HP 2000-2B80DX cannot retrieve using disks

Similar Questions

• Satellite U940-101 cannot retrieve using external ODD

  Hello

  I just ordered a Satellite U 940 - 101, but did not have the USB key recovery.
  Then, I could not enter the win system 8.

  * So I bought the recovery CD and an external DVD RW Drive. *.

  The problem is that I have chosen "* boot from the DVD - RW *", I * couldn't system recovery *.

  "Your PC needs to be repaired."
  A device necessary isn' there connected or are not accessible

  "* Oxc0000225 error code."

  What can I do? Thank you!

  Hello

  Go to BIOS (F2) and disable UEFI MSC mode and secure startup.
  Then you can check again if you want to be able to boot from the external USB DVD/CD-RW drive.

  To be honest I m not very well if the boot from external CD/DVD drive is supported by the BIOS. I found just the bootable devices and supported:
  Drive floppy USB, primary HARD disk, USB drive, Network (LAN)

• HP Pavilion 2000 - 2b80DX Webcam Windows 7 driver

  I left Windows 8 for WIndows 7 Home Premium (64 bit) early-on and I managed to get everything works EXCEPT my built in webcam.  Any ideas where I can find a driver for this?

  Thank you!

  Figured it out based on this chaps video: http://www.youtube.com/watch?v=jOpS6GD0hZo

  my hp 2000-2b80dx had a useful piece of tape holding the connector... I have snugged it upward and now everything works fine.  Terrible design.

  -Nick

• I have a computer that has Windows 2000 Pro, I can use the disk to upgrade to Windows XP with this OS?

  I have a computer that has Windows 2000 Pro, I can use the disk to upgrade to Windows XP with this OS? It's

  an old computer, but it works very well.  I want to switch to XP using the Windows upgrade disc. But

  in the specifications it lists only 98, 98 Second and ME as an operating system you can upgrade.  Thanks John

  Provided the specifications of the computer meets Windows XP you can switch from 2000 to XP. If it does not meet the specifications, you may upgrade the computer first or get a new one which is more cheaper today.

  In addition, please note that you can only switch to Windows XP Professional. If it is a home edition you have then it will not work. You can refer to the link below on how to update your copy of Windows 2000 to Windows XP Pro.

  http://support.Microsoft.com/kb/978307

• Error - Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes. If the drive is not formatted, you must format it before you use it

  Original title - Windows cannot read blank disc

  When I insert a blank DVD-R disc for burning, an error is indicated - "Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes." If the drive is not formatted, you must format it before you use it. "So I can't burn a DVD-R disc... But if I use the DVD-RW drive, it can be burned smoothly without any problems... Windows cannot recognize only the DVD-R disc... My DVD - RW driver is Sony Optiarc AD - 7280S. When I use Windows 7 without problem was found in the burning a DVD-R disc. But after using Windows 8, I can't burn a DVD-R disc. So please help me...

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a problem with the disc.

  As you mentioned that you have tried the steps of troubleshooting mentioned in this thread.

  I suggest you run the Fix-it tool and check if it helps.

  This tool diagnosis and repair CD or DVD drive issues, when you can not burn or play CD or DVD discs when a disc is not found, not available or not connected.

  See the link below.
  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems?WA=wsignin1.0

  As we have tried most of the troubleshooting steps to resolve this problem, and if the problem persists after you run the tool fix - it also. So, I suggest to get in contact with equipment manufacturers , because they will be the best person to help you.

  Hope this information helps. Please let us know if you need additional assistance. We will be happy to help you.

• ORA-01124: cannot retrieve the data file 1 - file is in use or recovery

  I'm trying to recover the database in waiting, but it gives the error below.
  
  ORA-00283: cool cancelled due to errors
  ORA-01124: cannot retrieve the data file 1 - file is in use or recovery, the recovery is already said
  ORA-01110: data file 1: ' I:\ORACLE\QAS\SAPDATA1\SYSTEM_1\SYSTEM. DATA1'
  
  When I checked in the alert log recovery is not started. and later I hae given ' alter database recover Cancel "and the command to meet with the threshold.
  
  "media recovery has not started.
  
  It seems that the recovery was stuck between the two.
  Please advise me how to kill the recovery session that is stuck. because I don't want to bounce the database pending.
  
  Thanks in advance.

  Dataguard and MRP, you run a script before.

  In a standby scripted, a session to RETRIEVE the DATABASE would an UNTIL clause (SEQUENCE up to THAT most likely). At the end of the recovery at this point (SEQUENCE #), he left and stop at the database.

  In addition, the script is such that when a RECOVERY session is active, another session is not authorized to start. It can loop in pending state or go out and do it again the next scheduled interval.

  Apparently your startup script is not strong enough to prevent another session of RECOVERY to start even though the first is active (or it doesn't have a good up to THAT clause and stop, exit, closing stocks)

  What you have is a custom implementation of a database of pending. Without all the details of the script, the 'blocking' between sessions (to avoid a second RECOVER start when one is already running) etc... We can't really do much to help you.
  Your scripts must be standing with status information. It should be possible for you to discover the 'other' sqlplus session which emanates a DATABASE to RECOVER, but not yet out (p. ex... How about a simple "ps - ef |") grep sql' and ' ps - ef | combination of grep ora"?)

  Hemant K Collette

  Published by: Hemant K Collette on May 29, 2013 17:47

• This disk cannot be used El Capition

  Mac users,

  I have deleted the partition of "Mac Hardrive" accentually when installing a corporate image with the player on a new machine retina iMac 4 GHz i7 in recovery mode. I tried to reinstall on the internet after erasing a disc, however, I get the message error "this disc cannot be used to start your computer." When you are prompted to select a drive to install also.

  This machine is less than two months.

  I'm dead in the water, or Apple Store bound?

  Thanks for any help

  The guarantee gives the right to the free phone support for the first 90 days of ownership.

• Cannot use disk, error: Disc Copier could not find a CD-ROM drive supported. You will not be able to make copies of the disc to another.

  Original title: follow question Winsows XP repair

  I get following messages is displayed when I try to use disk functions.  #1 API can not see all CD ROMS in the system, please check to see if they are properly plugged...

  #2 disc copy could not find a CD-ROM drive supported.  You will not be able to make copies of the disc to another.

  Should I take the modem to a computer repair shop to get this repaired?

  Hello

  I suggest to refer to the procedure described in the following article and check the status of the issue.

  Error messages occur when you run Easy CD Creator in Windows XP.

  http://support.Microsoft.com/kb/285910

• I have to ios9.3.3 a 6s and updated iPhone and cannot retrieve old messages

  I have a 6 s iphone and updated to 9.3.3 iOS and now cannot retrieve old messages. I receive mail. I have not updated my ipad and can't receive old emails on this bequest is

  It is a POP email account? Have you set up things so that the device stores messages on the server for a certain period or until you remove them? If this isn't the case, message may have been deleted once delivered, so cannot be delivered again. See get help if you have any questions using a POP with multiple devices - Apple Support email account.

  TT2

• HP DV2700 - Vista using disks fails to make the preinstallation of office software

  I'm trying to help my daughter long distance.

  His laptop crashed and she didn't know why and impossible to restore using disks or F11.

  She is more concerned about its data and had the drive removed and placed in an external USB enclosure to access its files later.

  A new HARD disk has been placed and she began to do a restore from the disks, she did years back.

  Everything went along and then at the level of the office, she said that it is on part 2 to preinstallation of software

  and he gave him a warning that windows cannot complete the installation.

  She restarted and got a screen that said Windows installation.

  She tries again to the procedure.

  While that's going on, can someone tell me what could be the problem?

  One of the most common causes of this problem (that I've seen) is that most new hard drives sold today are Advanced Format that triggers Vista and Windows 7 recovery discs. If she can get a disk hard no AF, it should have better luck.

  Sometimes, it works to prepare a new hard drive with the utility from Cyberlink cd first. Download and save the file. Once the download is complete, place a blank cd in your drive and click on the downloaded file to create a boot cd. Start with this cd and wait until you get a green check mark indicates the hard disk is ready. Remove the cd, insert the first disc of recovery and restart the laptop.

  http://ftp.HP.com/pub/softlib/software11/COL32372/PV-80183-1/sp44645.exe

• Satellite A200: Cannot properly use external USB devices

  I encountered a problem with my Toshiba laptop and I can't fix it, and I'm in need your help please...
  The problem is that when I connect a USB portable device (an external hard drive, USB, iPod, Flash memory... etc) with more than 8 GB of memory...
  It is not properly installed in the Device Manager and appears under "USB bus controllers.

  But it does not say that it is an unknown device. It normally appears with his name, but he is not properly installed (it does not say that either) where it is supposed to be a camera under "imaging devices" in a specific category (hard drive under "drives"), and so on

  And I can't use the unit because the HARD disk does not appear in 'My computer' and my iPod cannot be used

  I would like to inform you that this problem is with all USB devices with more than 8 GB of memory.
  Not a single device. I tried a lot of features to ensure that it is not a problem with the unit.

  So this is a problem with my laptop and I installed Windows several times but no progress.
  Thanks for your help in advance...

  Is it XP or Vista?

  If its XP, make sure you have at least Service Pack 2.
  This hotfix can help XP see large capacity media:
  http://support.Microsoft.com/kb/934428
  but that doesn't really affect USB external HDD.

• Satellite A50-111: I get an error: cannot install MBR disks

  I have a satellite A50-111. The system with the error would not start a system disk and tried to boot from the network.

  To get the pc working, I tried to reinstall Win XP Pro, but I get an error: cannot install MBR disks

  How to solve this?

  Jon

  Hello

  Have you tried to install the unit using the supplied restore CD?

• Satellite A200-1AE cannot find my disk hard flash

  Hi to everyone.

  I have a SATELLITE A200 1AE and I have a little problem...
  My phone cannot find my disk hard flash. I contact toshiba here in Greece, and they told me that they don't know what to do!

  Can you help me please?

  THANKS ANYWAYYYY

  Hello

  Can you please write a little bit more kill your issue? Since when you noticed this problem? What did you do last time? Maybe installed WXP and now the HARD drive is not visible for the BIOS or does not appear when you use F12 at startup?

  Please write a little more. I don't think that the service can't do anything.

• Video card issues 'Windows cannot read this disk. The disc is maybe damaged or it could be in a form that is not compatible with Windows.

  Original title: card video questions

  My company adds two monitors to existing systems that are also running good XP and windows 7. Everything goes smoothly with the exception of one system using windows XP. I replaced the original video card (ATI DELL X 1300 128 MB VIDEO CARD in the PCI-E DVI TV-OUT) with nvidia GeForce 8400 GS and when I try to install the drivers through the disk, I get the following message: "Windows cannot read this disk. The disc's might be corrupted or it could be in a form that is not compatible with Windows. I flashed the BIOS, but still nothing. Do I need a different video card?

  Hi TheRealBradB,

  ·         The computer is on a domain network?

  You can download and install the drivers from the nVidia GeForce 8400 GS video card for site.

  GeForce 8400 GS video card

  http://www.nvidia.com/page/GeForce8.html

  You can run the Autodetect your GPU and check the drivers.

  Also contact nVidia support for help on the issue.

  NVidia support

  http://www.nvidia.com/page/support.html

   

  Hope this information is useful.

• Error: Windows cannot access the disk.

  I burned a dvd backup of certain data (downloads, bookmarks, photos etc.) files using windows drag and drop in the dvd player.

  The burn has been successful I was able to use it immediately, however, on the second (and subsequent) attempts to access the files burnt a windows error appears indicating that windows cannot access the disk.

  Like all other discs are able to be accessible to all without problems, there is no problem with dvd players?

  Please let know us that it's the only backup I have these files.

  I burned a dvd backup of certain data (downloads, bookmarks, photos etc.) files using windows drag and drop in the dvd player.

  The burn has been successful I was able to use it immediately, however, on the second (and subsequent) attempts to access the files burnt a windows error appears indicating that windows cannot access the disk.

  Like all other discs are able to be accessible to all without problems, there is no problem with dvd players?

  Please let know us that it's the only backup I have these files.

  ========================
  If these files are very important... the
  software suite may be worth a try:

  IsoBuster
  http://www.IsoBuster.com/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.