HP 17-g121wm: cannot see or connect to the 5g wi fi signal?

Similar Questions

• Cannot view or connect to the Wifi network of 5 GHz with Time Capsule from Apple 5th generation

  I have a new Apple Time Capsule 2 TB with 802.11ac network support. I have setup my base station in order to disseminate the 2.4 GHz and 5 GHz network SSID. I have 2 apple (iPad Mini and Macbook Pro) time devices can see and connect to Terminal 5 GHz network however I have also a Lenovo Vibe P1 phone (dual band wifi supported) and Samsung Galaxy Tab S compressed (dual band wifi supported) and these devices cannot see or connect to the network of 5 GHz of Base Station. I also have a Cisco router that has a dual-band support and all my devices can see and connect to the network of 5 GHz of this router.  So I wonder why I have this problem with time capsule?

  I have reset my base twice station and it is a new device purchased last month.

  Any help or suggestion is appreciated.

  Did you use the SMB compatible names for everything...?

  That is to say the alphanumeric short, without spaces and Pure...

  for example base station name... TCgen5

  name TCwifi wireless

  Have you also used the password corresponding to these requirements... but can be between 8 and 20 characters.

  If so, then you must give a different name to 5 GHz and delete the password and test... If it's not yet connect the test manually on channels 36, 44, and 149 for example if you are in the USA...

• Safari Version 6.1.6 (7537.78.2) fails to open certain websites. "Safari cannot establish a connection to the server.

  Safari Version 6.1.6 (7537.78.2) fails to open certain websites. "Safari cannot establish a connection to the server.

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not

• XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon

  someone on this planet knows!

  XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).

  Hello
  I recommend that you search/post this question on the link below:
  http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
  b Eddie

• Using Reporting SERVICES report server cannot open a connection to the report server database in SQL server 2008 R2 sp1

  Hello

  I'm running Reporting SERVICES Version 2007.0100.1600.022 ((SQL_PreRelease). 080709-1414 in Visual Studio 2008 with Microsoft SQL Server 2008 R2 Express Edition with Advanced Services (64-bit) on Windows NT 6.1 SP1.)
  Everything seems to work fine except that I can't deploy: "the report server cannot open a connection to the report server database."
  Connection test ReportServer as OK in the Configuration service report manager and Visual Studio. Run reports in Visual Studio against ReportServer and my other databases.  Deployment fails on a report of VM. Remote access is enabled in the firewall, pipes is enabled in configuration Manager SQL server, the permissions for all access in Windows.
  The error in the log file of report Service:
  Library! WindowsService_1! 12ac! 09/23/2012-21: 05:12: e ERROR: ServiceStartThread: Exception caught during the startup of service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: the report server cannot open a connection to the report server database. A connection to the database is required for all applications and treatment. ---> System.Data.SqlClient.SqlException: a network-related or instance-specific error all by establishing a connection to SQL Server. The server is not found or inaccessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - error Search Server/Instance specified)
  Any ideas?
  Thank you.
  -Phil

  Just, I solved the problem I had.

  It turns out, there, there were two questions... first concealing the second.

  SQL Web browser has not been activated.  solution: in properties SQL server configuration manager, transformed the startup to automatic mode and activated the service.

  Microsoft Visual Studio project property targetdatasourcefolder had a server name that precedes the name of the folder. Removed the name of the server.  This works.

  Everything unfolds right now.

• When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  After spending most of the day on this I found that my password required to upgrade... so two of my sites are now meet Dreamweaver. And the other will be taken care by the owner of the Web site. Thank you, Nancy!

  gay

• An FTP error occurred - cannot establish a connection to the host. Internal data error. Unable to send data from network.

  Recently, I started out of the blue to get this message when I try to connect to an FTP of Dreamweaver. I have CC was last updated. I have like 50 sites, more on different servers and none of them will connect. So I don't know, it can't be a server problem. Yesterday, everything was fine. I made no change what so ever. I uninstalled Dreamweaver and reinstalled him and I get the same thing. It is not the site for 30 seconds and then exhale. As soon as I hit the button to connect as 1 second later, I get this error. I have reset all modems and routers, etc. I can't find anything online about this specific problem. I'm at my wits end. I have projects due, but cannot connect. It's Thanksgiving and trying to solve this problem instead of spending time with the family. Any help would be much appreciated.

  "An FTP error occurred - cannot establish a connection to the host." Internal data error. Unable to send data from network. »

  Nope, that is not the case, I have disabled this service and now it works fine!
  He was not the firewall, but the update 25-nov2014 of Norton Protection against vulnerabilities.  ! Norton is the note and fix it for the next update in the coming days...

  I have

  

• Toshiba Kira - Win 8.1 cannot see all files on the 64 GB flash drive

  Hi all

  Newbie on this forum. I just bought the i5 8 GB of RAM Windows 8.1 Kira Ultrabook, a great little machine.

  I have a SanDisk 64 GB flash drive that has about 20 GB on it in a dozen files. These folders and the content can be seen by my Windows 7 PC, even my mobile phone and Tablet Tower.

  However, the Kira cannot see both files, even if in the properties of the drive, he sees the space correctly. Turned on all folders and no difference.
  My wife has a 32 GB flash - no problem.

  I reformatted the flash disk, run a virus on the disk and the Kira. The Kira can someone verify the maximum size flash can see it please? I can't find it in any documentation.

  Any help or suggestions appreciated - I ran support Toshiba without a response, so maybe someone here can help you.

  Mark
  Brisbane Australia

  The appearance of the folder is not in your laptop model or your system!

  I recommend you to check some common view windows Explorer settings:

  (1) to see the hidden files and folders reported as
  Click the view tab, and then click Show hidden files and folders.

  (2) to display all the system files that are usually hidden from view.
  Click on the view tab, and then clear the Hide protected operating system files check box.

  Here you will find all the information about the folder views and behavior
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-folder-views-and-behavior

• Safari cannot establish a connection to the server

  I have try this site to opoen: https://www.infragrad org I get this error msg

  Safari cannot establish a connection to 'www.infragard.org '.

  all other web browsers work with this site no message.

  Certificates? or what else?

  IM using worm 6.2.8 in Mt lion

  If Safari says cant Safari't establish a secure connection

  https://support.Apple.com/en-us/HT204937

  You have antivirus software installed?

  If so, uninstall it.

• Cannot see other computers on the network

  Am on XP SP3.
  When I go to network connections,
  Right-click on local area network
  Click Properties under the general tab,
  Click on install and click Service
  .. all I see is a list for a McAfee driver but nothing for Microsoft. I removed my computer some time ago with McAfee & he must have created problems that I can't see other computers on the network. Is there a Microsoft driver, I need to install and which will help to solve the problem of not seeing other computers on the network.

  On the general tab of the properties of your network connection to the LAN card, you should see a box under the heading "this connection uses the following items."  Most Windows XP configurations for home use have 4 entries in this box: Client for Microsoft Networks, QoS Packet Scheduler, file sharing and printers for Microsoft Networks, and Internet (TCP/IP) Protocol.

  If you don't have these, you need to install, even if you really need not the Scheduler of QoS packages.

  You seem to have got almost to the right place, but be aware that when you click on the button 'Install' in the box, you are given 3 choices: customer, Service and Protocol.  The "Client for Microsoft networks" is obviously a "customer." 'Internet (TCP/IP) Protocol' is a 'Protocol' and the other two are "Services".

  What elements you have installed?

• Cannot get remote connection to the computer or phone

  Original title: sentinel160GB Network CCTV connection

  I have the apparently mandatory sentinel160GB CCTV and the system works OK, but for the life of me I can't get the remote to my PC or telephone connection to the or see same DVR?  Help

  Hello

  1. don't you get error message when you try to get the remote connection?

  2. you talk about Digital Video Recorder?

  3. were there any changes (hardware or software) to the computer before the show?

  Reply with answers to help you in a better way.

  Click on the below mentioned link to get an idea on how to ask for suggestions in this forum.

  Suggestions for a question on the help forums

• Cannot install: problems connecting to the server

  I have a problem when installing the new version of Skype, whenever I have install and starts to say there is a problem to connect to the server, download Skype alternative, and when I do it here it again when I install, can someone help me with this problem of server?

  What Setup you're trying to open?

  The only what you have to do is copy the Skype.exe and Login.cab files and paste these files the installation of Skype folder or even any new folder on your computer.

  If you extracted all the files from the SkypeSetup_6.18.0.106.msi file, then you should be able to find the Skype.exe and Login.cab files in:

  \SourceDir\Program Files\Skype\Phone\

  

  

• Cannot see any info in the properties of Windows Vista "Options" window

  Why the property window is not extensible to see all the info and the options open to it? I thought I read somewhere that the font size must be reduced, but I do not see an item in the list that applies to "windows properties" in the area of advanced appearance settings/personalization aspect.

  Coincidentally, I just did a lot of research and wrote a post on the IPR-related issues.  Windows 7 and 8.0 has continued to use the same Windows Vista DPI capabilities, but many improvements have been made to better address from Windows 8.1.  However I got frustrated with it and describe other ways to address here: http://cmdrkeene.com/dpi-scaling-with-multi-monitor

• Cannot share my connection to the local network via wifi

  I create an ad hoc network, and I'm not able to share with other computers or my nokia c3 phone. My phone does not detect the ad hoc network, I created

  Hello KarthikBN,

  You're other computers can connect to the Ad Hoc network you create on your primary computer?
  The connection works on your phone before, or is this the first time you are setting this up?
  If the computer detects the network but your phone is not, it is perhaps a question for Nokia:
  http://www.NokiaUSA.com/us-en/support/contact/

• Cannot see other computers on the network of the office.

  I can't see other computers on the network from my office, but if I type in \\xxxxxxxxxxx I'm able to get on the other computers on the network. How can I have them automatically appear?

  I'm terribly sorry for wasting your time.

  I realized what the problem was. I've implemented the new computer exactly as the old, same name and everything. Come and find the computer name of the computer being the same as the old conflict and did not again see what was on the network.

  So the trick was unplug the old computer from the network.