Toshiba Kira - Win 8.1 cannot see all files on the 64 GB flash drive

Similar Questions

• Master Pro XP and XP Home Slave - cannot see all files on the slave

  Hi all

  I had an old Dell Dimension, who dies, who was running XP Home. so, I removed the old hard drive and installed as a "slave" drive in a second Dimension of Dell running XP Pro. The system XP Pro recognized and installed the old XP Home hard drive as a slave with no problems. I can see a variety of directories and files on the drive slave (even the Windows directories and program); However, I don't see the 'Documents and Settings' from the old system. And of course, that's where all the data I want to access to lies. When I look at the two drives under "my computer" (XP Pro System), the (s) 'total size' and 'free space' seems correct; So, it seems that the data is there. I can't do it.
  You can provide any help will be greatly appreciated, thank you.
  Reed
  (* E-mail address is removed from the privacy *)

  No idea if it will work, but make sure that hidden files are able to see, you can also try to go to start and run and type something like "d:\documents and settings" replacing the d: with your other drive, but keep the quotation marks :D

• Cannot see all files on external drives (external HARD drive / flashdrives)

  I do not see any folder on my external hard drive, I know that these files exist because it still shows how the same amount of space remaining left on this drive. Is the same for all flashdrives I plug it into my laptop

  Edit * directories to the folders still exist, I can access when I type in my address bar, but I can't see the icon to click on it.

     

  Hello

  Windows 7 sometimes has trouble seeing external drives. Found one potential than me and other solution is to download and install the freeware Aomei Partition Assistant application, download it here: http://download.cnet.com/AOMEI-Partition-Assistant-Standard-Edition/3000-18512_4-75118871.html?tag=mncol;1 (only use the Direct download link).

  Once installed, go to the readers in question and one both select and select Properties. It is her, no formatting or partitioning required. Just select the drive is often enough to get Windows 7 to recognize.

  Post your results here and let me know how you fare.

  Kind regards

  BearPup

• I uplaoded a shared review in a digital system and cannot see all comments after the file is deleted from the review tracker. What is going on?

  When I do not remove the review of the Scout, the comments show. I don't want to use all my memory on the conservation of the comments in the review tracker!

  I think that this is on purpose.  The review of files is deleted on the server if the author removes their "Sent" in the Adobe Tracker program review file review.  What we do is: once the review is completed, create a copy of "archives" that has the comments embedded permanently. Then you can remove it from your tracker, which removes the review and comments. Adobe sees comments shared as temporary spaces, I guess. Logic, if you look at it this way.

  If your procedure requires to keep a review will never, well, I guess you need to keep in your tracker.

  You can hide the old comments by creating a folder and moving them here (right click "sent", "create a new folder"). I don't think it's "with the help of your memory".

  Roger

• Cannot see/access files on the external hard drive in Windows XP

  I removed the HDD from my PC because I was getting a new PC. I plugged it (USB) to a netbook to get my files. He sees the drive, but I can't see/access my files. Both are Windows XP. Is it because the removed drive was setup with administrative privileges in Windows XP on the old machine?

  Hello

  1. it works on another computer?

  I suggest you to take the permissions of the drive and check if it helps.

  Follow the steps from the link below that would help you to take possession of the car.

  How to capture a file or a folder in Windows XP: http://support.microsoft.com/kb/308421

  Hope this information is useful.

• Cannot install download files on the generator on new glassfish

  Hello
  Running Application Express 4.1.0.00.32 on Oracle Glassfish Server 3.2.1. Our new facility is in place and do us our applications up and running for the most but with a weird thing. We cannot transfer all files on the generator of the Apex, for example an image or an export request export. After navigating to the file by clicking 'next' in the Import Wizard generates a message "the file must be selected for upload" and the path specified just disappears from the display.
  
  Sorry to post on the forum of listner, but it "feels" as a kind of a problem of front end with the new facility. Others post similar topics on the forum of the apex and say: there is a bug in glassfish How to transfer files to the apex
  
  This post refers to the other off the coast of the Forum post where you can download a patch of glassfish. But hey, I'm paying for an official Oracle glassfish, I must post an sr for this?
  
  
  
  Thank you
  Steve

  Hi Steve,.

  We have discussed this here even before the thread you referenced: {message identifier: = 10205967}
  Of course, this fix is intended to be used for GF OSE, not the version with support.

  But hey, I'm paying for an official Oracle glassfish, I must post an sr for this?

  That's how you get help for this. Maybe "My Oracle Support" (formerly known as Metalink) has already a bug filed for this and an official patch to download. This forum is not intended to replace or duplicate content published by the official product support.
  On the other hand, your version number seems inaccurate: the most recent Oracle GlassFish Server available today is 3.1.2.2. If you are running on 3.1.2 you must download the Patch 147904-06 (assuming that you are on Linux, get the patch for your operating system if it is different). This will update your GF in 3.1.2.2, which is what Oracle Support will usually ask you to do if you open a service request for a product running on an older patch level.

  -Udo

• Win 7 computer cannot see the computers on the network

  We have 3 computers on our network. A desktop computer running a laptop running Win 7 x 64, an office equipped with Win Vista and Win XP. All 3 are connected to the same workgroup and are properly connected to the internet. The two workstations can see and the laptop on the network and can move the files to the laptop, but the laptop cannot see other computers on the network. Whenever I try to open the network to move files to another computer, the icon just mouse sits and turns and the page remains blank. I thought that maybe he just needs time to see everything, left like that for hours without success. I went through all the troubleshooting steps in the win7 with nothing working Help Center. I don't understand why, if all the computers are on the same network, they can see me, but I don't see them. I am obviously connected properly so they can move the files to my computer. It may be unrelated, but I also can't update windows, keep getting error 80246008 when I try to run the update. Any suggestions on what I can do to fix this?

  Hello

  You can try the following steps and check whether the problem is resolved.

  Step 1:

  Networking of computers running different versions of Windows

   http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

   

  Step 2: Now, you will need to follow the links provided below to check if you are able to connect to the home network.

  Home Sweet homegroup

  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

   

  Step 3: Now, you will need to visit the link that will help you solve network problems.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Now, you can follow the steps in the link below

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-join-a-HomeGroup

  Windows Update error 80246008

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80246008

  It will be useful.

• Error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer.

  Original title: trying to download

  WinXP SP3, Security Scan run and d/ld: error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer. What to do now would be much appreciated.

  Also have a related problem about MS Maliciouws software removal tool. For download, but read in the KB that: in XP, the vacuum cleaner will remove the malware, but doing so may trigger the File Protection Win with damages to my operating system.  the tool will attempt to repair the damage, but to rehabilitate prior to infection, that I need to insert the CD of Win. As my computer came with Windows preinstalled, I do not have a disk and will not take the risk of damage, that I can't fix. Do I not download or not... ? Another solution... ?  I also fear that this tool could settle into the routine Win Update and need guidance on the prevention of this facility, if possible, or what to do if it cannot be prevented.

  It can have nothing to do with any of the foregoing. " I'm relaying only because it occurred during the same mission of update: had msg of error that Win Firewall has not been set as a default, which reset, but found this hidden file when searching for the Protection of the customer: "Win 32/Hackdef' - it was a config with the extension ini file and was deleted by Scan."

  Thanks a lot for any assistance.

  scate 39

  Hello

  ·         You have Microsoft Security Essentials on your computer?

  If you have windows installed on your computer security essentials, then you will not be able to install Windows defender. Windows Security Essentials has antispyware component installed.

  You get the error because you have installed MS Security Essentials, which has its own function to antimalware. You don't need or want to install Windows Defender, too. Leave MS Security Essentials installed and do not turn it off.

  See also:

  You can turn on or turn on the firewall in Windows XP, please see the link below:

  http://support.Microsoft.com/kb/283673

• Win 7 paint cannot save PNG files error "Paint cannot save these files Save was interrupted, so your file has not been saved.

  Original title: Win 7 paint cannot save PNG files

  It use to work properly until I tried a free photo editor witch did not work anyway.

  After you remove the free photo editing software, I find myself with this problem

  I can always open png files, but cannot save any png file.

  This is the message I get with only PNG files

  Paint cannot save these files.

  Save was interrupted, so your file has not been saved

  All ideas

  Fixed

  I have restored all of the changes made by Advanced System Care 5 now everything works.

  Advanced System Care 6 upgrades done a registry clean with no problems this time.

  It seems therefore that the registry clean was the problem.

  It does not look like it cleaned everything more then old software keys and the extensions that I use more.

  Thanks for the help

• SVN: #155021. You cannot update this file with the help of Dreamweaver Subversion integration because a new Subversion client application on your machine has made updates to the file Subversion meta data. For more information on this problem

  Can Hello anyone help?

  After you configure Subversion in Dreamweaver, I get this error again!

  SVN: 155021 #. You cannot update this file with the help of Dreamweaver Subversion integration because a new Subversion client application on your machine has made updates to the file Subversion meta data. For more information about this issue, see http://www.adobe.com/go/dw_svn_en.

  even after following the instructions http://www.Adobe.com/go/dw_svn_en Download the extension, python change the var in windows to say «;» C:\Python26'

  with & without quotes, with or without; before C

  command > comparability of Subversion to get the following error "the Conversion process has failed. Please make sure you have Python installed and you check Python PATH parameter'

  I managed to get all the files after the installation, I locked, unlocked and commit a file to test fact so that was all works well, the only part I'm not retrieves the latest version, this is because Subversion is 1.6.2 and dreamweaver must revert to the version 1.4.5 on local to work, the compile someone at - it an idea what to try next in order to make it work?

  Just a reminder!

  1. I configure Subversion through guidelines on http://help.Adobe.com/en_US/Dreamweaver/10.0_Using/WS80FE60AC-15F8-45a2-842E-52D29F540FED. html
  2. I managed to get the latest SVN version
  3. Lock, unlock and commit a file
  4. Installed Python in C:\Python26 change the path in windows system properties > advanced > Environment Variables > system variables > New > Python =; C:\Python26 also C:\Python26
     
  5. I also tried the same thing in the User Variables
  6. Installed the extension DW Subversion compatibility
  7. 
     Tried to run the compatibly with the command > Subversion comparability in DW
     

  Welcome any suggestion to solve this?

  Hello

  There has been a lot of problems using svn with dw, and I know many people who have stopped trying to operate correctly.

  As much as I know dw will not work with newer versions of svn (over 1.5), and even then, there are a lot of problems, a possible solution is to try subweaver (at- http://code.google.com/p/subweaver/ ), as this has solved some of the problems associated with the use of tsvn dw environment.

  PZ

• "Information MS cannot open this file. The file may be corrupt or incompatible with this version of the information system. »

  Original title:

  MS Info

  I need to send a file Ms Info to Wb tech support so that they can help me with the game on steam download. Whenever they open the file it says it gives the following message "information MS cannot open this file. The file may be corrupt or incompatible with this version of the information system. "I tried to open it too and had the same error message how can I send a file not corrupted for them?

  Information MS cannot open this file.

  They should use Notepad to open the file when it is a txt file.

  Another way to create a portable system information file is to select the hotkey Win + R, type msinfo32 , and press ENTER . Click file, Save and name the file. This method creates a file with an extension of nfo file. Perhaps the recipient expects the file in this format.

• Managed to install XP Mode but cannot find "Windows XP Mode" in the folder "Windows Virtual PC" and also cannot find any file with the extension of the vmc

  Dear friends,

  I'm using Windows 7 Ultimate 64 bit

  I'm really happy with the answers given on this subject, but after the installation of "WindowsXPMode_en - us.exe" and "Windows6. 1 - KB958559 - x 64 - RefreshPkg.msu ".
  installation went well but I can't find any file on my computer with vpc extension, and I don't see the Windows XP Mode folder in Program Files.
  When I try to reinstall, I get the message that it has already been installed.  In folder options, I enabled see all files including system files.
  Thank you!

  Thank you very much!!!

  After I posted the question (and struggled with the issue for a while),
  I decided to uninstall Virtual PC and XP Mode, and then when I reinstalled
  them everything was fine.
  In any case thanks for the elaborate and useful response which I'm sure
  others will benefit from it.

• Is there any application that searches all files on the disk or server which also indicates the total and available space?

  Is there any application that searches all files on the disk or server which also indicates the total and available space? And after a search, it can also be exported to excel for further analysis?

  Hello

  See if that helps you.

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Here's how to understand Treesize Screenshots:

  http://www.Jam-software.com/treesize_free/screenshots.shtml

• Open all files in the selected folder .indd

  Hi all

  I want to open all files in the selected folder .indd.

  Try the script:

  myFolder var is Folder.selectDialog ("select a folder with the InDesign files");.

  var myFiles = [];

  var myFileList = myFolder.getFiles ();

  for (var i = 0; i < myFileList.length; i ++) {}

  var myFile = myFileList [i];

  myFile.name.match(/\.indd$/)

  myFiles.push (myFile);

  App.Open (myfiles)

  }

  Can someone give a solution to me.

  Thanks in advance

  BEGINNER

  myFolder var is Folder.selectDialog ("select a folder with the InDesign files");.

  If (! MyAccount)

  Exit (0);

  var myFileList = myFolder.getFiles ();

  for (var i = 0; i)< myfilelist.length;="" i++)="">

  var myFile = myFileList [i];

  (Si (myFile instanceof fichier && {myFile.name.match(/\.indd$/i))}

  App.Open (MyFile);

  }

  }

  See you soon,.

  Stephen

• Entering a project LV file in VSS, all files in the project are omitted. Only the shell project and settings are vs. No idea why?

  Entering a project LV file in VSS, all files in the project are omitted. Only the shell project and settings are vs. No idea why?

  Chuck72352,

  Hello! It's my understanding you need to add the files separately to Source Code control with the .lvproj file.

  This is a lot of information on Source Code in LabVIEW control practices.