Startup and display does not work well.

Similar Questions

• Fingerprinting and display does not work after the recovery of the system (Pavilion dv7 4080us)

  Hello.

  This weekend I decided to do a restore of the system on my Pavilion dv7 4080us (LW170UAR), as I have done several times previously, using the built-in HP and the recovery etc. partition manager.

  Operating system is Windows 7 Home Premium 64-bit, and everything worked OK with the new facility, with the exception of two things:

  • I don't see my AMD display driver listed on device listing Manager. Only 'Intel HD Graphics Family' is listed under graphics cards. I tried to download the drivers from the support page, but it doesn't help.
  • The fingerprint reader does not work. I tried to uninstall the drivers and software several times, rebooting and everything else I've seen that suggestions on these forums, with the files found on the support page of my laptop. No luck yet.

  I would appreciate any kind of help. Thank you!

  Excellent!  I am happy that you now have the correct drivers installed.

• I rebooted my acrobat adobe 9 on my new computer and it does not work well, I can't make changes in Res.

  I can't make it work

  Hi tygolden,

  It seems that you are not on the compatible operating system. Please take help here

  Adobe Acrobat required configuration

  It is an old version and not supported in Acrobat.

  Concerning

  Meenakshi Negi

• Logitech Internet Pro mouse does not work well.

  I have a Logitech Internet Pro muse and his does not work well since last month. Maybe I should clean a tell me please to open this optical mouse to clean or may be a virus is there or Spring does not work. The model information is on the http://reviews.cnet.com/keyboards/logitech-internet-pro-desktop/1707-3134_7-31228942.html link. I don't him is not connected with a USB port THANK U. PLEASE HELP ME!

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Method 1: Yes, you can open the mouse and clean it to remove any dirt inside.

  Method 2: you can download and install the drivers for the mouse on the manufacturer's Web site and see if the problem is resolved.

  Hope this information helps.

• problem with NFS MOST WANTED... car does not work well

  Hey... I installed NFS MOST wanted on my laptop a long time ago... and 2 days ago it was working properly, but now during acceleration cars, its noise is too loud, and it does not work well or normal...

  Nobody understand my problem... plz suggest me...

  Try a system restore to when it worked:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Check the reliability monitor to see what changed between where he worked and where you have noticed the problem:
  http://Windows.Microsoft.com/en-us/Windows7/how-to-use-reliability-monitor

  In particular, if there is no driver updates, try to back off:
  http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version

• my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.

• P850 satellite and a WiFi - internet connection does not work well

  Hello

  My internet connection does not work with a Wi - Fi connection.
  I have laptop Satellite P850-131, which I bought a few months ago and I noticed that over the past two months the internet connection does not work well. When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  I tried to do all the regular search but nothing works. Sometimes the message I get told that there is a problem with the DNS and other times with the IP address. However, with other computers I didn't have any problem at all to connect to the same Wi-Fis.

  All solutions?

  > When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  If such a problem would appear again start the console (window BACK in typing CMS in search)
  Here, use the command * ipconfig / renew *.

• Hello! I restored my iPhone 5 because IOS 9.2 does not work well, and now the IPhone does not recognize the SIM CARD ☹️ please someone help me! What can I do?

  Hello!! Recently, I have restored my iPhone 5 because IOS 9.2 does not work well. But now my iPhone does not recognize the SIM CARD.

  I Don' t know what to do, help me please

  You get an error message?

  What did he say?

• Computer is very slow and IE does not work all the time.

  I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

  Hello

  Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
  the former employer to do it for you if necessary.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• If I pay for an application and it does not work I would get my money back guarantee, please, thank you

  If I pay for an application and it does not work I would get my money back guarantee, please, thank you

  This is a user to user forum. You don't talk to Apple.

  You can report a problem with applications to http://reportaproblem.apple.com and request a refund as well.

• pages started freezing, force to quit and restart does not work

  Try to do the homework, no good with computers. I used screen split pages with safari, then I'll click to pages and the cursor does not blink, and I can ty click on something, but nothing helped. I even try to click in Safari and who does not work either. I have to then press the task or what you call it, force quit applications, then restart. It started just randomly and really annoying, see I need to deal with all my classes AP. Pages for this when alone as well.

  Hello ElliottRadovan,

  I understand that the Pages and Safari sometimes appear to hang when switching between the two. Fortunately we have some articles that detail how to identify and correct the source of the problem, restore stability to your Mac.

  Isolate problems on Mac OS X
  https://support.Apple.com/en-us/HT203161

  Mac OS X: how to solve a software problem
  https://support.Apple.com/en-us/HT201516

  See you soon!

• Satellite M30-113 does not work well when I use FreeBSD 6.2

  Hello

  My M30-113 does not work well when I use FreeBSD 6, 2-RELEASE http://www.FreeBSD.Org/

  I was told that Toshiba has release a new bios to correct the problem of cooling, because it does not allow me to fan passive cooling in FreeBSD.

  So could we have a new bios to solve this issue?

  Arabian salvation

  I am sure that mobile industry is focused on Windows operating system and hardware architecture together and preinstalled software are adapted and also configured to run well and stable.

  This operating system is supported and if something should be better portable manufacturers offer different updates to the BIOS. Of course, you can preinstall what you want but you can not expect support for everything you can find on the market and because of this I n t believe that you won't find any update especially for FreeBSD 6.2 - RELEASE BIOS.

• My touchpad does not work well on Satellite C55-A-1ND

  For several days my touchpad does not work well. It has nothing to do with the power touchpad button on the F5 key.

  The touchpad is most time does not and something a bit but I can't use the touchpad at all now.

  When I attach my external mouse on my laptop I can use my laptop otherwise I can't use my laptop.
  I already rebooted my laptop several times, but it helps not at all.

  I hope someone can help me!

  You said that this issue has nothing to do with the touchpad on/off function s.
  So what's exactly wrong with the touchpad? Is he disabled or enabled?

  Have you checked the settings in the control panel-> mouse-> last (device settings) tab-> settings button?

  Have you already tried to reinstall the software/driver for touchpad?
  If this is not the case, do.

  By the way: what model of laptop and what system you have?

• On the Satellite P500 microphone does not work well

  I spent $2,000 to buy this Satellite P500 a month ago and soon found that the microphone does not work well. I used the web camera application to record a video to test, the volume level is very low that you barely hear it and it cracks.

  I called the support center, waited for half an hour and finally had someone to talk to me, I followed his instructions adjusted the level of the microphone to 100 and the boost to 0.
  The cracking sound disappeared, but the level of volume is still too low to hear. What can I do?
  Call again and wait half an hour? His Friday 17:00, they will be upset and I'm already mad!

  Hello

  Have you tried to test mic with Skype or a similar application. Friend of mine has Satellite P500-127 and he use it for Skype communication.
  I can hear it fine and everything works fine.

  Do you still have the factory settings (original operating system preinstalled)?

• My screen touch iphone 5 does not work well when charging. Please someone help me

  Members of the apple, Hello

  When I'm using my iphone and he is in charge the touchscreen does not work well

  Why apple made this feature on ios?

  Try

  http://support.Apple.com/en-us/HT201559