HP 430 G2: drivers

Similar Questions

• ProBook 430 G2: Cannot dowload for Probook 430 G2 drivers

  Hello

  I try to download the drivers for my HP Probook 430 G2 in recent days, as two fingers on the trackpad scrolling does not work. However, Web sites with drivers are not available. For example, http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6943803 does not work.

  Any help would be appreciated.

  Best, Marjolein

  marjoleinf

  I just tried this link to HP Web site and it works.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Network Card Drivers needed

  Hi, here is the situation that I am:

  I tried to install both Windows 7 and Windows XP on my hard drive, with Windows 7 being the original installation, so I created a separate partition and install XP.

  Everything went smoothly, except Windows XP does not detect my Ethernet card.  (I hope that it's just that I need the right... drivers)

  I can't access my install of Windows 7, because Windows XP does not start in Windows 7.  So I'm stuck using my old computer, which also has Windows XP 32-bit.

  Here is the information for my HP computer:

  Model: p6203w

  Windows XP Professional 32-bit

  I'm not sure what is the Ethernet card, but I think that it can be found with the model number.  I don't know where to look.

  Any help is GREATLY appreciated.

  CotyRSKL wrote: Hi, here is the situation I'm in: I wanted to install both Windows 7 and Windows XP on my hard drive, with Windows 7 being the original installation, so I created a separate partition and install XP. Everything went smoothly, except Windows XP does not detect my Ethernet card.  (I hope that it's just that I need the right... drivers)   I can't access my install of Windows 7, because Windows XP does not start in Windows 7.  So I'm stuck using my old computer, which also has Windows XP 32-bit. Here is the information for my HP computer: model: p6203w

  Windows XP Professional 32-bit I don't know what is the Ethernet card, but I think that it can be found with the model number.  I don't know where to look. Any help is GREATLY appreciated.

  Hello CotyRSKL, I checked the specifications of your system, and it shows the Realtek RTL8201N ethernet device.

  The Realtek RTL8201N is what is called a device driver. In other words, it works via the chipset of the motherboard.

  Your chipset is Nvidia GeForce6150SE nForce 430. This chipset driver package is the software that should allow the Realtek network device works under Windows XP x 86 (32 bit).

  Here is the link where the Nvidia GeForce 6150SE nForce 430 chipset drivers.

  Just go on the linked site, click the primary download site, accept the license agreement and download these drivers on your Windows XP partition boot and install these drivers.

  Your ethernet network device should now work.

• drivers for HP Probook 430 g1

  Hello

  I recently bought my HP Probook 430 g1 and found no drivers for the following adapters:

  Ethernet controller

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1946103C & REV_0C

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1946103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  PCI Simple communication controller

  PCI\VEN_8086 & DEV_9C3A & SUBSYS_1946103C & REV_04

  PCI\VEN_8086 & DEV_9C3A & SUBSYS_1946103C

  PCI\VEN_8086 & DEV_9C3A & CC_078000

  PCI\VEN_8086 & DEV_9C3A & CC_0780

  (USB) universal serial bus controller

  PCI\VEN_8086 & DEV_9C31 & SUBSYS_1946103C & REV_04

  PCI\VEN_8086 & DEV_9C31 & SUBSYS_1946103C

  PCI\VEN_8086 & DEV_9C31 & CC_0C0330

  PCI\VEN_8086 & DEV_9C31 & CC_0C03

  Unknown device

  ACPI\HPQ6007

  * HPQ6007

  Thank you

  Friend

  Ethernet controller

  FTP://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63213.exe

  PCI Simple communication controller

  FTP://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67047.exe

  (USB) universal serial bus controller

  FTP://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61820.exe

  Unknown device

  FTP://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64934.exe

• Clean the concert of dual core 2.4 Install windows 7 Dell XPS 430, drivers RAID DO RAID the relationship.

  Clean the concert of dual core 2.4 Install windows 7 Dell XPS 430, drivers RAID DO RAID the relationship. Two 1 TB drives, WD Black Cavier. 1. I wanted to know if I should format the OS drive first, before installation or installation? 2 should I let a slave to data disc (data is stored) or remove the installation? and 3 if I don't have a RAID relationship do I need to install RAID drivers with the installation with USB?

  Hello

  I suggest you to refer to this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/need-steps-to-configure-RAID-1-in-Windows-7-OS/3ec151ee-213C-4D04-a0f4-1d8c7eb6c1f3

  It will be useful.

• Windows 7 Enterprise 64-bit drivers for HP Probook 430 G1

  Hello

  I'm looking for the following drivers:

  network controller

  PCI\VEN_168C & DEV_0036 & SUBSYS_18E3103C & REV_01
  PCI\VEN_168C & DEV_0036 & SUBSYS_18E3103C
  PCI\VEN_168C & DEV_0036 & CC_028000
  PCI\VEN_168C & DEV_0036 & CC_0280

  PCI device

  PCI\VEN_10EC & DEV_5227 & SUBSYS_1946103C & REV_01
  PCI\VEN_10EC & DEV_5227 & SUBSYS_1946103C
  PCI\VEN_10EC & DEV_5227 & CC_FF0000
  PCI\VEN_10EC & DEV_5227 & CC_FF00

  Thank you

  Friend

  Hello:

  You need these drivers:

  network controller:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5379212&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118918_1%257CswEnvOID%253D4060%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  PCI device:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5379212&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_134503_1%257CswEnvOID%253D4060%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Can't help you on your question about the hard drive.  The description seems fine for me.

• Problem with the HP 430 (bluetooth and teredo tunneling Pseudo-Interface) drivers

  Hello

  recently my bluetooth function cannot to connect to other devices... This is what happens to the Device Manager:

  

  What is teredo tunneling pseudo-interface is for? is it important?
  If so, how to solve this problem?
  How to solve the problem of the bluetooth?

  Generic Bluetooth adapter:
  USB\VID_03F0 & PID_311D & REV_0001
  USB\VID_03F0 & PID_311D

  Teredo tunneling pseudo-Interface:

  * TEREDO

  Go to Device Manager, right click on the device and select Update driver. Path to the .inf file that you downloaded for use.

• Pavilion m8357 need drivers

  Hi I have a HP m8357 with windows vista. I uninstalled vista and installed xp but none of my drivers will be installed. Is there a link for the drivers to lift this pc and rerun

  Here what ya go. Your motherboard has a GPU NVIDIA GeForce 6150 and NVIDIA nForce 430 MCP GPU and chipset. The Windows XP drivers are included in this version of Geforce 178.

• Compaq Presario SR5019UK drivers audio xp

  I have a Compaq Presario SR5019UK with vista. Vista gave me a lot of problems so I decided to put xp on the computer and get rid ov vista. the probem is that drivers card his disaperd so I'm looking for drivers that work with xp?  anywone hellp can.

  When you install the chipset driver you need to restart.
  NVIDIA nForce 430
  http://www.nvidia.com/object/nforce_winxp_15.26.html

  You must use the Microsoft UAA for XP sp3 audio driver.

  Install the UAA and try the audio driver I posted.

  UAA MS (XP SP3):
  http://couponmeister.com/blog/HD_Audio/KB835221.exe

  Other drivers that you may need.

  graphics card driver: NVIDIA GeForce 6150SE / THE
  http://www.nvidia.com/object/winxp_185.85_whql.html

• NVIDIA GeForce 6150SE nForce 430 code 19 error

  Hello

  I am running Windows Vista Home Premium 32-bit and have encountered a problem with the graphics drive. There is an exclamation mark next to the NVIDIA GeForce 6150SE nForce 430 in the graphics card and the error message is "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  It is up to date and there is no driver to restore. I uninstalled it and upon restarting, Windows successfully installed the driver, but the exclamation mark is still there. It has been suggested that I choose option 2 here to search for the drivers and Graphics Driver 280.26 has been found to install, but it made no difference. I don't know if it's important that I tried to uninstall it once before and selected the 'remove the software for the device option', but who do not select the second time.

  When I select 'check for solutions' in Device Manager there are two long files that describe the error. I downloaded here and here.

  The only problems is originally so far (or at least I suppose is caused by this because it happened at the same time) is that I can't select 1440 x 900 for a resolution of the screen so my screen is off, and I can put my computer in mode 'sleep'. Sleep is grayed out in the options. Any help is very appreciated. Thank you!

  

  So, after two weeks of multiple uninstalls, reinstall, install clean, destruction of registry, driver, using different drivers sweepers, spend time with the customer of NVIDIA and passing by each troubleshoot I could Google, I removed the HP Portrait display 1.4 update and now all is well. That had been installed AFTER that I started having the problem with NVIDIA so I guess it started as a small bug (the driver for my mouse also stopped working at the same time as the graphics card, but that was a simple fix) that the HP update is impossible to fix.

  Thanks for your help, Paul!

• Satellite Pro 430 CDT - boot disk problems

  I have a toshiba satellite pro 430 cdt which I am trying to re - install windows 95 (I have win 95 on cd) on with no luck at the moment.

  I downloaded the two files from bootdisk from www.bootdisk.com, win95a and win95b, but have neither the right cd rom driver, so then I got put www.driverguide.com driver this driver on startup disk and change the config file to use the correct driver and I always get the message that no driver for cd rom drive was found.

  I don't know if the cd rom drive no longer works, even if the green light on the side flashes when you eject the disc that told me that things seem ok (maybe wrong here however). I have the cd rom plugged into the Bay on the right side of the machine (internal) and drive in the caddy it is connected on the left side of the machine (external) and even if I swap them on the cd rom drive does not work but the floppy drive works in two ways. If the connector edge on the cd rom drive doesn't work properly or the drive itself is shot.

  If I remember correctly when the boot disk works correctly it should give you 3 or 4 options (don't remember that it was a long time ago I finally did, and I did not work boot disc, DOH!), which one should be something like, "install windows with the cd rom support" or something like that.

  Once I get this I am ok I have win 95 on cd, and it is quite simple installation there from there that I built a few pc and installed different versions of windows with no true front hassels.

  Did he have the same machine as me (uk version) and able to compress all the files on a boot floppy from win 95 work and e-mail it to me?

  Or just files autoexec.bat and config.sys are all I really need (as long as they work those). Anyone know anywhere I can get my hands on one set of diskettes originally supplied with the machine that I seem to have lost mine, I think there were two or three players but no windows cd, I bought my copy (legit) from a computer fair years.

  Will provide you with my e-mail address later if necessary.

  Thanx

  Steve Jones

  Hi Steve

  I found the information that the device was shipped with 10 x player XM - 1502-B.

  Check this box:
  http://www.cdrom-drivers.com/companies/1066.htm

  There you can find a lot of drivers for different units. But maybe it's something wrong with the occupation of s PIN. In addition, you can ask the service partner for advice.

  Good bye

• Satellite U500 - 1 6 - some missing drivers on Windows 7

  Hello.

  Satellite U500 - 1 6, Windows 7 Ultimate edition.
  I downloaded the drivers of page service for similar model with i5 - 430 m because there are no drivers available for my own T - A still.

  But after installing the drivers, I found that the system did not some drivers because the digital signature is not fair.

  Drivers for:
  -Driver Turbo boost
  -Bluetooth (Bluetouth ACPI)
  -Ricoh card driver reader

  Can you help me with this?

  Hi Said,

  What version of Windows 7 you are using? 32-bit or 64-bit?
  For 64 bit I can find all the drivers for your laptop. It belongs to the series of PSU9ME according to the Web from Toshiba website.

  In addition, it would be interesting to know if you get an error message during the installation of the drivers.

  I would recommend also installing the drivers yourself through the Device Manager where you can choose the driver yourself.

• ProBook 430 G1: How to activate Bluetooth on ProBook 430 G1?

  In order to install one of the Bluetooth drivers, I need to activate the Bluetooth device on my laptop. How it's made for the ProBook G1 430? The BIOS indicates it is enabled. I have the wifi abgn 2 x Broadcom 2 (QOS-BRCM1058 FCC).

  Thank you.

  Hello:

  The HP Wireless Assistant software is not applicable to your model.

  Your model uses the HP Connection Manager software, which replaces the HP Wireless Assistant software used on older models.

  It does basically the same thing.

  The key is that if you had the bluetooth radio is the Manager connection and reinstalled the operating system software, you must reinstall the software of connection manager in order to turn on the bluetooth radio.

  It would also apply to the wireless card if that was extinguished by the connection manager software until the operating system has been reinstalled.

  That's what you need to install.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5387722&swItemId=ob_134880_1&swEnvOid=4059

• HP DesignJet 430: HP DesignJet 430 and win 10 64-bit - required driver signing enforcement?

  Hello. Is the deactivation of the application of driver signing Win 10 required to install this printer HP DesignJet 430 64-bit (driver Vista or XP 64-bit):

  hpdj430x64glen.exe version 4.83 (I think)

  A customer wants the 430 to work with Win 10 64 bits; I don't want to have to go through the disabling stages if I have to. I don't think I have to. I think that it is a 'signed' driver

  Paul

  The driver here is the file you mention.  I just downloaded and installed in Windows 10 x 64 and it does not report that the drivers are signed.  You wouldn't have to disable driver signing.

  

• HP laptop 430 - QG621PA: wireless connectivity problem

  Serial number HP - [personal information deleted]

  I recently changed my Linux Mint OS to Windows 7 Professional 64 bit.

  Does not detect my wifi HP 430 but the wired connection works fine. The color of the led remains in "orange".

  In the network controller under Device Manager is the hardware id

  PCI\VEN_168C & DEV_002B & SUBSYS_1461103C & REV_01
  PCI\VEN_168C & DEV_002B & SUBSYS_1461103C
  PCI\VEN_168C & DEV_002B & CC_028000
  PCI\VEN_168C & DEV_002B & CC_0280

  It shows a warning sign. I have attached for your reference image.

  

  Pleas help me.

  Hello:

  You need these drivers... I posted the in the order the devices that need drivers are shown in your screenshot.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5086734&swItemId=ob_95054_2&swEnvOid=4058

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_108905_1

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5086734&swItemId=ob_93202_2&swEnvOid=4058

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5086734&swItemId=ob_96666_2&swEnvOid=4058

  or...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5086734&swItemId=ob_92192_2&swEnvOid=4058

  It depends on what chipset your laptop has know what version of the Intel Management Engine Interface (MEI) driver, you need to install, but it will be one of the two.

  If you know what chipset has your laptop, then you can choose one that fits.

  If your laptop is a mobile Intel 6 series chipset, then use the first I posted.

  If it has a mobile Intel 5 series chipset, use the other I posted.