Acer Z3731 all-in-One 'beeps' constantly with no bios screen using F2?

Similar Questions

• Help! -Acer Aspire all-in-one touch screen after upgrade Windows 8 Pro

  Hi all!

  This is a rather confusing questions and about * me off no end!  I know that some of you may have encountered this already and could have a potential solution?

  I have an Acer Aspire all-in-one, AZ5101 (Aspire Z5101), with 4 GB of RAM, etc..

  Since the Developer Preview of Windows 8 came out, I've been running Windows 8 perfectly.  I completely uninstalled (each time itself) and run the following:

  Windows 8 Developer Preview, 64-bit

  Windows 8 Preview of consumer, 64-bit

  Windows 8 Preview, 64-bit version

  In any case, on this PC worked perfectly - y INCLUSIVE of the TOUCH SCREEN.  I never had a problem.

  So far so good.  Then, they finally released updates Windows 8 Pro official licensed by download.  I bought the upgrade and downloaded.  Just like in * ALL * other cases, upgrade, I chose "keep nothing" of the old system (I never really got all the important data on here), and do the upgrade itself.

  After the upgrade was complete, and ALL Windows 8 Pro updates have been applied by Windows update, I have a system where the screen is clear and precise, everything works, and all devices in Device Manager, show the Greens well, it works fine - NO ERRORS.  HOWEVER - NO CONTACT!  No touch no screen function at all.  The screen now has this time as a standard monitor.

  I tried the driver Idéacom - no luck.  Anyone know (please? LOL) how to get the touch screen to work again?  Thank you very much!  I really appreciate any help you can give.  Microsoft technical support had NO idea and no reply emails from Acer! Laughing out loud

  Thanks again,

  Mike

  [edited to conform to the guidelines]

  Hello Mike

  I sent the pilot. Please test and advise.

  Kind regards

  FReeZA

• How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

  How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

  Hi baldwinj,

  Follow the steps outlined in the document below to install the OS driver in for this printer in Win 7 64 bit.

  HP LaserJet Color LaserJet and products of LaserJet AiO/MFP - install the driver included in the operating system Windows 7 (OS)

  Download drivers and software

• I need to replace the hard drive of my Acer Aspire all-in-one 5600U?

  I have an Acer Aspire all-in-one 5600U. The other day the power in our House went out due to a storm. After she came back and went to use my computer, the screen was black and said "Reboot and select proper... boot device." ». I tried to download the tool of creation of media to a USB port and start the system using this. I can get into the menu troubleshooting but nothing works. When I try to make a custom Windows installation, it says "no signed device drivers were found". What is a hard drive problem? In the BIOS, under Boot Options is does not list a specific hard drive. It just says: 'hard drive '. Thanks in advance for any help or suggestion.

  Thanks, that's what I needed to know. Appreciate the help, IronFly.

• 2620 HP printer all in one, is compatible with windows 8

  2620 HP printer all in one, is compatible with windows 8

  Hello Peter,.

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you want to know if your 2620 HP printer all in one is compatible with your machine Windows 8 or not.

  I wish to inform you that Yes, the printer is compatible with the operating system Windows 8. However, for the installation/configuration of the printer, you can install the latest drivers for your computer using below link:

  HP customer support - Software and Driver Downloads

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-2620-all-in-one-printer-series/5357283/model/5357284

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Can I connect my HP4625 all in one directly on my ipad/iphone without using a wifi network. ?

  Can I connect my HP4625 all in one directly on my ipad/iphone without using a wifi network. ?

  Hi xxtopgunxx,

  Welcome to the HP Support forums.  I understand you want to print from your devices Apple to your printer Deskjet Ink Advantage 4625 without the printer is connected to a wireless network.

  It is possible that we can get the printer to disseminate its own network. Please note that the network will broadcast the printer will not have access to the internet.  Please follow the steps below:

  • On the front panel of the printer, please press the wireless button
  • By using the buttons on the right, highlight and select wireless settings
  • Highlight and select Restore Defaults
  • Select Yes. A message appears indicating that the default values of the network have been restored
  • Open your application settings on your Apple device, please
  • Please click on wifi and choose the network that starts with "HP-SETUP.  This should connect to your Apple device to the printer
  • Now you should be able to print using the 'Action' icon.  If there is not a print option when you press the action icon following all guidelines for Apple AirPrint

  If you go to print and your Apple device does not see the network, you will need to follow the procedure again. It should be at least 60 minutes before the HP - Setup network ceased broadcasting.

• HP Deskjet 1050 all-in-one: cannot parse with the new 1050

  I've been scanning with Adobe Acrobat 8 Professional and a Lexmark printer all-in-one.

  Printhead from the printer become blocked, and fixing was too expensive, so I bought this HP printer. Installed and it is lacking. It prints and copies fine.

  When I tried to scan, Acrobat knew HP was there and he tried the Lexmark. When I plugged on the Lexmark, he systematically planted everything I tried.

  The only change is the new printer. Somehow its installation has made it impossible for me to analyze each device.

  I'm at my wit's end. Help, please.

  Thank you

  Bob

  Hi Bob,

  Acrobat Professional 8 are supported Twain compatible devices, while the HP printer do not support Apple ICA applications.

  As a reference, you can find the following Adobe article:

  Acrobat has ICA support on MAC 10.7 for now with Acrobat XI only
  

  https://helpx.Adobe.com/Acrobat/KB/Troubleshoot-scanning-problems-Acrobat-8.html

  You can scan using Capture of Image or the HP scanning application, then open / import the digitized in Adobe.

  You can find specifications listed below, sweeping an available Twain compatible software interface only for Windows:

  http://support.HP.com/us-en/product/HP-DeskJet-1050-all-in-one-printer-series---J4/4027462/model/4027464/document/c02063036/

  You can find measures to scan with your printer in the following link:

  http://support.HP.com/us-en/product/HP-DeskJet-1050-all-in-one-printer-series---J4/4027462/model/4027464/document/c03548786/

  Kind regards

  Shlomi

• Using Dell Photo All in One printer 924 with computer Inspiron laptop with Windows 7

  I can't get my Dell Photo All in One Printer 924, to work with my new laptop Inspiron with Windows 7.  I tried the divers and untilities to load the disc that came with the printer (which I have used before with a Dell PC) but the software is not complete loading and I get no explanation.  Go to the Dell site for pilots etc was no help.

  Dell is not win7 driver/software for this model, later are for 32-bit vista

• Lexmark printer s605 all-in-one cannot connect with my computer toshiba laptop with windows 7

  Message printer cannot communicate with the computer.  How can I fix?  Unable to print my lexmark all in one single s605 printer off computer toshiba laptop to windows 7.

  Message printer cannot communicate with the computer.  How can I fix?  Unable to print my lexmark all in one single s605 printer off computer toshiba laptop to windows 7.

  Have you installed the correct drivers for Lexmark?

  Can watch it here where others have observed the you free download , that you need.
  (I assumed Windows 7 64-bit in both cases).

• Issues all in one Scanner HP with Windows 7

  Hello. I was hoping someone could shed some light on this question...

  I have a HP all in one Office Jet L7590. This device has been connected to a desktop Dell under Windows XP SP2. This AIO worked perfectly, until recently...
  I bought a brand new HP 2000 laptop (Windows 7 Home Premium 64-bit). I installed this AIO (Officejet L7590) by connecting it to the laptop Windows 7 install the drivers.  After doing this, I realized that I'd rather have all the HP installed software, so I proceeded to the HP site and retrieved the good download and installed. HP Solution Center is active and shows my AIO printer and it's stats (ink, ect). However, my issues revolve around the SCAN function. It will not work and I get various errors. I have studied this problem and see that many people have problems scanning with Windows 7. However, I can't find my specific errors, or find a solution to my problems. Most of the fixes I found relate to machines that have upgraded from vista to 7. I have not since it is a new machine with a fresh install of 7...
  I did the following without result:
  Uninstalled all the software and drivers associated with the L7590
  Reinstalled software and drivers (downloaded from HP)
  Update software thought the HP Solutions Center
  Update Windows 7
  Downloaded and run all the tools of diagnosis HP without success (stops while checking the driver and indicates that the driver is the question)
  Applied patch that was supposed to be for the upgrade of vista (which I have to lose?)
  Also tried running the center of HP Solutions in XP Compatibility Mode
  Downloaded and installed the HP software removal tool
  Let Windows HP peripheral installation and use of Windows Fax and Scan (cannot communicate with scanner)
  HP support could not help me and concluded that it was a Windows 7 problem despite this being confirmed equipment compatible. This issue is ongoing since late June of 2012 when I first contacted HP. I was hoping that a more experienced Windows 7 expert might have a solution.
  Thank you in advance.

  If you let win install the device it will use the built in the custom of whch win7 drivers provide the same functionality as the full features of HP software.

  Using the compatibility options on a program that is fully compatible win7 will give rise to other issues, so in the compatibility options, delete this compatibility that has been set.

  Not being is not quite sure of the current state, I'd do it disconect the printer, uninstall the HP software via programs & features, then use the HP software removal tool. Check that the printer has been removed from the device and printers.

  Run disk Cleanup then clean the PC restart

  Then install the software of the full functionality of the HP site, after doing so run the option to update the HP Solutions Center.

  Then re - test the printer and use the scan, not fax scan HP & windows.

  If after you have installed the HP software the sys requires a restart and your scans/tests fail, then clean boot the PC and re - test

• HP Photosmart C4580 all-in-One Printer compatibility with Windows RT

  Original title: HP Photosmart C4580 all-in-One Printer

  My HP Photosmart C4580 all-in-one printer will always be compatible with Windows RT and my new Surface?

  Hello Jade_E,

  Your printer will be compatible with your Surface RT when HP develops and releases a pilot of RT for the HP Photosmart C4580. Hope it's soon.

  Have you tried any other HP drivers when you install this printer on the Surface? Because these drivers are generic, one of the other HP drivers might work.

  If you find a driver that works, please let us know which driver he is. Thank you!

• is the 7510 HP e-all in one printer compatible with bluetooth items series?

  Can you send pictures from a mobile phone with bluetooth capability to a HP e - ALL IN ONE printer series 7510?

  Hello

  Your phone uses the different operating system, unfortunately I can't find it in this list:

  http://WWW8.HP.com/us/en/products/smart-phones-handhelds-calculators/mobile-apps/app_details.HTML?app=TCM:245 - 1044333 & platform = tcm:245 - 1044335

  But you can always send from your phone to your printer.

  Kind regards.

• Why my Kindle fire can not find my HP Photosmart Premium Fax all-in-one printer - C309a with ePrint.

  I downloaded the HP ePrint onto my Kindle Fire (first generation).  The app has been obtained from the Amazon AppStore I looked printer apps for Kindle Fire.  I use the HP ePrint with my iPhone4 and iPad 2 and can print from both of them with her.  Kindle fire can't find the printer on my network wireless using ePrint.  I wonder why this happens when two other mobile devices are easily.  Can someone tell me what I could do in order to access the printer all-in-one HP Photosmart Premium Fax - C309a on Kindle fire?

  I set up the connection on the HP printer wireless and was able to print from my Kindle on it.  However, my iPhone and iPad will be printed on the HP printer via wireless connection.

  I reconnected my USB cable at the airport, but left the WiFi of the HP printer and now I can print from the iPad and iPhone / Kindle.  My Inspiron 1525 PC and my PowerBookG4 can print on the HP printer using WiFi or via the USB connection.

• HP Officejet 5740 e-All-In-One: multiple frustrations with printer e-all-in-one-hp officejet 5740.

  I have a HP Officejet 5740-e all-in-one that has all sorts of problems: periodically decides not to print documents from one of my laptops HP or Lenovo.  Do not accept ink cartridges HP Instant ink or HP ink cartridges purchased in a store.  Unable to get decent support for this HP product.  Is essentially a disposable item now?

  As far as I know that there is no user replaceable parts in these lower end home use printers. So if nine ink cartridges do not work, and seeing that the cost of the printer is less than $ 100, Yes... it's basically a Jet printer away. Wish I had better news for you.

• HP all in one remote printer with printer deskjet 6600

  I don't have the option more to save my file scanned in pdf format, that it automatically saves it as a jpeg file?

  Yes, I know you are trying to scan. Did you follow my instructions? I was able to record successfully a file scanned to PDF on my updated Samsung Galaxy Tablet. Again, please follow the steps listed below:

  1. open your HP all in one Application

  2. click on the Scan option

  3. analyse the desired file

  4. you will notice it auto saves in jpeg format, click now in the top corner right on the settings option

  5. now, click and save the file in pdf format

  6. now gives you the ability to rename the scan

  Thank you