HP 2050 J510a DESTJET. I can't install the software on windows 8

Similar Questions

• I can't install the update of Windows KB951847x86. Any help on this? Thank you.. .ragtopkid

  I can't install the update of Windows KB951847x86. Any help on this?     Thanks... tagtopkid

  ragtopkid,
  Take a look at this article as it addresses the issue.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• The product key label is worn and missing two numbers. How can I get back them so I can re - install the software?

  missing numbers

  The product key label is worn and missing two numbers. How can I get back them so I can re - install the software? The hard drive broke down.

  Thank you.

  How to identify, locate, and replace a product key
  http://support.Microsoft.com/kb/811224

• I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.

  I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.  Help had two suggestions being to check to see if the Background Intelligent Transfer Service is running, and I don't have the service installed, it is the problem.  What should I do?

  Hi Nita,

  Thanks for posting your question in the Microsoft Community forums.

  The description of the problem, I see that you are unable to install Windows Update and receive the error code 80246008. I also see that the PIECES is not in services.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  The 80246008 error code may occur if the (BITS) Background Intelligent Transfer Service is not started or is configured incorrectly.

  I suggest you try the procedure described in the article and see if it helps.

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.
  http://support.Microsoft.com/kb/956706

  Let us know the status of the issue after you perform the troubleshooting steps. If you need to get assistance or information about this problem with Windows Update, I'll be happy to help you. We, at tender Microsoft to excellence.

• CAN´t install the software for mouse Hyperion G402

  I can´t install the software, whenever I get the message: 'this software is not compatible with your operating system', I made sure I downlaoded the correct software for Windows 7, 64-bit. I called Logitech and I was told that it was a matter of Microsoft. Can someone help me please?

  It is not a Windows problem, but clearly something is wrong, don't know why the software is not installed for you well.

  I use software LGS on Win7 64 bit for years (G13, G710 + and a new all current G502 to run on)

  version 8.56.109 software atm).

  -Are you logged on as administrator?
  -You have downloaded LGS 8.56.109 or 8.57.145?

  -There is a firmware update for the G402 on the next page, which can help

  http://support.Logitech.com/en_US/downloads

  -You can also try to install in safe mode (press on and hold F8 - or I believe F2 on some motherboards - before Windows logo appears).

  clean boot or-

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  -I see that there are several threads on the forums of Logitech about your problem however.

  Assistance telephone logi is perhaps not as good as the forums.

  -If no suggestions on the existing threads can help you start your own.

  Maybe you've already been there, but--

  One of the suggestions on this thread is that Firefox will automatically download the 32 bit version.  But I use Firefox

  and no similar problems. If the file name ends with _x64 then you obviously do not have this problems either.

  .

• I can't install the update to windows. Windows Update, error 0 x 80073712

  Original title:

  I can't install the update to windows

  I tried just like the boot minimum scannow command and enter this command disk I found on the internet then also im anle not installing the update

  The main reason I want to install this update is because I want to upgrade my windows windows 8.1 8. When I try to update the store does not open the windows 8.1 update tile. Help, please

  Here's the error is for the installation of all these 3 updates

  

  Windows Update, error 0 x 80073712
  http://Windows.Microsoft.com/en-AU/Windows-8/Windows-Update-error-0x80073712

  If you receive Windows Update error 80073712 0 x or 80073712, it means that a file needed by Windows Update is corrupted or missing.

• I run on a Mac CS6.  I need to change the operating system and would like to know if I can still install the software

  I run on a Mac CS6.  I need to change the operating system and would like to know if I can still install the software.  I upgraded to OS X 7 (Lion) for OS X 10 (Coyote), but my devices would not work.  I'm changing to OS X 7 (Lion), but this will eliminate my entire hard drive.  My CS6 software install?  I bought CS5 and CS6 improved.  I don't want to go on the CCif I don't have to.  Thank you!!!

  as long as you have your serial numbers and installation cs6 files, you should be ok.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• If I sign up for LR and PS, can I install the software on my desktop and laptop computers?

  If I sign up for LR and PS, can I install the software on my desktop and laptop?

  Yes. You're not supposed to use at the same time.

  HAL

• How many computers can I install the software

  How many computers can I install the software?

  Hi Pteammats

  A serial number allows you to install a product on 2 machines!

• I can't install the drivers in Windows 8

  I installed Windows 8 Developer preview but I can't install the drivers, even in compatibility mode. They were fully compatible with Windows 7. It's really disturbing, because I can not connect to the Internet and to develop applications.

  Windows Developer Preview: OS General Questions:

  http://social.msdn.Microsoft.com/forums/en-us/windowsdeveloperpreviewgeneral/threads

  From the download page:

  The Developer Preview of Windows is a pre-beta version of Windows 8 for developers. These downloads include beta software that may change without notice. The software is provided as is, and bear you the risk of using it. It may not be stable, work properly or work the way that the final version of the software will be. It should not be used in a production environment.

  Given that Windows 8 has not been released yet not all drivers will work with him. Some drivers are very precise on the version of operating system, you may need to wait until the manufacturer releases Windows 8 drivers (if they make it to your model).

  If the compatibility mode option does not work, some drivers may be available by using Windows Update.

  Troubleshoot Compatibility
  This can help with some (but not all the) programs/drivers:
  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.
  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.
  (3) after he set up see if it works properly. Note: some programs are perhaps not able to run in Windows 8.

• I can't install the software for my printer of series e-all-in-one-hp deskjet 3070 on my mac.

  Hello

  I just bought an hp deskjet 3070 series e-all-in-one printer and it says that I'm unable to install the software for it because it requires 10.6 or below. Any suggestions on how to get this up and running?

  Thank you

  Tim

  Hi Tim,.

  The CD that came in the box is not intended for Lion mountain as the printer was made before the release of the OS.

  You can download the latest version of the software for your operating system below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-107189-2&cc=us&DLC=en&LC=en&OS=219&product=5068754&sw_lang=

  After completign the installation, be sure to restart and update the software by clicking the Apple icon, then software updated.

  Shlomi

• Can not install the software as another installation is already install

  When I try to install new software, my computer says that it is already install something, but I'm not.  How can I find what the computer is installed so that I can cancel it and install the software, I need?

  Hello

  1. what software are you trying to install?

  I would say you can do clean start and then install the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I suggest you follow the steps indicated by twinklingsky as dated April 20, 2010 from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/another-installation-is-already-in-progress-error/3e84cba0-a4cb-4307-9a67-b506ebb105b3

• Can I install the software on my MacBook Air, but also my Mac?

  I'm looking to get the CC with Lightroom. Can I put the software on my desktop computer Apple Mac as well as my portable Air?

  Yes.

• I can't install the software. Get the message "Setup cannot open the file c: / / Program Files/CommonFiles/MicrosoftShared/DAO/DAO2535.» TLB ' and also 'Cannot find Document Viewer' need help as soon as POSSIBLE. "

  Microsoft software is not software of accounting, I used for 10 years.  Also impossible to install the new program AVG Internet security. Similar messages.  Don't know if it's a Windows XP problem or a problem of Microsoft Office Small Business 2003.

  Hello befuddledXP,

  I can not be understanding you correctly. Is the configuration file, that you want to reach on a SBS 2003 Server? If Yes, then you must post in the SBS forums.
  It may be that the file exist no more in the way that you said.

  What is the error message you get when you try to install AVG?

  Do you get the "Cannot find Document Viewer" when trying to open a Word document?
  You can install a visualizer of document from the following Web site.
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=3657ce88-7cfa-457a-9aec-f4f827f20cac

  Please answer back with an update.

  Sincerely,