HP 23xi monitor calibration

Similar Questions

• just bought HP Pavilion 23xi monitor, but not sound. It is based in the speaker?

  just bought HP Pavilion 23xi monitor, but not sound. It is based in the speaker? or any HP monitor built in speaker?

  Hello

  The following link shows its specifications:

  http://WWW8.HP.com/emea_africa/en/products/monitors/product-detail.html?OID=5328978#! tab features =

  No speaker. Please try the following Nice monitor:

  http://store.HP.com/webapp/WCS/stores/servlet/us/en/MDP/accessories-88342--1/HP-Pavilion-touch-monitors--1

  Kind regards.

• Color management in PS and monitor calibration

  I calibrated my colors of monitors with a colorimeter Eye One Display 2 and for photoshop, I attributed the monitors that he created the color profile to the work area (Edition > assign profile).
  But for photography I take pictures with the color profile setting AdobeRGB on my camera... should I use this instead of that color profile when working on photos in PS? They look a bit washed out. I guess I should continue to use my profile of monitors calibrated instead?
  
  And photos save a jpg for the web, should I check "ICC profile" box that lists my monitors color profile when registering? Because I noticed that now some browsers began to support ICC profiles. So in Firefox 4 BETA for example, if I do not use the ICC profile setting the colors look washed on other monitors.
  (Note that the ICC profile for jpg setting is available in file > save under... If I go to file > save for Web and devices there embed the color profile that is basically the same thing).

  I was confused in the same way and some time ago I asked a similar question here, but now I think I understand better and will try to explain. I'd appreciate also correction or a confirmation of those who understand this.

  Photoshop like all other color management programs, knows how the monitor displays colors of the color profile that is installed in the system.

  When you use an image with an embedded profile, Photoshop converts the properly display (not the actual numbers) of color values so that the planned colors are displayed as accurately as possible.

  The profiles selected for workstations in the color settings will be affected only in the following situations:

  • When you create a new image, given that it is not replaced in the new options window dialog
  • When in the color settings color management policies are set to perform the conversion of workspace - this will convert the actual number of color values
  • When you choose not to handle colors in the profile attribute in the Edit menu - this will change the display as if the image was created with the current working space profile, will not change the number of color values.

  If an image is with the same color in the system monitor profile then there is no color management past up to the conversion or Proofing color with a different profile.

  It is recommended to work in a popular as sRGB or AdobeRGB color space, because the color management wise when the images are intended to be affixed to the devices and various monitors and more common ground as sRGB is used as a reference instead of a particular monitor color space.

• monitor calibration system

  Can anyone recommend a good monitor calibration system (budget $300 limit)? I'll work on a book intended for offset printing press 4 colours, and the color is a major factor in the book. I'll never be, so I think it's time to take seriously the monitor calibration. I'm working on a new iMac, so I think that a good calibration system would be useful.

  Any thoughts? (Dumb question)

  Thanks in advance.

  Toni

  http://www.XRite.com/product_overview.aspx?ID=788&action=specifications

• HP Pavilion 23xi: Desk Mount double HP Pavilion 23xi monitors

  Hello
  
  Is someone can you please tell me if it is possible to mount two monitors of 23xi hp pavilion on a double rack mount monitor office.
  
  Look at the back of the screen, it does not appear that there are screws for the monitors to climb.
  
  I just wanted to get this information before I go ahead and buy a monitor to double desk stand.
  
  Any information on this would be greatly appreciated.

  Hello

  There can be NO standard mount (VESA). You need a drill and a good skill for drill holes on this subject. I think that you must buy monitors that supports VESA brackets or buy the following combinations:

  http://WWW8.HP.com/us/en/products/OAS/product-detail.html?OID=8525135

  (Note: check the hardware compatibility)

  HP Pavilion 22xw/cw, cw/23xw, 24xw/cw, cw/25xw, 27xw/cw).

  Kind regards.

• Pavilion 23xi: monitor the HP Pavilion 23xi - voltage?

  I had to remove my PC configuration for re - decorate the room, then as I put it all together again once I couldn't remember what power supply for the monitor and which is my external hard drive!

  They look the same but one is 19v and the other is 12V.

  Which is the right one for the monitor HP 23xi?

  Help!

  Thank you very much, this is very useful, is the part No.. on the adapter.

  Thank you.

• Problem of monitor calibration

  It's really more a matter of Dell, but I guess that I have a better chance of getting an answer here I have to do with Dell technical support.

  I used an X-Rite i1Display Pro to calibrate my screen XPS1645 laptop, my Dell U2713H and my Cintiq 21UX, using a D65 white point. I want to create a second profile for each display, using a D50 white point. However, the Dell UltraSharp (latest version 1.5.10, in advanced mode) calibration Solution no longer displays a white point with the U2713H option. With the XPS and the Cintiq, no problem, but with the U2713H, the software display settings show primary RGB and Luminance, but no White Point. X-Rite support could not explain it. (Thanks, X-Rite). They suggested that I ask the support of level 3 of Dell. I thought I'd try this first forum. A someone that has met and solved this problem?

  You do not have the monitor in a fixed point-to-point white preset, such as sRGB or Adobe RGB? They are the two D65.

  When you use a calibrator that the monitor must be in native mode, no emulation. It is usually the predefined 'custom' or something similar.

• (Redirected) I need assistance with my monitor calibration.

  the colors on my screen are disabled. In the calibration screen, everything seems fine but when I shoot pictures in photoshop that have a lot of white in them they look yellow. Photoshop also gives me this message.

  If I say to use, in any case the photo looks like this

  But if I said to ignore the profile, it seems.

  Any help with this would be greatly appreciated.

  Best of this post in the Forum of monitors, here:

  http://en.community.Dell.com/support-forums/peripherals/f/3529.aspx

  Bev.

• What temperature of monitor calibration depends on season?

  I just bought X-rite calibration kit, but one thing makes me curious. Should I set more point cold white (6500K) for the summer and warmer (5000K) for the winter?

  Climate warming will affect my current settings?

  There is no "correct" value for the white point - or rather, the correct value is that which gives you a Visual correspondence from the white screen of white paper. This applies to the luminance as well.

  First of all, you must have a working controlled - environment precisely to avoid the seasons or the time of day affect your perception. Windows are always a problem; protect them as much as you can.

  Get a Visual correspondence depends a lot of ambient light and the observing conditions. If strictly in the sense you are on the right idea (although it would be the other way around), but this can be addressed in a schematic way. It is much more subtle and require some trial and error.

  There are two ways to attack this. If you print yourself, this can be controlled very precisely by implementing a viewing print station, using light controlled, preferably right next to the screen. Then you calibration settings, visually, to match as closely as possible. The white point must not be 6500K or 5000K, it may be something between the two. It doesn't even have to be along the Kelvin scale, well, you had to adjust along the Green/magenta axis as well. Some white paper matches is the correct white point.

  If you work for offset printing, or other off-site, you have less control and need to be listening "medium" print conditions But the same principle applies: = white screen white paper. Even if you work exclusively for (web) screen, this will put you on the same page that people who calibrate similarly.

  Often overlooked, but equally important, is the beach of point black/contrast. Again, the print output is the key. A glossy photo of good quality paper can have a range of around 300: 1 contrast. Papers masts considerably less, perhaps 150:1 and offset print even lower. In practice, this means a blackhead around 0.3 - 0.5 cd/m². With i1Profiler you directly set contrast range.

  Monitor as manufacturers announce a high contrast, like 1000: 1 or greater. In reality, which means you're in for an unpleasant surprise when you see the final result on paper.

• ACR + monitor calibration

  Hello

  Recently I calibrated my monitor. I have little experience. Also with color management. Even though I know that there are...

  I doubt if I did well. It seems to me that the result is a little on the gray side (file: P1090340F.) (JPG).

  Is - this result (file: P1090340F.) (JPG) a good starting point to see how the final image will look like (Center of the photo)?

  I have the standard (small) JPG + RAW + JPG RAW XMP + calibration-screenshots of files placed on the following link: http://we.tl/JdTOFrwaLw (8 days from now available on WETRANSFER.COM!).

  Please advice.

  Assuming that you are in the Camera Raw forum because you shoot Raw files, the color in your camera profile is largely irrelevant. The RAW files do not have the standard color spaces. The camera color space setting is designed to in-camera processing, which produces the Preview on the monitor image back and (optionally) a JPEG image.

  [Some people shoot JPEG and treat the latter with Camera Raw too.] Their options are very limited in this way, due to the constraints of JPEG format and the fact that a large part of the image has already been scrapped (and cannot be retrieved).]

  The color space is defined at the time of the conversion, in camera, or on the computer. In the case of the cab, the settings of the workspace at the bottom of the plug-in window determine the target color space (not Photoshop).

  

  Photoshop workspace color space setting sets the default color for a new document space. If you have imported an AdobeRGB ACR conversion in Photoshop (with sRGB as the default Photoshop workspace), he would normally ask if you want to keep the AdobeRGB color space, or convert in the sRGB working color space. I mainly use Photoshop for photo editing, so my working space setting is AdobeRGB - the same that my setting Camera Raw to workspace.

  If I need images for the web, I use save for Web to create a sRGB conversion.

• Software/hardware to monitor calibration?

  Hello, all the...

  I asked this same question, essentially, a week ago, but got no response.

  Next week I'll be buying an Apple Thunderbolt Display Monitor. I have a hueyPro calibration device I've used on my MacBook Pro in the past with a bit of luck, but I'm looking for suggestions for hardware/software solutions to calibrate the new monitor for Photoshop work.

  I am specifically looking to the Spyder4Elite - someone has an experience with this device? And the software on a Mac? Looks like it will do what I want it to do, but I am curious about its use on the DAE.

  Any advice? Don't tell me I need another monitor - I need all ports which provides the ATD.

  Thank you

  Clinton

  The lack of response can be explained by the fact that probably not many people involved with critical color also work on your laptop, even a fancy like the MacBook Pro.

  You might want to try the color management forum:

  http://forums.Adobe.com/community/design_development/color_management?view=discussions

• The computer monitor calibration

  Hi all

  
  Since then, I am now seriously Pre Pro and AE, I think its time to overcome the uncertainty about how to calibrate.   The only thing I have to judge the color of my work is my computer screens and television when I burn a DVD.

  So I am looking for any advice during calibration.  I use an Apple monitor and an old HP 72 monitor to my second screen.

  When show controls in system preferences, I was wondering does choose any particular resolution made for a display better or more accurate video on the monitor.

  My Systerm preferences color screen has 5 display profiles including the one I created with the calibration Assistant: (1) Cinema HD (which I created after you have used the wizard of Cailibrator);    (2) adobe RGB (1998).   (3) generic RGB profile;   (4) D8904CN21 HP (my second monitor); and (5) sRGB IEC61966 - 2.1

  Which one should I use?

  Thank you

  For video work, always leave the default sRGB. Everything else would be just tilt the color any more away. Yet, without a proper calibration device, which is going to be perfect, either. You screen brightness could be a basket case, could have set the color in 1 million other places on the monitor or the graphics card and so on... It really comes down to measure on your screens and create a color profile for them. So, if you are really interested, at least borrow a Spyder, EyeOne, Colormunki or similar to see, once how your screens should actually look like, when they are 'neutral '.

  Mylenium

• Monitor calibration - recommended settings?

  Hello.
  
  I have a Lacie320 monitor and I calibrate with a Display 2 EyeOne. My question is about the parameters. I have currently calibrated so the gamma is 2.2, the color temperature is 6500 k, and the luminance is 120. It is an ideal place? I often don't print my work, and it's especially on the web. I work in a very dark room, with little or no ambient light shining on the monitor. My luminance should be less?
  
  If someone could tell me if what I'm doing is right or not, it would be great. I'm always up when I see my pictures on another computer and they are completely different.
  
  Thank you!
  

  Jeremy,

  Some people seem happy with their monitor to print match using the settings that you have posted.  I never could get a good match with these settings.  My impressions ALWAYS looked too yellow and too dark (in fact, the monitor is too blue and too bright, so while editing, you blow up the yellow and turn down the brightness, which is what appears in your print... too dark and yellow).

  You can create two separate calibrations, one for the web and for print.  My main concern is to print results, so I calibrate my monitor to 5200 K, 2.2 g, 90 cd/m2.  Seems pretty close to perfection for my setup. I would recommend anywhere between 5000K and 5500 K color and 85 to 100 cd/m2 for the luminance.  I leave my monitor has put out there, even for my work based on the web, knowing that others can see my images brighter and cooler.  I don't worry about internet as monitors of the peoples are anyway in all directions.

  On a Mac, you can change the profiles to monitor any time you want, without any additional software.

  If you're on a PC, download (free) DisplayProfile.exe the site of XRite.  It allows you to load different profiles in your map video on the fly.  It requires the proper profile, but ProfileMaker tags both EyeOne Display (Eye One Match) have these tags.  They have a complementary, also free, program called Tester calibration, which shows the curves of writing to the video card, but this is not necessary unless you are curious and just want to play.

  http://www.XRite.com/product_overview.aspx?action=support&ID=757

  Open the "Software Downloads" Group on the page above and you will see the two programs.  Runs like a champ.

• Pavilion 23xi: turn off the power of the icon of the Pavilion 23xi monitor

  A small but annoying problem. Computer start-up that a small monitor icon appears in the upper right, sometimes at least covers the button. I can get rid of it by pressing the exit button, but next time think I start computer it is back. He follows me around the screen especially when writing emails.

  I'm sure it's easy to remove, but I passed the age by train, a lot of time looking at this site for the last questions, without success. There is an icon of the monitor on the taskbar to the top is totally useless.

  Hello @KN5530,

  Thanks for the quick response!

  From the information you provided, you can consider contacting the Support technique Dell to solve your problem.

  I hope this helps.

  Kind regards!

• Why did I fail discover "All scopes" in monitor calibration?

  There is no 'all scopes""Vector field""Waveform YC"or parades in my reference monitor setting. What happened to my first pro?

  They are now under Lumetri in the view menu.