HP - 15 laptop: HP-15 Notebook SD card reader works do not (model # HP 15-D060NR

Similar Questions

• Satellite click Pro 2 - slot card reader works only not with Fedora 21

  I try to get my Satellite click 2 Pro P35W-B3220 to recognize the microSD card reader which is on the side of the screen.
  I have the other to works fine.

  I use Fedora 21 as my operating system.

  Hello

  If please run the following 2 programs in a terminal and paste the result into a response:

  lsusb

  lspci k

  then we can take a look at what your device is and gets support in the kernels later.

  Tom BR

• CF/MD card reader camera is not working now

  CF/MD card reader camera does not work now. This has been "wobbily"from the beginning, but always worked til now. " There is no response when the card is inserted, and I found no way to update the driver - if this is the solution...

  What is the model of the camera and the reader?

  1 try to insert another card on the card reader to see if it works or try the card on another computer/card reader.

  2. the format of the memory card camera on the camera not on a computer, so that they cannot work by simply inserting a card reader.

  3. you can use the USB cable provided with the camera to connect to the computer. If the provided camera sofware is intalled on your computer, connect the camera and pressing the play button on the camera would have run the software and you will have access to your photos. Consult your manual on how to connect the camera to your computer. If you don't have the manual and the software, go to the support site for the manufacturer of your camera and you can download the software and the manual.

• I have Win7 64 bit ultimate and from time to time when I start PC my card reader drives do not appear in my computer.

  I have Win7 64 bit ultimate and from time to time when I start PC my card reader drives do not appear in my computer. Device Manager indicates that they are working correctly. Sometimes my dvd drives disappear. I have to do a system restore to solve this problem. For some reason any Win7 has problems with storage devices. How to stop these dissappearing from my Computer(or not getting a drive letter assigned) storage devices?  It's very frustrating. And, System Restore is not a way to solve this problem, it's just a quick fix. I have three internal hard disks, three hard drives, card reader external drives, USB keys, disks, etc. I need a way to solve this problem when it happens. So far, happened about 9 times in the last six weeks since I installed Win7 64 bit ATU.

  There may be an update of the motherboard BIOS to solve the problem.

  Otherwise, as your card readers are no doubt attached via USB the usual way to solve this problem would be to uninstall the drives and the USB controllers and devices in the system restore.

• ENE PCI Secure Digital / MMC Card Reader Controller does not

  ENE PCI Secure Digital / MMC Card Reader Controller does not

  I suggest that you go the manufacturer of your computers website and search for drivers chipset update.

  Click Start, type: Device Manager

  Press enter on your keyboard

  Click with the right button on the controller listed in the tree view of the devices

  Click on uninstall

  Restart your computer and let Windows redetect.

• Pavilion g7-1260 Notebook: SD card reader

  My SD card reader stopped working after the installation of Windows 10.  I was running Windows 7 Home

  .  I have a Pavilion laptop g7-1260.

  Hello:

  The only suggestion I can offer would be to try the driver for W10 directly from Realtek card reader.

  Download, unzip and run the Setup file from the application of the 1st item on the link below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

• Pavilion laptop: SD card reader works only with windows 10

  The SD card reader does not work after installing windows 10. I contacted Microsoft... they fixed other issues but said HP drivers needed to be updated to read SD cards.  Help, please. I am a professional photographer and NEED to use SD cards!

  Hello:

  What is the number of full model of your laptop?

  So most of the new laptops pavilion equipped with a Realtek card reader, try the first driver on the list from the link below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• Product name: HP 15 Notebook: my card reader does not work - Mute red light does not

  My card reader does not work

  It happened several times after the upgrade to Windows 10

  It may work once or twice after the upgrade, but when there is an update from HP

  My antiverious is Kaspersky internet security and it is compatebale with windows 10

  Also, the Red mute botton does not work but the function works.

  your opinion and your support is appreciated

  Product number: L9N79EA #A2N

  Product name: HP 15 laptop

  Windows 10 House only 64-bit language

  Hello @KhaledMorcy,

  I understand that you are having a problem with your card reader and wanted to help you!

  Have you tried to use Windows Updateto search for the drivers that are compatible with Windows 10?  You can consult this site too: products HP - where can I find drivers Windows 10 and software for my model?

  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  It is possible that the drivers are not available for your product.  If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10

  Also, check out the following document, as it can help to solve the problem for you:

  HP laptops - use and troubleshooting (Windows 8) memory card readers

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Have a great day!

• Re: SD card reader works only on Vista - Satellite Pro P100 pspa4

  Hello

  I have a Toshiba laptop Satellite Pro P100 pspa4 with Vista installed.
  I have my SD properly installed host adapter (well looks like in Device Manager)
  But absolutely nothing happens when I insert an SD card.

  I have a Mass Storage Controller not properly installed and I think that's the reason why, but I can t find any drivers for it.

  On XP, everything works fine.
  Anyone know where to find the drivers for that?
  On the Vista from Toshiba driver page I can only find drivers SD utilities.

  Thank you

  Hello

  On the European driver Toshiba page, you will find the Flash Media Driver for Texas Instruments. This is the driver for the Bridge Media Slot. This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  Try to reinstall and the SD card should work!

  See you soon

• Tecra M5 - SD card reader works with the factory settings

  Hi all
  My SD card reader has been in place. It will read a few cards of 4 GB and won't read other (usually newer).
  All cards in this problem area are Transcend cards 4GB SD (HC or whatever the format more later is)
  The cards, the M5 will not read can be read both my PDA, but also an old Tecra 9000 (who will also tell the other 4 GB cards)

  The PC was recently engineers have a problem so I asked to look at this problem. They reported that it was a software problem, because if they load the recovery CD (that is, to bring the machine to factory State) the SD card reader reads cards problem OK; Back to my setup and the SD card reader can not read cards SD - error message is "the request cannot be performed because of an i/o device error."

  So I guess that I need new drivers. Very well except that it has no drivers for the drive SD card itself. Its a part of the motherboard. There is a 'secure module SD' on the download from Toshiba site and I downloaded and installed the SD Secure module (dated 2008)
  However, Device Manager still shows that the SD host controller driver is Microsoft version 01/10/2002 6.0.4069.5

  If anyone has ideas on how to fix

  TFA
  R

  Hello!

  > back to my setup and the SD card reader will not read SD cards
  Can you explain what you mean, please?

  I put t understand why you n t run factory if it s a software problem. I never had problems with the factory settings because then I can make you that all functions work properly on my laptop.

  Good bye

• TECRA M9 card reader still does not not with Vista SP1

  Why Toshiba didn't supply of integrated drivers for the card reader M series for people who do not want to run the Toshiba version recompiled Vista, which allocate Inc. of the unwanted software like Norton to slow down the Vista system!

  Im running a clean install retail Vista x 86 with updates, but 1-2-4 & 8gig sd cards will not work!
  in Device Manager it says "the device cannot start code 10".

  IM also beta SP1 which will detect the SD card, however cannot you read/write on the SD card.
  An update of the factory of the SD card reader Vista is whats needed!

  Hello, Robert

  At first, I must say that you are completely mistaken.

  The first Toshiba does not force someone to use the recovery image only. You can install your own version of Vista at any time. I also installed Vista Ultimate on my laptop. I also installed the just necessary drivers, download page of tools and utilities following the Instructions of facilities of Toshiba document. I hope just do you the same thing.

  As you wrote that you are on the tests of SP1. I also believe that Toshiba is also on the tests because SP1 is still beta version and so far not implemented the recovery image. Up until Toshiba offers no support for SP1. I can imagine different things will not work properly and Toshiba that will probably correct with the new drivers for the problematic hardware components.

  In the end, I can say: you can use your own OS installation like me and thousands of other owners of Toshiba laptop.

• ENVY of HP TouchSmart m6-k015dx: SD card reader works only with windows 10

  After you have installed windows 10 the SD card reader will not work.plz help me I am a student and offbeat leactures etc. in my laptop.

  Hello:

  See if you install the driver of W10 card reader should be...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_155234_1

• I just put in a new hard drive in my computer and now my sd card reader slot does not work. How can I get my computer to read the SD card?

  Computer crashed

  New hard drive in my HP laptop

  Computer is not reading my SD card

  Hello

  Make sure the SD card works on other computers.

  The card reader is a USB device to ensure that other USB devices work.

  Check with HP, their drivers support and documentation online and ask in the forums of HP where it
  others will be with the same or similar model. I hope this is just the driver. It is possible that the device has been
  back not connected properly or even damaged when installing the new hard drive.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Why Ms service pack 2 for windows vista will not activate the sd card reader work?

  I tried to read a card to 8 GB using my laptop built in card reader, I found a solution for vista o/s before sp 1 and 2.  Certainly, there is a fix for sp2 computers now?

  Checked on the net and a lot of people may not read their 4 Gb + SD card, especially on laptops.  My implementation, laptop of Acer 9423wsmi, OS Vista, with Texas Instruments PCIxx12 Cardbus Controller.  I just downloaded and installed sp43509 driver from the site Web of Hewlett Packard and Lo, now I can read my 8 GB card!

  I tried to read during the last two years, so your response inspired me to find a solution, even though you did not actually provide a solution yourself.

• Win 7 Pro 64 bit configuration network, cannot access card reader when im not connected network

  IM under Win 7 Pro 64 bit on my laptop, im am Setup on an Exchange to my office network. The laptop has an SD card reader, and since I use CF cards I have a USB card reader also (my old card reader has been pre Win 7, so in desperation, this last weekend, I bought a new Targus card reader that preload drivers and is Win 7 compatible.

  The question is when im not connected to my office network and I put an SD card in the embedded player, or use the USB drive (the old drive did the same thing if it is not a drive issue) the computer laptop reconizes the event by sound in my computer scans the URL bar, and the card will not appear in the my computer window. So im hooked on my network it readings, launches autoplay and wonder what to do (as I have it setup to do).

  I always perform software updates and just checked my Windows is up-to-date.

  Any ideas as to what is happening and how to fix?

  Thank you

  Hello

  I suggest you to send your request to the below thread to get assistance on this issue.

  http://social.technet.Microsoft.com/forums/en-CA/categories/

  It may be useful