HP 5514 print white pages
all 4 print cartridges have good levels. paper feeds and looks like it's printing
but everthing comes out empty, even the test page
Hi, I had the same problem, see my previous post. I pulled the power cable at the back of the wireless printer, waited 5 minutes and then put it back. Tried a copy"it worked fine.
Tags: HP Printers
Similar Questions
-
PIXMA MG5320 print white pages
Hello! I have a 3 years, Canon Pixma MG5320, who has started printing blank pages in recent weeks. I don't think that it is no longer under warranty. I changed all four cartridges, did several cleanings and deep cleanings (using about 2/3 of the ink). The nozzle head and print head alignment results are:
Red and blue prints for the head nozzle test and only blue prints for the alignment of the heads. Is there a way I could directly inspect the nozzle head? It is perhaps also an alignment problem? There was another post with a similar problem. Should I just call tech support? Any help would be greatly appreciated, thanks in advance!
Hello.
If some colors are missing after cleanups were conducted, troubleshooting with our support group is needed to narrow down the cause of your problem. Please contact our support group using the link 'Contact us' below for further assistance.
It has not responded to your question or problem? Find more help contact us.
-
new cartridge installed, will not print - white pages, no error message
I just installed a 920 XL Black print cartridge in my Officejet 6500. He prepares the cartridge, press print, and leave the appropriate sounds, but the printed page is empty. I tried this several times, tried to get out and put the cartridge back, same tried
opening and using the second pack XL cartridge, nothing PRINTS. I went to the page of the Web site and it was extremely
useless
There are some 6500 printers, so I am not sure that one you have, but have you found these instructions when you were looking for on the website?
-
HP Photosmart C4680: my Photosmart C4680 is printing only the white pages
Hello
Whenever I try to print something it prints just a blank page.
The paper through the flow and I heard sounds of printing.
I tried to clean the ink cartridges, it did not help.
Please can someone help me with this.
Thank you in advance,
Jamie
I hope that you are well @jamiebally, welcome to the community of HP
I noticed your post on your Photosmart C4680 print white pages and I wanted to stop to share my suggestions to help out you.
Check out this link to fix the problem. If the problem persists, contact HP to see on your replacement options.
The problems of quality of printing to the HP Photosmart C4600-C4700 all-in-one printer series
Click on the thumb to below testify my help!
Click on the "accept as Solution" if I'm you guide to a solution!
Have a wonderful day!
Contact HP:
Step 1. Open the link: www.hp.com/contacthp/
Step 2. Enter the product number or select Auto detection
Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
Step 4. Scroll down and click on: contact HP options - click Get phone number
File number and phone number appear -
HP Deskjet 3050 all-in-One Printer J610a prints blank pages
Your HP Deskjet 3050 print WHITE PAGES?
I hope this post helps you, thank you. If you have any questions about this, feel free to ask.
-
HP Deskjet Ink Advantage 5525: Printing blank pages
Hello
Could someone let me know what can cause problems for printing white pages only.
Those original, changed, I have completely new cartridges for my printer.
When I print the diagnostic quality it prints all colors except black.
I checked everything suggested on the HP support page, but still does not.
Any solution to this problem?
Thanks in advance.
Hey @Vodena,
Welcome to the Forums of HP Support!
I understand that you have some problems with the impossibility to print in black ink of your Deskjet Ink Advantage 5525 e-all-in-one printer. I can help you with that.
To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve print quality problems with your printer.
If after the above, that the printer will print not always black, the printer must be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.
Please let me know the results after following the above. If you are able to print or send to a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.
-
I have that white pages, the document is not printed
I chanched my color ink and now I get only white pages, nothing.
What can I do?
Thanks for riplay
Barbara
I stop the printer and system (do not reset!), yesterday.
Today, I started the PC, then later the printer and PRINT!Thanks for your help
pfudi -
Printer Dell 1100 printed in white when I am on the internet and I want to print any page. The printer works in the office.
I need help please
If it is printed in white on white paper how you see it?
Check your printers settings in his program in place.
-
I use Firefox 12 on Windows XP. Things worked well until just tonight. Now, when I select Print/selection in my email, it spits out multiple (like, maybe 10 or more) blank pages with just a header/foot on them. I followed the instructions for the reset of the printer of Firefox AND setting reset all printer of Firefox settings, and she always does. Everything prints fine in Internet Explorer. This printing problem becomes REALLY painful. I don't want a workaround solution complicated, I just print a selection. NOW why didn't it work?
Assuming you are using the print optimized page (webmail page layouts are quite complex), it's probably question 12 of Firefox that the relative position of the selection on the page is preserved when printing. Not the best way to save paper!
To work around this problem by using an add-on, check out:
https://support.Mozilla.org/en-us/questions/927457#answer-333518
-
Hello. My HP Photosmart D7500 product #Q8440A only prints blank pages. The cartridges are full, and I have Windows XP. I recently installed new ink cartridges. First part of the page prints, but now nothing prints. I tried to align the cartridges, but got the error message "failure". I also tried cleaning the print heads. Looks like it's printing and the paper goes through fine, but no print on this subject appears. Any help would be appreciated. Thank you!
-
the white pages when printing for laserjet pro 200 color MFP M276nw
When printing to my color Laserjet pro 200 M276nw MFP, the pages are all empty. I tried to put off the printer and tried to have disconnected and reconnected. That did not help. The pages are still blank. Any suggestions?
You are unable to print the 'print quality Page' of the façade or do not know how?
-
When printing/copying pages come out white on hp psc 2175
When I print or copy printer treats a page like it's printing, but the pages are blank. The ink cartridges are new and the print head (?) goes on the page, as it is printing. The printer is an hp psc 2175 and I use windows 7. The last thing I did on this printer, before it would not print/copy was to scan several documents by using Windows Live Photo Gallery, and that analyzed correctly. What can I do to get it to print/copy again?
Thank you!
Hello oldprinter01
Please try the following article, as it can help solve the problem you.
-
Brand new 710 6500 of Macbook pro OS 10.6 arrested after printing 10 pages
computer sends something to the printer, need the paper and the print head moves as it should be printing, but no ink comes out at all. White pages. Same thing happens with several different programs, Entourage, excel - he has worked for 10 pages. Test page prints correctly. Can also print machine fine Winxp.
Printer restarted, rebooted the computer, reinstalled the drivers, then uninstalled all the HP software and reinstalled, then read this forum and reset the list of printers. Anything not fixed so far.
I am in security, have not tried to talk to HP yet, but tomorrow. Try here first.
Thanks in advance.
Thanks PrintDoc, I forgot to mention in my post that I also included this step in the middle of everything I did without effect.
However, I got on the phone earlier with support and we have deleted and reinstalled everything and it works now.
-
I print mostly black and white documents. I recently had 2 ink color of defamation in the pages that are supposed to be just in black and white printed. The first was the magenta, and it might discolor the entire page. The second was yellow, and it could fade just the left and right margins. It was two cartridges to Cartridge World, and they have done very well for some time after the installation or always had plenty of ink left when this problem occurred. The manager at Cartridge World has estimated that perhaps the part of the waste of the cartridge has been complete over time and flees to the ink. He said that for most black and white print still causes the drum on the cartridges of color to turn and empty the little ink in waste room. His suggestion was to get a second monochrome printer for most usage of my impression and just this HP product when the color is required. Who is? Other suggestions? If I replace the suspicious cartridges, print returns to normal, at least for a while.
Hi @la1959,
Welcome to the HP Forums!
I see that your HP LaserJet Pro 200 M251nw, color of ink smear on black and white page after some use. I'm happy to help with this problem!
According to the website of Cartridge World, http://www.cartridgeworld.com, it seems to me that these cartridges are rebuilt (refills). And, the information in this guide, can I refill the ink in my HP ink cartridge? States:
Yes, you can. But what do you want? QualityLogic, one of the organizations of quality foremost in the world, has tested the performance of HP refurbished vs brand inkjet print cartridges (filled). Results: original HP inkjet cartridges ink far surpassed refills in print quality and reliability of printing. -
Print last page blank, how to avoid the last page to print, using NiReport
Hi all
I use NIReport to generate report/Print.
I have problem
I have a page to print,
I wrote until the last line
Problem is that NEITHER report adds a new, blank page, which is not necessary.
This problem n, t occur when we write in the last row or left white.
Note: I also have a header and footer details
It will be printed on the blank page.
When NIReport understand specific text is last line of the page, then NIReport automatically add the new page in the template.
How to avoid printing the last white page in NIReport?
Thank you
Mukesh Kumar
Just a guess: you use AppendLine? If so, you can try to move on AppendText to write the line, adding of newline as the first call when you need to start a new line. AppendLine adds a new line to the report after printing the line, and this can generate a blank page if you write to the last line on the page.
Maybe you are looking for
-
Satellite U500 - copy process is very slow
Hi friends, I use the Satellite U500-1f5, for the last 2 months. It's core i5 with Windows 7. The copy process is still very slow and sometimes starting is a bit slower. Can someone show a valid answer for this problem?
-
LV2010: bug in writing express vi?
Hello I have software that works very well in LV8.6 and I got the (bad?) ideea upgrade to LV 2010. After make an exe with LV2010 this program is no more (the error is to save it to file express vi). I can reproduce this error on two different compute
-
Acer Aspire E5 - 571 - 371W Bluetooth problem
Hello I can't find one of my bluetooth devices (activated) when I tried to 'add a device' in the community win10, devices. I installed a bluetooth driver and it is supposed to be uptodate. I tried FN - F3 but in vain. Please advise, Edennehy
-
Not a win32 application invalid during the Windows 7 upgrade download
I am trying to download windows 7 upgrade advisor, and it is not a valid win32 application. I am currently running xp, 32 bit. Help, I want to get windows 7. original title: not a win32 application valid?
-
need to install a host controller universal usb highspeed for my hi-speed devices
I still see a warning that (my device could perform fi more fast it was connected to hi speed U.S.B?)