HP 2000Notebook PC 0xc0000185 error code

Similar Questions

• Windows 8 Acer 0xc0000185 error code

  Hello. When I turn on my Acer all in one desktop PC, I get a blue screen titled "Recovery", as below. I followed the instructions on several forums and have tried to re - start and have already downloaded files of Windows 8 Installing on a USB stick to boot from, but it just doesn't let me do. I changed the boot order in the BIOS so that [removable device] is the 1st boot device, but when I switch on the PC it still goes to the blue screen with the message "Recovery". I tried the USB in all available ports, as well as to unplug all other USB (except keyboard), but he won't take it. Any suggestions?

  

  Hi Alex,

  I understand that you are getting the error BSOD 0xc0000185 and the system can be recovered.

  I appreciate to the troubleshooting steps you have tried so far.

  With the help of a Setup disk, you can perform the following troubleshooting methods and check if this helps solve the problem.

  Method 1: Start the recovery environment with the installation of Windows 8 media.

  It is another way to boot the PC and launch recovery tools when something goes wrong with the operating system.

  Please follow the steps below. Insert the DVD to install Windows 8 on DVD-ROM and restart your computer.

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  (b), select the exact time and the type of keyboard .
  (c) click on repair your computer in the lower left corner.
  (d) select Troubleshooting to Choose an option screen.
  (e) click on Advanced options Troubleshooting screen.
  (f) click Auto repair screen Options Advanced .
  (g) then choose the operating system by clicking on its button.
  (h) Windows 8 will then look for problems on the hard drives and verify that all required files are intact.
  
  Method 2: Rebuild BCD from the command prompt.

  After you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  (b), select the exact time and the type of keyboard .
  (c) click on repair your computer in the lower left corner.
  (d) select Troubleshooting to Choose an option screen.
  (e) click on advanced options in Troubleshooting screen.

  (f) click on command prompt and run the following commands.

  Type BOOTREC /FIXMBR, and then press ENTER.

  Type BOOTREC /FIXBOOT, and then press ENTER.

  Type BOOTREC /REBUILDBCD, and then press ENTER.

  Method 3: run the restoration of the system of the Advanced Options screen.
  
  System Restore to restore your computer to a previous state, quickly and easily without losing any of your files and personal settings. Sometimes when you install programs or drivers, they can affect some system settings and prevent other programs to function properly. You can use system restore to restore these settings to their previous state
  Follow these steps:

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  (b) select the good time and the type of keyboard .
  (c) click on repair your computer in the lower left corner.
  (d) select Troubleshooting to Choose an option screen.
  (e) click on advanced options in Troubleshooting screen.
  (f) select System restore.

  After the system restore your documents and files will always remain to their previous state.

  Please follow the suggestion above and let us know the results.

• How to fix 0xc0000185 for windows error code 8?

  At Best Buy a few months ago, I bought a laptop computer bundle, which came with a laptop ASUS, model number ATHEROS/AR58225.  I was about to go on the internet and all the computer completely frozen.  After about three minutes of waiting, I just it turned off by holding the power button.  Once I turned it back on, he said that my pc had to be repaired and he showed me the 0xc0000185 error code.  It says that I need an installation with a DVD or USB device.  Because my computer has a DVD drive, I could only try to download it from the internet.

  Then came my second problem.  Before you start anything with device installation, I needed a product key.  Windows 8 came pre-installed on my computer, so I do not have a purchased package where I could find the product key, and my computer does not have the product key on a sticker on the bottom.  Neither the bundle came with a manual, so I'm absolutely stuck.

  Then what should I do?

  Moved from the installation of XP, set at level and activate Forum.

  Lynn

  I don't know how you can retrieve your product if there is no sticker on the unit, but you can try to contact ASUS to support through the page linked below.

  Contact ASUS.

  http://VIP.ASUS.com/VIP2/services/QuestionForm/TechQuery

  How to find the serial number of the product
  http://support.ASUS.com/repair.aspx?No=566

  Good luck.

• Windows 8 error code: 0xc0000185.

  When I start my laptop Asus in Windows 8, it displayed the Asus logo but the logo, he says "Preparing auto repair" then it goes to a blue screen that says: "your PC needs to be repaired a required device is not connected or is not accessible." "Error code: 0xc0000185 you'll need to use the tools of recovery on your installation media" ect. also when I press F8 for the startup parameters bring me something like that ' leader: \Windows\system32\winload.efi "error Code: 0xc000000f '...» Help, please! Also, my laptop has been cut itself even when it is fully charged... I would be much appreciated if someone could help me. Thank you for your time.

  Hello Ana,

  Please keep us updated on the status of the issue.

  Windows 8 was preinstalled on your laptop?

  If Yes, then I suggest you to contact Asus support team and with the help of this serial number, they may be able to help for the product key.

  Hope this information helps.

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  Thank you

• Error code: 0xc0000185 - laptop fails to find CD drive

  Hello

  Would be great if you could help me!

  After a frozen screen and a hard reboot, my Sony Vaio not boot up but goes rather in the loop of the first showing the Sony logo, then moving to a black screen with a white dot in the upper left corner. I tried to retrieve / maintain the system through F8 but nothing happens outside of the computer go in above mentioned loop again.

  I finally gave up saving all the data, so I tried to use the recovery media (CD created when I got the laptop - I don't have any other CD of Windows 8 as it comes preinstalled on the machine) to get it back. So when I come back in fashion relief (i.e. F8) and select start media, the computer does not seem to detect the real CD player, even if I inserted the first recovery CDs. Also, I changed the BIOS setting so that the computer boots from the CD drive first. Finally, I see a bluish light screen font Windows & saying style

  "Recovery".

  Your PC needs to be repaired. Configuration of boot for your PCIS data missing or contains errors. Leader: \EFI\Microsoft\Boot\BCD

  Error code: 0xc0000185

  You will need to use the tools of recovery on your installation media. If you don't have any installation media, please contact your system administrator or the computer manufacturer.

  Press ESC for UEFI firmware settings

  I then press ESC and everything starts all over again :(

  Thank you very much in advance for your efforts!

  AJ

  Hello

  Try to select the key for Boot Options when the logo appears SONY...

  The key is different for different manufacturers... Could possibly be F9 or F11...

  You can probably also change this setting in the actual Bios as well...

  My HP laptop requires that you press the escape key and then displays a menu with the options F #...

  As you noted the EFI error, it could be that your machine is trying to start on the bad device...

  No device in reality, but a file on your HARD disk...

  When you use EFI\UEFI Bios, the machine starts by starting the EFI file and then is redirected to Windows... Try to set the startup type selection EFI\UEFI Option... The actual name varies a bit depending on the manufacturer.

  A lot of machines that run EFI\UEFI Bios won't boot from a DVD drive... They usually start from a flash drive, but can even be difficult...  It is a type of 'Security' of the thing.

  There are two settings in your BIOS, you may need to disable it to get the machine to boot from the DVD drive...

  Start with QUICK START and then SECURE BOOT...

• Windows 8 facing c0000185 error code

  Hi all

  I have lenovo z580, im a problem during the startup of windows 8.

  The boot stops at the Blue error screen saying bad_system_config_info and error code is 0xC0000185.

  Main problem is that I don't have my os as capable boot disk or usb to... I don't know the key to product also... I wanted to recover as

  Could someone help me on this please.

  To respond to your request, if the operating system is installed on the computer, your computer manufacturer may be able to provide the drive according to their policy.

  Kind regards.

• error code - 50

  I was trying to update my I-phone with IOS 10.02 6.  While it was updating the phone, I received an error code-50.  the phone is now stuck and I can't seem to exit the mode "update."  What does this error code mean?

  Error code - 50 on iPhone

• I keep getting an error code (-1) cannot restore iphone message what can I do?

  My iphone 5 c don't continue reading 'no service' or 'research', but it has service through Verizon, I tried to switch to airplane mode, turning turn off / turn on the phone and restore with itunes, but during the restoration it shows error message - 1 will not restore, is there anything else I can do?

  Try to restore 2 times more. If get the same error message

  take the iPhone at the Apple store nearest for a free evaluation.

  Once the diagnosis is complete, staff will explain your options.

  -1 is the hardware failure error code. Assuming that no damage to the

  your iPhone is not jailbroken, you may qualify for a reduction

  the price of the replacement warranty.

  Make a Genius Bar reservation to avoid delays.

  http://www.Apple.com/retail/Geniusbar/

• What is the error Code (-18)

  iPhone 6 sec more

  iOS 10.0.1

  Get an error code (-18) what this code means?

  Some parts of the phone have been replaced lately?

  What's your iTunes updated to the latest version?

• I have several items in my trash that I can't remove. I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) "when I try to do.

  The operation cannot be performed because one or more required items be found.

  (Error code - 43)

  I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.

  I'm using an iMac with OS X El Capitan 10.11.6 operating system

  Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?

• Can someone explain please the 4SNS/1/40000000 error code: TMOP - 127.875 and how to solve the problem?

  AHT error code.

  You have problems? Why do you run Apple hardware *?

  Of

  http://www.CNET.com/news/how-to-invoke-and-interpret-the-Apple-hardware-tests/

  which would indicate a bad sensor on one of your memory modules or riser:

  In the case of an error in probe (4SNS), to determine what type of sensor is referenced, look for his first letter, which should be 'I' for the current "V" or "T" for temperature, voltage.

  Then check the second letter from the list below to see which component it refers to:

  A: ambient air sensor
  B: battery
  C: Central processors (CPU)
  D: DC (direct current)
  e: PCI-express slot
  F: FireWire port
  G: graphics processor (GPU)
  H: drive
  h: heat pipe (heat sink)
  L: liquid crystal display
  M: memory or the memory riser cards

  I would first install a monitoring app like Mac Fan Control of temperature

  http://www.CrystalIDEA.com/Macs-fan-control

  to see of you can find a bad sensor by reading the memory riser card.

  You have a MacBook Pro as indicated: MacBook Pro, OS X Yosemite (10.10.5)

  Since this is the Mac Pro desktop forum

• 4SNS/1/40000000 error code: VDOR - 18.678 & 18.679

  MBP early 2011: I just ran the AHT twice, the first round gave me an error code of 4SNS/1/40000000: VDOR - 18.678, second inning gave the code 4SNS/1/40000000: VDOR - 18.679. Does anyone know what are these error codes? My best guess is probably the RAM, I have (2) modules of 8 GB 1600 Mhz DDR3 OR wireless networking equipment installed. I've noticed recently while multitasking, the wifi connection seems to cling and web pages will not load/downloads will pick up. But the way in which applications will be blocked for 60 seconds makes me think of a bad situation of RAM I have had in the past. Any help would be greatly appreciated since the nearest bar genius lies in 2 1/2 hour. Thank you!

  No RAM - 4SNS is a sensor error.

• Transcend Jet 360 Lite SD care & "the operation cannot be completed because an unexpected error occurred (error code - 50)"

  Have used the SD Transcend 360 256 MB card for data storage with success during the last 6 months on my MBP to mid-2014.  Installed their wake from sleep early support software.

  Above error code invite you in this context: I wake up Mac in the morning after sleep.  Transcend icon "wake up" and appear on the desktop (as it should).  I check disk utility and the card is recognized.  HOWEVER, about 1/3 of those mornings, despite appearing and functional map icon (folder open when I click on it), when I try to write/copy a file or folder to it, I get the above error code?  For about a week I missed that everything seemed normal.  My current 'fix' is to eject the card (requires a 'forced ejection"which I'm concerned could damage the card?), but the card ejects without delay.  90% of the time when I remove and reinsert the card, the operating system recognizes, all right.  (There are a dozen times when I had to reboot for it to be recognized.)

  All the others did this experiment with the Transcend (I submitted a request for tech support to them with a persistent response of 'Question Mac'... (LOL).  This error has been noted several times on the Forum discussion, but in the context of external drives and with no apparent solution.  FYI, I use the Transcend (in addition to external systems) b/c it works essentially like a hard drive internal and I use it mainly for Google Drive perfectly... except for the above inconveniences.  Thanks in advance!

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Error code: sec_error_ocsp_unauthorized_request

  I'm NOT going to be nice. Here's the description - I disabled the option "question responder OCSP servers to confirm the current validity of certificates. Has no effect. Still, I get this error:

  An error occurred during a connection to * removed * .com. The OCSP server refused this request as unauthorized. (Error code: sec_error_ocsp_unauthorized_request)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  You... don't even leave the website to load. Try again. Try again. Try again. Try again. Try again. Try again. The certificate of the site is very well as evidenced by SIX different sites of the verification of the SSL certificate. I can't add an exception because FF is unable to obtain the certificate.

  I tried to clear all - cache, cookies, history, blah blah blah

  I am so bored of you people cost me more time.

  It's fine in IE and Chrome.

  If I didn't need Firebug, I would switch to Chrome right now.

  edited because of the language according to the rules-forum-guidelines

  You're right, it is not sensible.

  Never made an exception for the site.

  FINALLY, what worked was rename the cert8.db file in the profile folder so FF could generate a new. Then FF grabbed the cert very well.

  Thank you for the help, sorry for the earlier rant.

• 4005 and 4013 error codes

  Air, 16G iPad. tried to install the latest iOS update. ultimately received 4005 and 4013 error codes. What do these codes mean and how can I fix the problem?

  Try troubleshooting on this page: If you see 9-4005, 4013, 4014 error when you restore your device iOS - Apple Support