly scratched and I need a new - can I download one on line?

  Any help would be greatly appreciated. Thank you
  Dee :-)

  The recovery disc can t be downloaded.

  If you need a new recovery disk, you need to ask your local ASP. They can order.
  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com/ > support & downloads > find an authorized service provider

• Equium A60-191 - blue screen at startup

  Hello

  I have a laptop Equium A60-191. When I start it, I get a blue screen and it tries to re start it again. I started from my Windows CD and used the recovery console to fix the problem. He now works ok. However, the same thing that happened there are only 9 months.

  Has anyone seen this problem before?

  Thank you

  In my opinion, this kind of problem has thousands of PC users with all kinds of laptops and desktop PCs. really nothing exceptional and there is no reason that a why this happens.

  If now everything is Ok I see no reason to talk about this. Once again, if the same thing happen please report only and maybe we can discuss your problem.

  Bye and happy new year!

• Equium A60-191: upgrade graphic integrated processor

  Hi, new,

  I was wondering if I could spend my processor integrated switch to something better (anything!) I have a TOSHIBA Equium A60-191 with an ATI Mobility Radeon 7000 IGP.

  Thanks (please answer)
  Thanks again!
  Oh and thanks again!
  Suddste000

  Hello

  as far as I know, it is not possible to update the graphics card in a laptop.

  Good bye

• Satellite A100: Controller Ethernet missing - which driver should I use?

  He miss the Ethernet controller and can not use my network card / W - Lan... ideas which driver download to fix the problem? Am running XP
  Thanks Anke

  Hello

  Go to this webpage and download this driver. This is the driver of network, also known as controller ethernet etc.. Hope that solves your problem.

  http://it.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=it&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 624 & langua ge = 24 & selOS = all & selType = all & yearupload = & monthuploa d = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = 19 & selectedLanguage = 24 & type = all & page = 1 & ID = 47467 & DISO = 10 & driverLanguag e = 42

• Which driver should be used to connect HP 34401 using RS 232

  Hello

  I'm using labview for the first time. I want to use the RS 232 cable to connect between Labview and HP 34401 multimeter. Which driver should be used for this purpose? Help, please.

  Thanks in advance!

  A search for the HP 34401A on the Instrument Driver Network reveals this page, which should have what you need. If you're using LabVIEW, you will want one of the first two projects.
  
  
  Also, for future reference, this board is for NI DMMs. For future instrument driver assistance, you will receive more timely and expert information on NI's Instrument Control forum.
  
  
  Please let us know if you require any further assistance.
  
  
  Thank you,
  
  
  Tobias
  Software Engineer
  Precision DC/Modular Instruments
  National Instruments
  

• Equium A60-191: number of Modem - only an analog phone lines are supported

  My Equium A60 has been turned on when lightning struck nearby and caused the power supply turn off and turn back on.

  The OS is XP Home and my ISP is AOL. When I try to access the Net with DUN, I get the repeated error message:

  "Connected phone line is not compatible with this modem. Only analog phone lines are supported. »

  My desktop computer, which also uses AOL, always connects to the same phone line with no problems.

  I restarted the A60 several times; changed and I tried the 2 phone connection cables - both work; the phone line works very well; I reinstalled the driver provided on this site; removed the tick from the box that says to wait for the telephone line; verified that the modem is working and on the Device Manager list. All this is in vain.

  Convenience store suggests that COM 3 is not enabled. I don't see that com 3 listed in the device under Ports Manager.

  I tried Google and ASK with the error message. There is not a lot of posts, and it seems that the Toshiba modem is actually an Agere. This fact seems to be the object of some of the complaints.

  Finally, I uninstalled the driver/modem, AOL and another DUN connection. I restarted and went through the process of installing AOL and "new hardware". While the modem is on and allegedly working... I am still unable to connect to the Net. I reinstalled an additional 'pay as you go' ISP. When I try to dial a number on which it generates error 680. It does this even when the box is unchecked, to wait for a dial tone.

  I would be very grateful if someone could help it. I'm out of ideas.

  Thank you very much.

  Hello

  You are right, the modem supports the Modem Agere chip.
  You won't find the COM3 in the Device Manager for the modem uses a non-real com port. It s virtual com port.

  I think you should start the diagnostic tool test and check if the Modem has no malfunction.
  Additional you must remove the connection in the region Select utility and after restarting again create a new.

  I also found useful Microsoft article on troubleshooting network and dial-up connections.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/trouble_all.mspx?mfr=true

  and you'll find info on the error of DUNS 680:
  http://www.Modemsite.com/56k/duns680.asp
  http://PHP.iupui.edu/~aamjohns/trouble.html#no tone

• Equium A60 CD/DVD Drive problem?

  My cd/dvd on my laptop Equium A60 drive seems to have stoped working. If I put a disc in the drive of the yellow light on the drive flashes then nothing happens. If I go to my computer, that the drive is most recognized either, and only the hard drive is displayed. I recently downloaded the bios update and I don't know if it affected it?

  Can someone tell me what happened or how to fix it?

  Thank you very much

  Hello

  Please check if Device Manager the drive occurs.
  Try moving the drive and reboot your device. The operating system should recognize the drive again.
  Please post again if the problem persists.

  Good bye

• Equium A60-155 - HARD drive upgrade

  I have an Equium A60-155 with 40G HARD drive.
  The manual says that this model comes with up to 80G installed, but is it possible to upgrade to 120, or even 160G?

  Hello

  If your laptop comes with a HDD of 80 GB then you ve got a good chance a 100 GB or 120 GB HARD drive would be supported.
  I have no course with a size of 160GB HARD drive but I m m the 160 GB might be too afraid.

  I recommend you use and test a 120 GB

  See you soon

• Equium A60 - Max HARD drive?

  Hey, forum noob here.

  I know this has been asked before (see [here | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=119435𝊋], [here | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=81428𓸔] and [here | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=136793𡙙]), but I have yet to see a definitive answer, so...

  What is the biggest HARD drive I can put in an Equium A60? Anyone know?

  (Processor is Celeron 2.8 GHz;) Current BIOS is version 1.8 c).

  NB. this a 2nd or 3rd hand reconditioned machine. The insignia on the bottom says "TOSHIBA EQUIUM A60 PSA67E-00300C8J" but SystemInformationForWindows tells me that it is a Satellite A60. So maybe someone has used a disc re - install from a Satellite A60 at some point. I don't have if this is important - I mention this it just in case...

  TIA. Any help would be appreciated.

  Tom

  Just if someone has tested, it can offer a definitive answer. Of course, nobody has played with such things but let's be realistic.
  Equium A60 comes with IDE ATA 6 HDD SATA not. AFAIK these HDDs have limit on 136 GB or something like that. So I think that you can use all the disk up to 130 GB.
  In my opinion, you can use maximum 120 GB IDE ATA HDD. I'm not 100% sure, but if you use the more big HARD drive is more than 136 GB will not be recognized.

  So much about the theory. ;)
  I just hope someone can confirm or deny my theory on HDD max.

  Bye and good luck!

• Update drivers for Equium A60-191

  Hello

  I want to update my drivers - especially my display driver I often get an error message saying that my "ati2dvag display driver has stopped working properly", leaving me with a low display resolution. I reboot and I told me that Windows has recovered from a serious error.

  I just be a part of this site was updated drivers, but my model is not listed.

  Can anyone help?

  Thank you.

  Hello!

  Have you looked in the Archives?
  There, I created all the drivers:

  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
  * Archive *-online satellite-online satellite A-online Equium A60

  Good bye

• Equium A60-191: application control status of the battery in the system tray?

  I had to reinstall XP. This has caused the loss of pilots and probably other things that I don't know.

  One of the elements lack seems to be the software or driver? for the battery. The battery is cooler at full power. The software located in the system tray used to indicate the power status and if it is ac or dc connected.

  Any suggestions that I need and where I can get to fix this, please?

  Hello

  I know you don t need the drivers or software for charge the battery to full power. Only what you need is the Toshiba Power saver utility.
  This utility is very useful because you can set different power for portable use different modes. For example, if you disconnect the laptop computer of the energy-saving AC adapter will automatically switch to the mode of energy that has been configured for the use of the battery.
  These methods help take care of the battery and increases battery life and it shows a battery status in the taskbar
  But there is nothing to recharge the battery witch.

  In my manual, I found a lot of info on the battery and how to manage the use of the battery. I think that the same information you will find in your user manual. Check it out.

  The last possibility is a malfunction of the battery.
  But in this case only a battery replacement will solve your problem.

  If you want you can try to check if the same thing happens with the new battery.