in FaceTime speechless leave the mobile phone... Why?

Similar Questions

• Impossible to send the file from the PC to the mobile phone Nokia 5230 but able to phone

  HI - how will I can send a file from my Nokia mobile to my PC but not the from my PC to my phone?

  It seems that the PC can find my phone as I can say "Yes or no" on the mobile phone to receive and I choose Yes

  After saying yes to the laptop screen: 'Photo could not be sent.

  I got a new phone after sending my old Nokia 5230 for repair and it used to work with my old Nokia 5230

  Yours by

  To be honest I n don't know why you have this problem.
  I tested it with my laptop LG and it works perfectly.

  Here you can see how I sent the picture to my mobile phone using the Toshiba BT stack.

  It works for you?

• I have an iPhone 5 that answering an appeal not heard anything. The problem is solved by rebooting the mobile phone. What is going on?

  I have an iPhone 5 that answering an appeal not heard anything. The problem is solved by rebooting the mobile phone. What is going on?

  Try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Ignore the "Slide to power off" text if it rises. You won't lose anything.

• Satellite A60-124: using the IrDA port to transfer the data to the mobile phone

  Hi, I want to Exchange data between a phone mobile SonyEricsson and my laptop A60 - 124 via an IrDA port. I activated the infrared sensor in the phone but the laptop does not detect anything.

  The device setting menu shows my port Irda ok and seems to be enabled. What should I do?

  I m not 100% sure but I think on some portable computers, you can enable and disable the IrDA port in the BIOS. Check to be sure.

  In the control panel in the IrDA option, you can choose the place where the incoming files must be saved. So if the IrDA connection has been activated on your mobile phone it should work.
  Remember that the mobile phone IrDA window is in the right position.

• I can't connect the mobile phone as GPRS bluetooth modem

  MSI Wind U100 laptop (toshiba bluetooth module is built in)
  MS windows XP Professional SP3
  Toshiba bluetooth stack 6.30.01

  I can't connect the mobile phone as GPRS bluetooth modem. I tried to connect certain phones. But all the time the same problem:

  After finding mobile phone in the list of available devices, notebook coonects him. But at the same time, "coonecting COM 40 failure, try again".

  I've read about this problem in the user manual, but I am not understand, how to solve a problem.

  PS Sorry for my bad English

  I recommend you take a look at the next document if it has never worked before:
  "How to set up GPRS DUN via Custom Toshiba Bluetooth Stack Mode"
  You can find in the section "how to resources" from the following Web site:
  http://APS2.toshiba-tro.de/Bluetooth/

• connection Bluetooth with the mobile phone cannot be established

  HP pavilion laptop g6 with windows 7.

  connection Bluetooth with the mobile phone cannot be established, all drivers were dated until, when it is associated with my phone samsung smart, driver downloads and everything is ready for use.but when click the smart phone

  It shows offline and it said no device ID is given,

  What to do, please help

  my portable BT device is defective? or some other problem, has also tried to connect other phones too, but same problem.

  Rgds,

  Hello

  I just want if sure that you have the right driver installed from this first link provided in the answer from the Support Engineer. If you click this link, then clikc the first option 'Use the device in Windows 7 Troubleshoot utility' need you a paragraph with a link to the appropriate driver.
  I will link here just to make sure.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?swlinkmsg=200&cc=us&DLC=en&docName=c01590950&LC=en&product=5068623&softwareitem=ob-76382-1
  It's the right driver you need. Please verify that this is the one that you have installed and do we know the results.

• component the mobile phone number in the United States since the Skype app on my Android phone?

  I have a Skype Premium account, and I just downloaded Skype on my Android phone. Should I always have the same unlimited voice telephone services (for fixed and mobile phones) for my phone app, like I do on my computer? Or he charge me per minute if I want to make calls from Skype to my phone? Thank you.

  aprado7737 wrote:

  Should I always have the same unlimited voice telephone services (for fixed and mobile phones) for my phone app, like I do on my computer?

  Hello
  Yes, you do.

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• Satellite A500/02U impossible to connect to the mobile phone using BT - defective service detection

  Hello

  I only got my phone a week but when I connect it to my sony phone ericson while see the phone try and pair it but keep "detection of defective service" coming...

  New phones also marks and connects to any bluetooth so his definitely this laptop. driver has only been installed so can't be that... feel that taking the laptop to the shop and have them repaired if I had energy... can anyone help with this?

  Thank you

  Eddie

  Before contacting someone trying to install the last stack of BT.
  Strange is that I found several threads in various forums on this subject, but always with the same mobile phones from Sony.
  If you have time check THIS interesting thread.

• Re: How to connect to the mobile phone via the com port

  Hello
  I have problem with connecting my Nokia n82 (s60) phone to bt via COM port. I want to connect mobiola webcam and need it. Can U help please?

  Hello

  Satellite A300 Vista preinstalled
  Battery Bluetooth version 6.10.07
  Motorola Razor V3 mobile phone

  Not the same mobile phone, but the principle is the same.
  Without doing anything special, I connected my phone to the laptop in a minute.

  Allow BT using FN + F8
  Open Bluetooth settings, click the BT symbol in the taskbar
  Click on new connection
  Select the Express Mode > mode activate Visible on laptop > click OK
  On the new connection wizard, choose phone list and click OK
  When offered choose security PIN (for example, 1234)
  Check connection on mobile phone and enter PIN security
  After the PIN CPM40 control port will be enabled

  Then now is your phone connected to your laptop and you can, for example, transfer files from the phone to the laptop.

  By the way: what model of laptop do you have and which version of battery Bluetooth?

• Satellite M40-237: how to connect the mobile phone with Bluetooth

  I have a new Noki 62333 and I have a Toshiba Satellite M40 - 237. I have a big problem with the connection between them. I put t know how to turn on bluetooth on my pc. Can you help me???

  Hello Iva

  A friend of mine has Satellite M40 and I know that this unit is shipped without BT module. If the unit has BT module, you will find labels of BT on the underside of your laptop.

  To establish a BT connection with his mobile phone that he uses the key USB BT.

  By the way: fact Iva comes from Zagreb, Croatia?

  Good bye

• Satellite Pro 6100: Bluetooth - how to connect the mobile phone

  I already have a satellite pro 6100 with the bluetooth software on. I tried to connect to my mobile phone without success. The problem seems to be with the laptop rather than the phone.
  How can I connect successfully. I have to update the new drivers? I bought it refurbished 3 years ago and I'm just getting round to the use of bluetooth!

  Well, the Bluetooth software has been installed on your laptop, BUT the question is:
  Your group has installed Bluetooth card?

  AFAIK the Bluetooth is an option available on this unit. You must check the Device Manager and check the bottom of the unit if the Bluetooth label has been placed.

  I think that you cannot connect your mobile phone because BT is not available.

• Cannot be displayed on the mobile phone

  I bought a new router which is a pain in the you know what EA6500, I will still have a video look at a problem on mobile phone, I have a Linksys WVC80N camera, when I had the E3000 router I use to display it using my number of service provider Internet IP and Port number, but I can not on this EA6500.  She does everything its supposed to like sending email alerts, but I can't see it on my android phone.

  You must make sure that the AlternateWebAccessPort on the camera is activated. If the use of the port is 1024, you must send the router configuration page. Also make sure that the IP Address of the ISP is the same as before.

  How to configure port forwarding on the Linksys Wireless Smart router using the local access interface

• How do I pair the mobile phone LG rumor 2 for Vista laptop, or how to manually enter the pairing code

  Hello.

  When I try to pair my phone to my laptop, it appears in the add menu.  When I click on it, a window will appear that has a code on it and told me to check the code on the device is the same.  No code appears on my phone.

  How can I manually enter the code?  In my opinion, I know, but no option appears to allow me to enter.

  I tried all the step using the dialog boxes.

  Thank you!

  Hello

  Please use the Windows Vista answers Forum.

  The Bluetooth device you want to pair must be in mode so that it shows the pairing pairing code.

  Consult the owner's manual for the device you want to use to find detailed instructions on how to place the unit in pairing mode.

  1. with the handset closed, press the button on the keyboard to access the main menu. Once inside the menu screen, select the menu "Tools".

  2 on the Tools menu, select the Bluetooth menu and press OK on the possibility of "pair with hands-free."

  3. the handset will start searching for the Bluetooth device. Once found, it will fill in the list of devices. Press OK on the keypad to associate the device.

  4. once the device PIN / access code has been entered (as applicable), the pairing process will be completed. Leave the menu screens and you will be able to start using your Bluetooth device.

  NOTE: A command prompt can display request a PIN of 4-16 (usually 0 0 0 0). If this prompt is displayed, see the owner's manual for the device for use with the handset to determine the AXIS / Pass code

  You can check the link below:

  http://lgknowledgebase.com/kb/index.php?view=entry&EntryID=6264

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Access to the mobile phone HTC WIFI problem

  Hello

  We have Cisco LAP wireless environment, The WLC is WISN (software version is 7.0.98.0), access point is Cisco 1142. We have a user with HTC mobile phone (OS is Android 2.2) can not access the WLAN (WEP key + WEB-based authentication), it must take a lot of time to get the IP address or IP address cannot be obtained. Is there someone have similar problem?

  Best regards

  Jackson Ku

  Glad to know that it works...

  At first I don't think that the problem was the device but conffigured load balancing...

  Well, since you wanted to have certain amount of units in the network, by AP.  If this limit is reached by the AP, brand-new answer association will respond with code 17 the customer tell "hey dude, im complete, look for a different access point", is the customer later new which either decides if he get another one or continues to try to associate with the access point in the box...

  This feature can be used in order to customers balance the load through towers on a single controller. Customers choose the AP based on the client to report Signal to noise (SNR) in this AP and the window of the load balancing.

  Dynamic balancing works in the link phase. If active and the conditions to balance the load, when a wireless client attempts to join a TOUR, association executives of response are sent to the customer with a package of 802.11 response that includes the code of State 17. This code indicates that the PA is too busy to accept any associations.

  It is the responsibility of the customer to honour, process or ignore this frame of response association with reason code 17. Some clients to ignore it, even if it is part of the 802.11 specification. The standard requires that the client driver must seek another AP to connect to since he receives a 'busy' of the first AP message he's trying. Many customers do not do this and send it to the request of the association. The customer in question is allowed on the network wireless during subsequent attempts to associate.

  The controller sends a response with reason code 17 association frame to the client. If the customer decides to ignore the reason code 17, the customer can try the same AP again and this time the PA allows the customer to complete the association.

  If the customer meets the association 17 response status code, the client then tries to associate with a different access point. For example, if balancing is activated and the window of load balancing is configured as five customers, when a sixth client tries to associate to the AP, the client receives a frame of response of the 802.11 Association with 17, status code that indicates that the AP is busy.

  Here is the link on how it works...

  http://www.Cisco.com/en/us/products/ps6366/products_tech_note09186a00809c2fc3.shtml

• Satellite L510 - unable to connect to the mobile phone

  Hi, I have a question and hope to get a solution for everyone! I use Satellite L510 run with Windows vista but the problem is that I can't connect my bluetooth with nokia 5230!

  It can connect to the nokia 7610 and 7610 connect to 5230 also no problem. So I'm just wondering why the laptop can not pair with my 5230! Thank you!

  What error message do you have? What is the last message on the side of the phone before the error occurred?