HP 250 g1: Question about max ram mhz to hp 250 g1?

Similar Questions

• Question about upgrading RAM on Satellite U400-138

  Hello

  My laptop model is Satellite U400-138, part number: PSU44E-00500JG3

  Technology:
  type: technology Intel Centrino 2 processor on processor Intel Core 2 Duo P8400, Intel GM45 Express chipset and Intel WiFi Link 5100
  Clock speed: 2.26 GHz
  Front Side Bus: 1066 MHz
  level 2: 3 MB cache

  Operating system:
  Genuine Windows Vista Edition Home Premium (pre-installed, Toshiba-HDD recovery)

  System memory:
  standard: 3 072 (2 048 + 1 024) MB
  maximum extension: 8 192 MB
  technology: DDR2 RAM (800 MHz)

  In intel webside one writes the following on my motherboard laptop specifications:

  "1.2 Intel GM45 Express Chipset supported feature
  All features supported by the Intel PM45 Express Chipset supported by Intel GM45
  Express Chipset unless otherwise stated below. Additional features are listed below. "

  1.2.2 memory system «»
  -Support to 667 MHz DDR3 then FSB 667 MHz isn't that. "

  "1.1 Intel PM45 Express Chipset supported feature
  1.1.2 storage system
  -Support for DDR2 and DDR3 SDRAM
  -Support for DDR2 667 MHz and 800 MHz
  -667, 800, and 1066 MHz DDR3 support
  -One SO-DIMM connector (or memory) per channel
  -Channel memory supported two Configurations
  -Double-channel symmetrical (with Interleaved access)
  -Dual-channel asymmetrical (with or without Intel Flex memory technology)
  -Support for 8 GB of maximum memory
  -scale 64 - bit per channel
  -Technologies of 256 MB, 512 MB, 1 GB and 2 GB memory supported
  -Support for DDR2 and DDR3, x 8 and x 16 devices
  -Support for DDR2/DDR3 termination on chip (ODT)
  -Supported partial written memory using data signals mask (DM)
  -No support for chip quick selection mode
  -No support for ECC
  -No support for operation 1N. "

  http://www.Intel.com/assets/PDF/datasheet/320122.PDF

  The question is...

  I want to upgrade my portable computer system memory 3 GB DDR2 (800 MHz) RAM to 4 GB of RAM DDR3 (1066 MHz), which is compatible or not?

  Respect,
  enteoana

  Hello

  In my opinion, you should follow specification not Intel and Toshiba. S Toshiba of info is based on own tests and facts.
  So, depending on the specifications of Toshiba for the GM45 Chipset it is clearly written:

  Min(on Board) wheel capacity - DDR2 800 MHz 0 MB / 8 GB max
  Type of extension of memory - DDR2 800 MHz 1 GB/2 GB/4 GB
  Type of module - SO-DIMM

  So if Toshiba write about 800 MHz modules, you must use the modules to them and not faster.
  You may be able to use faster too, but they do not work with the maximum speed, but not going down to 800 MHz.

  If you want to use max RAM amount use recommended and tested 2 x 2 Go DDR2-800 (PA3669U-1M2G).
  Indicated as compatible RAM, 4 GB DDR2-800 (PA3670U-1M4G).

• Question about upgrading RAM on Satellite P100-423

  Hello

  can someone reassure me I'll buy the correct RAM and the best for my 2 Satellites. One is the P100-423.
  The other is Satellite Pro P100.

  (1) can I use modules of PC2 5300 DDR2 SO-DIMM 200 pin - 667 Mhz on both computers.
  I want to buy chips to 4 x 1 GB (all the same), so both will have 2 Gig ram PC.

  (2) I saw the bullets above with 533 Mhz, but told me I can use or 667 Mhz. Is this correct?
  667 Mhz would be faster and better is not it?

  (3) some chips are also designated PC2 - 4200 - instead of PC2-5300. Again, I can use either?

  (4) Finally, I always thought that it was better for if adapt to 2 memory chips to live the same size - that is why I want to use 2 x 1 GB chips.
  Yet, I was recommended to mount 1 x 1 and 1 x 2 GB in each pc.
  I know that IE a total of 4 GB is theoretical only 3.25 GB is possible.
  But asymmetric training will offer much greater performance on balance training 2 x 1 GB. ?

  Thank you very much for all the advice offered

  Robert

  With the help of RAM slower is possible. I have another laptop to work with the iso 4200 5300. It works ok.

  However, using the exact speed is better because it gives the best performance. Your system calendar is set on those memories.

  However slower modules, but more RAM still will give you better performance.

  3G seems to be the max for Vista-32. The imbalance is obviously not optimal, but I expect that the performance is better with 2 GB.

• Satellite Pro 4600: Question about upgrade RAM, CPU, motherboard

  Hello

  I have a SP4600 and because I love this machine, I want to give him the chance to stay with me - but unfortunately, it will only work by increasing its performance...

  Is anyone here has made some experiences in upgrading a SP4600 more than 512 MB of RAM?
  I know that this machine uses PC100 SD - RAM that is available up to 256 MB.
  But someone has tried successfully to put in PC133 memory? And if so, to were the limit?

  And more: what about the upgrade of the rest, for example, the CPU or the whole motherboard?
  Currently, his heart beats with 700 Mhz (Celeron). Would it be as easy as just another graft?
  Or would it be easier to exchange the whole motherboard?
  I've never done anything like this before and I'm not sure how the rest of the system can react on these interventions, in particular because the we-board-video and sound on board...

  I would be delighted if someone could give me some positive feedback on these issues...

  Hello

  You can only use the memory 100 Mhz modules because the FSB is limited to 100 MHz.
  If you use 133 Mhz modules, they will work only at 100 Mhz.

  You can upgrade the satellite Pro 4600 until 512 MB (2x256MB)
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=28447&ft=m&St=3

  Other devices such as the CPU or GPU are not extensible and the motherboard may be replaced only with the same motherboard

  Finally, you should know that the laptop technology is a little different and you can't compare it with any desktop computer. You can update some parts such as the memory or HARD drive, but that s all the

• Question about upgrading Ram on a Satellite Pro A200

  I want to buy an internal memory of my A200 Satellite Pro Mod no, PSAE1E, but I can't find my model in the drop-down lists, what memory do I need, I want to switch using two sticks of 1 GB memory, at the present time, I have two sticks of 512 MB installed.

  Hello

  Compatible modules are: * DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM *.

  As far as I know all the A200 series laptops can evolve until * 2 GB *.

  This means that a memory would support module of RAM 1 GB max.

  As the previous user have already said, the Kingston modules are not bad.

  I also use it in my book and so far, the modules are ok.

  See you soon

• Questions about upgrading RAM on Satego X 200-21 L

  Ok. i've got the Satego X 200-21 L (as the Satellite X 205 except the screen resolution) and I want to upgrade my memory to work up to 3 or 4 GB.

  1 What is more profitable? An increase of 4 GB or 3 GB? I need it because Vista makes my Latptop very slowly sometimes, and for games.
  I've heard Vista only detect / 3 GB (I have a 32 Bit system) - is this true?

  2. where could I install and build in this helping hand storage work? What I have to go to a toshiba - authorized reseller or I could do in the next electronic market close to home?

  3 should I know something important about him - as a guarantee - it could run out if I increase my working memory?

  THANK YOU SO MUCH FOR YOUR ANSWERS!

  Hello

  You can upgrade your laptop up to 4 GB of RAM. The compatible RAM 2 GB module has PA3513U-1M2G part number. I heard that the problem in recognizing/3 GB should only be solved with SP1.

  Upgrade of RAM do not negate the warranty valid. It is also described in the manuals page 123 s user document. Check it out.

• Question about upgrading RAM for a Satellite A110-133

  The following ram would work on the laptop mentioned above?

  Kingston KVR533D2S4 / 2 G 2048 mb so-dimm, 200 pin

  Thank you.
  Any input would be appreciated

  Hello

  This page might be useful for you:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=24868&ft=m&St=3

  You need DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM barrettes.

  But I doubt that the Kingston KVR533D2S4 / 2G 2048 mb would be fine because the A110 can be upgraded up to 2 GB, and in this case, you can only use 2 x 1 GB RAM modules

• Question about upgrading RAM in Equium P200

  Are there disadvantages to the insertion of a 2 GB module (one of the 2 slots left empty) instead of insert two modules of 1 GB (so using the two slots).
  Also, can I insert two modules of 2 GB 4 GB total to give me?
  I have an express chipset Intel (r) 945. If I can, I should update the bios?

  Thank you in anticipation of an answer.

  Hello

  aren´t there are disadvantages - just install 1 x 2 GB module, if you hesitate. Alternatively, you can install 4 GB of RAM, but you won´t be able to use all of the 4 GB due to a limitation of the operating system.

  To learn more about the limitation of 4 GB, see this post:
  http://Channel9.msdn.com/ShowPost.aspx?PageIndex=1&PostID=42545

  Welcome them

• Tecra M3 - questions about the RAM maximum and graphics driver update

  Hi people,

  I have a Tecra M3 (Variant FBCF with the Geforce 6600 w / 128 MB) and I have two questions that I hope someone here can help me with:

  (1) what is the maximum amount of RAM that I can install here? The manual says 2 GB (2 x 1 GB), but I do not see why the laptop would be paralyzed this necessary way, cause as far as I know the 915G chipset can handle 4 GB of RAM. If anyone knows definitively what?

  (2) the latest drivers from nvidia for XP are 2005. As most of you probably know, nvidia systematically more than past performance with versions driver and adds compatibility with some games that end up in trouble. The real driver from the nvidia site does not install because it says that it cannot find any compatible hardware. Can't Toshiba even a pilot updated annually? There is a driver of 2007 for Vista, I can't believe that if they did, they decide refresh the XP one while they were to him. Any chance of their audience on this here? I could force the nvidia.com driver to install, but I don't think that it's necessarily a great idea.

  Thank you!

  Hello

  the maximum amount specified for this machine memory is 2 GB and 4 GB not but you can try it with 2x2gb modules.

  With regard to your graphics: Don t use the nvidia driver since it is not suitable for mobile graphics chipsets and has no timing in the driver that is needed to run flawlessly.

  I'd rather you to view laptopvideo2go and download some drivers here. :)

  Welcome them

• Satellite P100-188: Question about upgrade Ram and CPU

  HELO everyone,
  I need a major update so I wanted to know if it is possible to upgrade the processor. I'm already playing Doom 3 ulra high with 4 X Ati and 1024 X 768.
  He sent me some 46 frames per second, with 2 GB ddr 533.

  Then I put the Satellite P100 - 188 T2400 T2500 or T2600 CPU and can I use ddr2 667 mhz Ram?

  Any suggestions how much performance increase if you upgrade hard drive 5400 RPM to 7200 RPM with 8 MB of cache?

  Thank you

  Hello

  The CPU cannot be replaced. But you can expand the memory with the modules:
  PA3499U - 1 M 25 (Kit of memory 256 Mo DDR2-667)
  PA3511U - 1 M 51 (Kit of memory 512 MB DDR2-667)
  PA3512U-1M1G(DDR2-667 1GB Memory Kit)
  PA3513U-1M2G(DDR2-667 2GB Memory Kit)

  DDR2-533 256 MB (PA3389U - 2M 25)
  512 MB DDR2-533 PA3412U - 2 M (51)
  1 GB OF DDR2-533 (PA3411U-2M1G)

  The maximum memory that you can use this camera is 4 GB.

  Good bye

• Re: Question about extension RAM on Satellite M60

  * Extension of RAM *:
  What type of memory should I buy if I want to prolong 512 MB to * 2 GB * or more for
  * Satellite M60 *-182 under Editon Windows XP with Service Pack 2 home
  I mean: frequency, symbol, producer, etc. to work properly?
  oczkim

  Hello

  your machine can be upgraded to a maximum capacity of 2 GB main memory, which means:

  to extend the memory to the limit of what the machine is capable of, you have to put 2 x 1 GB DDR2-S0DIMM modules with a frequency of 533 Mhz into the two slots of your machine.

  I propose the following brands: Toshiba, Kingston, OCZ

  Greetings

• Satellite P100-240: Question about upgrade RAM and HARD drive

  I want to upgrade my laptop (p100-240), where would I find the 2 GB of ram for this go to 667 mhz + can be you add another HD and you run a raid Setup?

  Hello

  Of course, you will notice an increase in performance. The upgrade from 1 GB to 2 GB is a lot.
  I have much heavy app will load faster and you might be able to use more whole--> multitasking applications

• Question about upgrading RAM on Satellite A200-1CR

  Hello

  I have the Satellite A200-1CR, PSAE0E-02G01TSK
  I have 2 GB of RAM
  I can install 4 GB of RAM (because I try 2x2Gb 800 MHz) and don t work.

  Do I only 667 MHz or my laptop supports only 2 GB?
  Thank you

  Hello

  Your laptop can be upgraded to 2 GB top only and for the upgrade you must use 667 MHz compatible modules.
  To correctly update I recommend 2 X 1 GB DDR2-667 with PA3512U-1M1G part number.
  Good bye

• HP Presario CQ60-211DX: Question about adding ram

  My moms HD took a dump and I'll replace it and update the ram.  After defining and entry model information site, she came back with a couple different options.  He says that I can use PC2-5300 or PC2-6400.  The PC processor is a Celeron 585 2.6 single core with a 667 Mhz FB.  As I understand it, requires PC2-5300 667 Mhz FSB of the processor?  (This is what I guess I)  PC2-6400 runs at 800 Mhz FSB?  I just think?  And what advantage would I using the PC2-6400 on the 5300 with my current set in place?  He said that the two are compatible and they are at the same price.  Help, please.

  Thank you

  Ricky Brown

  Your a chipset GL40, which culminates in the DDR2-667. Also known under the name of PC2-5300 (same thing). So you can install DDR2-800, but it will run at the same speed that is 667 mhz DDR2-667. If they are both the same price get the DDR2-667. DDR2-800 is generally a bit more available and a little less money, believe it or not, but apparently not where you found it.

• Satellite L50 - A - 1 5 - question about max LAN speed

  Qualcomm-Atheros AR8171/8175 PCI - E Gigabit Ethernet Controller (NDIS 6.30)

  In the specifications it is said that this network adapter might work on the speed of the LAN 1 Gbps 1000base-t.
  But the max speed that is displayed on my system is 10BASE-T/100BASE-TX.
  Why?

  System: _
  Toshiba Satellite L50 - A - 1-5
  Windows OS 8.1
  Driver version 2.1.0.21
  Qualcomm-Atheros AR8171/8175 PCI - E Gigabit Ethernet Controller (NDIS 6.30)

  You're right, the network adapter. Atheros QCA8171B supports networks: 1000BASE-T/100Base-TX/10Base-T

  To use the range, the router should also support the 1000BASE-T.
  Did you check that?

  In addition, you can change the LAN settings in:
  Device Manager-> LAN card-> properties-> Advanced tab

  Here, you should check if 1000BASE-T option is selected and chosen.

  I also recommend you check the BIOS settings because as fat I know some LAN function can be enable/disable in the BIOS