HP 240 g3: brightness control viz F2 and F3 does not

Similar Questions

• I tried to install GamingSDK1.4 and it does not open. then I went to control panel under windows uninstall 8 and its still on Creative cloud and I can't reinstall it

  Yesterday I installed GamingSDK1.4 and it does not open after completion. I've walked by an officer of Adobe to uninstall, I did. Returned and he was always there, but instead of saying open next to him, he says "up to date" I can't uninstall it. I want to reinstall it to use.

  http://helpx.Adobe.com/creative-cloud/KB/AAM-lists-removed-apps-date.html

• Alarm and timer does not iOS 6 s 10

  Help! After having downloaded the iOS 10, my alarms and timer does not work. During the years that I have had 4 different alarms set - 2 in the morning and 2 the afternoon. This morning the alarm at the top of my phone icon was there, so I assumed that everything was settled as it is normally. I was wrong. My 05:30 alarm has not extinguished the next morning. The next day, I could turn it back on, but when I went to all other lights it shuts down another. It would only be standing. So, I opted for the alarm from 05:30 again. With my phone not allowing an alarm to be defined at the time, now I'm going to put it but it randomly turns off its own. I'm FED UP with it! I used my phone as alarm clock years but had to go out and by a real wake-up call to make sure I wake up in the morning. Not only that, but my timer does not work either. What is someone is having these problems?

  I did have the problem where one turn the other goes out, but since I got my iPhone with iOS 10 7 or my alarm not timers turn off. I watched the ticks to zero with no sound, no matter what I do. There is no problem with volume control and I did it with the key "secret" on and outside. I am at a total loss.

• Error one of the UBS damage connected to this computer has malfunctioned and windows does not recognize it

  Original title: Canon MF 4500 printer inkjet

  My computer tells me that 'one of UBS damage connected to this computer has malfunctioned and windows does not recognize"it could the cable, as the printer (canon MF 4500) does not work.

  Hello

  1. what operating system is installed on your computer?

  2. when exactly you receive this error?

  3. all USB devices work properly on your computer?

  4. have you made changes on the computer before this problem?

  Method 1:

  You can try running the fix - it from the following link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  You can try to uninstall and reinstall the USB controller. Follow the steps.

  (a) click Start and then click Control Panel.

  (b) click System and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (d) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows will automatically reinstall all USB controllers.

  It will be useful.

• HP officejet 4630: copy and scanning does not

  Since the upgrade to Windows 10 HP 4630 Oficejet stopped working for copying and scanning options.  Print and fax options are OK.  Have updated to the latest version of the software (many times) without success.   Also checked the scan of the computer is turned on.  When you use HP Print and Scan verification pilot doctor fails (unable to communicate with the product). Follow the suggestion without any positive result.

  Have tried everything that I could find on the internet to solve the problem without success.  Any ideas what else can be done or

  the driver for scanning and copying does not work with Windows 10 in all?

  Even if I try to use the only printer with Dell computer off, still can not copy or scan a document.

  Hello! Welcome to the HP community @Stewball1313,

  I read your post about how you are unable to make copies or your Officejet 4630 analyses, and I wanted to respond with my own suggestions. As you can not copy, it is a sign of a hardware problem as copies do not involve the computer somehow. I think the question can be a failure of scan of your description, as for you to open the link I posted below and try a reset and checking the connection of power supply and then try to make a copy again. If copies are still not, I would then contact HP directly to see about a printer replacement or trade for a new unit. If you encounter other problems, let me know and I'll do my best to help you!

  (Note: the Officejet 4630 is compatible with Windows 10 and it has full functionality of drivers available for the operating system.) However, if the problem is a hardware failure, a driver will fix a hardware problem).

  All products - in - One HP - a 'Failure of the Scanner' Message displays on the all-in-one control panel and you cannot scan, copy or Fax

  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

• Startup and display does not work well.

  When I start Windows XP it takes about 4 minutes to the icons appears.  They appear of normal size and the screen turns white and the size of the icons and programs and the internet are extra-large. I go into display properties and reconfigure and find his game on 8-bit!  After configuration back to normal display and restart or turn on again the same thing happens!

  Also, I tried to do a system restore and it does not work either. Please advise me on what to do. Thank you!

  Hi RhondaHeaven,

  I suspect that your display card drivers are corrupted. You have your cd/dvd drivers? If this is not the case, download your display drivers (you will get the model and make from Device Manager - click on start-> settings-> Control Panel-> system-> hardware-> device-> display adapter Manager).

  Click Start-> settings-> Control Panel-> system-> hardware-> Device Manager-> right click on your display-> Uninstall adapter.

  Uninstall display drivers Intel of add/remove programs.

  Restart your computer. Reinstall the drivers from the cd or downloaded driver.

  I hope this helps.

• my windows xp is upside down. I tried Ctrl + Alt arrow and it does not work

  my windows xp screen is upside down.  I tried Ctrl + Alt + arrows and it does not work.

  Hi milton the monster.

  Check in Control Panel to see if you have a NVidia Control Panel or ATI Control Center icon. You have will depend on which video card to install on your PC. Click the NVidia or ATI and open Center Control Panel. Look carefully at the options and you should see an option for "rotate screen". Click on it and press the appropriate option to rotate the screen in an upright position.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Why my windows freeze and go does not respond when I try to install the msn photo on hotmail download tool?

  Why my windows freeze and go does not respond when I try to install the msn photo on hotmail download tool?

  The active x bar descends into the small window and freezes all windows open right there and will not respond. This happens when I open a new message and try to attach photos.

  Things I tried but has not made a difference:

  reinstalled IE 8, deleted the history of the browser, disk Cleanup, removed msn photo upload control, optimized IE8

  With xp media center

  PS. This occurs also at any time the information down to install an active x on any site control

  The only way to surf now with frustration is to use IE 8 NOT add optional

  So I fixed that on my own and that's how I did it.

  You must uninstall IE 8 completely which will bring you to IE 7 (in my case) and then install IE 8 via the site updates or microsoft.

  Uninstallin IE 8 by going to:

  Start--->

  Control Panel--->

  Add Remove programs--->

  Scroll down to IE 8--->

  Click on delete.

  IE8 updates must be removed also, if not then click the box 'To see the updates' on the top of the window to scroll down, look for the IE 8 security updates and delete.

  Resart your computer and install IE 8.

  This worked for me and may or may not work for you.

• Computer is very slow and IE does not work all the time.

  I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

  Hello

  Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
  the former employer to do it for you if necessary.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• "Problem reports and Solutions" does not

  After scoring in my Windows Vista machine, I am bombarded with notifications "Problem reports and solution" does not. I tried to disable the service, but I still get notifications. I can't find PRS in the control panel. In the event viewer, I found the following:

  Error
  Log name: Application
  Source: Application error
  Event ID: 1000

  WerCon.exe application, version 6.0.6002.18005, time stamp 0x49e026db, module wercplsupport.dll, version 6.0.6000.16386, time stamp 0x4549d345, exception code 0xc000001d, offset error 0x000000000000ce84, 0xda0, failing application start 0x01cd140e4c7b7770 process id failed.

  I can't confirm or deny that usrename of the local administrator account has been changed. It is quite possible. I know that usernames on the pc have been changed to instead of creating new user accounts. I just can't confirm if one of these accounts was a local administrator.

  Any help would be greatly appreciated. It is a major pain in the back.

  SG

  Hello

  1. Your computer is connected to a domain?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you to see link below and check if it helps.

  Windows Error Reporting and reports on problems and Solutions feature in Windows Vista: http://technet.microsoft.com/en-us/library/cc709644(v=ws.10).aspx

  Hope this information is useful.

• I accidentally change the main drive d LABEL: volume 1 label D: (C :) AND IT does not FIND C:\Windows\system32\rstui.exe. How can I find this path?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages - Windows cannot find C:\Windows\system32\rstui.exe «»
  • Recent changes made to your computer: I accidentally change the main drive d LABEL: volume 1 label D: (C :) AND IT does not FIND C:\Windows\system32\rstui.exe. How can I find this path?
  • What you have already tried to fix a volume control simple back - I tried things like this before as to cause major problems. I'll do it right the first time.

  Read this tutorial carefully. Hpoefully it resolve issue you. I have no knowledge on this topic. Only offer you a tutorial of a VERY worthy site.

  How to add, change, or remove a drive letter in Vista

  http://www.Vistax64.com/tutorials/114767-drive-letter-add-change-remove.html

  t-4-2

  PS Sorry for the huge impression. A small bug in copy/paste.

• Error: One of the USB devices attached to this system has malfunctioned, and windows does not recognize it.

  tried already everything written here. When I plug my USB device (3 of them) my Windows a sad of the USB devices attached to this system has malfunctioned, and windows does not recognize it. I tried plugging it into another winXP machine, it won't work. Can you help me?

  Original title: usb malfunction

  His salvation,

  Thanks for posting your query in Microsoft Community Forum.

  1. What are the troubleshooting steps you have tried so far?
  2. If it works much earlier? If so, did you do changes on the computer before this problem?
  3. What type of USB device you are using?

  As you mentioned that the USB device does not work when plugged into a WinXP machine, it may be a problem with the device itself. In addition, the question may also arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows.

  Therefore, I suggest you try the following methods (skip the ones that you already tried) and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  If the device fails after updating the driver, you can try to roll back the driver with its previous version.

  Restore a driver with its previous version

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• How to fix error 0 x 81000031. I tried recommended default restore libraries and it does not work.

  I'm unable to use the backup feature in Windows 7.  I get the error message 0 x 81000031.  Have you tried the recommended solution and it does not work.

  Hi married,

  Thanks for joining us out on Microsoft Community Forums.

  From your post, it seems that you have found an error 0 x 81000031 when you try to perform a backup.

  1. When you say "Feature backup in Windows 7" are you referring to the utility of Windows backup program? If so, you can follow the instructions below.

  2. you save data on a CD/DVD, external hard drive or a network drive?

  When you save the data to an external hard drive, have you tried "scenario 2: BitLocker Drive encryption is activated'? '"

  If the problem still persists, try the following:

  Disable UAC (User Account Control) and check if you backup works very well.

  See: How can I change the behavior of user account control by using the slider?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

  It will be useful.

  Come back if you have any questions about this question or any problem related to Windows and we will be happy to help you.

• now, I'm using windows 7 Home Basic but in my google chrome and firefox does not please give me suggestion?

  now, I'm using windows 7 Home Basic but in my google chrome and firefox does not please give me suggestion?

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• I set up the familysafety.live and it does not block anything.

  I set up the familysafety.live and it does not block anything.  Help

  Hello

  Were there any changes made on the computer before the show?

  I suggest you to refer to the article and see if it helps:

  Protect your kids with parental controls

  http://Windows.Microsoft.com/VI-VN/Windows7/protecting-your-kids-with-family-safety

  Check out the links for more information:

  What can I control with Parental controls?

  http://Windows.Microsoft.com/VI-VN/Windows7/what-can-I-control-with-parental-controls

  Video: Use Parental controls

  http://Windows.Microsoft.com/VI-VN/Windows7/help/videos/using-parental-controls