HP 15 Notebook PC: The with two beeps with long Bios boot pause inbetween

Similar Questions

• SOLVED blackBerry smartphones - cannot make outgoing calls. Get two beeps like busy tone with the Koodo Mobile in Thunder Bay, Ontario North

  This has caused me a lot of frustration.

  With my curve when I try to make an outgoing call and I get a busy signal as two beeps repeating themselves.

  I tried everything and the only thing that worked was a security wipe, so losing all my data.

  If I made a backup and restore, the problem comes back. If I restored it selectively through desktop BLackberry, database of the database, the problem returns. Koodo Mobile and Blackberry escalated support was not able to understand this.

  However, through much trial and error, I found that if I limit my identity or turn off the option to show my number in the phone settings, for some reason any he caused this problem.

  So I can't block my identity by using the settings on the phone.

  This can be the result of my location service and the carrier, which is Koodo mobile, in Thunder Bay in Northwestern Ontario that used the TBAYTEL towers for the service, the type of signals technology service. I don't know, and no one was able to tell me why this is happening. I went to 6 months not being able to make outgoing calls without losing ALL my sms, contacts, BBM, TXTs, bookmarks and other personal data. Only a security wipe would allow me to make a call - until I have activate the restrict my identity and activated the show my number option.

  SO - I hope this helps other users. I've been through three phones, thinking that it was the material problems.

  It's a kind of crappeh because I would not block my identity with a few calls. So with the curve BB on Koodo to Thunder Bay, I can't do that. I have not tried outside the Northwestern ONtario, but it will probably be the same, unless I am out of service TBAYTEL area.

  Such is life. Live with it.

  Difficulty easy but unsatisfactory.

  I ' lll this post in the Forum of Koodo so when one exists.

  See you soon!

  I did these steps including restore each database one at a time with the same results. I can do a full restore and the remains of the issue until I set restrict my identity forever AND Show My Number Yes. I also did all of these steps with the any other BB Curve 8530 and it seems to happen every ih in this area.

  I found the work around but it would be good to know why and if this happens outside the TBAYTEL towers that Koodo Mobile uses throughout Northern Ontario to the Ontario-Manitoba border in the West, to the North of Hearst and East of Sault Ste. Marie.

  If there are a Koodo Mobile, users who have a BlackBerry Curve 8530, I'd like to hear you just what I see if it is unique to the service provider, hardware, software and network type, geographical location, etc.

  Any comment is appreciated, as support Koodo and BlackBerry have been baffled and couldn't solve this problem and I hope that others find it so that they can save months of time and frustration, I have lived.

  See you soon...

• Satellite A200 - black screen with two beeps

  Date: October 17, 2009

  I have Toshiba Satellite laptop computer * model A200 PSAFCA-01400J *. I am facing a problem of * completely black screen * (I can't see any image either). It happened twice more than the screen wouldn't turn on by moving the mouse or the touchpad. To turn on the screen I had to restart the computer. The screen worked well until it turns off again. Since it does not turn on even after I restarted my computer several times. I noticed that my * Windows vista home premium * load properly I can hear audio that indicates that I am ready to open a session. I also noticed the sound signal after slipping my finger on the sensor attesting that I connected successfully, but the screen remains black.

  When I turn on my computer, I noticed that it sounds two beeps, first beep is short and the second beep is relatively long. I tested the cover closing the cover switch and noticed that my computer goes into sleep mode and by opening the cover that Eve turns off and my computer turns on again; but the screen remains black. One of my friends suggested that the backlight of the screen inverter or the lid switch is defective. Can someone tell me what could be the problem and what do the two beep codes?

  Thank you

  Hi mate,

  Normally the beep codes at the start of average that it s something wrong with the hardware of your laptop. As Akuma said, maybe the graphics card or RAM must be replaced or other parts too.

  Have you already tried to connect an external monitor? You can see a picture on this subject?
  I don't know but maybe what he s m only internal something wrong with the monitor.

  In any case, I think you should contact a service provider for help. Technicians can check the laptop and fix it for you.

  Welcome them

• I've lost the last two digits of my valid key for xp pro sp2 and notebook, how do I get the key and support? where?

  I've lost the last two digits of my valid key for xp pro sp2 and notebook, how do I get the key and support? where?

  Hi Jonathan,.

  Please go to the Microsoft Community Forums.
  After the description of the question, I understand that you have lost the last 2 digits of the product key.
  Let me go ahead and help you with the issue.
   
  Please answer these questions, which will help us to help you best.
  1. How did you get the product key?
  2. the operating system come preinstalled on the computer?
   
  I suggest you for the link and check if that helps:
  How to identify, locate, and replace a product key
  http://support.Microsoft.com/kb/811224
   
  See also:
  http://support.Microsoft.com/kb/295539
  
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• I see two windows 'readers' when I boot with the Option key

  I had to reinstall Windows 10 (with BootCamp).  Now, I see two windows 'readers', when I boot with the Option key button.

  How can I remove a?

  Start two of them in the same installation of Windows?

• I have an iMac 3.06 GHz with only 4 GB of memory.  During last two weeks, whDurin the past two weeks, when I click on 'Edit', it does not hold the menu drop down.    Need my Mac 'cleansing' and how do I get rid of unnecessary files?

  I have an iMac 3.06 GHz with only 4 GB of memory.  During the last two weeks, when working with documents, buttons on the desktop did not have in the drop down menus.    How can I get rid of unnecessary files and wipe the hard drive?

  Drop down menus stay open at other times? Have you tried another mouse? More information please write an effective communities of Apple support question

• I'm trying to restore my win7 with HP USB recovery Flash Disk, I get the following two messages

  I'm trying to restore my win7 with HP USB recovery Flash Disk, I get the following two messages:

  "Do not create C:\Users\User\AppData\Local\Temp; c:\arc\01Script\FormatUFD.SP' and the messsage "Fail to create.

  How to port HP_recovery in car to my flash drive?

  Windows 7 x 64, HP G62-144DX

  Hello:

  I can't help you with this specific issue, but if you can get it is resolved and you can read the product key 25 character Microsoft Windows on the bottom of your PC, do your own installation of W7 media to reinstall W7.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never

  Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never had this problem before. Now, every time I create a layer mask, or try to work on a Photoshop freezes completely, forcing me to restart and (most of the time unless I have record EACH step) start of a scratch. Which is pretty much annoying... any suggestions?

  Move on to the Discussion of Photoshop

• I bought the Adobe Creative Suite master collection over the past two years with my old mac. I bought a new mac, can I continue to use the old serial number? If not, where can I get the serial number?

  I bought the Adobe Creative Suite master collection over the past two years with my old mac. I bought a new mac, can I continue to use the old serial number? If not, where can I get the serial number? Where I am, I guess that contact to?

  Yes, your license allows you to have two facilities activated simultaneously, so if you want to you can have both machines busy and active so that there is a backup should it come in handy.  You can also contact Adobe via chat and ask them to reset your activations so that you have one (or two) released for a new installation.

• Urgent: Facing serious problems with the installation of BEEP

  Hi all
  
  This was a pain for me now,
  
  I installed the BEEPER and his works fine. Its set up on my desk and I connect to the databases locally. But when I restart my system, OC4J would not get initialized and so I'm not able to launch published BEEP. Among the various warning messages following me:
  
  * WARNING: Source Code C:\OracleBI\oc4j_bi\j2ee\home\applications\xmlpserver\xmlps
  erver\WEB-INF\lib\ldapjclnt10.jar (from WEB-INF/lib/directory in C:\OracleBI\oc
  4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\WEB - INF\lib) has the same thread
  Ename but is not identical to the /C:/OracleBI/oc4j_bi/jlib/ldapjclnt10.jar (of < c)
  Ode-source > in META-INF/boot.xml to C:\OracleBI\oc4j_bi\j2ee\home\oc4j.jar). If
  There are different versions of the same classes, he's going to be hidden like the lat
  TER is already visible in the search path for the xmlpserver.web.xmlpserver:0 charger.
  0.0 *
  
  Now I tried to copy the file on to a device at the chance of another, but still no. I reinstalled the JDK and BEEP twice but still no luck... I mean, is there a way to solve this problem. Can any body please help me with this as to why I get this warning message. When I try to reinstall the BEEP it asks me to fix it... is it possible that I can reinstall my system completely and not repair.
  
  
  Need for emergency assistance (if any body wants the screenshots, I can predict that too)
  
  
  Thank you
  Ronny

  Ronny,

  the warning you have posted is just a warning and normally BI Publisher (OC4J) works even with this warning. There must be something else wrong.

  Concerning
  Rainer

  P.S.: If it's an urgent question it might be a good idea to open a SR

• Acer Z3731 all-in-One 'beeps' constantly with no bios screen using F2?

  I need help diagnosing this problem... I have an old installation of Home Premium Windows 7 (X 64) on this system.  He has been victim of fragmentation due to the constant of Microsoft Windows 7 upgrade and gradually slow, so I broke down and tried to install a Bank of RAM I had bought to upgrade the system two years ago, but had not bypassed in the development in.  I provided the face of the box on my bed, took on the stand of mounting screw (3), pried on the back plastic cleanly and unscrewed the 5 small phillips screws that hold the metal case closed.  I inserted the new RAM to the vacant slots, it tight up with care and all wound up.  When I turned on, I got was a constant "beep" and no apparent ability to enter the BIOS via F @ to change things, or to boot from another source using F12.  I have a 'replacement' matching 'green' hard drive WD happen tomorrow or the next day that cost me $51 on Amazon, to less than the cost of a service call to deposit in a local computer service shop, and I supported the system until my SIN just before opening the case.  That I should try next?

  on the desktop and AIO is DEL key to enter the BIOS normally.

  If it beeps after adding ram, please check if the stick of ram is compatible with your PC or has the same features of the installed ram sticks.

• Alienware 15 No Post two beep

  Hi, I had this Alienware 15 last year, everything was fine until today.

  I7 6700hq

  980 m

  A strange thing happened this morning. Somehow the laptop can not find wifi hotspots so I turned off the computer and put it back in to see if I can solve your problem. Then the beep. Two beep means maybe RAM issue, so I tried to reinstall and even replace the RAM, but without success.

  Looking for help, I know the locations of memory on the motherboard may be the cause, but I would like to hear from anyone on how this problem occurs in a shot with no obvious indication.

  One thing that I forget, I leave on mode to sleep a lot, and sometimes I just let it run out the batteries.

  Hello

  Check this article for no post troubleshooting Dell:

  www.Dell.com/.../en

  Also, try a bar of memory at a time in each slot. If the problem persists please send me a PM with the serial number.

• When I start my laptop running windows 7, I sometimes get a duller tone of flashing two beeps as if something is wrong. What coud this be and how do I kill him?

  When I start my laptop running widows 7 I sometimes get a most annoying intermittent tone of two beeps suggesting (I imagine) that something is wrong. I think this has been already experienced with the connection of the optical mouse (Verbatim). Later, everything was fine, but the sound is back and the phone seems to work OK. What could cause this warning sign and how do I get rid the same?

  Hey Neville,

  1. What is the brand and model of your computer?
  2. did you of recent changes to the computer?

  Let's try these suggestions and see if the problem still occurs.

  If you are using AMI BIOS, see the error messages associated with it.

  Number of Beeps      Error Message
  ---------------------        ---------------
         1             DRAM refresh failure
         2             Parity circuit failure
         3             Base 64K RAM failure
         4             System timer failure
         5             Processor failure
  

  These errors are codes reported by THE system BIOS. Because errors are hardware related, you must call your equipment manufacturer or dealer to help fix the problem.

  The product included here, AMI BIOS, is manufactured by vendors independent of Microsoft; We make no warranty, implied or otherwise, regarding the performance or reliability of this product.

  Hope the above information has been useful. If you have any doubts, answer here and we are happy to help you.

• button refresh Foxfire did not work when clicked on for the past two weeks

  button refresh Foxfire did not work when clicked on for the past two weeks

  Hi, see controls customize Firefox, buttons and toolbarsand click on restore default settings.

  If this does not help, Try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• I had two apple ID, but only now have access to one of the e-mails. When I try to login, it differs on the account that I no longer have access to. How can I change my information to my * account?

  I had two apple ID, but only now have access to one of the e-mails. When I try to login, it differs on the account that I no longer have access to. How can I change my information to my * account?

  < email published by host >

  As you know that these are user forums, it is not a good idea to post your e-mail address on a public forum - I asked the host to remove it.

  What "information" do you want to go? You can transfer iTunes downloads to another account, or to merge accounts - all downloads are permanently associated with the account that has downloaded (if only this account can potentially re-download purchases, downloads of updates of its applications, authorize such purchases on iTunes from the computer, and make in-app purchases in them).