HP 2605DN printer: volatility declaration – for HP 2605DN printer
Hello
I need a 'statement of volatility' for an older printer model #: HP 2605DN.
Please send me a link or a PDF to my personal email (removal of information).
Thank you very much
Or is that what you're looking for:
Printers HP Color LaserJet 2605 Series - certificate of volatility
Introduction
The following is a statement about the volatility of the customer data stored in memory of the HP Color LaserJet 2605 printer devices.
Information
The printer uses volatile memory to store data from customer during the printing process. When the printer is off, this volatile memory is cleared.
The printer uses a non-volatile memory to store the configuration information of the customer. This nonvolatile memory may be erased and restored to the factory defaults by a cold Reset.
NOTE: Cold reset, power cycles the motor with a special button is not supported for this printer. Instead, please use the "Restore defaults" located in the Service menu to reset the default settings.
Follow this procedure to restore the default printer settings:
- Use the (left arrow) or the (right arrow) button to select Service and press (select).
- Use (left arrow) or the (right arrow) button to select restore default settings and press (select).
- The printer restarts automatically.
Assistance, please contact technical support to HP LaserJet.
Tags: HP Printers
Similar Questions
-
How to show the multiple declaration for an application
How to show the multiple declaration for an application
Thanks for your suggestions...
Looking at the javadocs you can only save an indicator by application. You will need to do three separate applications and package them as an If you want three different indicators to be visible at a time. Or change the flag that (or which group) of the indicators you want to display.
-
Some information:
I am trying to create a reusable toolbar for the behavior of af: standard table, see screenshothttp://wesfang.files.WordPress.com/2013/05/DC.jpg
I had the idea of documentation, Frank has published in the past by
1. http://www.oracle.com/technetwork/developer-tools/adf/learnmore/001-access-declarative-comp-attr-169113.pdf
2. Add a new line by programming
The page of the subsystem of your past in a "MyPageBean" which is a subclass of a 'ArchBean' where all actionlistener operations are defined. The idea here is to minimize the developer customizing when using this component.... <f:facet name="toolbar"> <af:toolbar id="t2"> <mskcc:basicTransactionToolbar id="btt1" pageBean="#{MyPageBean}" tableId="t1"/> </af:toolbar> </f:facet> ...
The table on the page of your default is filed "editable" tabular The developer must change the attribute 'disable' true for all fields of seizure and control components in the table. I would like to remove this step of developer and have rather in an architectural element. All ideas are welcome.
Hello
If the table is added in a facet of the declarative component toolbar, then you can access them in your component code declarative. The table has columns as his child, and each column has UI components such as child components. You can access these UI components and programmatically set the disabled property. All you need to know is the 'trigger' of this deactivation point. Can you try and create a custom declarative component impl class and use the method encodes?
Frank
Published by: Frank Nimphius, May 16, 2013 09:01
-
Component attribute declarative for action in the link layer
Hello
I have a component declarative which includes buttons to add/remove/save/cancel that I hope to use to the standardization of page layouts. I need to assign two properties for each button, the actionlistener and the enabled property.
For the button of validation for example I would attribute actionlistener for * #{bindings.Commit.execute} * and I would set the enabled property to * #{! bindings.Commit.enabled} * which would allow the validation button only if there was something to engage, if the action of CreateInsert had been carried out for example.
And I would create attributes in the declarative element to these two parameters.
What I want to know is is there a way that I can pass the action itself #{bindings.Commit} as an attribute in the component declaration so that I can reduce the number of attributes (and ease of development), and if yes, what type this attribute will be.
Thank youHello
Create an attribute of type OperationBinding (full path) and you're good to go. I did the same thing with the DCIteratorBinding
Frank
-
A security flaw has been declared for the routers in EA6100-EA6300
In December 2015, it was reported that a security breach has been identified for routers EA6100-6300. The links below details:
https://www.korelogic.com/resources/advisories/KL-001-2015-006.txt
http://www.theregister.co.UK/2015/12/08/linksys_routers_vulnerable_through_cgi_scripts/
Linkys confirms this report? If so, is it fix identified, and when it comes out in a new SW construction?
Hi Buddiemac! Thank you for that bring to our attention. It is preferable that you will have this challenge reported to the security team. You can contact them by e-mail at [email protected].
-
Is this declaration for the creation of correct active standby pair?
Hi, I have two servers, one is "baal" and the other is "diablo".
I want to create a pair of active standby with the RETURN of TWOSAFE and disable the BACK after that 5 times timeout happens and resume BACK if less than 8 ms recognize.
I do not sure if 8 ms is reasonable if the starting node is far behind the active node (assuming the starting node is to hardware failure).
Here's my response:
--------------------------------
PAIR of EVE ACTIVE CREATE eppdb WE "baal", eppdb ON "diablo."
RETURN TWOSAFE
STORE eppdb WE 'baal '.
DISABLE THE BACK EVERY 5
CURRICULUM VITAE OF RETURN 8;
-------------------------------
Is what I'm not clear on the key word "STORE."
I noticed that there are a lot of 'STORE' after RETURN of TWOSAFE and make that confused me for a while.
If this assertion is false, please correct me.
Thank you.In fact, these options apply to the store level so that the statement is as follows:
CREATE A PAIR OF ACTIVE STANDBY
eppdb WE 'baal', eppdb ON TWOSAFE of RETURN "diablo."
STORE eppdb WE 'baal '.
DISABLE THE RETURN ALL 5 HP BACK 20
RETURN SERVICES TURNED OFF WHEN THEY ARE ARRESTED
SUSTAINABLE COMMITMENT ON
COMMIT LOCAL ACTION VALIDATION
WAIT BACK 30 TIMES
STORE eppdb ON "diablo."
DISABLE THE RETURN ALL 5 HP BACK 20
RETURN SERVICES TURNED OFF WHEN THEY ARE ARRESTED
SUSTAINABLE COMMITMENT ON
COMMIT LOCAL ACTION VALIDATION
WAIT BACK 30 TIMES;All these options and what they mean are described in detail in the (very good) documentation. I would recommend that you read in order to understand that you configure here... Just a summary.
Whenever the wait isn't available, application commits will experience timeouts (TT WARNING 8170). Request code must be prepared to receive and respond to this warning. Finally (according to the options DISABLE RETURN and RETURN WAIT [see below]) TT come back asynchronously and wait times stops. Once sleep is available and the stores are back in sync TT will increase from TWOSAFE BACK mode once again.
DISABLE BACK every 5 - turn off the twosafe return (i.e. emergency in asynchronous mode) treatment after 5 consecutive times (each timeout will be 30 seconds)
BACK to the TIME of WAITING 30 - wait up to 30 seconds (a very long time) for recognition in return for service to the peer
The combination of these two parameters means that in the event of network failure or the eve past active offline will be waiting for about 150 seconds (5 x 3) before disabling the twosafe return processing. During this time of transaction request will be and experience timeouts. I would suggest smaller values such as 2 and 10 maybe but only t = OU can decide what is reasonable for your environment.
SUSTAINABLE if ENGAGING ON - whenever the return services are then disabled, force all commits to be sustainable (synchronous disk). This will degrade performance, but provides continuous data protection when the instance of relief is not available. If you don't want this feature so do not configure (but then when the watch is not available you are exposed to data loss if the assets fails).
RETURN SERVICES OFF when THEY are ARRESTED - disable services return (spend in asynchronous mode) each time the replication agent stops.
LOCAL validation ACTION COMMIT - if a validation Gets a time-out warning (TT8170) then the transaction status is uncertain. The application can choose to engage locally (allowing it to continue the treatment), in which case the txn is committed. will be added to the queue of replication for a (possible) retransmission in asynchronous mode. It is the recommended behavior and is defined by this option. The other option is NO ACTION, which is also the default value. With this option, the application must implement the logic for its own decision, and then call a few specific TT builtin functions to decide how to deal with the uncertain state. This adds significant complexity. Until the application makes a decision, it is impossible to continue.
See the documentation for more information.
-
If the declaration for a wrong answer and right
OK, Hello and thanks for posting. Includes the project1 breakdown of the ISSUE
2. you enter your answer in a text ENTRY box
3. click on enter - button.
4. There is a wrong answer which is Ox and the correct answer is O
4. According to your response it jumps you to the screen wrong answer or congratulations!
the inserted code is different from the book,It shows that;
on (release) {}
If (½la is "Ox")
(_root.answer.gotoandplay (5)})
Then theres another
on (release) {}
If (response == Ox) {}
gotoAndPlay (5)
(5) = the good screen and (10) is the incorrect screen if they choose = O
the variable for the input text box = response
Thanks for your help
only a fool would require coding attached to your button. If it's your teacher, you have an incompetent teacher unless they're trying to make a point about the problem how it is for attaching code to objects.
Use a real (not a movieclip) button:
{We (Release)}
{if(iTF.Text=="OX")}
_root. Answer.gotoAndPlay (5);
} else {/ /}<- this="" is="" probably="" what="" you="" want="" instead="" of="">->
_root. Answer.gotoAndPlay (10);
}
-
If the declaration for a calculation.
I have a form with a field (field) that require a number. I have another non fillable field (domain B) where I need to do the math. If the field is less than or equal to 100, I need the output to 10. If its higher than 100, then the calculation is (field *. 1.) Can someone help me write this code?
Try this custom calculation script:
Get the value of the input field, as a number
var v1 = + getField("TotalActive").value;
Set the value of this field based on the input value
If {(v1 > 100)
Event.Value = 0.1 * v1;
} else {}
Event.Value = 10;
}
-
After having included an implicit call to a dll, I created in LabVIEW, I get the error link next project, incompatible type declarations for external symbol '_TheActiveMeasurementPath' modules ' c:\Home\EChamberSystem\cvibuild. ECALsystem\EGunControlHandler.nidobj' and ' c:\Home\EChamberSystem\cvibuild. ECALsystem\AlarmsAndWarnings.nidobj'.
What does that mean?
After checking your function prototypes as Ray says, I just delete the directory cvibuild (under the directory of the project) which is where are all the niobj files and rebuild your project. There is a rare combination of events where the compiler/linker CVI knows not to rebuild it. If you remove the cvibuild directory, it will force you to completely rebuild.
-
What is the significance of the CURSOR WITH HOLD clause in a cursor declaration?
What is the significance of the CURSOR WITH HOLD clause in a cursor declaration?
A cursor that has been declared with the clause WITH HOLD, after the word CURSOR remains open after a COMMIT or a ROLLBACK. The following example shows how to use the following clause:
EXEC SQL DECLARE C1 CURSOR WITH HOLD FOR SELECT ENAME FROM EMP WHERE EMPNO BETWEEN 7600 AND 7700 END-EXEC.
The cursor must not be declared for the UPDATE. The WITH HOLD clause is used in DB2 to override the default, which is to close all cursors on validation. Pro * COBOL provides this clause in order to facilitate the migration of applications to DB2 to Oracle. When MODE = ANSI, use Oracle DB2 default, but all host variables must be declared in a declare Section.
Reference:
Oracle documentation!
http://docs.Oracle.com/CD/B10501_01/AppDev.920/a96109/pco03dbc.htm -
Assign dynamic statement declaring the block or block start
Hi all
For code below, if I attribute the select statement in the section declare for the corresponding variable, it will improve performance.
For cust_veh_id we have another block cursor to declare, only partial code is provided.
What I wanted to.
Actauldeclare v_addr_chg_stmt varchar2(2000) := 'select ''Y'' FROM cust_addrs addrs WHERE customer_id = :v_customer_id AND updated_date >:p_end_date and rownum = 1';
---------
Thank youdeclare p_end_date date; v_addr_chg_stmt varchar2(2000); v_mileage_stmt varchar2(2000); begin select updated_date into p_end_date from process_log_rfsh where tran_code ='CAP'; v_addr_chg_stmt := 'select ''Y'' FROM cust_addrs addrs WHERE customer_id = :v_customer_id AND updated_date >:p_end_date and rownum = 1' ; v_mileage_stmt := 'SELECT ''Y'' FROM cust_vehicles_audit WHERE cust_veh_id=:v_cust_veh_id AND field_name =''LAST_MILEAGE'' AND added_date > :p_end_date and audit_date >= trunc(:p_end_date) and rownum=1' ; begin execute immediate v_addr_chg_stmt into v_addr_change_flag using v_customer_id, p_end_date; exception when no_data_found then v_addr_change_flag:='N'; end; begin execute immediate v_mileage_stmt into v_mileage_change_flag using v_cust_veh_id, p_end_date, p_end_date; exception when no_data_found then v_mileage_change_flag:='N'; end; end;
Rambeau
Published by: Raghu on January 18, 2013 13:13Rambeau wrote:
This code is already running in production for a few years.Not a reason to justify using dynamic SQL.
YOU NEED a JUSTIFICATION FOR the USE of DYNAMIC CODE. In any language.
Once again: WHAT is your justification? If you can't provide that, so why you use code Dynamics?
If you must use dynamic sql statements, performance definition wise to declare the block or start will be better.
No difference - as no method doesn't change the actual SQL cursor run. Nor did the resulting cursor read faster data blocks.
PL/SQL also does not care where the variable assignment happens. The difference is so small and so small, it is not relevant to the performance:
SQL> declare 2 t1 timestamp; 3 begin 4 --// test 1 5 t1 := systimestamp; 6 for i in 1..10000 loop 7 declare 8 num number; 9 begin 10 num := 1; 11 end; 12 end loop; 13 dbms_output.put_line( 'Test 1. '||to_char(systimestamp-t1) ); 14 15 --// test 2 16 t1 := systimestamp; 17 for i in 1..10000 loop 18 declare 19 num number := 1; 20 begin 21 null; 22 end; 23 end loop; 24 dbms_output.put_line( 'Test 2. '||to_char(systimestamp-t1) ); 25 26 end; 27 / Test 1. +000000000 00:00:00.000040000 Test 2. +000000000 00:00:00.000024000 PL/SQL procedure successfully completed. SQL>
-
Framework 11
DITA 1.2
Restrictions independent of our will, we must use the names of product ridiculously long. So I want to use drop-down lists to make it easier for authors select a < prodname > in the metadata.
What I did:
1. in metaDecl.eddmod.fm, I have created a new attribute and named it prod.
a. I made the choiceand required.
b. choices are currently only internal and RTVI for testing purposes. I'll put those absurdly long when I work.
c. I have a prefix rule of: in all contexts prefix: product name: < $attribute [prod] >
2. I imported metaDecl.eddmod.fm at all these EDDs:
In the ESD home folder:
- Basemap. EDD. FM
- basetopic. EDD. FM
- Map.eddmod.FM
- topic.eddmod.FM
In the folder technicalContent EDD:
- concept. EDD. FM
- ditabase. EDD. FM
- generalTask.edd.fm
- GlossEntry. EDD. FM
- glossgroup. EDD. FM
- Reference.EDD.FM
- Task.EDD.FM
- topic. EDD. FM
3. I imported element definitions in all of the following conditions:
- ChapterOutputTpl.fm
- basemap.template.FM
- basetopic.template.FM
- basetopic.template.FM
- topic.template.FM
- generalTask.template.fm
- glossentry.template.FM
- glossgroup.template.FM
- Map.template.FM
- ditabase.template.FM
- Reference.template.FM
- concept.template.FM
- Task.template.FM
4. I imported task.template.fm elememted definitions in my test paper (Yes, that's a topic of task).
What happened:
I get the following in the console error message:
XML Parser (Document Instance) messages
Error in H:\DITA_Westminster\Procedures - DITA\Inserting_Product_Names_Versions_In_Metadata\InsertingProductNamesAndVersionsInMetad Our ata.dita.82F, line 28, char 49, Message: 'prod' attribute is not declared for the element "AutoCAD"
Error on line 28, 71 char, Message: not enough information to match the content model ' (prodname, vrmlist, ((brand|component|featnum|platform|prognum|series)) *)'
What I did then:
1. I removed all elements of the general rule of < prodinfo > with the exception of < prodname >. (< prodinfo) is the one who had prodname, vrmlist, (brand | element | featnum | platform | prognum | series) as a general rule. I also did a thorough search to ensure that nothing else had this same element list in the general rule. I could not found.
2. I did import the EDDs thing and models again.
3. I got the same error again. < sigh / >
Question:
Why am I still these 2 error messages? They are driving me crazy.
Marsha
The EDD contains rules probably derived from the DTD structure, but is a separate file that is used by the structured Application.
You should be able to see the location of your DTD in the StructApps file. Use Structure tools > edit the structured Application file to open it in the menu of the FM.
-
Procedure declarations section
Hello
I'm working on my first procedure (I'm new to the PL/SQL) and experiences some confusion around the declarations section. When I run the following code, it says "PLS-00201: identifier 'L_MONTHLY_DED_AMNT' must be declared ' for each value I in the declarations section. From what I read in books and online, it seems to me that I have found them properly and messing around with different variants does nothing to solve my problem.
Revised to include all the code.PROCEDURE create_contract ( l_prov_num IN NUMBER, l_divison IN NUMBER, l_clinic_source IN VARCHAR2, l_clinic_location IN VARCHAR2, l_tot_ded_amnt IN NUMBER, l_num_deductions IN NUMBER, l_tot_ded_amnt IN NUMBER, l_emp_id IN NUMBER, l_mrn IN NUMBER, l_emp_first_name IN VARCHAR2, l_emp_last_name IN VARCHAR2, l_pat_first_name IN VARCHAR2, l_pat_last_name IN VARCHAR2, l_personkey OUT NUMBER ) IS l_monthly_ded_amnt NUMBER; -- := l_tot_ded_amnt / l_num_deductions; l_contr_start_date DATE; --:= SYSDATE; l_current_cutoff DATE; --:= SYSDATE; BEGIN l_monthly_ded_amnt := l_tot_ded_amnt / l_num_deductions; SELECT TO_CHAR (CURRENT_DATE, 'DD-MON-YYYY') INTO l_contr_start_date FROM DUAL; SELECT cutoff_date INTO l_current_cutoff FROM prd_ded_cutoffs WHERE (cutoff_month || '-' || cutoff_year) = TO_CHAR (CURRENT_DATE, 'MON-YYYY'); IF l_contr_start_date > l_current_cutoff THEN SELECT TO_DATE (TO_CHAR (( ADD_MONTHS (SYSDATE, l_num_deductions + 1) - TO_CHAR (ADD_MONTHS (SYSDATE, l_num_deductions + 1 ), 'dd' ) + 1 ), 'dd-mon-yyyy' ) ) INTO l_contr_end_date FROM DUAL; ELSE SELECT TO_DATE (TO_CHAR (( ADD_MONTHS (SYSDATE, l_num_deductions) - TO_CHAR (ADD_MONTHS (SYSDATE, l_num_deductions ), 'dd' ) + 1 ), 'dd-mon-yyyy' ) ) INTO l_contr_end_date FROM DUAL; END IF; validate_emp (l_emp_id, l_mrn, l_emp_first_name, l_emp_last_name, l_pat_first_name, l_pat_last_name, l_personkey ); INSERT INTO prd_contract (contract_key, person_key, provider_key, division, ccc_clinic_source, ccc_clinic_location, total_deduction_amount, number_of_deductions, monthly_deduction_amount, remaining_balance, remaining_deductions, contract_start_date, contract_end_date ) VALUES (prd_contract_seq.NEXTVAL, l_personkey, l_prov_num, l_divison, l_clinic_source, l_clinic_location, l_tot_ded_amnt, l_num_deductions, l_monthly_ded_amnt, l_tot_ded_amnt, l_num_deductions, l_contr_start_date, l_contr_end_date ); COMMIT; EXCEPTION WHEN OTHERS THEN raise_application_error (-20001, 'An error was encountered - ' || SQLCODE || ' -ERROR- ' || SQLERRM ); END;
Published by: Tinlemon on July 21, 2009 12:46Hello
You should start with a very, very small procedure and add little by little code, especially if it's your first procedure.
Start over. (What you already have is not lost, you can cut it and paste it into the new proceudre.)
As a first step, try to create the procedure with no argument and a local variable (such as l_monthly_ded_amnt).
If you have any problems, post the full code (starting with ' * PROCEDURE to CREATE ").I don't see obvious errors in the part you posted.
-
How can I remove the tab from the new iTunes update?
Hi all
I've just updated my iTunes (Version 12.4.0.119) on my Macbook (Version 10.11.5), and there is the tab on the left side, declaring for example in the music section; recently added albums, artists, etc. I wanted to know how to hide this tab if it is possible?
Thank you.
In the iTunes menu bar, hide-> sidebar display.
-
Satellite A30 product recovery CD
I need to restore the HD of Satellite A30 of my boy.
He gave me that one DVD 'product Recovery DVD-ROM'
He is also says "2/2", which I suppose that it is disk 2 of 2.This DVD is not bootable. so I guess there could be a disk of 1/2 which is bootable and contains the basic recovery program.
My question: am reason above supported and if yes, where can we get the first DVD, since my boy seems to have lost it.
Thanks for any help.
Peter
Hello
You are right! There must be a n ° 1/2 recovery DVDs!
If you (or your son) have lost it, you can order a new one for every Service Toshiba partner. You only have to sign a solemn declaration for MS that you have lost the CD!
To http://eu.computers.toshiba-europe.com when you go to the support & downloads you will find a list of partners of Service Toshiba!
Tanya Bye
Maybe you are looking for
-
Satellite Pro U400 starts not-cannot start Windows
So I have no idea what caused this minute, it's nice, I look at things on the next screen thing 4od is empty and not coming back so I hold down the power button to restart and a black "windows boot manager" is displayed and I can not fundamentally ge
-
For Satellite M50 battery recall
Hey all,. I have a laptop of Satellite M50 running Ubuntu 8.04 and this morning I got a message saying that my battery could be the subject of a recall. I went on the site, he noted, and he said that my cell phone was on the list, but my battery was
-
while trying to play the daily challenges, I get the error code 002408, this happened a few months ago and proved to be something to do with an update, now it happened again and I can't find comments about it - anyone else having this problem?
-
When using Autodesk Architecture 3.3 and opening a working file, I get the error error message "there was a problem sending the command to the program". What does that mean? At the same time (or nearly the same time) trying to create a pdf from a dra
-
6500 E709n wireless printer control panel is not readable?
My Control Panel on my 6500 E709n series all-in-one wireless printer is all confused and I cannot read it, what can I do about it? I use Windows 7 Home premium on 2 desktop computers, 1 XP on 1 computer desktop and Windows 7 Home Premium on my lapto