Can I install the software on my MacBook Air, but also my Mac?
I'm looking to get the CC with Lightroom. Can I put the software on my desktop computer Apple Mac as well as my portable Air?
Yes.
Tags: Adobe
Similar Questions
-
can not install the software for all in one photosmart 2610xi of disc of windows 7 pc
I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc. Goes so far then stops and says cannot use the command "run as". I am the administrator and logged as such. I would like to use the software provided with to send faxes and others. I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software. Any suggestions?
Thank you
Hello
The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
No matter which compatible OS are registered on the CD...A newer version of the software for Windows 7 can be downloaded from the HP site.
Before installing the software, be sure to follow the steps below:
- Enter the control panel > devices and printers.
- Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
- Disconnect the USB cable between the printer and restart your PC.
- Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=
Kind regards
Shlomi
-
missing numbers
The product key label is worn and missing two numbers. How can I get back them so I can re - install the software? The hard drive broke down.Thank you.How to identify, locate, and replace a product key
http://support.Microsoft.com/kb/811224 -
CAN´t install the software for mouse Hyperion G402
I can´t install the software, whenever I get the message: 'this software is not compatible with your operating system', I made sure I downlaoded the correct software for Windows 7, 64-bit. I called Logitech and I was told that it was a matter of Microsoft. Can someone help me please?
It is not a Windows problem, but clearly something is wrong, don't know why the software is not installed for you well.
I use software LGS on Win7 64 bit for years (G13, G710 + and a new all current G502 to run on)
version 8.56.109 software atm).
-Are you logged on as administrator?
-You have downloaded LGS 8.56.109 or 8.57.145?-There is a firmware update for the G402 on the next page, which can help
http://support.Logitech.com/en_US/downloads
-You can also try to install in safe mode (press on and hold F8 - or I believe F2 on some motherboards - before Windows logo appears).
clean boot or-
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
-I see that there are several threads on the forums of Logitech about your problem however.
Assistance telephone logi is perhaps not as good as the forums.
-If no suggestions on the existing threads can help you start your own.
Maybe you've already been there, but--
and no similar problems. If the file name ends with _x64 then you obviously do not have this problems either.
.
-
I run on a Mac CS6. I need to change the operating system and would like to know if I can still install the software. I upgraded to OS X 7 (Lion) for OS X 10 (Coyote), but my devices would not work. I'm changing to OS X 7 (Lion), but this will eliminate my entire hard drive. My CS6 software install? I bought CS5 and CS6 improved. I don't want to go on the CCif I don't have to. Thank you!!!
as long as you have your serial numbers and installation cs6 files, you should be ok.
Available downloadable Setup files:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7
- Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
- Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
window using the Lightroom 3 link to see these "important Instructions".
-
If I sign up for LR and PS, can I install the software on my desktop and laptop?
Yes. You're not supposed to use at the same time.
HAL
-
How many computers can I install the software
How many computers can I install the software?
Hi Pteammats
A serial number allows you to install a product on 2 machines!
-
How can I install my CS5 on my MacBook Air?
How can I install my CS5 on my MacBook Air? I have my serial number, but I can't find anywhere to download the program on the Adobe site. The physical CDs are useless w/MacBook Air.
Thank you!
Emily
The physical disks are OK with MacBook Air, if you buy an external DVD drive to low price and connect via the USB port. That's how I install the software of DVD on my MacBook Air.
That said, you can download the software from http://prodesigntools.com/adobe-cs5-direct-download-links.html
Very important instructions on this page first if the links don't work.
-
I can't install the software for my printer of series e-all-in-one-hp deskjet 3070 on my mac.
Hello
I just bought an hp deskjet 3070 series e-all-in-one printer and it says that I'm unable to install the software for it because it requires 10.6 or below. Any suggestions on how to get this up and running?
Thank you
Tim
Hi Tim,.
The CD that came in the box is not intended for Lion mountain as the printer was made before the release of the OS.
You can download the latest version of the software for your operating system below:
After completign the installation, be sure to restart and update the software by clicking the Apple icon, then software updated.
Shlomi
-
Can not install the software as another installation is already install
When I try to install new software, my computer says that it is already install something, but I'm not. How can I find what the computer is installed so that I can cancel it and install the software, I need?
Hello
1. what software are you trying to install?
I would say you can do clean start and then install the software.
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
I suggest you follow the steps indicated by twinklingsky as dated April 20, 2010 from the link below.
-
I can't use the CD, and I can't find it on the app store
PE 9 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-9-downloads.html
-
Microsoft software is not software of accounting, I used for 10 years. Also impossible to install the new program AVG Internet security. Similar messages. Don't know if it's a Windows XP problem or a problem of Microsoft Office Small Business 2003.
Hello befuddledXP,
I can not be understanding you correctly. Is the configuration file, that you want to reach on a SBS 2003 Server? If Yes, then you must post in the SBS forums.
It may be that the file exist no more in the way that you said.What is the error message you get when you try to install AVG?
Do you get the "Cannot find Document Viewer" when trying to open a Word document?
You can install a visualizer of document from the following Web site.
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=3657ce88-7cfa-457a-9aec-f4f827f20cacPlease answer back with an update.
Sincerely,
-
can we install the software required recovery disc.
I have a pavilion dv6 6140tx, with windows 7 ultimate.
I need help... can we install only selected or required software of HP recovery disks.
The following link will give you instructions and all the different options with recovery. You will probably need to use the Recovery Manager rather than the disks to install specific software, but the link will guide you.
-
How can I install Photoshop CS5 on my MacBook Air without the CD?
I bought a new laptop and now want to install my old Photoshop CS5 on my new. How can I do this, because I can't use my CD. I found a few links on the Web page, which apperently was not required, but then when I tried to install the media, there is no way round the media... Someone knows a solution? Would mean the world to me!
Thank you in advance!
CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
-
Can not install the software for my HP Photosmart Plus B209 on Windows 8.1
I could not install the driver/software package downloaded for my HP Photosmart Plus B209 Printer on my new HP laptop w/Windows 8.1. I get an error message that the following file is missing; \AppData\Local\Temp\7zS4D84\Setup\hpzshlaut4.0... I have 3 other computers of the OS windows 7 that I had no problem with the printer using this same download driver/software package. Any help you could offer would be greatly appreciated.
Hello
Follow the steps below and check if it solves the problem:1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
Now, try to reinstall the HP software and check if the installation goes as planned.
If the problem persists, continue following the steps below:
2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
7. run the installation file and check all difference.Kind regards
Shlomi
Maybe you are looking for
-
How can I change the base station Airport of NAT mode?
I'm trying to set up an Airport base station and stuck because I have the following message is displayed, but no idea how do what he asks... Status is showing as Double NAT and then asking me to move on to the base station in bridge DHCP/NAT mode. Bu
-
SD-C2502 reads only CD after reinstallation of the operating system on Tecra
Hi, I just had to reinstall windows XP, and now dvd - rom only reads CD. I have sought a pilot put this right but fails: someone at - it ideas?
-
9 brick iOS update my iPad Mini
I have an iPad Mini 1st generation 64 GB WiFi model, which is stuck in a boot loop. It worked very well with iOS 8.4.1 build 12: 321. I upgraded to iOS9.2 build 13 c 75, but many of my applications were not charged despite having used iTunes with a l
-
I have a gateway Windows XP with 2 RAM slots. Originally, there were two 256 mg RAM. To increase my RAM, gateway who sent Kingston 1 GB DDR2 memory live extra. In order to install my XP 32 bit to Windows 7 Professional 64 bit, I need 1 GB of additi
-
Cannot open the updates that have been downloaded.
I downloaded a file manager. I have to update to windows 8.1 but when I checked the updates, I downloaded it but it says the updates have been downloaded, but could not be opened (8018830f) kindly help me in this case and if you know a good manager w