HP 15 r032tx: UNABLE TO SWITCH GRAPHICS (of INTEL FOR NVIDIA)

Similar Questions

• How to change the Intel for NVIDIA Geforce Graphics in HP Pavilion

  My laptop has two Intel and NVIDIA graphics card. I want to use NVIDIA but the laptop don't show me Intel graphics card.
  So I want to know when the time NVIDIA graphics performance and how used NVIDIA graphics? pls tell me...

  Hello

  Please try global settings:

  Right click on a space empty on the desktop.

  Click on NVIDIA Control Panel

  Click the global settings tab

  

  Kind regards.

• Graphic problem Intel Z580

  Hello I have a problem with graphics drivers Intel for Z580 installation for windows 7.

  Z580 (i3, 635 M GeForce, Intel HD4000, 8 GB of ram)

  Great try to install I get the error:

  This computer does not meet the minimum requirements for installing the software.

  Because of this problem, I can not install the GeForce drivers too. No idea what I need to do?

  OK I have the solution. I need to make all windows updates before installing drivers. After that, all begin to work.

• Satellite L50 - B - 1 K 7 - switch graphics Intel because AMD

  Hello world

  I have Toshiba Satellite L50 - B - 1 K 7 (PSKTCE) model laptop.

  When he has to switch from the Intel AMD graphic it turns off just without any warning. I installed the latest drivers for two graphics cards and also checked in the Device Manager for the latest versions of the drivers but the problem remains. Sometimes, for example when I turn on the Solidworks, even if it is listed in catalyst control center for high performance and must use AMD instead of Intel graphics, laptop computer still uses Intel.

  When I load something in Solidworks which has need of more graphic resources (rendering...) SolidWorks crushes down with the message that AMD driver has encountered a problem, but it is resolved (on the way this laptop back on Intel graphics).

  I use Win7 64 bit and switchable graphics system does not work. I have this laptop for less than a month and tried everything.

  Does anyone have similar problem, or some tips how to solve?

  Thanks in advance!

  > I installed the latest drivers for two graphics cards
  According to the specifications specifications page, this unit has been sold without preinstalled system.
  Therefore, it seems that you have installed the Win 7 64 bit in your own hand.

  Where did you download the drivers (Intel and ATI) graphics card?
  Have you used the drivers available on the page of the Toshiba UE driver?

  To switch to the external GPU you must right click on the desktop.
  In Catalyst Control Center Power, click on select Maximum Performance when it is plugged

  Then in global settings of Switchable Graphics also choose maximize Performance

  Then click on the switchable graphics Application settings
  Now, you would be able to add an application (game, etc) that could use this graphics card settings

  Now, just point to the exe file and add to the list of applications.
  After that, you will see the exe file in the list. Click the graphics settings and set it to high performance.

• Disable dynamic switching graphics - HP Pavilion g6-2215tx

  Notice to readers, this problem has been resolved, and results/methods have been posted below.

  I got my dv6-7205ax replaced for a Pavilion g6-2215tx DESIRE. Very well.

  My old laptop was able to run Folding@Home with 'customer-type' set to 'beta '. He folded the work units and made me some pretty * beep * good PPD. In other words, until he died.

  I tried the Beta Setup folding on the new computer laptop, for each unit of work to be rejected. Followed through similar situations of others did for them to have manufacturer or active Windows graphics drivers. Currently, I have the latest active HP drivers.

  Try to install the reference drivers for results site Web AMD in the CCC being installed, but none of the graphics drivers.

  After seeing a few posts from people in a similar boat, I found the solution for them was to upgrade the BIOS, which enabled them to change a setting, forcing the cell to rely on the BIOS to change the graphics. This enabled the Intel and AMD drivers be installed separately, therefore, they could have the reference, installed drivers I need installed.

  Updated my BIOS did not work. There is virtually no change (except a few seconds shaved my boot time). I can not turn off Dynamic Graphics Switching.

  Is there another solution? I'm a bit desperate. I also find problems with the performance of the game, either connected or not. Just a few games do not run on graphics drivers I. Update to the latest could solve these problems for me.

  Technical details:

  OS: Windows 8 Pro x 64 retail

  Graphics card: Intel HD4000 + AMD HD7670M
  CPU: Intel 3rd generation Core i5 - 3210M @ 2.5Ghz

  My folding: http://fah-web.stanford.edu/cgi-bin/main.py?qtype=userpage&teamnum=212997&username=WestJ_Fillydelphi...

  Understand a non HP recommended solution.

  http://leshcatlabs.NET/
  
  This site provides later graphics drivers for laptops Intel/AMD Hybrid Graphics active.

  WINDOWS 7 RECOMMENDED - any will do
  
  WINDOWS 8/8.1 RECOMMENDED - Version 14.1 + (acceptable Beta of earlier versions to refuse to work)

  Linux users are up the Creek without a paddle, I fear, with AMD garbage play ball with anybody. If all goes well, the revolution SteamOS corrects this glaring oversight on behalf of the company.

  Folding all is running and pulling good numbers, similar results with mining GPU.

  Leave a message in the thread if you have any problems with this or any other graph hybrid Intel/AMD compatible computers laptops.

• Unable to switch to the display of the Explorer in SharePoint

  I'm unable to switch to the display of the Explorer in my SharePoint document libraries.  I use Vista directed to SharePoint 2007.  I am currently using IE9, that first of all, the problem occurred when I was using IE7.  I upgraded to IE9 in an effort to solve the problem.  I get an error message saying "cannot find 'file://xxxx'.  Make sure the path or Internet address is correct. "Local support believes that the problem is caused by Windows updates and advised that I should completely reimage my PC to solve the problem.  Are there any alternatives?

  Hello

  The question you have posted is related to SharePoint and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://social.msdn.Microsoft.com/forums/en-us/sharepointecm/threads

• Unable to switch to digital

  Hi all;

  Unable to switch to digital. DB version: 11.2.0.1 on linux

  SYS > select DB_UNIQUE_NAME, PROTECTION_LEVEL, DATABASE_ROLE, OPEN_MODE from v$ database;

  DATABASE_ROLE DB_UNIQUE_NAME PROTECTION_LEVEL OPEN_MODE

  --------------- ------------------------- -------------------------- ---------------

  CRMs PRIMARY MAXIMUM PERFORMANCE READ WRITE

  SYS > select DB_UNIQUE_NAME, PROTECTION_LEVEL, DATABASE_ROLE, OPEN_MODE from v$ database;

  DATABASE_ROLE DB_UNIQUE_NAME PROTECTION_LEVEL OPEN_MODE

  -------------------- ---------------------- ------------------------------ -------------

  Stbycrms MOUNTED MAXIMUM PERFORMANCE PHYSICAL STANDBY

  DGMGRL > connect sys/crms@CRMSDB

  Connected.

  
  

  DGMGRL > transition to the stbycrms;

  Continue to pass, please wait...

  Error: ORA-16516: current state is not valid for the attempted operation

  Failed.

  Impossible to failover, primary database is always '' RCN.

  DGMGRL > see the configuration;

  Configuration - dgcrms

  Protection mode: MaxPerformance

  Databases:

  MRC - primary

  stbycrms - physical of the standby database

  Fast-Start Failover: DISABLED

  The configuration status:

  SUCCESS

  Thank you.

  Hello

  Given the strange combination of errors I have probably to remove my config DG broker and start over with a new broker configuration.

  http://www.Mahir-quluzade.com/2012/07/Oracle-Data-Guard-11g-how-to-safely.html

  Best regards

  mseberg

• G0T59AV: Missing Coolsense and weird problem with graphics chip intel

  Hello

  Due to many problems I had with Windows 10 I reset my windows. After that, I downloaded all the drivers from this link. I have two problems:

  1. There is no driver for coolsense in the list.

  2. when I try to install the graphics driver intel I encounter an error that says my system does not have the minimum requirements .

  P. S.

  --------

  My address is up to date.

  I checked the intel driver with Device Manager and it says my graphics driver is up to date.

  Regarding

  Hi @massoudd3j,

  Thank you for your query.

  I understand that you updated to Windows 10 but due to difficulties, you did a reset back to Windows 7.

  You install the drivers for the DESIRE for laptop - 15 t - k100 CTO HP software and drivers , but have been unable to install the graphics drivers or locate the software feel cool.

  To install the graphics drivers download and save the appropriate driver in a location known as your office.

  Uninstall and remove the graphics drivers.

  Restart your computer.

  Now try to install the driver of the saved DOWNLOAD.

  Uninstall the software Cool sense.

  Restart your computer.

  On the page of software and the driver under "Software Solution", you will find the software Cool sense. Download and reinstall.

  To say thank you for answering please click the icon below thumbs up .

  If this solved your problem, please alert people by choosing the solution provided.

  Good luck!

• Satellite NB10t-A-101 - problem with graphics card Intel using Win 10

  After I upgraded to Windows 10, The graphics card worked fine, at least 4 months later, I saw that the Intel Graphics tray icon was missing when I went into device manager he had a small exclamation mark by it and said

  Your computer's system firmware does include enough information to properly configure and use this device.
  To use this device, contact the manufacturer to obtain a firmware or an update of the BIOS of your computer. (Code 35)

  Then, I looked a little further into the problem and found this:

  Problem code: 00000023
  The problem: the resources for this device in conflict with the MCFG table.
  C0000908

  I have not edited the PC somehow, any solution to this problem
  Specifications of the PC (if needed)

  Model - NB10t-A-101
  Processor - Intel Celeron n 2810 @ 2 GHz
  Graphics card: Intel HD Graphics.
  RAM - 4 GB

  (Another note: I need the last generic graphics driver for Windows 10,)

  If Win10 supports the Intel HD graphics chip, a driver will be available in Windows Update.

  Check if your HD from Intel is compatible:
  http://www.Intel.com/content/www/us/...000005526.html

• HP Pavilion dm4: graphics driver Intel & AMD causing Windows Crash

  Hello.

  My laptop is

  HP Pavilion dm4-3107tx Beats Edition Entertainment Notebook PC.   I tried to install the graphics drivers from this link:

  http://support.HP.com/ph-en/drivers/selfservice/HP-Pavilion-DM4-3100-beats-Edition-entertainment-not...

  but I could not install the graphics card intel. It is said that the cell does not meet the minimum requirements of the graphics driver.

  I also tried to install AMD and he did. But every time that I reboot, Windows startup crashes.

  I also noticed that results for starting blocked when I recently updated my Windows, including the update for the driver intel which I have not yet installed (because I know that once I did, I do a lot of recovery and repair of the system for the umpteenth time).

  And now I feel really stressed out about it because I've been formatted my laptop for the second time, and the last time it was with the release of the pilot intel. I was stuck again started back and I got really tired of him.

  I really need help with that.

  What I have to install ALL the drivers in the link before installing graphics drivers to ensure that graphics drivers will install?

  Hi @katrinahahaha,

  Thank you for your query.

  I understand that you have a problem installing your graphics drivers.  After formatting the drive and installation of the Intel graphics driver, you have a problem starting.  Did you use the Recovery Manager to format and reinstall Windows 7?

  You only need to install the driver AMD of the HP driver page because it contains the two pilots.  Please try this process:

  • Uninstall and remove two graphic drivers
  • Restart your laptop
  • Run the HP Support Assistant to help find and install the graphics drivers
  • You can also after the uninstall, remove the driver and restart, download and install just the driver AMD.

  HP Support Assistant

  If this problem persists, try removing both drivers and using the Recovery Manager to install the drivers:

  Computers HP - using Recovery Manager to restore the software and drivers (Windows 7)

  Please let me know the results.

  Thank you! If it helps you to find a solution, please click the button "accept as Solution"down below in this message. "If you want to say 'Thank you' to my effort to help, click on the" ""Twww.Mountainview.rsb.qc.ca Up ' give me a Kudos.

• Satellite C660-220 - cannot update graphic driver Intel

  In short, I'm looking to update the graphics drivers Intel HD Graphics, the current version is 8.15.10.2189, I tried several times to get from the own Intel site but either I download bad or simply can't. I can't find the driver under the Toshiba Support. Device Manager can't find the updates or the other.

  Model: Satalite C660-220
  Part #: PSC0QE 05000CEN

  This has been a problem for about a year now, so any help would be appreciated.

  Hello

  The laptop supports the Intel Core i3 - 370 M CPU processor
  According to the page Intel ARK where you can view all the technical features of the CPU, the CPU provides internal Intel HD graphics. It was the first version of GPU HD Intel.

  I checked the Intel download page, and unfortunately, the Intel page does not provide the graphics card Intel HD (for Intel Core CPU 1 St gen) more.

  But I found a newer version of the Intel driver on the Toshiba UE driver page:
  [Intel HD graphics driver v8.15.10.2353 Windows 7 - 64 bit: http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 6013 & selSh ortMod = null & language = 13 & selOS = all & selType = 11 & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = 11 & page = 1 & ID = 79658 & DISO = 30 & driverLanguage = 42]

• I'm unable to get the registration code for my Blu - Ray player

  I'm unable to get the registration code for my Blu - Ray player. I followed the instructions and all I get is the statement: device is registered. I can't register for the most part without a valid code. Please let me know how I can get the correct code. Thank you

  If you were able to enter the registration code the first time you tried to save the player before then you don't need to do it again. Just bought this drive? If so, was it a screen or mixed open-box model?

• Can't find graphic driver intel

  model: hp r007tx

  Upgradation: improved from 4 GB to 8 GB of RAM

  OS: windows 8 (64-bit)

  Please give me a link where I can get the graphics driver intel which would be compatible for my laptop

  Hello:

  First install the Intel chipset driver and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20775 & lang = eng

  Then, install the Intel HD graphics driver and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24329

  Then install the HD graphics nvidia driver and reboot.

  http://www.nvidia.com/download/driverResults.aspx/78877/en-us

• Help! I disabled my graphics card intel on my y510p

  I feel pretty stupid. My Nvidia Control Panel does not work, so I looked for a solution online. Someone said to turn off the graphics card intel (so the system would default to the 750 m from Nvidia). I tried this and my computer was very weird. The functions of the menu (windows 8) start very well, but nothing works to the level of office. I can move my mouse and click on the icons and menus on the taskbar at the bottom of the screen, but no programs will open. I tried to navigate on my control panel through the start menu and still nothing happens. Can I do to solve this problem? Can I re-enable the onboard graphics via safe mode or something?

  Naturally, it did not fix the Nvidia Control Panel either...

  Thanks to you two, I restored my laptop and the problem is solved. It took me awhile to find the Novo key but, I didn't know yet that it's there!

  Thanks again!

• Wanted computer laptop 15-k163cl: graphics driver Intel HD 4600 stopped responding and recovered

  Receive this error on my computer laptop 15-k163cl of jealousy when you play some Flash games.  According to Microsoft, I need to update / re install the latest drivers to my Intel HD 4600.  Checked Assistant support and microsoft update and nothing shows.

  Went on the web at hp.com support page and looked at all the drivers for my laptop.  It shows the sp72044.exe as the only driver for the graphics card intel HD.  The pilot goes out with an error of "this computer does not meet the required specifications for this driver."  When I look at the readme.rtf file in the file sp72044.exe, it is said that this driver is only for Intel HD 5500 graphics.  Looking at the log file c:\Intel\Logs\IntelGFX.log shows essentially the same thing that it is only for the 5500 and abandons the installation when it is not the 4600.

  So obviously you have the drivers not listed for this computer.  A person at HP can give me the right drivers?  Should I just manually install the latest Intel drivers for the 4600?  These drivers are reported to correct arrested messages that responded to the questionnaire.  When can we expect an update HP driver of brand?

  Try the pilot direct graphic Beta of Intel. Your graphics solution is actually SoC (System on a chip) and not a graphics card.

  See the following web page

  https://Downloadcenter.Intel.com/download/25541/Intel-beta-graphics-driver-for-Windows-7-8-1-10-15-40-